Error Sql Server Configuration Manager
Sep 5, 2007when i open services in the computer management console i get the error message
sql server configuration manager .... error... snap in...restart mmc
ADVERTISEMENT
Error Launching SQL Server Configuration Manager
Dec 5, 2007SQL Server 2005 (9.00.3042.00)
The servers are actually a cluster in an active / passive configuration. There are 2 servers with internal IP addresses and then a virtual server. We'll call them 192.1, 192.2 and VirtualBox. If I remote desktop into VirtualBox and run the config manager, nothing will happen for about 45 seconds and then I get a dialog with this message "Connection to target machine could not be made in a timely fasion.". Other than 'fashion' is misspelled :), I'm unable to determine what could cause this. Are there issues running this on a clustered environment? Or are there some things I can look at to diagnose this issue?
SQL Configuration Manager And SQL Server Surface Area Configuration Tools
May 2, 2007I have just finished installing SQL 2005 Ent Edition on Win 2000 Adv Server, SQL2005 SP2, and SP2 Hotfix KB934458. After the installation, I could see and configure all services via SQL Configuration Manager and SQL Server Surface Area Configuration tools. This worked for a couple of days and now both configuration tools no longer detect SQL2005 components. SQL Server Surface Area Configuration issued an error that said "No SQL Server 2005 components were found on specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLAC)". SQL Configuration Manager did not list any installed services. I don€™t know what caused this. Anyone has any idea? Please help! Below is the Installation Report which shows installed components.
===================================
The following components are installed on this server
DEV
Analysis Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Database Engine
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Reporting Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
QA
Analysis Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Database Engine
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Common components
Integration Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Notification Services
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
Workstation Components
[Version: 9.2.3042.00 Edition: Enterprise Edition Patch level: 9.2.3054 Language: English (United States)]
===================================
Error In Reporting Services Configuration Manager
May 24, 2006Hello
I've got an error when I want to initialize the Report Server by means of RS Configuration Manager.
All points are check in green except "Encryption Keys" that is in "Optionnal configuration" and "Initialization" that is in "Not Configured".
When I click on "Initialization" an error occured :
The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. (rsReportServerDatabaseUnavailable)
When I want to browse the report this error occured:
The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. (rsReportServerDatabaseUnavailable) (rsRPCError). Cannot generate SSPI context.
Someone can help me ?
Thanks
Arnaud
Invalid Object Name Error In Database Setup Step Of Configuration Manager
Dec 1, 2005Hi--
View 11 Replies View RelatedSQL Server Configuration Manager
Apr 27, 2006I have an application ready to transfer to the web hosting server with MS SQL 2005.
Database and tables were created with the VWD on the local machine (SQLEXPRESS).
I am using MS SQL Server Managenemt Studio Express to create the SQL to add the local tabales and data to the hosting database.
My connect to the hosting server is great.
Problem: My connection to SQLEPRESS is good but it only allows me to map Database from this directory C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData. I need to map to another directory as follows C:Documents and SettingsdflournoyMy DocumentsVisual Studio 2005WebSitescolumbushapps/app_data. So I can get to the tables I created locally.
Also has someone put together a process to migrate from SQLEXPRESS (Local) to Remote or Production SQL 2005 or 2000.
SQL Server Configuration Manager
Jun 6, 2008For some reason, when opening up the SQL Server Configuration Manager for one of my SQL Servers, the 'Requesting data from WMI provider..' message stays there. It never gets the data. This is in regards to services management. Its not a big deal, because I can log on to the server to accomplish this, but it would be nice to do it from SSMS. It works for other SQL Servers. Has anyone experienced this before?
View 4 Replies View RelatedQl Server Configuration Manager
May 25, 2007Guys,
can you guys pls let me know how do you access sql server configuration manager from command line?
Thanks
SQL Server Configuration Manager
May 2, 2007I just installed 3 instances of SQL Server 2005, installing the two named instances first and then the defaul instance third.
My configuration Manager only shows the two named instance services and the default does not show up.
Under Services in Computer Manager, it does show.
Any one run across this, and I would think it might cause some problems now that all the service configuration changes need to be performed in SQL Server Configuration Manager.
Thanks
Nothing In SQL Server Configuration Manager?
May 23, 2006Trying to setup local server agent.
SQL Server Configuration Manager---->SQL Server 2005 Services-->Nothing showed up??? No single items there.
So strange, Anyone could tell me what is wrong with this.
2005 Developer Ed
Windows Xp professional 32 I guess.
Configuration Manager - Which Configuration Type To Chose ?
Jan 14, 2006It seems to me, that the best way is to have one Environment Varible containing the name of the SQL Server, so that you can look up the configuration in the SSIS Configuration Table when you run the package.
Is this the preferable way of doing it ? I would like to hear some positive/negative comment of why chosing a configuration type instead of another.
It seems to me that putting all of the configuration in the Environment variable is harder work but most secure (server breakdown vs table corruption/database error...)
Let's have some comments
Sql Server Configuration Manager Installation Not Found
May 22, 2008I cannot find sql server configuration manager installed in cluster. but the installation is complete. what should i do
View 4 Replies View RelatedSQL Server Configuration Manager: SSL And Multiple Instances Problem
Mar 31, 2008Hi
We are trying to setup a number of SQL Server 2005 database instances on a single server. The server has multiple IP addresses bound to its network interface (card). Each instance is configured to listen on a specific (unique) port on 127.0.0.1 and port 1433 on a specific (unique) IP address configured on the network interface. Finally, there is another instance of SQL Server (which also has the Reporting Services, Analysis Services and Integration Services installed) that does not allow remote connections and has TCP/IP disabled.
SSL is configured for all instances, apart from the non-remote connections instance, as follows: The same self-signed certificate is specified for every instance. This certificate has been configured for all 127.0.0.1 ports and port 1433 on all IPs in use for any of the instances using httpcfg as documented. The Force Encryption option is enabled and the Hide Instance option is disabled.
All appears to work correctly, and the "The certificate was successfully loaded for encryption" message appears when sp_readerrorlog is run, for the instances it is supposed to. However, at some point a problem occurs. The Force Encryption and Hide Instance labels _disappear_ (leaving blank spaces in the grid) from the interface, with the drop-down settings still visible. This seems to happen after installing an additional instance, although on one occasion it was after the 3rd was installed and on another occasion the 4th. Uninstalling the instances (even all of them) does not seem to help - only removing SQL Server 2005 completely and re-installing allowed the labels to re-appear.
Another concern is that after problem occurs, it appears that the settings are not being interpreted correctly. Even if the certificate is disabled for an instance, the message "The certificate was successfully loaded for encryption" appears, instead of the instance using a self-signed certificate. Additionally, on some occasions, the values for the Force Encryption and Hide Instance are swapped (or at least the values in the positions that used to be inline with the labels for these options).
As an additional note, various IIS Web Sites are configured on each of the IPs on the network interface. These are also using the same self-signed certification for SSL and are all using port 443, which none of the SQL server instances are configured to use.
Any feedback or suggestions on this would be appreciated. Thanks.
Configure Report Server From Reporting Service Configuration Manager
Jan 25, 2008When I opened "Reporting Service Configuration Manger" from SQL server configuration tool list, The "Report Server Installation Instance window came out. It showed my local machine name on the field of Machine Name. When I click "Find" button, a message box came out. It says: "No report server were found on the specified machine. Details: Invalid namespace
What is the problem and how to solve it.
Just Installed SQL 2005, No Servers Showing Up In SQL Server Configuration Manager. Plz Help!
Sep 2, 2006I have just installed SQL 2005 enterprise and every apeared to install ok. But using SQL config manager nothing is showing up under SQL 2005 Services tab.
Anyone got any ideas?
Cannot See SQL Server 2005 Services In SQL Server Configuration Manager
May 10, 2006
I cannot see any services within "SQL Server 2005 Services" in SQL Server Configuration Manager.
I am new to SQL Server 2005 and recently installed all of the SQL Server 2005 64-bit components on to a Windows 2003 64-bit server. I can create and view databases via SQL Server Management Studio. I can also start and stop the SQL Server service for the default instance via SQL Server Management Studio. But I should be able to start/stop the service via SQL Server Configuration Manager and I believe I'm supposed to use SQL Server Configuration Manager to make changes to the services.
I'm concerned that something may have become corrupted and is effected the SQL Server Configuration Manager. Any suggestions?
Thanks in advance,
Joann
Server Configuration Manager 64-bit Server Instance Not Showing
May 1, 2015After installing SQL Server Express Advanced 2012 64-bit edition, we are unable to see the 64-bit Server Network Configuration in the left pane. Â We need to edit the TCP/IP and Named Pipes to enable them. Â All that is showing is the 32-bit instance for our Acronis backups.how to view or add a SQL server instance to the Server Network Configuration msc?
View 3 Replies View RelatedServer Configuration Manager Has No Options For Creating A Server
Aug 5, 2015I am trying to install SQL Server 2014 on W10. SQL Server installed, but failed to create a server that be connected to. SQL Server Configuration Manager has no options for creating a server either. How do I create the server.
View 4 Replies View RelatedReporting Services :: JIT Debugging Error When Reporting Configuration Manager Is Opened
Sep 11, 2015We have installed SQL Server 2005 with reporting services.When tried to open getting errors as below: how to avoid such errors See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
ReportServicesConfigUI.WMIProvider.WMIProviderException: A WMI error has occurred and no additional error information is available. ---> System.Runtime.InteropServices.COMException (0x8000000A)
 at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
Â
[code]...
SQL Server Configuration Manager: Connection To Target Machine Could Not Be Made In A Timely Fashion
Dec 5, 2007I have a SQL Server 2005 box that was moved from a domain environment to a non-domain environment and was never dropped from its original domain before moving over. Subsequently a new domain was created at the data center this SQL Server box now resides in. The machine was dropped from its old domain and joined to the new one.
All the while the service accounts were set to the local admin account. When I tried to start the Configuration Manager I got the message "Connection to target machine could not be made in a timely fashion.". I read some blog entries and tried changing all the service accounts to Local System and the error message still came up.
All of the SQL Server services run fine. It is just this management console that I cannot open. I wasn't with this employer when this box was moved to the data center so I do not know if it worked prior and there isn't anyone here that could give me its history.
Any help would be appreciated.
SQL Server Configuration Manager, SQL Server 2005
Dec 18, 2007I have Microsoft Office Professional installed. It came with SQL SErver 2005 but I am not sure how to configure it. It is running( the SQL Server under Windows Services) but I can't find the MMC console to administer it. I tried linking from Access to create a SQL Server datasource but the SErver does not show up in the dialog box. Under Program Menu/SQL Server there is a Configuration Tools folder with the SQL Server Configuration manager. Is this the same as the MMC? My SQL Server is on my local computer with the Access Database I want to upsize. There are 3 or so folders under SQL Server Configuration Manager . SQL Server 2005 Network Configuration and SQL NAtive Client Configuration. I don't know what I'm supposed to do at this point but what I would like to do is add my user name and password as the administrator and find the MMC console. I would like to create a datasource in Access to the SQL Server. I am not sure whether I need the client or not since the SErver is on the same computer as the database. This is only a test run.
I would appreciate getting unstuck. Do I also need to install the MMC separate from the SQL Server. Since it installed when I installed Office Professional I didn't go through the steps of installing it and somethings seem like they are missing.
tia,
Configuration Manager ?
Apr 12, 2006Each time you start a SSIS project you have Solutions Configuration showing "Development". In the drop down box you can select "Configuration Manager..."
Can someone tell me the use of this, and is it related to the package configurations somehow. I've tried to create new Solution Configurations like "Test" and "Production" with the purpose of binding different configuration files and deplymentfolders to each Solution Configuration but still it seems like this isn't the way i should be used...
Report Manager Configuration
May 2, 2007We deployed Reporting Services recently to a customer with a latest release and build. When they type in http://<server>/ReportServer, this just comes up with a screen like a navigation sreen showing folders and links to reports. What needs to be done to get the Report Manager screen showing?
It has been a while since I actually installed Reporting Services. When they go into configuration, all of the green checks are there (except for Web Service Identity, which is Red).
Thanks for any information.
Sql Exp Configuration Manager MMC Problem
May 7, 2007Hi,
I've had weeks trying to establish connections between my PC and Small Business Server 2003 running SqlExpress. Finally sorted out the problem, and wanted to go into Sql Exp Configuration Manager.
This I've been using for weeks, yet today I get a message that " MMC could not create the snap-in".
I thought that MMC update 3.0 may be the problem., however, cannot find any indication that my server has been updated to MMC 3.0.
If that does happen to be the cause, how do I get around it.?
Thanks for any advice
Unable To Open Configuration Manager
Dec 27, 2013I am getting this error when i clicked on configuration manager. "Cannot connect to WMI provider. You do not have permissions or the server is unreachable. Note that you can only manage SQL server 2005 and later servers with configuration manager only."
View 10 Replies View RelatedSQL 2012 :: Configuration Manager TCP / IP Settings?
Apr 7, 2015We changed the IP addresses for several SQL Servers and we're a little confused by what we see in Configuration Manager. The TCP/IP properties "IP Addresses" tab still shows the old IP address, even after a restart. On "Protocol" tab, Listen All is set to "Yes".
We've found one source that says this setting causes the listening on an individual IP to be ignored.
Oracle Connection Manager Configuration Help
Apr 14, 2006Hi, I dont know if I should post this question here, or on oracle forums, but here goes ...
I made a simple package that performs 2 Excecute SQL Tasks, one task does a select query on a SQL Server DB Table, the other task does a select query on an Oracle DB Table.
The package runs fine in BIDS when debugging, but when I deployed the package to a file system and added it to an sql server agent Job, it all went wrong ...
I tried the ms oledb dataprovider (ole db) for oracle but also the oracleclient data provider (ado.net) but the package always fails.
The error messages in the logfile are these:
event
OnError
computer
ComputerName
operator
NT AUTHORITYSYSTEM
source
Execute SQL Task PLSQL
sourceid
{B29C4FC9-3345-4657-8680-F770B8C2E136}
executionid
{7312A7EC-2555-4268-BB29-38659507BADD}
starttime
14/04/2006 16:40
endtime
14/04/2006 16:40
datacode
-1073573396
databytes
0x
message
Failed to acquire connection "aaa.bbb.oracleClient". Connection may not be configured correctly or you may not have the right permissions on this connection.
the OnError logrow for the package itself says almost the same.
Now my question is: What do I need to configure to get it all working? I think I need to configure the oracle db no? What should I configure? ...
How To Do XML Configuration With Different Connection Manager In SSIS
Sep 15, 2006Hi
I want know how to config SSIS Package With different connection Manager.
Sample .
When Design time i gave The Connection Manager(Devlopement Server) Name : STG1.XXXSchema
Server Name STG.ssss
Password : xxxxx
I make the The XML configuration file .
after deploy the Package i want from Development Server to Production Server . so i will change the Package Config File Open wiht Notepad .
Server Name STG.qqq
Password :xxxxxx
after Edit Connection String I run the Package . It Always Taking Whatever igave the Connection String When Design time only .is not taking what connection string edit hte in the Package Config File. Please Any one give the Solution .
How we can Change the connection string in XML Config File .Whne I tested . It always taking what ever we given in the Desing Time .
Thanks & Regards,
Jeyakumar .M
Certificate Not Displaying In Configuration Manager
May 21, 2007Hi Guys,
I have installed a certifcate following
http://msdn2.microsoft.com/en-us/library/ms191192.aspx
But when i try to enable the certificate using Configuration manager i cant see the certificate. I can see the
certificate using MMC console. I followed the instructions and all the "Certifcate Requirements" from BOL is looking fine, but still cannot able to see the certificate in the configuration manager.
Any help/direction much appreciated.
kind Regards
A
Indirect Configuration Of Connection Manager
May 25, 2007Greetings All;
I am having trouble getting an indirect configuration to work. Can someone offer a hand?
Here's the deal....
I have a package the currently has an OLE DB Connection manager. I have an XML configuration file set up to acquire the connection string. That works fine. I have a package variable that contains the absolute path to the .dtsconfig file.
How can I get the connection manager to read the package variable (which has the path to the *.dtsconfig file) instead of the hard coded value?
Thanks in advance.
Confused About Configuration Manager's TCP/IP Settings
Jun 26, 2006I need another opinion about the SQL Server Configuration Manager's TCP/IP settings...
Recreation steps:
Start, (All) Programs, SQL Server 2005, Configuration Tools, SQL Server Configuration Manager.
Expand the "SQL Server 2005 Network Configuration"
Select the "Protocols for x" where "x" is the named-instance or "MSSQLServer" for default.
On the right-hand pane, right-click "TCP/IP" and select "Properties."
Select the "IP Addresses" tab.
Visually on the screen I have this:
_______________________________________
- IP1
Active Yes
Enabled No
IP Address 106.xx.xxx.xx
TCP Dynamic Ports
TCP Port 1433
- IP2
Active Yes
Enabled No
IP Address 127.0.0.1 <-loopback
TCP Dynamic Ports
TCP Port 1433
-IPAll
TCP Dynamic Ports
TCP Port 1433
_______________________________________
Questions:
1. If I want to change the listening port, I change all three at the same time?
1a. Does a value in the IPAll section override the individual IPx sections?
2. What does "enabled" mean? How can IP1 and IP2 not be enabled?
3. What does "active" mean? How can something be both active yet not enabled?
(4. Any plans to change the "NULL=False, 0=True" values for the Dynamic Ports?)
Starting Configuration Manager In A Cluster
Nov 19, 2007I have a 2 node cluster in an active/active configuration. Install is SQL 2005 Enterprise Edition x64, patched to KB934458
If I try and run SQL Server Configuration Manager on node 1 the application does not start and I get the following message: "Connection to target machine could not be made in a timely fashion." This happens for both SQL Server instances (SQL01 and SQL02).
I can connect fine on the 2nd node with both instances.
Further to this, if I try and run the Surface Area Configuration tool on node 1 - I can't connect to either SQL Instance (SQL01 and SQL02)
If I run the SAC tool on the second node, I can connect to the instance SQL02 that is active on node 2. If I fail that SQL Instance over to node 1, I can no longer connect
I think there is clearly something not quite right about node 1.
Any help/pointers would be appreciated.
SQL 2012 :: 64 Bit Options Not Showing Up In Configuration Manager
Jun 20, 2014I installed SQL Server 2012 on a windows server 2012 that had an existing 2008 R2 SQL installation.
After the install I can see only the 32 bit network configuration options in SQL Server Configuration Manager for both versions. Before the install they were available in the 2008 R2 version of the tool.