Error When Trnsaction Option Is Required
Mar 17, 2008
Hi,
I have set the option as required oon the sequence container and the tasks in it as supposrted ..it fails saying cannot acquire connection ..In all forums they are saying need to check system properties..but i sont have the right to do so
Is there any other alternative to provide a rol;lback on failure or handle this connection error without changing systme setting..
Please Help!!!!
View 4 Replies
ADVERTISEMENT
Apr 27, 2008
Hi everyone In my SqlServer Management Studio Express, on start up it shows the server type option, but greyed.So that value is fixed to database engine. ( I'm trying to work on an SqlServer Compact Edition database through the SSMStudiothat's why I'm trying to get this to change.)Besides, after I connect i go to the Object Explorer, expand the server node, and go to Replication.When i expand replication, i get the "Local Subscription" option, but nothng for Publication.( I want to work on Merge Replication, that's why I desparately need Publication to work)Am i missing something here? I did not install SqlServer separately, I only have what comes bundled with the Visual Studio 2005 Setup.
View 2 Replies
View Related
Mar 8, 2004
Hi everybody,
I' m working with visual basic 6 and I would like to connect to my sql server database but I get the following error :
"Run-time error 424":object required.
here is my code:
sqlserverlocation = "192.168.0.102"
sqldbname = "NUTS_MEETDB2"
application.lock
sConnection = "DRIVER={SQL SERVER};Server=" & sqlserverlocation & ";Database=" & sqldbname & ";UID=AiSE_RW;PWD=3333"
Set myConn = Server.CreateObject("ADODB.Connection")
myConn.Open sConnection
SQLST = "Select [close] from Quotes order by date asc"
Set myKeyRst = Server.CreateObject("ADODB.RecordSet")
Set myConRst = myConn.Execute(SQLST, , 1)
myKeyRst.Open SQLST, myConn, 1
the erroe is located at the line :
Set myConn = Server.CreateObject("ADODB.Connection")3
thank you
View 3 Replies
View Related
Jan 9, 2007
Hello friends, I have been trying to install SQL Server2005 but I can't. I have .Net framwork 2.0 on my computer. At the end of installation at Reporting Services the following error occurs.
Error: The required version of .Net framwork is not installed.
So first I installed .Net framwork SDK, the problem was same. After that I install .Net framwork 3.0 direct from microsoft but all in vain.
Now I need help about which of the .Net framwork must be installed on computer before installing SQL Server2005.
Thaks a lot..
View 2 Replies
View Related
Apr 18, 2006
Dear Friends,
I am very new to replication, For learning purpose I am trying to setup merge replication. The given setup I am using.
1. Windows 2000 Server + SP4 (Publisher for SQL 2000)
2. Windows 2003 Server + SP1 (Subscriber For SQL 2000)
I am getting a replication error, I have taken this errors details from merge agent on publisher server.
Find enclosed replication error details in the microsoft document file format (.doc). The document is consist of three SQL Server snapshot rather three diffrent errors.
In the pictures you can find the red & white color cross (wrong sign) on replication monitor tab, I don't know why it is appearing. :confused:
Kindly, give me guidance to rectify this error & setup the marge replication between two SQL 2000 Servers.
View 2 Replies
View Related
Apr 11, 2007
I have created a linked server that connects to "mpp" file, and it connects and opens successfuly returning a list of tables that exists in the linked server to the mpp file.
But the problem i am facing now that whne i write a select statment to get data from the tables in this linked server
select * from linktompp.testmpp.dbo.tasks
such that linktompp is the linked server name
testmpp is the catalog name
tasks is the table name i need to select data from
it shows an error that says
"Could not obtain a required interface from OLE DB provider 'Microsoft.Project.OleDB.11.0'."
"[OLE/DB Provider 'Microsoft.Project.OleDB.11.0' IUnknown::QueryInterface returned 0x80004002: IGetDataSource]"
could anyone tell me the reason of this error
thanks
View 1 Replies
View Related
May 16, 2015
Below code gives the error "No value given for one or more required parameters"
strSQL = "insert into FILE_UPLOAD(RefNo, FileName, FileType, FileData, FileDescription, Created, CreatedBy) values "
strSQL = strSQL & "(?, ?, ?, ?, ?, ?, ?)"
Dim cmd As New OleDbCommand
cmd.Connection = objCommon.oConn
cmd.CommandText = strSQL
cmd.Parameters.Add("@RefNo", OleDbType.VarChar).Value = ""
cmd.Parameters.Add("@FileName", OleDbType.VarChar).Value = strFileName
[code]....
View 3 Replies
View Related
Feb 28, 2008
Hello,
We are migrating the SP from 2000 -> 2005, in my previous verriosn they are using WITH LOG option to store the error messges in to the Applicatin log and System log.When migrated to 2005 and I tried to run that i got error messgae like "Only System Administrator can specify WITH LOG option for RAISERROR command.".
Is there any possbility that without granting admin access to the developers that we can run this stored proceedure.
My DBAs dont want to provide the admin access to all developers to execute this SPs is there any work around for this problem.
please help me out.
suggest me if there any other ways to handle this situation.
I hope i will be answered by some one.
Thanks
Thanks
-----------------
Ram MCP
View 1 Replies
View Related
Jul 20, 2005
I?m getting an error when I execute a stored procedure which is try to insert a row to a table.The error is:Server: Msg 1934, Level 16, State 1, Procedure SRV_SP_IS_EMRI_SATIRI_EKLE, Line 32INSERT failed because the following SET options have incorrect settings: 'ANSI_NULLS.'.In my sp, I insert an row to a table. But also I created a view which is select some fields from this table.(Note: Some fields are calculated fields in this view. To see if calculated fields cause this error , I didnt selec calculated fields in the view, but I?m still getting this insert error.One more note: My indexed field is an identity field also.) I think, index causes this error. But I cant find my error.Thank you for your help...To do this view, I execute this code:drop view SRV_V_GARANTILI_IS_EMRI_SATIRLARI_TgoCREATE VIEW dbo.ViewTwith SCHEMABINDING ASSELECTS.FieldA,....S. FieldHFROMdbo.TABLE SWHERE(S.FieldA = 1) AND (S. FieldB IS NULL) AND (S.FieldH IN (0,1))goSET NUMERIC_ROUNDABORT OFFGOSET ANSI_PADDING,ANSI_WARNINGS,CONCAT_NULL_YIELDS_NULL ,ARITHABORT,QUOTED_IDENTIFIER,ANSI_NULLS ONGOcreate unique clustered index ViewT_IX_FieldA on ViewT (FieldA)go****************************************** This message was posted via http://www.sqlmonster.com** Report spam or abuse by clicking the following URL:* http://www.sqlmonster.com/Uwe/Abuse...d4cddba67ade8b6*****************************************
View 7 Replies
View Related
Jun 4, 2002
Hi Friends ,
When i try to copy one table , say for e.g table x from SQL 6.5 to SQL 7.0 it gives me an error that -
'Insert Error , column 46 ( 'Coloumn_name ',DBTYPE_DBTIMESTAMP), Status 6 :
Data overflow .
Invalid character value for cast specification .'
This column on the source server ( SQL 6.5 ) has datatype 'datetime ' with value 8 and is NULL .
Although there are other columns in this table with datatype as 'datetime' as 8 and NULL , they have been copied successfully to the destination table .Only this specific column is giving an error while copying data .
I am using import export wizard to copy data between servers .
Since i have no experience with this , would like to have a solution from you to this problem. It will be great help for me .
Thank you very much ,
Alisha .
View 1 Replies
View Related
Jun 10, 2005
I select the option execution from a report (it's in properties option) and then raise an error which says An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help EXECUTE permission denied on object 'xp_sqlagent_notify', database 'mssqlsystemresource', schema 'sys'.
View 29 Replies
View Related
Jan 3, 2008
Hi,
I am using Microsoft SQL Server 2000 Desktop Engine (MSDE 2000). When I restart the SQL Service, it fails to do so. I have tried running the service in command prompt & got the following error:
Error: 9003, Severity: 20, State: 1.
Cannot recover the master database. Exiting.
Kindly help as it is quite urgent & I can not afford to loose any data. Thanks.
View 3 Replies
View Related
Aug 10, 2006
Hi,
I have designed a report in sql server reporting services using SQL Server Bussiness Intelligence Studio tool. I have applied sorting feature for a column. Sorting facility is working fine when there is one or more records.
Its giving "object required" Java Script error When there is no record. Kindly help me how to fix this issue.
Regards
Sagayaraj R
View 7 Replies
View Related
Sep 4, 2015
I'm trying to create an SSIS package job in SQL server 2014 but I get the following error when trying to change the Package source and confirm. I have alsredy checked the connection mangers and they were all successful, I'm not sure what I should be checking.
"Make sure that the required parameter "name of parameter" is set".
View 2 Replies
View Related
Mar 25, 2008
Hi,
I have created a few packages and i want to execute this in a sequence so I created a wrapper/parent package and added all the other packages as child Package using the Execute Package Task. These packages are file system based packages. I am executing the wrapper/parent package from a web page which will execute all the child packages. All is well and works fine when I choose the TransactionOption as "Supported" in my wrapper/parent package but when I choose the TransactionOption as "Required" in my wrapper/parent package I get the following error
Error Occurred: The package is failed due to following: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D024 "The transaction manager has disabled its support for remote/network transactions.".
What I am doing is connecting to 3 DB in the same server and doing some data manipulation. The MSDTC is running in the Target SQL Server and also the DTC Server in my Local is started and running. What else could be the problem.
Thanks in advance for any and all help
View 1 Replies
View Related
Aug 20, 2007
I keep getting this error message on the subscription execution, even though the account is a domain administrator. Both publisher and subscriber are on the same domain. Can someone tell me what is the problem?
Message
Replication-Replication Distribution Subsystem: agent [Agent Name] failed. Executed as user: [Domain]administrator. A required privilege is not held by the client. The step failed.
Regards,
View 1 Replies
View Related
Apr 15, 2006
As the title indicates, I'm having this error during installation. It occurs when I try to install
the "Management Studio" part of the program. I've tried a bunch of things like
copying to hard drive and installing, but to no avail. To isolate the problem, i've even tried removing Reporting services, since at the time of failure it seems to be trying to install/configure the Microsoft.Reporting Services dll.
Additionally, I have SQL Express installed (installed it separately, not as part of the SQL 2005 DVD), VS 2005, .NET Framework 2.0, SQL Management Studio Express CTP. Could the Management Studio Express be causing a problem?
Please note:
Although the error is about missing / corrupt Sql.cab, I have searched the entire dvd for the said file, but there is no file called Sql.cab on the dvd. Am I missing something?
Any solution would be greatly appreciated.
TIA
View 23 Replies
View Related
Jan 21, 2004
I'm using a software called epi suite which is used to print id badges. The system is currently running on an access database and everything works according.
I am trying to migrate it off access to SQL 2k and have run into a problem when trying to insert data back into the system.
I can pull back data w/o any problems (to view and even print badges) but the minute I try to Save anything [New Image or change the card to unprinted], it comes back with the error:
Failed to save the card record.
Database error: Invalid attribute/option identifier
Error HY092[Microsoft][ODBC SQL Server Driver]
Has anybody ran into this type of situation before? The problem is, the company will only support access and says that SQL is a use at your own risk type of deal.
I'm new to using MS SQL so I am unsure what the best solution would be to try and find the problem. Is it possible that the software is just sending some sort of malformed query over to the database? Anything I have found on that error [HY092] seems to point in that general direction.
Thanks for your help.
View 4 Replies
View Related
Feb 14, 2008
I have a report with a fixed header that works properly when the query returns results (or fixedheader = false). However, when the result set is empty, I get tenacious client-side "object required" errors. Obviously I can either turn the fixedheaders off or disable debugging in IE, but is there a Microsoft fix for this problem?
View 1 Replies
View Related
Oct 9, 2007
Hi,
I am getting an error when i am trying to insert some value to the sql ce database
"QP is missing and it is required to evaluate default expressions. Ensure that sqlceqp30.dll is in the same directory as the storage engine (sqlcese30.dll)"
Please help
Thanks
Nebu
View 1 Replies
View Related
Jan 28, 2014
A customer use SCSM 2012 RTM and recently they changed the password of the account that connects with the datasources that use Service Manager to generate reports. There are several datasources namely DWStagingAndConfig, ConfigurationManager, DWDataMart and other ones.The process to change the password of the account, done via web in the SSRS URL instance of Service Manager, requires to enter in the Manage option of each DataSource and replace the password with the right one in the Properties section; is a really simple step. However, after the change, the only Datasource that not allows to access again to the Manage option is DWStagingAndConfig (appears a message that points out to a report server internal error);I append a extract of the SSRS log related to the problem with this Datasource.
library!ReportServer_0-109!3024!01/22/2014-14:54:14:: Call to GetPermissionsAction(/SystemCenter/ServiceManager/DWStagingAndConfig).
library!ReportServer_0-109!8820!01/22/2014-14:54:14:: Call to GetSystemPermissionsAction().
library!ReportServer_0-109!8820!01/22/2014-14:54:14:: Call to GetSystemPropertiesAction().
library!ReportServer_0-109!8ab8!01/22/2014-14:54:15:: Call to GetDataSourceContentsAction(/SystemCenter/ServiceManager/DWStagingAndConfig).
library!ReportServer_0-109!8ab8!01/22/2014-14:54:15:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException:
[code]...
View 11 Replies
View Related
Feb 10, 2015
So I started a new job recently and have noticed a few strange configurations. Typically I would never mess with min memory per query option and index create memory option configuration because i just haven't seen any need to. My typical thought is that if it isn't broke... They have been modified on every single server in my environment.
From Books Online:
• This option is an advanced option and should be changed only by an experienced database administrator or certified SQL Server technician.
• The index create memory option is self-configuring and usually works without requiring adjustment. However, if you experience difficulties creating indexes, consider increasing the value of this option from its run value.
View 3 Replies
View Related
Apr 9, 2007
Hi all,
I was wondering whether there is a way to show the user an error when the user did not select a specific parameter.
In my case, I have two optional parameters. The user has to select either one to view the report. If the user does not select either one, I would like to show some sort of an error page indicating so. However, all i am getting is a complete blank with no report in sight. I as a developer know this is an error as a result of missing parameters, but i was wondering whether I could produce a page or direct it to a page so that the user doesn't go all horrified at an empty page ?
Thanks
Bernard
View 4 Replies
View Related
Jun 27, 2007
I need to create either a sql query or a procedure and i am not sure how to go about it.Simply i have two fields in a table. 1 for products values and 1 for how many of that product was purchased.What i am wondering is how to calculate this in a sql query.can someone help pleaseIlan
View 5 Replies
View Related
Aug 27, 2007
I am deleting a database but I am not seeing any entry in server logs or in event viewer. and same thing is happens when I am deatching a database.Can any body tell me the way through which I can know when a particualr database was deleted or deatched.
View 2 Replies
View Related
Mar 30, 2004
Psting For Charan,
Hi,
I am trying to connect MS SQL 2000 with C language using ODBC drivers in win 2k environment
i have a UTF 8 string stored in a nvarchar field of the MS SQL table and i am trying to retrieve this field from C and store it in a txt file
everythin is working perfectly fine the probs is that the UTF 8 string is not getting being retrieved correctly
Help Required Urgently
Tks in Adv
Ssg
View 1 Replies
View Related
Oct 26, 2007
Hello All,
When I execute my SP it throws an error.
Could not allocate space for object '(SYSTEM table id: -449020546)' in database 'TEMPDB' because the 'DEFAULT' filegroup is full.
Any help is apperciated.
Nirene
View 2 Replies
View Related
Dec 5, 2007
Hello All,
I have 2 tables Trans & Slmast
In Trans
Tran_type,Tran_amt,Slcode
----------------------------
VES,10000.00,AB01
DBN,20000.00,AB01
CRN,30000.00,AB01
BRT,40000.00,AB01
DBN,10000.00,AB02
CRN,50000.00,AB02
BRT,20000.00,AB03
CRN,30000.00,AB03
In Slmast
Slcode,Sldesc
--------------
AB01,ABC Ltd
AB02,CAB Ltd
AB03,BAC Ltd
All transaction related datas will be in Trans for which Slmast is the master.
I want to sum those records based on slcode,tran_type for slcode which does not have tran_type with 'VES'
Sample Output
Slcode,Sldesc,DBN,CRN,BRT
AB02,CAB Ltd,10000,50000,0
AB03,BAC Ltd,0,30000,20000
View 7 Replies
View Related
Jan 2, 2008
CREATE PROCEDURE VEHICLE_OUTSTANDING @SDt Varchar(10),@EDt Varchar(10),@Cocode Varchar(5),@Brcode Varchar(5),@Loccode Varchar(5),@GLCode Varchar(6)
AS
Select (Loccode+Glcode+Slcode) as LGS,Refno,Refdt Into #VST from Trans_Transnarr
Where Trtype='VES' and (Refdt>=Convert(Datetime,@SDt,103) and
Refdt<=Convert(Datetime,@EDt,103))
and (Cancflg Is Null or Cancflg='R') and Loccode=@Loccode and Glcode=@Glcode
Select Sl.Sldesc,Tr.Loccode,Tr.Glcode,Tr.Slcode,
X.Refno,Convert(Varchar,X.Refdt,103) as Refdt,
Sum(Case When Tr.Trtype='VES' Then Tr.Tramt Else 0 End) as VES,
Sum(Case When Tr.Trtype='DBN' Then Tr.Tramt Else 0 End) as DBN,
Sum(Case When (Tr.Trtype='CPM' or Tr.Trtype='BPM') Then Tr.Tramt Else 0 End) as Refund,
Sum(Case When (Tr.Trtype='JNL' and Tr.Drcrflag='D') Then Tr.Tramt Else 0 End) as JNLD,
Sum(Case When Tr.Trtype='SPS' Then Tr.Tramt Else 0 End) as SPS,
Sum(Case When (Tr.Trtype='CRT' or Tr.Trtype='BRT') Then Tr.Tramt Else 0 End) as Receipt,
Sum(Case When Tr.Trtype='ADV' Then Tr.Tramt Else 0 End) as ADV,
Sum(Case When Tr.Trtype='CRN' Then Tr.Tramt Else 0 End) as CRN,
Sum(Case When (Tr.Trtype='JNL' and Tr.Drcrflag='C') Then Tr.Tramt Else 0 End) as JNLC,
Sum(Case When Tr.Trtype='SRT' Then Tr.Tramt Else 0 End) as SRT
Into #VOS from Trans_Journal Tr,Slmast Sl,#VST X
Where (Sl.Loccode=@Loccode and Tr.Glcode=Sl.Glcode and Tr.Slcode=Sl.Slcode) and
(Tr.Loccode+Tr.Glcode+Tr.Slcode)=X.LGS and (Tr.Cancflg Is Null or Tr.Cancflg='R')
Group By Tr.Loccode,Tr.Glcode,Tr.Slcode,Sl.Sldesc,X.Refno,X.Refdt
ALTER TABLE #VOS ADD OPDR Float,OPCR Float
UPDATE #VOS SET #VOS.OPDR = S.DRAMT,#VOS.OPCR = S.CRAMT FROM #VOS,
(SELECT GLCODE,SLCODE,
(CASE WHEN DRCRFLAG = 'D' THEN OPBAL ELSE 0 END) AS DRAMT,(CASE WHEN DRCRFLAG = 'C' THEN OPBAL ELSE 0 END) AS CRAMT
FROM OBDATA WHERE LOCCODE=@Loccode and GLCODE =@Glcode) S
WHERE #VOS.GLCODE = S.GLCODE AND #VOS.SLCODE = S.SLCODE
Not able to Update OPDR & OPCR
Error Message is
Invalid column name 'OPDR'.
Regards
Nirene Veshnav
View 1 Replies
View Related
Sep 6, 2006
Always wondered, now I have the time to ask - we currently backup ALLdatabases and these seem to all grow in size, the MSDB BAK files are now35mb each and growing!!! Can we remove these from our Enterprise Manager?- Master- Model- MSDBCheers, @sh
View 10 Replies
View Related
Feb 28, 2007
Hi allI am creating a web services application in Visual Studio Dot netwhich links to a MS SQL database.I need to create a form which lets the user pick his field ofchoice(doesnt matter what it is..) using drop down boxes,radio buttonsetc and query the database according to what he has picked andretrieve only those columns and rows.The thing is, I do not want to hardcode the queries usingOleDbDataAdapter or SqlDataAdapter, but want the query to be generatedon the fly, once the user picks his fields from the form.I'd greatly appreciate any help.Thanks,m
View 3 Replies
View Related
Nov 16, 2006
Pl tell me this senario
if we create new database in sql 2000 with size 1024 KB now we insert 500 KB data in that database. so what is actual size of database now?????????
View 3 Replies
View Related
Nov 3, 2006
Hi,
how we use syscolumns in Sql Server 2005 (Its not work in Sql Server 2005)
View 1 Replies
View Related