Error:the String Was Not Recognized As A Valid DateTime.
Aug 31, 2007
hi all, i'm trying to insert the time/date a button was clicked on a gridview and it generates an error:the string was not recognized as a valid DateTime.There is an unknown word starting at index 0 i have changed the culture to en-US but it still doesn't work. i actually created the date/time column after some data had been entered into the table so the column allows nulls. this is my code:
InsertCommand="INSERT INTO test101(Surname,Names,Registration,Login Time)VALUES (@Surname, @Names, @Registration,@Login_Time)"
<Insert Parameters><asp:Parameter DefaultValue= DateTime.Now Type=DateTime Name="Login_Time" /></Insert Parameters>
any suggestions?
View 9 Replies
ADVERTISEMENT
Dec 6, 2006
I'm getting error:
String was not recognized as a valid DateTime.
my insert parameter:
<asp:Parameter Name="LastModified" Type="DateTime" DefaultValue= "<%=DateTime.Now.ToString() %>"
my insert command:
InsertCommand="INSERT INTO [Product] ([Enabled], [ProductCode], [ProductName], [ProductAlias], [CarrierId], [DfltPlanId], [DoubleRating], [DoubleRateProductId], [ConnCharges], [StartDate], [EndDate], [Contracted], [BaseProductId], [LastModified], [LastUser]) VALUES (@Enabled, @ProductCode, @ProductName, @ProductAlias, @CarrierId, @DfltPlanId, @DoubleRating, @DoubleRateProductId, @ConnCharges, @StartDate, @EndDate, @Contracted, @BaseProductId, @LastModified, @LastUser)"
LastModified is a datetime field.
Running sql2005
View 1 Replies
View Related
Apr 8, 2008
Hi,I am getting this error: String was not recognized as a valid DateTime.I'm trying to insert data into a table from a gridview, where two of the dates can be empty strings.I have set 'allow null' in the SQL Server table for the two dates, added the culture in the web.config file, and even tried converting the values to DBNull.None of which have worked, and I am still getting the error.This is the code I am using: if (e.CommandName == "EmptyInsert")
{
if (Page.IsValid == true)
{
TextBox txtVisitDateIns = GridView2.Controls[0].Controls[0].FindControl("txtVisitDateIns") as TextBox;
TextBox txtNextVisitDateIns = GridView2.Controls[0].Controls[0].FindControl("txtNextVisitDateIns") as TextBox;
TextBox txtVisitedByIns = GridView2.Controls[0].Controls[0].FindControl("txtVisitedByIns") as TextBox;
DropDownList ddlPriorityIns = GridView2.Controls[0].Controls[0].FindControl("ddlPriorityIns") as DropDownList;
TextBox txtMailshotDateIns = GridView2.Controls[0].Controls[0].FindControl("txtMailshotDateIns") as TextBox;
if (txtNextVisitDateIns.Text == "")
txtNextVisitDateIns.Text = DBNull.Value.ToString();
if (txtMailshotDateIns.Text == "")
txtMailshotDateIns.Text = DBNull.Value.ToString();
SPVisitsBLL visits = new SPVisitsBLL();
visits.AddVisit(Convert.ToInt32(GridView1.SelectedValue.ToString()), Convert.ToDateTime(txtVisitDateIns.Text.ToString()),
Convert.ToDateTime(txtNextVisitDateIns.Text.ToString()), txtVisitedByIns.Text.ToString(),
Convert.ToInt32(ddlPriorityIns.SelectedValue.ToString()), Convert.ToDateTime(txtMailshotDateIns.Text.ToString()));
GridView2.DataBind();
}
} I haven't checked txtVisitDateIns to see if it is an empty string as this date is required.Can anyone help?Thanks
View 5 Replies
View Related
Sep 16, 2005
I am passing a string to my stored procedure call where I convert it to a DateTime. I have pasted the relevant code below. My trouble is that prior to execution of the stored procedure an error is thrown "String was not recognized as a valid DateTime".
The error does not get thrown when I pass it a date, it only throws it when no date is provided.
The page I am using is a form to do a search. The search can allow a date to be entered or left out. How do I catch an empty value in the c# for an invalid datetime and still send the variable to the stored procedure.
//////////////////////////// C# Code /////////////////////////////////// Passing the Date to a stored Procedure SqlParameter bdpDateFrom = new SqlParameter("@datefrom", SqlDbType.DateTime);bdpDateFrom.Value = Convert.ToDateTime(thisbdpDateFrom);myCommand.Parameters.Add(bdpDateFrom);
///////////////////////// Stored Procedure Code //////////////////////////////////@datefrom datetimeIF ((@datefrom IS NOT NULL) AND (@datefrom <>' '))BEGIN SET @whereclause = @whereclause + ' AND T1.c330101invoicedate_dt >= ''' + convert(varchar,@datefrom) + ''''END Thank you!
View 3 Replies
View Related
May 2, 2008
Hi,
I got this error report "The string was not recognized as a valid DateTime. There is a unknown word starting at index 0." at this line of code in BOLD.
For some reasons the datetime format in the database has the (US datetime format - 05/02/2008 06:40 instead of United Kingdom (UK date time format - 02/05/2008 06:40), as I had planned. I have tried to reformat the database and VB date format and all to no success.Could this be the root of my problems?
Code Snippet
Public Class Form1
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
If con.State = ConnectionState.Open Then con.Close()
con.Open()
cmd = New SqlCommand("SELECT REM_NOTE, REM_DATE FROM dbo.MY_CONTACTS", con)
Dim sdr As SqlDataReader = cmd.ExecuteReader
While sdr.HasRows = True
Dim newAlert As New Alert(Reminder_data_reader("REM_NOTE").ToString(), DateTime.Parse(Reminder_data_reader("REM_DATE").ToString()))
Me.collectionOfAlerts.Add(newAlert)
End If
End While
sdr.Close()
con.Close()
End Sub
End Class
View 3 Replies
View Related
Sep 26, 2004
i cannot seem to get rid of this error. My page works in other functions that have the same syntax and format. just this one doesnt. i tried changing the format but still the same thing.
SQL DB is DateTime. Any Suggestions?
Function UpdateException(ByVal qID As String, ByVal exception_Status As String, ByVal completed As String, byval notes as string, byVal Username as string) As Integer
dim strDate as date = datetime.now()
dim strdate1 as string = strDate.tostring("MM-dd-yy")
Dim connectionString As String = "server='servername'; trusted_connection=true; Database='CPD_Reports'"
Dim sqlConnection As System.Data.SqlClient.SqlConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Dim queryString As String = "UPDATE [Master_CPD_Reports] SET [Exception_Status]=@Exception_Status, [Completed]"& _
"= @Completed, [Completion_Date]= @Completion_Date, [Username]= @Username WHERE ([Master_CPD_Reports].[QID] = @QID)"
Dim sqlCommand As System.Data.SqlClient.SqlCommand = New System.Data.SqlClient.SqlCommand(queryString, sqlConnection)
sqlCommand.Parameters.Add("@QID", System.Data.SqlDbType.VarChar).Value = qID
sqlCommand.Parameters.Add("@Exception_Status", System.Data.SqlDbType.VarChar).Value = exception_Status
sqlCommand.Parameters.Add("@Completed", System.Data.SqlDbType.VarChar).Value = completed
sqlCommand.Parameters.Add("@Completion_Date", System.Data.SqlDbType.varchar).Value = strDate1
sqlCommand.Parameters.Add("@Username", System.Data.SqlDbType.DateTime).Value = UserName
dim NotesUpdate as string = "INSERT INTO [CPD_Notes] ([qID], [Notes], [Notes_Date], [Username]) VALUES (@qID, @notes, @Date, @UserName1)"
Dim sqlCommand1 As System.Data.SqlClient.SqlCommand = New System.Data.SqlClient.SqlCommand(NotesUpdate, sqlConnection)
sqlcommand1.parameters.add("@qID", system.data.sqldbtype.varchar).value = qID
sqlcommand1.parameters.add("@Notes", system.data.sqldbtype.varchar).value = notes
sqlcommand1.parameters.add("@UserName1", system.data.sqldbtype.varchar).value = Username
sqlcommand1.parameters.add("@Date", system.data.sqldbtype.datetime).value = DateTime.now()
Dim rowsAffected As Integer = 0
trace.warn(strdate1)
sqlConnection.Open
Try
rowsAffected = sqlCommand.ExecuteNonQuery
Finally
End Try
dim rowsAffected1 as integer = 0
Try
rowsAffected1 = sqlCommand1.ExecuteNonQuery
Finally
End Try
Return rowsAffected
return rowsaffected1
sqlConnection.Close
End Function
View 4 Replies
View Related
Aug 17, 2005
Can anybody point me to a list of all valid string formats for passing in datetime variables into SQL server. Ideally I just want to put in a date and not bother with a time
View 3 Replies
View Related
Jul 25, 2006
I have been having a problem trying to connect to a SQL Server. I have installed the Developer edition on an MS Small Business edition 2003 server
I also installed MS Sql Manager and I was able to create a database and connect to it. The database server is in the same PC. I used the surface configuration to enable remote connections using TCP /IP and pipe lines.
My application runs without a problem on my development machine but when I deployed on this server I get the provider: SQL Network Interfaces, error: 25 - Connection string is not valid Error.
this is my config file setup
<connectionStrings> <add name="Diamond_dbConnectionString" connectionString="Data Source=192.168.1.104MSSQLSERVER;Initial Catalog=Diamond_db;Integrated Security=True" providerName="System.Data.SqlClient" /> </connectionStrings>
I have google and yahoo this error I found a lot of information I've tried many of them but still having the problem. I will appreciate your help solving this problem. I have a customer waiting since last week to see this site and I'm still stuck.
Tia
Charles
PS. Below I pasted the complete error info I get.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734995
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior) +162
System.Data.Common.DbDataAdapter.Fill(DataTable dataTable) +107
DiamondTableAdapters.COUNTRIES_TEMPLATETableAdapter.GetContriesTemplate() +108
[TargetInvocationException: Exception has been thrown by the target of an invocation.]
System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0
System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72
System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +296
System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29
System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +482
System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +2040
System.Web.UI.WebControls.BaseDataList.GetData() +53
System.Web.UI.WebControls.DataList.CreateControlHierarchy(Boolean useDataSource) +284
System.Web.UI.WebControls.BaseDataList.OnDataBinding(EventArgs e) +56
System.Web.UI.WebControls.BaseDataList.DataBind() +72
System.Web.UI.WebControls.BaseDataList.EnsureDataBound() +55
System.Web.UI.WebControls.BaseDataList.CreateChildControls() +63
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
View 6 Replies
View Related
Feb 2, 2007
I have installed SQL Server 2005 Developer edition. When I open SQL Server Management Studio, and try to connect to the database engine, I enter these credentials:Server name: LT2000MSSQLSERVERLogin: saPassword: my passwordWhen I try to connect I receive the following error:An error has occured while trying to establish a connection to the server. When connecting to SQL server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.(provider: sql network interfaces, error:25 - connection string is not valid)(Microsoft SQL Server, Error:87)What can I do?
View 5 Replies
View Related
Apr 9, 2008
hi
i am working with Asp.net2.0,Sqlserver2000.
i uploaded my developed application to the webserver.
all webpages are opening..bt when i try to interact with database it is raising error as following..
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
i set Enamble to namedPipes,Tcp/IP
i set Remote connection to enable
my web.config looks like this..
<?xml version="1.0"?>
<configuration> <appSettings>
<add key="cn" value="User ID=redot;Password=redot;Data Source=216.185.43.148:1423;Initial Catalog=redot" /> <!--<remove key="LocalSqlServer"/> ;ProviderName=System.Data.SqlClient-->
</appSettings> <connectionStrings> <!--<remove name="LocalSqlServer"/>-->
<add name="redotConnectionString" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString1" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString2" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString3" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString4" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString5" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString6" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString7" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString8" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString9" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> <add name="redotConnectionString10" connectionString="Data Source=216.185.43.148:1423;Initial Catalog=redot;User ID=redot;Password=redot" providerName="System.Data.SqlClient" /> </connectionStrings> <system.web>
<sessionState mode="InProc" stateConnectionString="tcpip=127.0.0.1:42424" sqlConnectionString="data source=216.185.43.148:1423;User ID=redot;Password=redot;Trusted_Connection=True" cookieless="false" timeout="60" />
<compilation debug="true" /> <!-- The <authentication> section enables configuration of the security authentication mode used by ASP.NET to identify an incoming user. -->
<customErrors mode="Off"> <error statusCode="404" redirect="filenotfound.htm" /> </customErrors>
</system.web> <system.net>
<mailSettings>
<smtp> <network host="216.185.54.55" port="25" /> </smtp> </mailSettings>
</system.net></configuration>
i will be very thankful ,if anyone help me to resolve this problem..
pls..its urgent for me
Thanks& Regards
Shobha
View 1 Replies
View Related
Mar 13, 2006
I am new to SSIS but I am learning fast. Any help is greatly appreciated.
I have written a custom log provider derived from LogProviderBase. I want to programmtically add the custom log provider to my package, but when I try this:
myPackage.LogProviders.Add("ACustomLogProvider");
I get the following exception:
"The log provider type "ACustomLogProvider" specified for log provider "{..GUID..}" is not recognized as a valid log provider type. This error occurs when an attempt is made to create a log provider for unknown log provider type. Verify the spelling in the log provider type name".
I have followed the instructions in BOL and as suggested in this forum, adding the DtsLogProvider attribute:
[DtsLogProvider(DisplayName="ACustomLogProvider", LogProviderType="ACustomLogProvider", Description="a description")]
Another way I tried is that I added a GUID attribute to my custom log provider class and then tried this:
Type aType = typeof(ACustomLogProvider);
Guid aGUID = (Guid)aType.GUID;
myPackage.LogProviders.Add("{"+ aGUID.ToString() +"}");
This also gives me the same exception "The log provider type ""{..the actual GUID for ACustomLogProvider..}" specified for log provider "{..a different GUID..}" is not recognized as a valid log provider type....
My questions are: Is it possible to add a custom log provider programmtically or must it be done through the SSIS Designer?
Must I deploy my custom log provider class for it to work programmatically? (I had perhaps wrongly assumed I would not have to deploy if I don't want it to show up in the SSIS Designer).
I would prefer to use a custom log provider instead of just logging within the SSIS event handlers because I can override the OnPostExecute, etc. but I cannot (can I?) override the specific event handlers like PackageStart, PackageEnd, etc because they are not exposed through DTSEvents.
Any help I would be very grateful for. Thanks.
View 8 Replies
View Related
Jul 12, 2007
Hi All,
i have migrated a DTS package wherein it consists of SQL task.
this has been migrated succesfully. but when i execute the package, i am getting the error with Excute SQL task which consists of Store Procedure excution.
But the SP can executed in the client server. can any body help in this regard.
Thanks in advance,
Anand
View 4 Replies
View Related
Jan 7, 2004
Hi All, can someone help me,
i've created a stored procedure to make a report by calling it from a website.
I get the message error "241: Syntax error converting datetime from character string" all the time, i tryed some converting things but nothig works, probably it is me that isn't working but i hope someone can help me.
The code i use is:
CREATE proc CP_Cashbox @mID varchar,@startdate datetime,@enddate datetime
as
set dateformat dmy
go
declare @startdate as varchar
declare @enddate as varchar
--print "query aan het uitvoeren"
select sum(moneyout) / sum(moneyin)*100 as cashbox
from dbo.total
where machineID = '@mID' and njdate between '@startdate' and '@enddate'
GO
Thanx in front
Cya
View 14 Replies
View Related
Jun 6, 2008
I have a dropdown list thats boudn to a SqlDataSource. The DataSource looks like this:
<asp:SqlDataSource ID="dsProgramList" runat="server" ConnectionString="<%$ ConnectionStrings:csData %>"
SelectCommand="SELECT DISTINCT [Program_Name] +','+ [Begin_Date] AS NAMEandDATE, [Course_ID], [LOC] FROM [ThisTable] WHERE ([LOC] = @LOC)">
<SelectParameters>
Where the dropdownlists text = NAMEandDATE and its value = Course_ID
When I select the LOC from the LOCdropdownlist, the dropdownlist in question updates, and an error "Erro converting datetime from character string" happens?
Any suggestions?
View 4 Replies
View Related
May 29, 2014
I am trying to create a stored procedure that Pulls in Chargeable and Non Chargeable hours for our employees however When I run the Stored Procedure I get this error "Conversion failed when converting date and/or time from character string." I am having a hard time figuring out were this is happening in the Stored Procedure. Also I would like to be able to Add a parameter that would be the StartDate and EndDate for which the stored procedure would pull time for.
ALTER PROCEDURE [dbo].[Chargeability]
-- Add the parameters for the stored procedure here
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
[Code] ......
View 9 Replies
View Related
Aug 6, 2004
Here's the deal. I'm a newbie trying to update a date (@Effective) in sql server. I've been trying all sorts of things, but nothing seems to work. Here's my current code:
Sub btnUpdate_Click(sender As Object, e As EventArgs)
Dim sqlStmt As String
Dim conString As String
Dim cn As SqlConnection
Dim cmd As SqlCommand
Dim sqldatenull As SqlDateTime
Try
sqlStmt = "UPDATE [Submission] SET [Effective]=Convert(DateTime, '@Effective', 101), "& _
"[Status]=@Status WHERE ([Submission].[Submission]=@Submission)"
conString = "server='(local)'; user id='sa'; password='password'; database='database'"
cn = New SqlConnection(conString)
cmd = New SqlCommand(sqlStmt, cn)
cmd.Parameters.Add(New SqlParameter("@Submission", SqlDbType.Int, 4))
cmd.Parameters.Add(New SqlParameter("@Effective", SqlDbType.VarChar, 10))
cmd.Parameters.Add(New SqlParameter("@Status", SqlDbType.VarChar, 8))
sqldatenull = SqlDateTime.Null
If (txtEffective.Text = "") Then
cmd.Parameters("@Effective").Value = sqldatenull
Else
cmd.Parameters("@Effective").Value = txtEffective.Text
End If
cmd.Parameters("@Status").Value = dropStatus.SelectedItem.Text
cmd.Parameters("@Submission").Value = LabelSubmission.Text
cn.Open()
cmd.ExecuteNonQuery()
cn.Close()
Response.Redirect("main.aspx")
Catch ex As Exception
lblError.Text = ex.Message
Finally
cn.Close()
End Try
End Sub
My db is setup as follows:
Submissionint4
Insuredvarchar30
Statevarchar2
Effective datetime 8
Underwritervarchar9
Statusvarchar8
Cleareddatetime 9
I'm losing my hair by the fist full... Somebody please stop the insanity!
View 2 Replies
View Related
Apr 20, 2005
Somewhere, either in the
aspx.vb code, or the stored procedure that's being called, it doesn't
like my code since I am getting the dreaded "syntax error converting
datetime from character string" error. I've been battling this
for two days - can someone spot what is wrong here?
The dtWdate variable is coming from a calendar control on my aspx page.
Please help - I've tried every conceivable way I can think to do this without success.
Lynnette
Here's the code:
Private Sub GetFLSAEmpInfoRecs()
'uses the AppSettings table to generate WHERE clause from the filter values
Dim dtWdate As DateTime = Calendar1.SelectedDate
Dim wValue As String = Session("svFilterValue")
Dim cnn As New SqlConnection(constants.SQLConStrFLSA)
Dim cmd As New SqlCommand("usp_AddFLSA", cnn)
cmd.CommandType = CommandType.StoredProcedure
cnn.Open()
cmd.Parameters.Add(New
SqlParameter("@dtWDate", SqlDbType.DateTime)).Value =
Convert.ToDateTime(dtWdate)
cmd.Parameters.Add(New
SqlParameter("@whereString", SqlDbType.VarChar, 500)).Value = wValue
cmd.ExecuteNonQuery()
cnn.Close()
End Sub
And here is the stored procedure:
ALTER PROC usp_AddFLSA
@dtWdate datetime,
@whereString as varchar(255)
AS
DECLARE @strSQL as varchar(2000)
SET @strSQL =
'
INSERT INTO FLSAEmpInfo
( Emp_Number,
PT_ID,
Emp_Division,
Emp_DeptInfo,
Emp_Supervisor,
Emp_Location,
Emp_Union,
Emp_SG,
Emp_Shift,
WrkDate
)
SELECT
hcsoSharedTables.dbo.Employee2.Emp_Number,
hcsoSharedTables.dbo.Employee2.[ID],
hcsoSharedTables.dbo.Employee2.Division,
dbo.udf_getDeptInfo(hcsoSharedTables.dbo.employee2.Department,hcsosharedtables.dbo.employee2.Dept_Mgr,hcsosharedtables.dbo.employee2.job_dept_code),
hcsoSharedTables.dbo.Employee2.Job_Supervisor,
hcsoSharedTables.dbo.Employee2.Loc_Name,
hcsoSharedTables.dbo.Employee2.[Union],
hcsoSharedTables.dbo.Employee2.Sched_Group,
hcsoSharedTables.dbo.Employee2.Shift,' +
@dtWdate + ' ' + 'FROM hcsoSharedTables.dbo.Employee2' + @whereString
EXEC(@strSQL)
View 4 Replies
View Related
Nov 14, 2005
Hi all, The last week this was working, and today i was testing and all start with errors. This is my SQL sentence:command = New SqlCommand("update ctlg_users set u_last_access = '" & FormatDateTime(Now(), 1) & "' where u_id = " & cstr(l_u_id),oConn)Is there an error? why was before working and now don`t?, including an old ASP page that i´m still using fall back to the same error when is using FormatDateTime, í´ve tried in the ASPX page using datetime.now.tostring("dd/mm/yyyy") but i got an error too!! HEEEELP!Thanks :D
View 2 Replies
View Related
Nov 24, 2005
Hi,
I'm having a strange problem with the following stored proc:
Code:
sql
declare @orderBy tinyint
set @orderBy = 2
SELECT tblUsers.userID, firstName, lastName, dateRegistered, count(movieSessionID) As sessionsCount FROM tblUsers
LEFT JOIN tblMovieSessions on tblUsers.userID = tblmovieSessions.userID
Group By tblUsers.userID, firstName, lastName, dateRegistered
Order By Case
WHEN @orderBy = 2 THEN firstName
WHEN @orderBy = 3 THEN dateRegistered
WHEN @orderBy = 4 THEN count(movieSessionID)
else lastName
End desc
When I execute it with @orderBy = 1 or 2 I get the following error message: Quote: Server: Msg 241, Level 16, State 1, Line 5
Syntax error converting datetime from character string.
However, with @orderBy = 3 or 4 it executes successfully.
I don't understand why this change should have this impact because the error seems to be occuring on the first line (i.e. SELECT...).
If I take the dateRegistered column out of the query I get a new error message:
Quote:
Server: Msg 245, Level 16, State 1, Line 5
Syntax error converting the nvarchar value 'Adam' to a column of data type int.
I don't understand why it is trying to convert these columns during the query anyway, let alone how to solve the problem.
Anyone got any ideas?
View 1 Replies
View Related
Sep 29, 2005
I am using INSERT to replace about 160 fields for one company in the company table, all goes well until I come to the Rn_edit_date field which is a datetime datatype. When I insert the value of:
cast('2005-03-15 09:25:44.463' as datetime)
Error message as a result is: Syntax error converting datetime from character string.
NOTE: 2005-03-15 09:25:44.463 is the correct format which all other companies abide by, so I'm totally lost at where I'm going wrong?
Any help would be appreciated
View 5 Replies
View Related
Jul 15, 2015
I am using derived column to convert string data to datetime .My string data :
Start Date
15/06/2015
30/06/2015
NULL
2015/06/24
I wrote in derived column expression:
(DT_DATE)(SUBSTRING(([Start Date]),7,2) + "/" + SUBSTRING(([Start Date]),5,2) + "/" + SUBSTRING(([Start Date]),1,4))
which is giving error :
[Derived Column 1 [5452]] Error: The "component "Derived Column 1" (5452)" failed because error code 0xC0049064 occurred, and the error row disposition on "output column "Start Date" (5650)" specifies failure on error. An error occurred on the specified object of the specified component.
How to write the expression in derived column to handle null value as well.
View 5 Replies
View Related
Jun 22, 2007
I am having a problem on running the following queiry
select * from my_table where unitclass_id=247
and Year(cast (column1 as datetime))=Year(dateadd(wk,0,getdate()) )
column1 type nvarchar(10) and stores date in format like 2007-06-22.
I am trying to select all records for the current year from my_table and getting an error
when running that queiry
Syntax error converting datetime from character string.
Please help
Thank you
View 8 Replies
View Related
Mar 6, 2008
I have a field that has dates that are currently set as a string. Dates are as follows:
Apr 01 2006
Aug 20 2006
Aug 20 2006
I did an isdate() function on the field to see if it can be converted and it came back as true; however, I have attempted several different ways to convert the field to a date field and it continues to give me a syntax error. Any assistance would be great!!!
I tried:
convert(datetime,cast(New_Date as varchar),100)
convert(varchar(25),New_Date,107)
Both gave me syntax errors.
View 10 Replies
View Related
Nov 14, 2007
When I convert this data into a datetime, i get the foll error.
Syntax error converting datetime from character string.
SELECT convert(datetime,'09/2007')
Basically I have a field in a tbl that has varchar datatype, and is in this format of mm-yyyy. I need to compare this value to current date and so I convert it to datetime. but it errs
Pl help
View 3 Replies
View Related
Jul 20, 2005
CREATE PROCEDURE dbo.Synchronization_GetNewRecords(@item varchar(50),@last datetime)ASSET NOCOUNT ONDECLARE @sql nvarchar(4000)SET @sql = 'SELECT * FROM ' + @item + ' WHERE LastUpdated >' + @lastEXEC sp_executesql @sql, N'@Type varchar(50), @Last datetime', @item, @lastThis is my SP. Very simple. But it is throwing the error in the subject line.Any help would be greatly appreciated.
View 1 Replies
View Related
May 22, 2008
i have a stored proc running against the Northwind DB
Code Snippet
CREATE PROCEDURE CustomPaging
@intOrderID varchar(10),
@strCustomerID varchar(10),
@intEmployeeID int,
@dteOrderDate datetime,
@startRowIndex int,
@maximumRows int,
@SortOrder int
AS
DECLARE @TempItems TABLE
(
ID int IDENTITY,
OrderID int
)
DECLARE @maxRow int
SET @maxRow = (@startRowIndex + @maximumRows) - 1
SET ROWCOUNT @maxRow
INSERT INTO @TempItems (OrderID)
SELECT OrderID
FROM Orders o
INNER JOIN Customers c ON c.CustomerID = o.CustomerID
INNER JOIN Employees e ON e.EmployeeID = o.EmployeeID
ORDER BY CASE @SortOrder WHEN 0 THEN OrderID
WHEN 1 THEN c.CompanyName
WHEN 2 THEN e.FirstName
WHEN 3 THEN o.OrderDate
WHEN 4 THEN o.RequiredDate
WHEN 5 THEN o.ShippedDate END
SET ROWCOUNT @maximumRows
SELECT o.OrderID, CompanyName, e.FirstName + ' ' + e.LastName EmployeeName, o.OrderDate, o.RequiredDate, o.ShippedDate
FROM @TempItems t
INNER JOIN Orders o ON o.OrderID = t.OrderID
INNER JOIN Customers c ON c.CustomerID = o.CustomerID
INNER JOIN Employees e ON e.EmployeeID = o.EmployeeID
WHERE
t.[ID] >= @startRowIndex
AND
(o.OrderID LIKE @intOrderID OR @intOrderID = '')
AND
(o.CustomerID = @strCustomerID OR @strCustomerID='')
AND
(o.EmployeeID = @intEmployeeID OR @intEmployeeID = 0)
AND
(o.OrderDate = @dteOrderDate OR @dteOrderDate IS NULL)
SET ROWCOUNT 0
GO
when i execute the sp with @sortOrder = 0, it works fine
exec CustomPaging '','',0,null, 1, 10, 0
but if i try anything else (@SortOrder=1) i get the error message
exec CustomPaging '','',0,null, 1, 10, 1
Syntax error converting datetime from character string.
but im unsure what is causing this problem? and how to sort it?
Any help is greatly appreciated.
Cheers.
Craig
View 13 Replies
View Related
Apr 12, 2007
I've build a website with asp.net and on my local machine it run very we. but when I store my website on a server, I have a error : ...error: 25 - Connection String not valid...
This is my connection string on my local machine : "add name="csIyp" connectionString="data source=.SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|iyapason.mdf;User Instance=true" providerName="System.Data.SqlClient" "
And the connection string on my webserver : "add name="csIyp" connectionString="data source= .MSSQLSERVER;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|iyapason.mdf;User Instance=true" providerName="System.Data.SqlClient" "
So, what can I do to solve this probleme.
Thanks !
View 3 Replies
View Related
Mar 11, 2014
I am inserting date and time data into a SQL Server 2012 Express table from an application. The application is providing the date and time as a string data type. Is there a TSQL way to convert the date and time string to an SQL datetime date type? I want to do the conversion, because SQL displays an error due to the
My date and time string from the application looks like : 3/11/2014 12:57:57 PM
View 1 Replies
View Related
Aug 12, 2007
Hi.. Please help me resolve this error "Cast from string 'OPEN' to type 'Double' is not valid.". Error here If CallStatus = 10 Then ....Code:Public Sub UpdateCallStatus() Dim CALLID, RequestorID, CommentsFromITD, MessageFromITD, MessageToITD, CallStatus, strSQL As String CALLID = Request.QueryString("CallID") RequestorID = Session("USER_ID") CommentsFromITD = lblcomments.Text MessageFromITD = lblmessage.Text MessageToITD = txt_desc.Text CallStatus = Trim(Request.Form(ddl_callstatus.UniqueID))
Dim ObjCmd As SqlCommand Dim ObjDR As SqlDataReader
Try If CallStatus = 10 Then strSQL = "UPDATE CALLS SET STATUS_ID=" & CallStatus & " WHERE CALL_ID= " & CALLID & "" ObjCmd = New SqlCommand(strSQL, ObjConn) ObjConn.Open() ObjDR = ObjCmd.ExecuteScalar() gbVariables.insertuserevents(CALLID, RequestorID, "Call Closed") Response.Redirect("UserCallClosed.aspx") ObjConn.Close() Else strSQL = "UPDATE CALLS SET STATUS_ID=" & CallStatus & " WHERE CALL_ID= " & CALLID & "" ObjCmd = New SqlCommand(strSQL, ObjConn) ObjConn.Open() ObjDR = ObjCmd.ExecuteScalar() ObjConn.Close()
strSQL = "SELECT STATUS_LABEL FROM STATUS WHERE STATUS_ID = " & CallStatus & "" ObjCmd = New SqlCommand(strSQL, ObjConn) ObjConn.Open() ObjDR = ObjCmd.ExecuteScalar() ObjConn.Close()
gbVariables.insertuserevents(CALLID, RequestorID, CallStatus) CallStatus = "" End If Catch ex As Exception lblmsg.Text = ex.Message.ToString End Try End SubThanks...
View 1 Replies
View Related
Apr 18, 2015
I have a table with one of the column(EmpHiredate) datatype is char(10). It has value like "20141023". I need to display this value as date format(dd/mm/yyyy) in report. Following methods i tried in textbox expression but no luck.
=Format(Fields!EmpHireDate.Value,"dd/MM/yyyy")
=Cdate(Fields!EmpHireDate.Value)
Error:[rsRuntimeErrorInExpression] The Value expression for the textrun ‘EmpHireDate.Paragraphs[0].TextRuns[0]’ contains an error: Conversion from string "20041023 " to type 'Date' is not valid.
Is it possible to convert string to date using SSRS textbox expression ?
View 7 Replies
View Related
Jan 30, 2007
Hello All,
Can anyone tell me what is error is and how to resolve it?
Thanks.
View 4 Replies
View Related
May 16, 2013
I am trying to execute a stored proc like this
Declare @cmd varchar(1000)
Declare @Path1 varchar (1000)
Declare @user_id varchar (50)
Declare @password varchar (50)
set @cmd = 'exec' + ' ' + stored_proc_name' + ', ' + @user_id +', ' + @password + ', ' + @Path1
exec master..xp_cmdshell @cmd
ERROR I am getting = 'exec' is not recognized as an internal or external command,
View 2 Replies
View Related
Jul 11, 2007
Dear All, I have a simple mining structure created by the DMX statement below. Then I tried to insert some data with MDX language by extracting data in OLAP. But I got the following error when I execute the insert statement.
Errors in the high-level relational engine. The 'Customer ID' column in the RELATES clause was not found in the results of the OPENROWSET query.
It seems that the append statement can't really recognize the name of the column which should be Customer ID.
How can I fix this problem?
Thanks
Tony Chun Tung Siu
The source code for create and insert is as below.
create mining model customerMiner
(
customerID long key ,
age long continuous,
orders table
(
orderID long key,
goodsID long discrete predict_only
)
)using [Microsoft_decision_trees] with drillthrough;
insert into mining model customerMiner
(
customerID,
age,
orders
(
skip,
orderID,
goodsID
)
)
shape
{
openQuery([Simple SSAS],
'
select {[Measures].[Customer ID], [Measures].[Age]} on columns,
{[Customer].[Customer].[Customer].members} on rows
from fi
')
}
append
(
{
openQuery([Simple SSAS],
'
select {[Measures].[Customer ID],[Measures].[Order ID2],[Measures].[Goods ID]} on columns,
[Goods].[Order ID2].[Order ID2].members on rows
from fi
')
}
relate [Customer ID] to [Customer ID]
)as orders
View 1 Replies
View Related
