Error Output In Oledb Command Advance Editor
Sep 27, 2007
I have a data flow and inside the data flow , i have a ole db source and ole db command task to execute an insert transaction ( SP).. i would like to save the error output if the insert didn;t happend into a error log table..
but when I darg an error output line ( red) to another ole db command to insert an error log , i can only see two columns( error code and error column) are available in OLEDB command advance editor related to errors.. this doesn;t tell you much information about the error.how can i grap the error reson(desc) as the error output and store into a erro log table? so that i can see what the problem is?
View 1 Replies
ADVERTISEMENT
Feb 13, 2008
Hi,
I have two tables,
Table A on Server 1 (3 ROWS)
ID Name Address
ID1 A B
ID2 X Y
ID3 M N
There is another table on a different server which looks like
Table B on Server 2
PKColumn ID Details
1 ID1 Desc1
2 ID1 Desc2
3 ID1 Desc 3
4 ID2 Desc
5 ID2 Description
As you can see the ID is the common column for these two tables,
I want to get the Query the above 2 tables and the output should be dumped into a new table on Server2.
I am using the following SSIS Package
OledbDataSource-------> OledbCommand(Select * from TableB where ID =?)
From here, how can insert the rows returned from the oledb command into another table.
Since, for each row of TableA it will return some output rows...How can I insert all these into the New Table.
Please help on configuring the output of the oledb command.
Thanks,
View 5 Replies
View Related
Jun 5, 2007
Hello
This is my first post so please be gentle!!
I have a stored proc that returns a value:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
SET NOCOUNT ON
GO
-- =============================================
ALTER PROCEDURE [dbo].[spPK]
-- Add the parameters for the stored procedure here
@varNSC varchar(4),
@varNC varchar(2),
@varIIN varchar(7),
@varIMCDMC varchar(8),
@varOut as int output
AS
Declare
@varPK int
set @varPK = 0
BEGIN
--This checks Method 1
--NSC = @varNSC
--NC = @varNC
--IIN = @varIIN
begin
if exists
(select Item_id
From Item
Where NSC = @varNSC
and NC = @varNC
and IIN = @varIIN)
set @varPK =
(select Item_id
From Item
Where NSC = @varNSC
and NC = @varNC
and IIN = @varIIN)
set @varOut = @varPK
if @varPK <> 0 Return
end
[There are some more methods here]
Return
END
How do I get at the output value?
I have tried using derived column and ole db command but can't seem to grasp how to pass the value to the derived column. I can get oledb command to run using 'exec dbo.spPK ?, ?, ?, ?, ? output' but don't know what to do from here.
View 10 Replies
View Related
Nov 7, 2015
I want to call "oracle" stored procedure with output parameter from SSIS ole db command task.
Actually I am able to successfully call the procedure but my Output value is not updating in the mapped column.
I used below PL/SQL query.
DECLARE
IS_VALID VARCHAR2(200);
BEGIN
IS_VALID(
PARAM1 => ?,
PARAM2 => ?,
IS_VALID => IS_VALID
);
? := IS_VALID;
END;
If I try to supply "OUTPUT" word I get error:
"ORA-06550: line 1, column 45:
PLS-00103: Encountered the symbol "OUTPUT" when expecting one of the following:Â Â . ( ) , * @ % & = - + < / >"
BEGIN
IS_VALID(
?,
?,
? OUTPUT
);
END;
how to receive output parameter value of oledb command while calling oracle stored procedures.
View 4 Replies
View Related
Aug 21, 2007
We are having package which transfers data from AS/400 to SQL server 2005, the source component is a data reader which connects to the AS/400 and pulls the data and some transformation are being made and then finally Oledb command is used which uses a Stored Procedure to Insert/Update the records.
The Packages transfers nearly 2,00,000 records, but after transferring some records we get the following error:
Error: 0xC0202009 at dftJDE_CUSTOMER_ORDER_ITEM, olc_JDE_CUSTOMER_ORDER_ITEM_InsertUpdate [199]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. The RPC name is invalid.".
Error: 0xC0202009 at dftJDE_CUSTOMER_ORDER_ITEM, olc_JDE_CUSTOMER_ORDER_ITEM_InsertUpdate [199]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. The RPC name is invalid.".
This same error is getting repeated many times. Anyone have come across this problem, any help appreciated. Thanks in advance.
View 1 Replies
View Related
Nov 6, 2007
This might be an ignorant question, but I can't figure this out.
What is the purpose of the Error output data flow from the OLEDB Source? I am trying to understand an example of what kind of "error" would cause a row to go down this path, and I can't come up with one.
Does anyone have a good example of how this could be useful?
View 5 Replies
View Related
Dec 20, 2007
I'm receiving an Error Code: 0x80004005 ... a "non-specific error" when trying to use a fairly simple insert in the oleDB command transform. SQL command works fine if I specify the parameters in the values clause of the INSERT statement. If however, I try to use the parameters in setting a variable, I get the 0x80004005 error. Is this a known issue/limitation, or am I just reallly doing something wrong?
View 4 Replies
View Related
Jul 13, 2006
I have created a sample dataflow to parse the employee details (empid,empname,empaddr) from a flat file to oracle 9i database table named employee(columns : empid,empname,empaddress - All are varchar2(15)) using SLOWLY CHANGING DIMENSION transformation for insert/update on the table.
EMPID as Businees key
EMPNAME and EMPADDR as changing attributes.
Connection string is using Microsoft oledb provider for oracle.
I am getting the following oledb command error.
-----------------------------------------------------------------------------------
TITLE: Microsoft Visual Studio
------------------------------
Error at Data Flow Task [OLE DB Command 1 [2007]]: An OLE DB error has occurred. Error code: 0x80040E51.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E51 Description: "Provider cannot derive parameter information and SetParameterInfo has not been called.".
Error at Data Flow Task [OLE DB Command 1 [2007]]: Unable to retrieve destination column descriptions from the parameters of the SQL command.
Warning at {CF5DCB64-279E-45A4-A9A8-FF2FBB130980} [Insert Destination [1972]]: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
------------------------------
ADDITIONAL INFORMATION:
Errors were encountered while generating the wizard results:
Error at Data Flow Task [OLE DB Command [1996]]: An OLE DB error has occurred. Error code: 0x80040E51.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E51 Description: "Provider cannot derive parameter information and SetParameterInfo has not been called.".
Error at Data Flow Task [OLE DB Command [1996]]: Unable to retrieve destination column descriptions from the parameters of the SQL command.
Error at Data Flow Task [OLE DB Command 1 [2007]]: An OLE DB error has occurred. Error code: 0x80040E51.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E51 Description: "Provider cannot derive parameter information and SetParameterInfo has not been called.".
Error at Data Flow Task [OLE DB Command 1 [2007]]: Unable to retrieve destination column descriptions from the parameters of the SQL command.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=ScdWizardGenerationErrors&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
View 4 Replies
View Related
Jul 26, 2007
Hi All,
I have an OLEDB command in my package that has to execute some SQL script.
But when I declare and set a variable at the top of all code, The OLEDB gives an error in column mappings tab.
My DQL script is as shown below
DECLARE @Cost AS money
SET @Cost=?
--Some update statements a table
OLEDB Command works if write the declare and set statements after update statements. Like below. But I don€™t need it.
--Some update statements a table
DECLARE @Cost AS money
SET @Cost=?
I also observer that,Oledb Command gives error for the code given below.
Just paste the following Script in OLEDB command, it gives error in column mapping tab
DECLARE @Cost AS money
SET @Cost=?
Any Idea on this behaviour?
Thanks in advance..
View 3 Replies
View Related
Mar 23, 2006
Can i extend the "Query Builder" dialog of OLEDB Source Editor for developing custom source component?
View 1 Replies
View Related
Apr 21, 2006
I have a data flow that takes an OLE DB Source, transforms it and then uses an OLE DB Command as a destination. The OLE DB Command executes a call to a stored procedure and I have the proper wild cards indicated. The entire process runs great and does exactly what is intended to do.
However, I need to know when a SQL insert fails what record failed and I need to log this in a file somewhere. I added a Flat File Destination object and configured appropriately. I created 3 column names for the headers in the flat file and matched them with column names existing for output. When I run this package the flat file log is created ok, but no data is ever pumped into the file when a failure of the OLE DB Command occurs.
I checked the Advanced Editor for the OLE DB Command object and under the OLE DB Command Error Output node on the Input and Output Properties tab I notice that the ErrorCode and ErrorColumn output columns both have ErrorRowDisposition set to RD_NotUsed. I would guess this is the problem and why no data is written to my log file, but I cannot figure out how to get this changed (fields are greyed out so no access).
Any help would be greatly appreciated.
View 3 Replies
View Related
Dec 7, 2006
I am working on a situation similar to 'Get all from Table A that isn't in Table B' http://www.sqlis.com/default.aspx?311
I noticed that if one column's name of source table changes,(say Year to Year2) I have to modify all 'data flow transformations' in the task.
I am new to SSIS.
thanks! -ZZ
View 8 Replies
View Related
Jul 14, 2006
Instead of blindly inserting all my data from a previous task into a table using "Table" as the Data Access Mode in the OLEDB Destination editor. I would like to join this output with a reference table and insert only qualifying rows. Question is "how do I access the data from previous task so that I can do a meaningful equijoin" ? I know I have to use the "SQL Command" data access mode, but what next ?
Thanks.
chiraj
View 12 Replies
View Related
Jun 21, 2006
Can I add Output Columns to the Script Transformation Editor using code? I have to execute a SQL Statement to determine the number of years we have the data for for an item and then create the columns for the months in those years and populate them with the quantities. So my question is can I create output columns to the Script Transformation Editor on the fly that is as it is being executed?
Any input will be good.
Thanks,
MShah
View 3 Replies
View Related
Dec 8, 2006
I am working on an OLAP modeled database.
I have a Lookup Transformation that matches the natural key of a dimension member and returns the dimension key for that member (surrogate key pipeline stuff).
I am using an OLE DB Command as the Error flow of the Lookup Transformation to insert an "Inferred Member" (new row) into a dimension table if the Lookup fails.
The OLE DB Command calls a stored procedure (dbo.InsertNewDimensionMember) that inserts the new member and returns the key of the new member (using scope_identity) as an output.
What is the syntax in the SQL Command line of the OLE DB Command Transformation to set the output of the stored procedure as an Output Column?
I know that I can 1) add a second Lookup with "Enable memory restriction" on (no caching) in the Success data flow after the OLE DB Command, 2) find the newly inserted member, and 3) Union both Lookup results together, but this is a large dimension table (several million rows) and searching for the newly inserted dimension member seems excessive, especially since I have the ID I want returned as output from the stored procedure that inserted it.
Thanks in advance for any assistance you can provide.
View 9 Replies
View Related
Oct 25, 2007
Greetings everyone,
I am seeing a particular problem in the XML Source Editor "Columns" configuration where it is not persisting the "Output name" selection.
Control Flow Tab:
1. I use a "Exec SQL Command" to drop, create, or alter the destination tables in the database that I want to be repository for the inbound XML data. The data types are fairly straightforward.
2. I add a singular "Data Flow"
Data Flow Tab:
1. I add a "XML Source" task, and assign a well-defined XML file. I then use the "Generate XSD" option in the "Connection manager"; and I am fairly satisfied with the generated XSD.
2. I create "OLE DB Destination"
3. I wire the "XML Source" to the "OLE DB Destination". In the "XML Source" in the "Columns".
4. I go to the dropdown list of "Output name" and see the list ordered with the various complex-types that I want to map and transfer to a target table.
For the sake of this report, I select the 5th one down on the list (for which I already have a target table) - let's call this "Mesh"
5. In the "Input Output" dialog, I select the "output" to be the desired 5th item, "Mesh"
6. I check all my mappings so that they map one-to-one ... XML name entries match SQL table destination mapping entries; correct types; correct size
7. Check the metadata and it all looks good.
8. When I hit "Debug" to test the package the failure occurs at the "XML Source". The error report comes back saying that it failed because "field xxx in Contributor was truncated". However, "Contributor" corresponds to the 1st name in the dropdown list presented in "Columns" "Output name:".
If I select return to Step 4, when I open up "Columns" I see that my previous selection of the 5th item on the list named "Mesh" was not persisted, but invariably and no matter how often I select item #5 "Mesh" and save to ensure that selection sticks, it is not persisted.
I hand-edited the .dtsx file and only then was I able to make this stick. However, if I ever re-save the package this non-persistency pops up again.
Am I doing something wrong here or is this a known defect? As I have several dozen XSD mappings that I want to transfer to tables, hand-editing is not something I relish.
I look forward to your reply.
RudyC
View 1 Replies
View Related
Aug 26, 2015
I'm trying to execute a simple VBS file from the Executable command line in the Execute Process Task Editor.
My line is this : cscript.exe "c:convertcsvssisXlsToCsv.vbs"
SSIS keeps saying there are illegal characters here. Â I've Googled and looked about 20 articles and I can't resolve it.
I have a ForEach that loops through Excel files and changes them to CSV files using code i found. This script takes an original Excel file and transfers it to a new CSV file in a new directory.
So in DOS at the CMD line I would type : XlsTocsv.vbs originalfile.xls newfile.csv
I have the original file and new file in the Arguments line so I'm assuming that after the script executes it will look at the filepaths in the loop and loop through them so I want it do to this when it runs:
XlsTocsv.vbs [User::@ExcelFile] [User::@CSVFile]
I just can't get it to execute and I keep getting illegal characters. Â
View 5 Replies
View Related
Mar 20, 2007
I am transfering large data.
I use oledb command to insert and update as i need to make some modifications to incoming data.I do my modifications in the procedure.
But the command does not insert as the data is huge at one shot.
if i try to send small data it works fine
Its shows warning(yellow color)
How can i achive inserting huge data effeciently please help.
View 4 Replies
View Related
Oct 10, 2006
Hi all,
I got an error when i do an OLE db Source pointing to an sql 2000 database and executing a sql query inside the OLE Source. The ole source will point to an OLE DB destination which is an sql 2005 database.
But i got the below error:
Error at Data Flow Task [OLE DB Destination [245]]: the column firstname cannot be processed because more than one code page (936 and 1252) are specified for it.
Error at Data Flow Task [DTS.Pipeline]: "component "OLE DB destination" (245)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow TaSK: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
View 5 Replies
View Related
Aug 29, 2006
Hi,
I'm stuck on the following thing:
After a slowly changing dimension task I replaced the OLE DB Destination task by an OLE DB Command and created the insert manually. This because I need to work further on the dataset. So I do a union all between the output of the two OLE DB Commands (insert and update). Untill here no problem. But than, because I need an ID further on, I do a lookup in the table in which I just inserted and updated my data for the right ID's. When I run this project I get the error message "row yielded no match during lookup".
I don't understand this beacause I just inserted the data and I've checked, it's there.
I could resolve this by splitting up in two control flows (reselect all the needed data wÃth the ID-field in my selection) but I would prefer to solve it in another way
Greets,
Tom
View 12 Replies
View Related
Mar 27, 2007
I AM working on DW building and i m using SSIS.I haev problem with data transformation OLEDB command.I have written a query to clean data in OLEDB command box ,but it takes whole lot of time because at a time it slects 6000 rows from the source and put in to destination but i have 300000 rows to process.How can i increase the size.
View 4 Replies
View Related
Jan 10, 2006
Hello,
I have an issue with the OLEDB Command in a package of mine where it used to work and now it doesn't. I had 4 different packages where I was bringing in a flat file, massaging the data, and calling 1 of 4 Stored procedures using the OLEDB Command. Everything was working great, then we decided to use the SSIS EBCDIC conversion in the flat file connection rather than converting to ASCII outside of SSIS. This wasn't a problem for 3 of the 4. The one I have an issue with seems to be somehow corrupt, I keep getting the error "Invalid character value for cast specification", as well as "DBSTATUS_UNAVAILABLE", for a particular column. When I re-map that column in the OLEDB Command task, re-run the package, it then tells me a different column has the exact same error. So in going through and re-mapping all of the columns, it goes back to the 1st column I had an error with and gives me the exact same error... ARRRGGGGHHHH!!!!
It seems like something is corrupt in SSIS or something. Does anyone have any thoughts, other than re-writing the package from scratch?
I know there's no issue with the data, I imported the same file into a test table without problems.
View 5 Replies
View Related
Sep 27, 2007
Group,
First let me say that I'm new to SSIS, so be gentle with me.
I need to extract a limited set of data from a very large view in Oracle (I know, yuk!). The view contains millions of rows, but I only need the child matches of 343 unique keys in a one to many relationship. In pure SQL the query would look something like this.
Select proj, tn, rn, total FROM Oracle.view WHERE proj in (select distinct proj from MSSQL.dbo.projlist)
As you can see, this is an impossible query on many levels.
My first thought was to get the runtime list into a variable and use that variable as a parameter in the Oracle OleDb Source. Alas, the Oracle source will not allow me to add a parameter.
My second thought was to use a script component and build a SQL_Command string into a variable with all of my keys included. Then use the read_write variable as the SQL Command from variable in the Oracle Source. My attempts to construct such a variable expression have failed.
Any ideas would be appreciated.
RH
View 11 Replies
View Related
Jan 9, 2007
Hi there,
In order to prevent lookup errors in a lookup transformation, I've decided to go for an OleDb Command Transformation.
This transformation should check the lookup and, if it turns out to be null, ir returns a dummy value. Otherwise, it would return the lookup value.
This should be done by doing something like this:
select coalesce( (select ID_Table2 from ID_Table2 where FK_Table1 = ?), 0)
suposing Table2 has an atribute called "FK_Table1" that should match a column in the data flow.
Now, such command result in this message:
"An OLE DB record is available. Source "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Syntax eror, permission violation, or other nonspecific error".
But, it I remove the coalesce and type the following command:
select ID_Table2 from ID_Table2 where FK_Table1 = ?
It presents me no errors and allows me to continue.
Did i did anything wrong or is this something that is not possible to be done?
I know i have the option to use a script task to do this operation, but that would turn the maintenance process a little more difficult.
Otherwise, i know i could also re-direct the error from the lookup transformation and handle it. Though, my package has about 10 lookups and that would turn my package a lot more complex than
Thanks in advance
Best Regards
André Santana
View 6 Replies
View Related
Dec 3, 2007
Hi All,
I am using OLEDB Command transformation in a data flow to update the table. Find the columns for the table EMP as follows.
EmpID - int
EmpName - varchar(40)
EmpSal - float
Status - varchar(20)
I am using the following command to update the table.
Update EMP set status = 'Disabled' where EmpID = ? and EmpSal = ?
when I use the above condition the type of the second parameter is taking as "double precision float" as the incoming input column type is "double - precision float". This is fine.
But when I use the following condition the type of the param is taking as different one.
Update EMP set status = 'Disabled' where EmpID = ? and ( EmpSal + ? ) = 0
It is taking as "four byte signed integer" even though the incoming input column type is "double precision float" thus I am loosing the precision and getting error when the limit exeeds. If I use 0.0 then it is taking as "Numeric" type.
If I use convert function like (EmpSal + ? ) = Convert(float, 0) then it is taking as "double precision float".
Update EMP set status = 'Disabled' where EmpID = ? and ( EmpSal + ? ) = Convert(float, 0)
My question is how it behaves in the above situation. Can any body clarify please?
Venkat.
View 1 Replies
View Related
Oct 31, 2007
I have a stored proc with 28 commmands but only 24 are loaded. If I move the parameters around the ones that didn't show are visible and the ones after the 24th parameter don't show up. Is there some sort of limit on parameters for OLEDB commands that execute stored procs in the exec procname @p = ? construct?
View 3 Replies
View Related
Dec 11, 2006
HI,
I want to use the OLEDB command to call a oracle function, but i havnt found any materials about how to do that, my oracle function is as below:
CREATE OR REPLACE function GET_ZONEID_FROM_SYFZ(ycz varchar2,xc varchar2,strat_id varchar2)
return varchar2 IS
zone_id_result varchar2(10) ;
begin
PKG_DM_DQ.GET_ZONEID_FROM_SYFZ(ycz,xc,strat_id,zone_id_result);
return zone_id_result;
end;
In OLEDB command transformation component, i fill the sql command with "select GET_ZONEID_FROM_SYFZ(?,?,?) from dual", but i dont have it worked.
The error message is :provider can not derive parameter information and setparameterinfo has not been called.
Who have any idea about how to make it work?
Thanks ~~
View 7 Replies
View Related
Nov 15, 2007
HI,
In my mapping i have used one OLEDB command which updates a table.
It updates 70 columns of that table.
The problem is that it is taking long time to execute that(almost 15-20 minutes)
It is updating almost 3k-5k rows.
I tried to put the update statement in SP and called that in OLEDB command.
Still it is taking same time.
Please advice how to solve this problem.
Thanks in Advance.
View 6 Replies
View Related
Dec 11, 2007
We have SS2K5 source and DB2 Target. I downloaded and installed MS OLE DB provider for DB2. It is configured correctly. The data insert works fine. But I am having problem with update/delete on DB2 when passing string parameters.
The OLEDB command works fine when I hard code the values:
delete from TableName where Col1='abc' and Col2='xyz'
But when I use parameters the package executes successfully, but the data is not delete on DB2.
Any one having similar experience or solution for this is really appreciated.
Thanks,
View 7 Replies
View Related
Feb 17, 2008
is it true that I will not be able to use the returned value from an sp that is called on every row from an oledb command transformation? I see all kinds of complaints on the web but cant determine if this would be a waste of time. I'd like to append the returned value (which is calculated and cannot be joined in the buffer) to the data on its way out of the transformation.
View 3 Replies
View Related
Mar 13, 2008
Hi
How to use a global variable of a package inside oledb command
Scenario:
Glb_Rowcount Variable
I need to use this variable value inside oledb command.
P.S: No use of stored procedures and no script component
View 4 Replies
View Related
Apr 24, 2008
Hi All,
In one of my interfaces,i am trying to Stage data in a ##table from a Flat file,so that i can iterate through the data in for each loop afterwards.
I have written a stored Proc to do this.But what i am observing is in the ##Table only the last Row will be persisted.
The SP looks like this
Code Snippet
CREATE PROCEDURE USP_SVInsS093Data_V001
@DetailRECTYPE nvarchar(5),
@StoreNumber int,
@Product nvarchar(20),
@Planogramref nvarchar(20),
@DisplayGroup nvarchar(5),
@ModSequence int,
@Shelfnumber int,
@Productposition int,
@StartModnumber nvarchar(20)
AS
SET NOCOUNT ON
BEGIN
if object_id('tempdb..##S093_TempTable') is not null
drop table ##S093_TempTable
CREATE TABLE ##S093_TempTable(
[DetailRECTYPE] [nvarchar](5) NULL,
[StoreNumber] [int] NULL,
[Product] [nvarchar](20) NULL,
[Planogramref] [nvarchar](20) NULL,
[DisplayGroup] [nvarchar](5) NULL,
[ModSequence] [int] NULL,
[Shelfnumber] [int] NULL,
[Productposition] [int] NULL,
[StartModnumber] [nvarchar](20) NULL
)
INSERT INTO ##S093_TempTable
([DetailRECTYPE]
,[StoreNumber]
,[Product]
,[Planogramref]
,[DisplayGroup]
,[ModSequence]
,[Shelfnumber]
,[Productposition]
,[StartModnumber])
VALUES
( @DetailRECTYPE ,
@StoreNumber ,
@Product ,
@Planogramref ,
@DisplayGroup ,
@ModSequence,
@Shelfnumber ,
@Productposition ,
@StartModnumber
)
If i have a select query after the Data Flow task only the last row is returned.
Now how to make the ##Table keep all the rows.
Any help will appreciated.
Thanks in Advance...
Cheers
Srikanth Katte
View 8 Replies
View Related
Jul 5, 2006
I need to extract rows using date as parameter... where source contains millions of rows but few thousands per date.
I tried using SQL command in data access mode in OLE DB Source Editor but having problem with passing parameter...
Anyone has solution?
View 10 Replies
View Related
