I am trying to return a variable from a dynamic SP -
declare @v_outvarchar(400)
...
execute ("select @v_out=" + @v_column + " from " + @v_table_name + " where " + @v_key_sql)
I get the following error:
Server: Msg 137, Level 15, State 1, Line 1
Must declare the variable '@v_out'.
Any idea how to fix this?
Carl
Created a stored procedure which returns Selected table from database.
I pass variables, according to conditions
For some reason it is not returning any result for any condition
Stored Procedure
ALTER PROCEDURE dbo.StoredProcedure
(
@condition varchar(20),
@ID bigint,
@date1 as datetime,
@date2 as datetime
)
AS
/* SET NOCOUNT ON */
IF @condition LIKE 'all'
SELECT CllientEventDetails.*
FROM CllientEventDetails
WHERE (ClientID = @ID)
IF @condition LIKE 'current_events'
SELECT ClientEventDetails.*
FROM ClientEventDetails
WHERE (ClientID = @ID) AND
(EventFrom <= ISNULL(@date1, EventFrom)) AND
(EventTill >= ISNULL(@date1, EventTill))
IF @condition LIKE 'past_events'
SELECT ClientEventDetails.*
FROM ClientEventDetails
WHERE (ClientID = @ID) AND
(EventTill <= ISNULL(@date1, EventTill))
IF @condition LIKE 'upcoming_events'
SELECT ClientEventDetails.*
FROM ClientEventDetails
WHERE (ClientID = @ID) AND
(EventFrom >= ISNULL(@date1, EventFrom))
IF @condition LIKE ''
SELECT CllientEventDetails.*
FROM CllientEventDetails
RETURN
Also I would like to find out if I can put only "where" clause in if condition as my select statements are constants
I'm seeing where previous developers have used a single stored procedure for multiple reports, where each report required different columns to be returned. They are structured like this:
CREATE PROCEDURE dbo.GetSomeData (@rptType INT, @customerID INT)
AS
BEGIN
IF @rptType = 1
BEGIN
SELECT LastName, FirstName, MiddleInitial
[Code] ....
As you can see, the output depends on the given report type. I've personally never done this, but that's more because it's the way I learned as opposed to any hard facts to support it.
So what I'm looking for is basically 2-fold.
Ok, so I have this stored procedure that Inserts a record and I need to return the ID inserted to pass to another procedure. I ended up having to use sp_executesql because I need to dynamically add the schema to the table. The issue that I am having is that the variable that I try to pass to the other procedure always ends up null, but it shows the correct output. Just to clarify on this, i am an Applications developer and not a DBA so I may be going about this all wrong. Any help on this would be greatly appreciated.
Here is the SP
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[sp_AddAnalyte]
@Analyt NVarChar(100),
@LName NVarChar(100),
@AtomicNum NVarChar(100),
@AtomicMass NVarChar(100),
@Weight NVarChar(100),
@HalfLife NVarChar(100),
@Units NVarChar(100),
@HF_Secs NVarChar(100),
@Gas NVarChar(100),
@Nat NVarChar(100)
AS
DECLARE @ID INT,@i INT
DECLARE @schema VarChar(50)
DECLARE @sql NVARCHAR(512)
BEGIN
SET @Schema = (SELECT schema_name())
SET @sql = N'INSERT INTO [' + @schema + '].[Analytes] ([Analyte],[LongName],[AnalyteType]) VALUES (''' + @Analyt + ''',''' + @LName + ''',1)';
EXEC sp_executesql @query = @sql;
SET @sql = N'SELECT MAX(AnalytePK) FROM [' + @schema + '].[Analytes]';
EXEC sp_executesql
@query = @sql,
@params = N'@ID INT OUTPUT',
@i = @ID OUTPUT
EXEC sp_AddParameterValue 6, @i, 'AtomicNum', @AtomicNum, '';
EXEC sp_AddParameterValue 6, @i, 'AtomicMass', @AtomicMass, '';
EXEC sp_AddParameterValue 6, @i, 'Weight', @Weight, '';
EXEC sp_AddParameterValue 6, @i, 'HalfLife', @HalfLife, '';
EXEC sp_AddParameterValue 6, @i, 'Units', @Units, '';
EXEC sp_AddParameterValue 6, @i, 'HF_Secs', @HF_Secs, '';
EXEC sp_AddParameterValue 6, @i, 'Gas', @Gas, '';
EXEC sp_AddParameterValue 6, @i, 'Natural', @Nat, '';
END
Hi I'm new to MS SQL and trying to write a very small dynamic stored procedure which is giving me a headache.
What I have is:
CREATE PROCEDURE busy_report
@TableName varchar(255),
@reporteddate datetime=NULL
AS
if @reporteddate is null
select @reporteddate = CURRENT_TIMESTAMP
-- Create a variable @SQLStatement
DECLARE @SQLStatement varchar(255)
SET DATEFORMAT dmy
-- Enter the dynamic SQL statement into the
-- variable @SQLStatement
SELECT @SQLStatement = "SELECT vendor, reporteddate, count(vendor) FROM " +
@TableName + "WHERE reporteddate = ' "
+ @reporteddate + " '"
-- Execute the SQL statement
EXEC(@SQLStatement)
GO
The error I keep getting is:
Server: Msg 8114, Level 16, State 4, Procedure busy_report, Line 0
Error converting data type varchar to datetime.
Any ideas appreciated.
(Edit:)
I've also tried it this way:
CREATE PROCEDURE UK_busy_report
@TableName varchar(255),
@reporteddate datetime=NULL
AS
-- Create a variable @SQLStatement
DECLARE @SQLStatement varchar(255)
SELECT @reporteddate=CONVERT(datetime, @reporteddate)
IF @@ERROR <> 0 BEGIN
/* Do some error processing */
PRINT 'Error Occured' END
ELSE
-- Enter the dynamic SQL statement into the
-- variable @SQLStatement
SELECT @SQLStatement = "SELECT vendor, reporteddate, count(vendor) FROM " +
@TableName + "WHERE reporteddate = ' "
+ @reporteddate + " '"
-- Execute the SQL statement
EXEC(@SQLStatement)
GO
Which gives me the same error!
.logic.
I hvae a stored procedure that has this at the end of it:
BEGIN
EXEC @ActionID = ActionInsert '', @PackageID, @AnotherID, 0, ''
END
SET NOCOUNT OFF
SELECT Something
FROM Something
Joins…..
Where Something = Something
now, ActionInsert returns a Value, and has a SELECT @ActionID at the end of the stored procedure.
What's happening, if that 2nd line that I pasted gets called, 2 result sets are being returned. How can I modify this SToredProcedure to stop returning the result set from ActionINsert?
I'm sending a stored procedure a number of parameters, including an int for a foreign key field. I'm trying to dynamically build the Where Clause of the query.
I'm getting the error:
Syntax error converting the varchar value 'wo_dutfk = ' to a column of data type int.
NOTE: wo_dutfk is an int field within the WO table.
Here's the code:
CREATE PROCEDURE dbo.ewo_sp_WOLookup
(
@WODUTFK int=NULL,
@WOENDDATE datetime = NULL,
@WOSTATUS char(10) = NULL,
@DEBUG int=0
)
AS
Declare @intErrorCode int,
@chvQuery varchar (8000),
@chvWhere varchar (8000)
select @intErrorCode = @@ERROR,
@chvQuery='SET QUOTED_IDENTIFIER OFF select * from WO',
@chvWhere=''
-- DUT is specified
If @intErrorCode = 0 and @WODUTFK is not NULL
Begin
set @chvWhere = @chvWhere + 'wo_dutfk = '+@WODUTFK
End
IF @intErrorCode=0 and Len(@chvWhere)>0
Begin
set @chvQuery = @chvQuery + ' WHERE ' + @chvWhere
select @intErrorCode=@@ERROR
END
IF @DEBUG<>0
select @chvQuery Query
IF @intErrorCode=0
Begin
exec (@chvQuery)
select @intErrorCode=@@ERROR
End
return @intErrorCode
GO
---
Any suggestions on how to fix?
Thanks,
peter
I have created stored procedure to find out first word of the keyword. I am getting error below on execution:
"Must declare the scalar variable "@SubjectBeginning"."
This query was run against a database on 2008 SP3 and 2012 SP2
Here is an example of what I ran
Declare @A_number varchar(5)
Select Top 1 Column_Is_an_int = @A_number
From Our_Main_Table
Where A_Database_Name = 'A database with many records in this table and multiple records in the Column_is_an_int some are more than 5 characters'
Select @A_number
Exec My_Stored_Proc @A_Nmuber
The top result for that database had an integer that was 8 characters including the - sign.
When the query ran I would normally expect it to throw the binary data cannot be truncated error. However in this case it returned a * in the variable which then tried to pass it in to the SP which of course threw a fit.
Once I changed the varchar(5) to varchar(50) it worked perfectly.
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
I'm new to SSIS, but have been programming in SQL and ASP.Net for several years. In Visual Studio 2005 Team Edition I've created an SSIS that imports data from a flat file into the database. The original process worked, but did not check the creation date of the import file. I've been asked to add logic that will check that date and verify that it's more recent than a value stored in the database before the import process executes.
Here are the task steps.
[Execute SQL Task] - Run a stored procedure that checks to see if the import is running. If so, stop execution. Otherwise, proceed to the next step.
[Execute SQL Task] - Log an entry to a table indicating that the import has started.
[Script Task] - Get the create date for the current flat file via the reference provided in the file connection manager. Assign that date to a global value (FileCreateDate) and pass it to the next step. This works.
[Execute SQL Task] - Compare this file date with the last file create date in the database. This is where the process breaks. This step depends on 2 variables defined at a global level. The first is FileCreateDate, which gets set in step 3. The second is a global variable named IsNewFile. That variable needs to be set in this step based on what the stored procedure this step calls finds out on the database. Precedence constraints direct behavior to the next proper node according to the TRUE/FALSE setting of IsNewFile.
If IsNewFile is FALSE, direct the process to a step that enters a log entry to a table and conclude execution of the SSIS.
If IsNewFile is TRUE, proceed with the import. There are 5 other subsequent steps that follow this decision, but since those work they are not relevant to this post.
Here is the stored procedure that Step 4 is calling. You can see that I experimented with using and not using the OUTPUT option. I really don't care if it returns the value as an OUTPUT or as a field in a recordset. All I care about is getting that value back from the stored procedure so this node in the decision tree can point the flow in the correct direction.
CREATE PROCEDURE [dbo].[p_CheckImportFileCreateDate]
/*
The SSIS package passes the FileCreateDate parameter to this procedure, which then compares that parameter with the date saved in tbl_ImportFileCreateDate.
If the date is newer (or if there is no date), it updates the field in that table and returns a TRUE IsNewFile bit value in a recordset.
Otherwise it returns a FALSE value in the IsNewFile column.
Example:
exec p_CheckImportFileCreateDate 'GL Account Import', '2/27/2008 9:24 AM', 0
*/
@ProcessName varchar(50)
, @FileCreateDate datetime
, @IsNewFile bit OUTPUT
AS
SET NOCOUNT ON
--DECLARE @IsNewFile bit
DECLARE @CreateDateInTable datetime
SELECT @CreateDateInTable = FileCreateDate FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName
IF EXISTS (SELECT ProcessName FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName)
BEGIN
-- The process exists in tbl_ImportFileCreateDate. Compare the create dates.
IF (@FileCreateDate > @CreateDateInTable)
BEGIN
-- This is a newer file date. Update the table and set @IsNewFile to TRUE.
UPDATE tbl_ImportFileCreateDate
SET FileCreateDate = @FileCreateDate
WHERE ProcessName = @ProcessName
SET @IsNewFile = 1
END
ELSE
BEGIN
-- The file date is the same or older.
SET @IsNewFile = 0
END
END
ELSE
BEGIN
-- This is a new process for tbl_ImportFileCreateDate. Add a record to that table and set @IsNewFile to TRUE.
INSERT INTO tbl_ImportFileCreateDate (ProcessName, FileCreateDate)
VALUES (@ProcessName, @FileCreateDate)
SET @IsNewFile = 1
END
SELECT @IsNewFile
The relevant Global Variables in the package are defined as follows:
Name : Scope : Date Type : Value
FileCreateDate : (Package Name) : DateType : 1/1/2000
IsNewFile : (Package Name) : Boolean : False
Setting the properties in the "Execute SQL Task Editor" has been the difficult part of this. Here are the settings.
General
Name = Compare Last File Create Date
Description = Compares the create date of the current file with a value in tbl_ImportFileCreateDate.
TimeOut = 0
CodePage = 1252
ResultSet = None
ConnectionType = OLE DB
Connection = MyServerDataBase
SQLSourceType = Direct input
IsQueryStoredProcedure = False
BypassPrepare = True
I tried several SQL statements, suspecting it's a syntax issue. All of these failed, but with different error messages. These are the 2 most recent attempts based on posts I was able to locate.
SQLStatement = exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
SQLStatement = exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
Parameter Mapping
Variable Name = User::FileCreateDate, Direction = Input, DataType = DATE, Parameter Name = 0, Parameter Size = -1
Variable Name = User::IsNewFile, Direction = Output, DataType = BYTE, Parameter Name = 1, Parameter Size = -1
Result Set is empty.
Expressions is empty.
When I run this in debug mode with this SQL statement ...
exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
... the following error message appears.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "No value given for one or more required parameters.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
When the above is run tbl_ImportFileCreateDate does not get updated, so it's failing at some point when calling the procedure.
When I run this in debug mode with this SQL statement ...
exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
... the tbl_ImportFileCreateDate table gets updated. So I know that data piece is working, but then it fails with the following message.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC001F009 at GLImport: The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
The IsNewFile global variable is scoped at the package level and has a Boolean data type, and the Output parameter in the stored procedure is defined as a Bit. So what gives?
The "Possible Failure Reasons" message is so generic that it's been useless to me. And I've been unable to find any examples online that explain how to do what I'm attempting. This would seem to be a very common task. My suspicion is that one or more of the settings in that Execute SQL Task node is bad. Or that there is some cryptic, undocumented reason that this is failing.
Thanks for your help.
I am trying to run an update stored procedure that will add 1 revision to the rev field and return the Value back to my Application. My number is incrementing by 2 and not 1.
Here is my Stored Procedure
CREATE PROCEDURE dbo.sp_Update_file
@kbid big,@filename nvarchar(50),@rev big OUTPUT,@moddate datetime,@owner nvarchar(50),@author nvarchar(50)AsUPDATE KBFile
SET rev = rev + 1,filename = @filename,moddate = @moddate,owner = @owner,author = @author,@rev = (Select rev from kbfile where kbid = @kbid)WHERE kbid = @kbIDGO
Ok, still a little bit novice on stored procedures, and can't see why this one doesn't return the value I need.In this case, lessonLocation.CREATE PROCEDURE dbo.getLocation @studentId VARCHAR(20), @lessonLocation VARCHAR(50) OUTPUTASBEGIN DECLARE @errCode INT
SELECT lessonLocation FROM cmiDataModel WHERE studentId = @studentId
SET @errCode = 0 RETURN @errCode RETURN @lessonLocation
HANDLE_APPERR: SET @errCode = 1 RETURN @errCodeHANDLE_DBERR:
SET @errCode = -1 RETURN @errCodeENDGOIn the query analyzer, it returns the value in the db, but always blank when run in the .Net app.Thanks all,Zath
Hi everyone!
I am new to sql server 2005 and visual studio 2005.
I have the following simple stored procedure that checks if a user exists:
-------------------------------------------------------------------------------------------------------
ALTER PROCEDURE [dbo].[sp_Users_AlreadyExists]
@UserName varchar(256)
AS
BEGIN
SET NOCOUNT ON;
IF (EXISTS (SELECT UserName FROM dbo.Users WHERE LOWER(@UserName) = LoweredUserName ))
RETURN(1)
ELSE
RETURN(0)
END
-------------------------------------------------------------------------------------------------------
I use the following code to execute the procedure on visual studio:
-------------------------------------------------------------------------------------------------------
.
.
.
cmdobj As SqlCommand
cmdobj = New SqlCommand(sp_Users_AlreadyExists, connobj)
cmdobj.CommandType = CommandType.StoredProcedure
cmdobj.Parameters.AddWithValue("@UserName", "blablalala")
cmdobj.ExecuteNonQuery()
cmdobj.Dispose()
connobj.Close()
.
.
.
-------------------------------------------------------------------------------------------------------
I expected that cmdobj.ExecuteNonQuery() would return 1 if the user
blablab exists or 0 if the user doesnt, but it just return -1 (i think
because no row was affected)
Does anyone knows how to retrieve the value that my stored procedure returns?
Thanx in advance!
Trying to get a count on records that match search and all I'm getting is 0. I'm using the same basic sp and code elsewhere and it works fine. Anyone see anything wrong here?
Stored Procedure:CREATE PROCEDURE GetResultsCount(@searchCatalog nVarchar(100))ASRETURN ( SELECT COUNT(*) FROM CatalogWHERE itemName LIKE @searchCatalog ORitemLongDesc LIKE @searchCatalog)GO
Code: Dim connStr As SqlConnection Dim cmdResultsCount As SqlCommand Dim paramReturnCount As SqlParameter Dim intResultsCount As Integer connStr = New SqlConnection(ConfigurationSettings.AppSettings("sqlCon.ConnectionString")) cmdResultsCount = New SqlCommand("GetResultsCount", connStr) cmdResultsCount.CommandType = CommandType.StoredProcedure cmdResultsCount.Parameters.Add("@searchCatalog", Request.QueryString("search")) paramReturnCount = cmdResultsCount.Parameters.Add("ReturnValue", SqlDbType.Int) paramReturnCount.Direction = ParameterDirection.ReturnValue connStr.Open() cmdResultsCount.ExecuteNonQuery() intResultsCount = cmdResultsCount.Parameters("ReturnValue").Value connStr.Close() Me.lblResultsCount.Text = intResultsCount
Im creating an app in VB.NET that calls a stored procedure which inserts data into one of my tables. I need it to return the id it creates (autonumber) to the VB.NET Program
I keep raising an exception in VB.NET...I want to make sure my stored procedure is correct first...sadly this is my first procedure ive created.
CREATE PROCEDURE db_addtocontractInsert
@contractid int,
@playerid int,
@numyears smallint,
@year1 float(8),
@year2 float(8),
@year3 float(8),
@year4 float(8),
@year5 float(8),
@yearsremain smallint
AS
INSERT INTO db_Contracts
VALUES (@playerid,@numyears,@year1,@year2,@year3,@year4,@year5,@yearsremain)
SELECT @contractid
Return @contractid
GO
-----------------------------------------------
Any tips or corrections that need to be made would be greatly appreciated.
Thanks
Tainter
If I pass in the value of 1, the stored procedure should return the value of (.5360268), else it should return 0 for any other value(null/blank/empty/etc)
The following stored procedure is returning the value 0 if I pass in the value of 1 which is wrong. And I would need to set to 0 for any other value. I am checking only for null or empty, but the if condition should check any value (except 1) and return 0 for it.
ALTER PROCEDURE [dbo].[Calculator]
(
@ExtraCardiacArteriopathy bit
)
AS
BEGIN
declare @zarterio decimal(14,10)
[Code] .....
Hi Guys, I have a series of count statements in a Stored Procedure that return some values. What I want to do is take all of the values that have been returned by the Count statements, add them up and return the value to my .Net Code, but for some reason whenever I try I carry on getting a returned value of 0.
I have checked that the statements are in fact returning values other than 0, and I was wondering if there is something that I am doing wrong in the code below:
<code>
CREATE PROCEDURE [dbo].[UCOutstanding]
@userid int
AS
DECLARE @Num as Int
DECLARE @Num2 as Int
DECLARE @Num3 as Int
DECLARE @Num4 as Int
SET @Num = (SELECT count(*) FROM images, albums, memorial WHERE (images.active=0 AND images.albumid=albums.id AND albums.memorialid=memorial.id AND memorial.userid=@userid))
SET @Num2 = (SELECT count(*) FROM downloads, memorial WHERE (downloads.active=0 AND downloads.memorialid=memorial.id AND memorial.userid=@userid))
SET @Num3 = (SELECT count(*) FROM images, comments, albums, memorial WHERE (comments.active=0 AND comments.imageid=images.id AND images.albumid=albums.id AND albums.memorialid=memorial.id AND memorial.userid=@userid))
SET @Num4 = (SELECT count(*) FROM memorial, story WHERE (story.memorialID=memorial.id and memorial.userid=@userid))
DECLARE @Total as Int
SET @Total = @Num + @Num2 + @Num3 + @Num4
Return @Total
GO
</code>
Thanks for the Help
GP
I have a Sproc shown below I want the procedure to return the New_ID value back to the calling program how can I do this.
The current approach is not working. Please help.
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
.................................
ALTER PROCEDURE [dbo].[SP]
(
@Id int=NULL ,
@site_id int = null,
@Date datetime = null,
)
AS
BEGIN
Declare @New_ID varchar(10)
EXEC [dbo].[SP_GENERATEID] @New_ID output
INSERT INTO A_Table(
CODE,INT_ID,SITE_INT_ID,DATE,
)
Values
(
@New_ID,@Id,@site_id,@Date )
return @New_ID
END
Thanks
Hi All.Maybe someone in here could help on this too....Uusally I can return a value from a stored procedure without any problem.Today I ran into something I cannot figure out.Basically....what I am doing is a couple of inserts or updates depending onwhat is being passed.So in the storedproc tag, I am passing the necessary values along with 1output param. I was using an INOUT param, but I figured I would play itsafe since it wasn't working.So...in the stored procedure, I do some conditions inside transactionstatements...I don't have the code with me right now as I am home, but I figure if I cangive you the general idea, you may know what the problem is.So I have something like this...BEGIN TRANIF team_ID is nullBEGINIF target_ID > 0BEGIN--- INSERT processingSET @OutPutVariable = Scope_Identity()ENDIF target_ID < 0BEGIN--- INSERT processingSET @OutPutVariable = Scope_Identity()ENDENDIF team_ID is not nullBEGIN-- UPDATE ProcessingENDCOMMIT TRANSELECT @OutPutVariableIf I run this procedure through enterprise, i get what I need....the valueof the last inserted record. When I do it through CF, I always get 0 ORnothing at all.If I do a SELECT 100, I get a return value of 100 of course, so it seemslike it's out of scope.Any ideas?
View 5 Replies View RelatedI have a stored procedure below that returns a table of coaches. It worked before now it does not. It returns nothing, in vistual studio 2005 and on my asp.net webpage. But when I execute it in query analyzer with just SELECT * FROM Coaches it returns the rows. There is no error just will not return what I need. I recreated the database and stored procedure still doing the same thing. Any ideas? Would this be on my server hosting side? ALTER PROCEDURE [dbo].[GetCo]ASSELECT * FROM Coaches
View 2 Replies View RelatedHi,I'm creating a stored procedure that pulls information from 4 tables based on 1 parameter. This should be very straightforward, but for some reason it doesn't work.Given below are the relevant tables: SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_Project](
[ProjID] [varchar](300) NOT NULL,
[ProjType] [varchar](20) NULL,
[ProjectTitle] [varchar](max) NULL,
[ProjectDetails] [varchar](max) NULL,
[ProjectManagerID] [int] NULL,
[RequestedBy] [varchar](max) NULL,
[DateRequested] [datetime] NULL,
[DueDate] [datetime] NULL,
[ProjectStatusID] [int] NULL,
CONSTRAINT [PK__tbl_Project__0B91BA14] PRIMARY KEY CLUSTERED
(
[ProjID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[tbl_Project] WITH CHECK ADD CONSTRAINT [FK_tbl_Project_tbl_ProjectManager] FOREIGN KEY([ProjectManagerID])
REFERENCES [dbo].[tbl_ProjectManager] ([ProjectManagerID])
GO
ALTER TABLE [dbo].[tbl_Project] CHECK CONSTRAINT [FK_tbl_Project_tbl_ProjectManager]
GO
ALTER TABLE [dbo].[tbl_Project] WITH CHECK ADD CONSTRAINT [FK_tbl_Project_tbl_ProjectStatus] FOREIGN KEY([ProjectStatusID])
REFERENCES [dbo].[tbl_ProjectStatus] ([ProjectStatusID])
GO
ALTER TABLE [dbo].[tbl_Project] CHECK CONSTRAINT [FK_tbl_Project_tbl_ProjectStatus]
-----------------------------------------------------------------
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_Report](
[ReportName] [varchar](50) NOT NULL,
[ProjID] [varchar](300) NULL,
[DeptCode] [varchar](50) NULL,
[ProjType] [varchar](50) NULL,
[ProjectTitle] [varchar](500) NULL,
[ProjectDetails] [varchar](3000) NULL,
[ProjectManagerID] [int] NULL,
[RequestedBy] [varchar](50) NULL,
[DateRequested] [datetime] NULL,
[DueDate] [datetime] NULL,
[ProjectStatusID] [int] NULL,
CONSTRAINT [PK_tbl_Report] PRIMARY KEY CLUSTERED
(
[ReportName] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[tbl_Report] WITH CHECK ADD CONSTRAINT [FK_tbl_Report_tbl_ProjectManager] FOREIGN KEY([ProjectManagerID])
REFERENCES [dbo].[tbl_ProjectManager] ([ProjectManagerID])
GO
ALTER TABLE [dbo].[tbl_Report] CHECK CONSTRAINT [FK_tbl_Report_tbl_ProjectManager]
GO
ALTER TABLE [dbo].[tbl_Report] WITH CHECK ADD CONSTRAINT [FK_tbl_Report_tbl_ProjectStatus] FOREIGN KEY([ProjectStatusID])
REFERENCES [dbo].[tbl_ProjectStatus] ([ProjectStatusID])
GO
ALTER TABLE [dbo].[tbl_Report] CHECK CONSTRAINT [FK_tbl_Report_tbl_ProjectStatus]
--------------------------------------------------------------
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_ProjectStatus](
[ProjectStatusID] [int] IDENTITY(1,1) NOT NULL,
[ProjectStatus] [varchar](max) NULL,
CONSTRAINT [PK__tbl_ProjectStatu__023D5A04] PRIMARY KEY CLUSTERED
(
[ProjectStatusID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
-----------------------------------------------------------
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[tbl_ProjectManager](
[ProjectManagerID] [int] IDENTITY(1,1) NOT NULL,
[FName] [varchar](50) NULL,
[LName] [varchar](50) NULL,
[Inactive] [int] NULL,
CONSTRAINT [PK__tbl_ProjectManag__7D78A4E7] PRIMARY KEY CLUSTERED
(
[ProjectManagerID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
And here is the stored procedure that I wrote (doesn't return results): SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[GetReportQuery]
(
@ReportName varchar(100)
)
AS
BEGIN
SET
NOCOUNT ON
IF @ReportName IS NULL
BEGIN
RETURN -1
END
ELSE
BEGIN
DECLARE @DeptCode varchar(50), @ProjID varchar(50)
SELECT @DeptCode = DeptCode FROM tbl_Report WHERE ReportName = @ReportName
SET @ProjID = @DeptCode + '-' + '%'
SELECT P.ProjID, P.ProjType, P.ProjectTitle, P.ProjectDetails, M.FName, M.LName, P.DateRequested, P.DueDate, S.ProjectStatus
FROM tbl_Project P, tbl_ProjectManager M, tbl_ProjectStatus S
WHERE ((P.ProjID = (SELECT ProjID FROM tbl_Report WHERE ((ReportName = @ReportName))))
AND (P.ProjectDetails = (SELECT ProjectDetails FROM tbl_Report WHERE ReportName = @ReportName) OR P.ProjectDetails IS NULL)
AND (M.FName = (SELECT FName FROM tbl_ProjectManager WHERE (ProjectManagerID = (SELECT ProjectManagerID FROM tbl_Report WHERE ReportName = @ReportName))) OR M.FName IS NULL)
AND (M.LName = (SELECT LName FROM tbl_ProjectManager WHERE (ProjectManagerID = (SELECT ProjectManagerID FROM tbl_Report WHERE ReportName = @ReportName))) OR M.LName IS NULL)
AND (P.DateRequested = (SELECT DateRequested FROM tbl_Report WHERE ReportName = @ReportName) OR P.DateRequested IS NULL)
AND (P.DueDate = (SELECT DueDate FROM tbl_Report WHERE ReportName = @ReportName) OR P.DueDate IS NULL)
AND (S.ProjectStatus = (SELECT ProjectStatusID FROM tbl_Report WHERE ReportName = @ReportName) OR S.ProjectStatus IS NULL)
)
END
END Can someone see what's wrong? Thanks.
Hi,
I created a temporary table inside a stored procedure called TmpCursor and the last time I include this..
Select * from #TmpSummary
GO
Inside my web page, I have the following code...
QrySummary = "Exec TmpCursor"
Set rsSummary = Server.CreateObject("ADODB.RecordSet")
rsSummary.Open QrySummary, cnCentral
cnCentral is my sqlconnection string..
This is the error I got when viewing the page
Error Type:
ADODB.Recordset (0x800A0E78)
Operation is not allowed when the object is closed.
BTW, the stored procedure works fine in Query Analyzer.
TIA
Hi,
How to return values from stored procedures?? I have a value whose variable would be set thru this sp and it should return this value. How to do this?
Thanks,
Anyone know how to return a sql command from a sql server stored procedure using asp.net c# and sql server 2000?I'm trying to debug the stored proc and thought the easiest way would be to return the insert command and debug it in the query analyzer.Thanks.Doug.
View 2 Replies View RelatedHELP HELP HELP!!
I have two questions.
I'm using VB 6.0 with ADO to SQL 7.0. My stored procedure works fine with Query Analyzer. I pass one parameter.
sp_test "1234"
And I get a recordset returned.
The stored procedure looks like this:
CREATE PROCEDURE sp_test
@facility_key varchar(255) = null
AS
/*DECLARE @sql1 varchar(255)*/
SELECT * FROM v_reimbursement_report
WHERE facility_key = @facility_key
/*IF @facility_key <> null
PRINT "0"
BEGIN
SELECT * FROM v_reimbursement_report
WHERE facility_key = @facility_key
END*/
When I uncomment the commented lines, I can still get a recordset returned using the query analyzer. And I get the same recordset returned when I use VB ADO and leave the stored proc lines commented out. However, when I call the procedure using the same VB code with the stored proc lines uncommented, I get -1 returned for rs.recordcount:
Private Sub Main_Click()
On Error GoTo Err_Main
Dim lsFacility As String
Dim lsReportName As String
Dim rs As ADODB.Recordset
Dim cmd As ADODB.Command
Dim gconn As ADODB.Connection
Dim param_facility_key As ADODB.Parameter
Dim gConnString As String
gConnString = "Trusted_Connection=Yes;UID=sa;PWD=yoyo;DATABASE=y ada;SERVER=ya;Network=dbnmpntw;Address=ya;DRIVER={ SQL Server};DSN=''"
Set gconn = New ADODB.Connection
Set rs = New ADODB.Recordset
Set cmd = New ADODB.Command
gconn.Open gConnString
cmd.Parameters.Refresh
lsFacility = "1234"
Set param_facility_key = cmd.CreateParameter("facility_key", adVarChar, adParamInput, 255)
cmd.Parameters.Append param_facility_key
param_facility_key.Value = lsFacility
cmd.CommandType = adCmdStoredProc
cmd.CommandText = "sp_reimbursement_report_test"
cmd.Name = "sp_reimbursement_report_test"
Set cmd.ActiveConnection = gconn
rs.Open cmd, , adOpenKeyset, adLockOptimistic
MsgBox rs.RecordCount
Exit_Main:
Screen.MousePointer = vbNormal
gconn.Close
rs.Close
Exit Sub
Err_Main:
Screen.MousePointer = vbNormal
MsgBox "Error " & Err.Number & " has occurred: " & Err.Description
End Sub
Here are my questions:
1. Why don't I get a recordset returned to VB if I have anything (the commented lines) except a simple SELECT statement in the stored proc.
2. Why must I do a Print "0" (or anything) command in the stored procedure within the IF statement to see a recordset return?
TIA for any help you can give....this one has been keeping me up....and my company down.
JWB
Dear all,
I have a big problem in using SQL Server stored procedures:
When I have two select statement in the same procedure, the first one will use for returning specific information for the second one to select appropiate result to the client, but the stored procedure just return the first select statement recordset! What can I do? (I use VB Data Environment to access the stored procedures)
This is a strange issue I'm encountering. I have a websphere application that calls a basic Stored Procedure in SQL Server 2000. The SP works fine. Now, if I create a TEMP table in the SP, I no longer get a resultset. No results are returned by the websphere. Even if I do not use the temp table... that is, I just create the temp table like so:
SELECT region_code,
OperGroup_Code,
country_name,
MajorGroup_Name,
RptgEntity_Name,
shell_code,
CRC,
' ' as right_type
INTO #tmpTShell FROM TShell WHERE 1=0
But I then grab my records using the query that works (querying another table), I still get NULL for records returned. Only when I comment out the above TEMP table creation do I get the results back in websphere. Another strange thing is that this works fin in SQL analyzer. WRegardless of whether I have the temp table creation commented out or not, it always works in the Query Analyzer whe I call the SP. It just seems to effect WebSphere or my java code in that it returns null if I create the temp table.
Has anyone ever experienced anthying like this? Any help would be greatly appreciated!
Thanks.
I can't even think how I would go about beginning to solve this problem, so any tips/pointers would help immensely.
I'm running a query that builds a time line of a process using messages in a table called Event. The Event table is joined with a table called Charge_Info based on N_Charge, the charge number. It builds the time line by looking in the Message field for various text strings that signify a specific point has been reached in the process and builds a record for each charge number with data from N_Charge and timestamps from the events table.
The problem I have is that there aren't records for every event in the Event table, ie, for every charge that doesn't have a "Heating Complete" event, the returned recordset has no mention of that charge. The system recording these events is pretty much crap, but there's nothing to be done about that right now. What I want to happen is for the query to return every record in N_Charge and a null string or NULL in place of the non-existing events.
The stored procedure is pasted below. I pass the dates I want and select from the Event table into a temporary table and then do the join/text search on that table. It helped performance tremendously compared to the text search searching all 400,000+ records in the Event table and then doing the date select.
Thanks for any help in advance,
TimC
SELECT EVENT.Time_Stamp, EVENT.N_CHARGE, EVENT.Message
INTO #EVENT_FILTERED
FROM EVENT
WHERE (EVENT.TIME_STAMP >= @StartDate) AND (EVENT.TIME_STAMP < @EndDate)
SELECT CHARGE_INFO.TIME_STAMP, CHARGE_INFO.N_CHARGE, CHARGE_INFO.BASE,
CHARGE_INFO.N_RECIPE, CHARGE_INFO.N_FCE, CHARGE_INFO.N_CH,
CHARGE_INFO.HEIGHT, CHARGE_INFO.CREW_EOC, CHARGE_INFO.CREW_SOC,
CHARGE_INFO.TIME_START, CHARGE_INFO.TIME_FCE_SET,
CHARGE_INFO.TIME_FCE_IGNITED, CHARGE_INFO.TIME_FCE_REMOVED,
CHARGE_INFO.TIME_CH_SET, CHARGE_INFO.TIME_CH_REMOVED,
CHARGE_INFO.WEIGHT, CHARGE_INFO.TIME_POST_PRG_COMPLETE,
EVENT.TIME_STAMP AS IC_Set,
EVENT_1.TIME_STAMP AS Cycle_Started,
EVENT_2.TIME_STAMP AS Leak_Test_Done,
EVENT_3.TIME_STAMP AS End_N2_PrePurge,
EVENT_4.TIME_STAMP AS Heating_Complete,
EVENT_5.TIME_STAMP AS Split_Temp_Met,
EVENT_6.TIME_STAMP AS End_N2_Final_Purge,
EVENT_7.TIME_STAMP AS Inner_Cover_Removed,
EVENT_8.TIME_STAMP AS Cycle_Complete,
EVENT_9.TIME_STAMP AS Post_Purge_Time_Met
FROM dbo.CHARGE_INFO CHARGE_INFO LEFT OUTER JOIN
#EVENT_FILTERED EVENT_9 ON CHARGE_INFO.N_CHARGE = EVENT_9.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_7 ON CHARGE_INFO.N_CHARGE = EVENT_7.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_6 ON CHARGE_INFO.N_CHARGE = EVENT_6.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_8 ON CHARGE_INFO.N_CHARGE = EVENT_8.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_5 ON CHARGE_INFO.N_CHARGE = EVENT_5.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_3 ON CHARGE_INFO.N_CHARGE = EVENT_3.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_1 ON CHARGE_INFO.N_CHARGE = EVENT_1.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_4 ON CHARGE_INFO.N_CHARGE = EVENT_4.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT_2 ON CHARGE_INFO.N_CHARGE = EVENT_2.N_CHARGE LEFT OUTER JOIN
#EVENT_FILTERED EVENT ON CHARGE_INFO.N_CHARGE = EVENT.N_CHARGE
WHERE (EVENT.MESSAGE LIKE '%Inner Cover Set%') AND
(EVENT_1.MESSAGE LIKE '%Cycle Started%') AND
(EVENT_2.MESSAGE LIKE '%Leak Test Done%') AND
(EVENT_3.MESSAGE LIKE '%End of N2 PrePurge%') AND
(EVENT_4.MESSAGE LIKE '%Heating Complete%') AND
(EVENT_5.MESSAGE LIKE '%Split Temp Met%') AND
(EVENT_6.MESSAGE LIKE '%End N2 Final%') AND
(EVENT_7.MESSAGE LIKE '%Inner Cover Removed%') AND
(EVENT_8.MESSAGE LIKE '%Cycle Complete%') AND
(EVENT_9.MESSAGE LIKE '%Post Purge Time Met%') AND
(CHARGE_INFO.TIME_STAMP >= @StartDate) AND
(CHARGE_INFO.TIME_STAMP < @EndDate)
ORDER BY CHARGE_INFO.BASE, CHARGE_INFO.TIME_STAMP DESC
How to return an entire table from stored procedure ????
thanx in advance
The stored procedure I created returns all records from the table if no parameters are passed, as expected. When I pass in the only parameter, I get 0 records returned when there should be one or more returned. I'm sure it's something simple in my syntax, but I don't see it.
This call returns all records:
exec webservices_BENEFICIAL_USES_DM_SELECT
This call returns 0 records, when it should return 1:
exec webservices_BENEFICIAL_USES_DM_SELECT @DISPOSAL_AREA_NAME='Cell 8'
Here is the stored procedure:
ALTER PROCEDURE [dbo].[webservices_BENEFICIAL_USES_DM_SELECT]
-- Add the parameters for the stored procedure here
@DISPOSAL_AREA_NAME DISPOSAL_AREA_NAME_TYPE = NULL
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
IF @DISPOSAL_AREA_NAME IS NULL
BEGIN
SELECT*
FROMBENEFICIAL_USES_DM
END
ELSE
BEGIN
SELECT*
FROMBENEFICIAL_USES_DM
WHEREDISPOSAL_AREA_NAME = '@DISPOSAL_AREA_NAME'
END
END
ALTER PROCEDURE [dbo].[getFavoriteList]
as
begin
SET NOCOUNT ON
select manufacturer_name from dbo.Favorite_list
end
execute getFavoriteList
It reruns infinite data and finally i got message as
Msg 217, Level 16, State 1, Procedure getFavoriteList, Line 15
Maximum stored procedure, function, trigger, or view nesting level exceeded (limit 32).
I am trying to return the dataset from stored procedure.
Hi All. My question is this. I have a complex stored procedure in SQLServer which works fine when I run it in Query Analyzer. However, whenI call it within my ASP script, it returns nothing, and sometimes locksup. If I change my script to call other existing stored procedures itworks fine. It's just with this particular stored proc. I have triedvarious DB calls in ASP, such as opening the recordset through an ADOconnection and through the Command object but to no avail. Here is mySQL:SET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS OFFGOALTER PROCEDURE dbo.sp_getProfessionalsByTypeID@typeID intASdeclare @catID intdeclare @userID intdeclare @strUserName varchar(100)declare @strFirstName varchar(100)declare @strLastName varchar(100)declare @strTypeName varchar(100)declare @strCategoryName varchar(100)declare @strPictureURL varchar(100)declare @sql varchar(1000)declare @a varchar(100)declare @b varchar(100)declare @c varchar(100)declare @d varchar(100)beginset @a=''set @b=''set @c=''set @d=''--Create Temp TableCREATE TABLE #QueryResult (nCatID int, nTypeID int, nUserID int,strUserName varchar(100), strFirstName varchar(100), strLastNamevarchar(100), strTypeName varchar(100), strCategoryNamevarchar(100),strPictureURL varchar(100))--Search QuerybeginINSERT #QueryResultSELECTdbo.tbl_musician_type.nCatID, dbo.tbl_musician_type.nTypeID,dbo.tbl_users.nUserID, dbo.tbl_users.strUserName,dbo.tbl_users.strLastName,dbo.tbl_users.strFirstName,dbo.tbl_musician_type.strTypeName, dbo.tbl_category.strCategoryName,dbo.tbl_professionals.strPictureURLFROMdbo.tbl_musician_type INNER JOINdbo.tbl_category ON dbo.tbl_musician_type.nCatID= dbo.tbl_category.nCategoryID INNER JOINdbo.tbl_profile ONdbo.tbl_musician_type.nTypeID = dbo.tbl_profile.nTypeID INNER JOINdbo.tbl_users ON dbo.tbl_profile.nUserID =dbo.tbl_users.nUserID LEFT OUTER JOINdbo.tbl_professionals ON dbo.tbl_users.nUserID= dbo.tbl_professionals.nUserIDWHEREdbo.tbl_musician_type.nTypeID = @typeIDend--Create Temp TableCREATE TABLE #QueryResult2 (ID int IDENTITY,nCatID int, nTypeID int,nUserID int, strUserName varchar(100), strFirstName varchar(100),strLastName varchar(100), strTypeName varchar(100), strCategoryNamevarchar(100),strPictureURL varchar(100), strArtist varchar(100),strAlbumTitle varchar(100), strRecordLabel varchar(100), strYearvarchar(100))--Now Declare the Cursor for Speakersdeclare cur_musicians CURSOR FOR--Combined Results Groupedselect distinct nCatID, nTypeID, nUserID, strUserName, strLastName,strFirstName, strTypeName, strCategoryName, strPictureURLFrom #QueryResultopen cur_musiciansfetch next from cur_musicians INTO @catID, @typeID, @userID,@strUserName, @strLastName, @strFirstName, @strTypeName,@strCategoryName, @strPictureURL--Loop Through Cursorwhile @@FETCH_STATUS = 0beginSELECT TOP 1 @a = strArtist, @b=strAlbumTitle,@c=strRecordLabel, @d=strYearFROM dbo.tbl_profile_discogwhere nTypeID = @typeID AND nCategoryID = @catID AND nUserID =@userIDinsert #QueryResult2select @catID as nCatID, @typeID as nTypeID, @userID as nUserID,@strUserName as strUserName, @strLastName as strLastName, @strFirstNamestrFirstName, @strTypeName as strTypeName, @strCategoryName asstrCategoryName, @strPictureURL as strPictureURL, @a ashighlightArtist, @b as highlightAlbumTitle, @c as highlightRecordLabel,@d as highlightYearfetch next from cur_musicians INTO @catID, @typeID, @userID,@strUserName, @strLastName, @strFirstName, @strTypeName,@strCategoryName, @strPictureURLset @a = ''set @b=''set @c=''set @d=''endselect * from #QueryResult2 TI--Clean Upclose cur_musiciansdeallocate cur_musiciansdrop table #QueryResultdrop table #QueryResult2endGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO
View 5 Replies View Related