Hi,
I ran the following in the management studio:
CREATE ASSEMBLY MyCLRAssembly from 'c: empMyCLRAssembly.dll'
WITH PERMISSION_SET = SAFE
Go
For some reason I get the following error:
Msg 6517, Level 16, State 1, Line 1
Failed to create AppDomain 'AdventureWorks.dbo[ddl].22'.
I tried to google this error, but couldn't find it...
I would appreciate it if someone can tell me what I'm doing wrong.
Ohad.
We have written a test CRL stored procedure to test replacing one of our complex stored procedures but can€™t get it deployed to our SQL server that hosts a mirrored configuration of our production database (very locked down). It works fine on our development instances (not very locked down). It only references the default assemblies that were added when we created the project. All it does is use Context Connection=true to get data, loops though some records and returns the data using SQLContext. CLR is enabled on SQL server, the assembly is strongly signed, and we tried deploy using the binary string with the SAFE setting.
CREATE ASSEMBLY for assembly 'SQLCLRTest2' failed because assembly 'SQLCLRTest2' failed verification. Check if the referenced assemblies are up-to-date and trusted (for external_access or unsafe) to execute in the database. CLR Verifier error messages if any will follow this message
[ : SQLCLRTest2.StoredProcedures::GetLift][mdToken=0x600001e] Type load failed.
[token 0x02000008] Type load failed.
I am trying to deploy a Database Project with Visual Studio 2005 and SQL Server 2005 Standard.
I import €œSystem.IO€? and have therefore set the permission levels to EXTERNAL_ACCESS.
I am receiving the same error message that many folks have received.
CREATE ASSEMBLY for assembly 'Images' failed because assembly 'Images' is not authorized for PERMISSION_SET = EXTERNAL_ACCESS.
The assembly is authorized when either of the following is true: the database owner (DBO) has EXTERNAL ACCESS ASSEMBLY permission and the database has the TRUSTWORTHY database property on; or the assembly is signed with a certificate or an asymmetric key that has a corresponding login with EXTERNAL ACCESS ASSEMBLY permission. If you have restored or attached this database, make sure the database owner is mapped to the correct login on this server. If not, use sp_changedbowner to fix the problem. Images.
My CLR access is €œon€?
I have tried
1) From master run: GRANT EXTERNAL ACCESS ASSEMBLY to [BuiltinAdministrators].
2) From master run: GRANT EXTERNAL ACCESS ASSEMBLY to €œMy Windows Authentication ID€?.
3) Run ALTER DATABASE MYDATABASE SET TRUSTWORTHY ON
4) In Visual Studio .NET 2005 Set the permission levels to €˜external€™
5) Tried BuiltinAdministrators and my SQL Server Windows Authenticated Login ID for the ASSEMBLY OWNER.
I can compile BUT NOT DEPLOY
Any help would be greatly appreciated.
Regards Steve
I work with February CTP of SqlServer 2008.
I have an Assembly with several UDTs inside. Version of assembly is 1.0.*
I use CREATE ASSEMBLY statement to register this assembly, and it runs without any errors. Then I rebuild CLR solution without doing any changes in source code. In that case the only difference between new and old assemblies is version (difference in fourth part of version).
Then I try to update assembly in SqlServer. I use
ALTER ASSEMBLY <name>
FROM <path>
WITH PERMISSION_SET = UNSAFE, UNCHECKED DATA
statement for this. Statement runs with error:
Msg 6509An error occurred while gathering metadata from assembly €˜<Assembly name>€™ with HRESULT 0x1.
I found the list of condition for ALTER ASSEMBLY in MSDN:
ALTER ASSEMBLY statement cannot be used to change the following:
· The signatures of CLR functions, aggregate functions, stored procedures, and triggers in an instance of SQL Server that reference the assembly. ALTER ASSEMBLY fails when SQL Server cannot rebind .NET Framework database objects in SQL Server with the new version of the assembly.
· The signatures of methods in the assembly that are called from other assemblies.
· The list of assemblies that depend on the assembly, as referenced in the DependentList property of the assembly.
· The indexability of a method, unless there are no indexes or persisted computed columns depending on that method, either directly or indirectly.
· The FillRow method name attribute for CLR table-valued functions.
· The Accumulate and Terminate method signature for user-defined aggregates.
· System assemblies.
· Assembly ownership. Use ALTER AUTHORIZATION (Transact-SQL) instead.
Additionally, for assemblies that implement user-defined types, ALTER ASSEMBLY can be used for making only the following changes:
· Modifying public methods of the user-defined type class, as long as signatures or attributes are not changed.
· Adding new public methods.
· Modifying private methods in any way.
But I haven€™t done any changes in source code, so new version of assembly satisfies all this conditions.
What could be the reason for such behavior?
P.S. I€™ve got the same error, if I add or change any method in assembly before rebuilding.
Hello there,
i have the following problem.
I need to get some .dll's into MS SQL-Server 2005, that i need to get a own made .dll installed.
When i try to:
Code Block
CREATE ASSEMBLY SystemWeb
FROM 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727System.Web.dll'
WITH PERMISSION_SET = UNSAFE;
i get the following message:
Code Block
Warning: The Microsoft .Net frameworks assembly 'system.web, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=x86.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.enterpriseservices, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=x86.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.runtime.remoting, version=2.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.design, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Msg 701, Level 17, State 13, Line 1
There is insufficient system memory to run this query.
When i try to create one of the another assemblies ( system.enterpriseservices, system.runtime.remoting, system.design ) i get the same message.
I looked for this Error and found only this BUG-report:
BUG#: 58267 (SQLBUG_70)
Article ID: 274030
http://support.microsoft.com/kb/274030/en-us
But this does not solve my problem.
As far as i know we use MS SQL-Server 2005 without any Service-Packs.
Question:
is there any Table/View to find out the Versionnumber/Service-Pack
In the moment i am waiting for our admin to install SP2 for SQL-Server,
hoping that this will fix the problem.
Greetings
I am using this code to create dll : Execute.cs
using System;
using Microsoft.SqlServer.Dts.Runtime;
public class Execute
{
public static void Package(string dtsxPath)
{
try
{
Package pkg;
Application app;
DTSExecResult pkgResults;
app = new Application();
pkg = app.LoadPackage(dtsxPath, null);
pkgResults = pkg.Execute();
}
catch (System.Exception ex)
{
throw ex;
}
}
}
Then this
c:Program FilesMicrosoft Visual Studio 8VC>csc /target:library C:SSISSSISE
xecute.cs /reference:C:SSISSSISMicrosoft.SqlServer.ManagedDTS.dll
It creates Execute.dll
but when I run this is sql server
CREATE ASSEMBLY ssid from 'c:Program FilesMicrosoft Visual Studio 8VCExecute.dll'
WITH PERMISSION_SET = UNSAFE
I am getting Error
Warning: The SQL Server client assembly 'microsoft.sqlserver.manageddts, version=9.0.242.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The SQL Server client assembly 'microsoft.sqlserver.dtsruntimewrap, version=9.0.242.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Msg 10301, Level 16, State 1, Line 1
Assembly 'Execute' references assembly 'system.windows.forms, version=2.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089.', which is not present in the current database. SQL Server attempted to locate and automatically load the referenced assembly from the same location where referring assembly came from, but that operation has failed (reason: 2(The system cannot find the file specified.)). Please load the referenced assembly into the current database and retry your request.
I don't see any place I am using System.window.forms
Any idea why? Thanks - Ashok
---------------------------------------------------------
I changed my location to to CSC
C:WINNTMicrosoft.NETFrameworkv2.0.50727>
Now I get this error
Warning: The SQL Server client assembly 'microsoft.sqlserver.manageddts, version=9.0.242.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The SQL Server client assembly 'microsoft.sqlserver.dtsruntimewrap, version=9.0.242.0, culture=neutral, publickeytoken=89845dcd8080cc91, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.windows.forms, version=2.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.drawing, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'accessibility, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.runtime.serialization.formatters.soap, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Msg 10301, Level 16, State 1, Line 1
Assembly 'Execute1' references assembly 'microsoft.sqlserver.msxml6_interop, version=6.0.0.0, culture=neutral, publickeytoken=89845dcd8080cc91.', which is not present in the current database. SQL Server attempted to locate and automatically load the referenced assembly from the same location where referring assembly came from, but that operation has failed (reason: 2(The system cannot find the file specified.)). Please load the referenced assembly into the current database and retry your request.
---------------------------------------------
I managed to found this DLL Microsoft.SQLServer.msxml6_interop.dll so I copied to same location
Now It's looking for
microsoft.sqlserver.sqltdiagm - Which I am not able to find any place .......................
I ran the following:
CREATE ASSEMBLY A3rdPartyDLL
FROM 'C:Program Files3rdPartyComponents3rdParty.dll'
WITH PERMISSION_SET = EXTERNAL_ACCESS
and got the following error message:
Assembly 'A3rdPartyDLL' could not be installed because existing policy would keep it from being used.
How can I change the 'existing policy'?
When I run this ...
CREATE ASSEMBLY asmRANDRTCalendaringGateway FROM 'E:sqlRANDRTCalendaringGateway.dll' WITH PERMISSION_SET = UNSAFE
I get this error ...
Msg 10301, Level 16, State 1, Line 1
Assembly 'RANDRTCalendaringGateway' references assembly 'system.web, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a.', which is not present in the current database. SQL Server attempted to locate and automatically load the referenced assembly from the same location where referring assembly came from, but that operation has failed (reason: 2(The system cannot find the file specified.)). Please load the referenced assembly into the current database and retry your request.
Even though I do not explicity refer to system.web in the DLL's code ...
using Microsoft.Win32;
using System;
using System.Data.Sql;
using System.Data.SqlClient;
using System.Collections.Generic;
using System.Configuration;
using System.Text;
using log4net;
using ADODB;
using MAPI;
using CDO;
using System.Runtime.InteropServices;
Is the problem just staring me in the face ?
cheers
I was trying to understand how VS.NET2005 was deploying .NET CLR assemblies to SQL2005 so I ran a trace and found some interesting results.
VS.NET creates some SQL that looks pretty interesting:
CREATE ASSEMBLY [AssemblyNameHere]
FROM 0x4D5A90000300000004000000FFFF000......<continue binary data>
WITH PERMISSION_SET = EXTERNAL_ACCESS
Boy howdy!
I have tried to reproduce this and create my own deployment application but I cant figure out how they create this binary stream. The info in BOL is not much help and I have not found any samples anywhere on how to create this stream in c#.
Anyone out there been able to get this to work?
-Ben
Hi,
I want to create a text file and write to text it by calling its assembly from Stored Procedure. Full Detail is given below
I write a code in class to create a text file and write text in it.
1) I creat a class in Visual Basic.Net 2005, whose code is given below:
Imports System
Imports System.IO
Imports Microsoft.VisualBasic
Imports System.Diagnostics
Public Class WLog
Public Shared Sub LogToTextFile(ByVal LogName As String, ByVal newMessage As String)
Dim w As StreamWriter = File.AppendText(LogName)
LogIt(newMessage, w)
w.Close()
End Sub
Public Shared Sub LogIt(ByVal logMessage As String, ByVal wr As StreamWriter)
wr.Write(ControlChars.CrLf & "Log Entry:")
wr.WriteLine("(0) {1}", DateTime.Now.ToLongTimeString(), DateTime.Now.ToLongDateString())
wr.WriteLine(" :")
wr.WriteLine(" :{0}", logMessage)
wr.WriteLine("---------------------------")
wr.Flush()
End Sub
Public Shared Sub LotToEventLog(ByVal errorMessage As String)
Dim log As System.Diagnostics.EventLog = New System.Diagnostics.EventLog
log.Source = "My Application"
log.WriteEntry(errorMessage)
End Sub
End Class
2) Make & register its assembly, in SQL Server 2005.
3)Create Stored Procedure as given below:
CREATE PROCEDURE dbo.SP_LogTextFile
(
@LogName nvarchar(255), @NewMessage nvarchar(255)
)
AS EXTERNAL NAME
[asmLog].[WriteLog.WLog].[LogToTextFile]
4) When i execute this stored procedure as
Execute SP_LogTextFile 'C:Test.txt','Message1'
5) Then i got the following error
Msg 6522, Level 16, State 1, Procedure SP_LogTextFile, Line 0
A .NET Framework error occurred during execution of user defined routine or aggregate 'SP_LogTextFile':
System.UnauthorizedAccessException: Access to the path 'C:Test.txt' is denied.
System.UnauthorizedAccessException:
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, ileOptions options)
at System.IO.StreamWriter.CreateFile(String path, Boolean append)
at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize)
at System.IO.StreamWriter..ctor(String path, Boolean append)
at System.IO.File.AppendText(String path)
at WriteLog.WLog.LogToTextFile(String LogName, String newMessage)
Hi,
I have one ClassLibrary three member functions.I have the dll for this...Can some one please tell me how to create a Assembly in .NET.
I need to create a simple private assembly with the dll that i have.
Thanks
I'm using SQL Server Management Studio Express and am unable to create an assembly. The following code:
create assembly HelloWorld from 'c:HelloWorld.dll'
with permission_set = safe
returns the following error:
Msg 170, Level 15, State 1, Line 1
Line 1: Incorrect syntax near 'assembly'.
I noticed that the word "assembly" isn't in blue text and what's more, if I expand the programmability node on any database, there is no assembly node. Anybody know what I'm doing wrong here?
Thanks in advance.
I've got a project that requires J#. I know the J# assemblies aren't on the approved list, but I'm ok with that. I've done all the nasty things you're supposed to do to register it, and I've been succesful on my x86 machine. However, when I try the same thing on an x64 machine, it ends in failure. Here's the exact T-SQL I'm running:
IF NOT EXISTS (SELECT * FROM sys.assemblies asms WHERE asms.name = 'vjscor')
CREATE ASSEMBLY [vjscor]
FROM 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727vjscor.dll'
WITH PERMISSION_SET = UNSAFE
IF NOT EXISTS (SELECT * FROM sys.assemblies asms WHERE asms.name = 'vjslib')
CREATE ASSEMBLY [vjslib]
FROM 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727vjslib.dll'
WITH PERMISSION_SET = UNSAFE
As I said, this runs fine on SQL Server 2005 running on an x86 version of Windows.
When I run the same T-SQL on SQL Server 2005 on an x64 version of windows, I get this lovely error:
Assembly 'vjslib' references assembly 'vjscor, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a.', which is not present in the current database. SQL Server attempted to locate and automatically load the referenced assembly from the same location where referring assembly came from, but that operation has failed (reason: version, culture or public key mismatch). Please load the referenced assembly into the current database and retry your request.
As you can see, vjscore has indeed been registered. I can verify it by running SELECT * FROM sys.assemblies asms WHERE asms.name = 'vjscor'. So, why does vjslib not like the vjscor that has been registered, which just so happens to be the vjscor that's in the same directory as it is? And which happens to be one of only two vjscor.dll files on my entire computer (the other being the .NET 1.1 version).
Anyway, I'm totally stumped on this problem. Anyone have any ideas?
when I run ...
CREATE ASSEMBLY asm_stdole FROM 'E:sqlstdole.dll'
I get the error ...
Warning: The Microsoft .Net frameworks assembly 'stdole, version=7.0.3300.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a.' you are registering is not fully tested in SQL Server hosted environment.
Warning: Assembly "stdole" was built using version v1.0.3705 of the .NET Framework. SQL Server currently uses version v2.0.50727.
Msg 6215, Level 16, State 1, Line 1
CREATE ASSEMBLY failed because method 'Next' on type 'stdole.IEnumVARIANT' in safe assembly 'stdole' has invalid attribute 0x1003.
Hello,
i really need urgently help with my deploying my assembly to my database!!
can somebody tell me how can i get the authorization to deploy my assembly
as permission_set = External_access or Unsafe?
i allways get error messages when i try to deploy my assembly that way.
i tried it with strong key and i tried it with asymmetric key like this:
use master
go
create asymmetric key WebServiceKey from executable file = '...16082007.dll'
CREATE LOGIN WebServiceLogin FROM ASYMMETRIC KEY WebServiceKey
GRANT EXTERNAL ACCESS ASSEMBLY TO WebServiceLogin
GO
than i get the message:
The certificate, asymmetric key, or private key file does not exist or has invalid format.
thanks for every kind of help.
pamelia
I try to create assembly with UNSAFE permissions.
I granted "unsafe assembly" to my login, set TRUSTWORTHY property ON.
Now I have this error:
Could not obtain information about Windows NT group/user <MyDomain>/<MyName>, error code 0x5. (Microsoft SQL Server, Error: 15404).
How to resolve this?
Greetings...
I'm trying to create an "unsafe assembly":
USE master
GO
CREATE ASYMMETRIC KEY StoredProcedures_dll_Key
FROM EXECUTABLE FILE = 'C:Documents and SettingsAll UsersDocumentshunterStoredProcedures.dll';
CREATE LOGIN StoredProcedures_dll_Login
FROM ASYMMETRIC KEY StoredProcedures_dll_Key;
GRANT EXTERNAL ACCESS ASSEMBLY TO StoredProcedures_dll_Login;
GO
USE gfx_sa
GO
CREATE ASSEMBLY hunter_storedProcedures
FROM 'C:Documents and SettingsAll UsersDocumentshunterStoredProcedures.dll'
WITH PERMISSION_SET = UNSAFE;
GO
CREATE PROCEDURE [dbo].[hunter_storedProcedure1]
(
@symbol_id as int
)
AS EXTERNAL
NAME hunter_storedProcedures.StoredProcedures.StoredProcedure1
GO
But on 'CREATE ASSEMBLY" clause I'm getting error:
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
Msg 0, Level 20, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
Assembly is signed by Visual Studio.
What's wrong?
Best regards...
Does anyone know where I can download a C# CLI Assembly template?
In VS 2005 there are no defaults to create a C# SQL Assembly like the sample HelloWorld. Rather than modifying the Hello World, I'd like to get an original template for creating a new project just like the templates to create a new Windows project.
Thanks,
Chris
Hello ,
when I try to create an assembly on SQL2005
Create assembly LibSql
FROM 'c:SQLNETLIBSQLLIBSQL.dll'
WITH PERMISSION_SET = External_Access
I got the following error:
Failed to initialize the Common Language Runtime (CLR) v2.0.50727 with HRESULT 0x80131522. You need to restart SQL server to use CLR integration features.
Configuration:
Server: 8 processors with 16 GB RAM
select @@version returns:
Microsoft SQL Server 2005 - 9.00.2047.00 (Intel X86)
Apr 14 2006 01:12:25
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
AWE configuration is enabled.
CLR is enabled
Server was upgreaded from sql 2000 SP3a
Restart of Sql doesn't help
Thank you for your advice.
artek
I created a UDT Type (using MS Server Express Edition and Visual Basic 2005 express) but I get some errors:
Msg 6556, Level 16, State 1, Line 6
CREATE TYPE failed because it could not find type 'UDTProj' in assembly 'UDTProj'.
Msg 6597, Level 16, State 1, Line 6
CREATE TYPE failed.
That is my code:
Public Structure UDT_interval
Private adresse As String
Private beginn As Date
Private ende As Date
End Structure
************in Transact-SQL
//register the UDTProj assembly
USE TestData;
CREATE ASSEMBLY UDTProj
FROM 'C:MS Visual StudioMyOutputinReleaseUDTProj.dll '
WITH PERMISSION_SET = SAFE;
// create the UDTProj type
CREATE TYPE dbo.UDTProj
EXTERNAL NAME UDTProj.[UDTProj];
or
CREATE TYPE dbo.UDT_interval
EXTERNAL NAME UDTProj.[UDT_interval];
>Msg 6556, Level 16, State 1, Line 6
CREATE TYPE failed because it could not find type 'UDT_interval' in assembly 'UDTProj'.
Msg 6597, Level 16, State 1, Line 6
CREATE TYPE failed.
can anyone help me?
Regards.
D.M
When the CLR function executes "CREATE ASSEMBLY" the following error is thrown.
"Could not impersonate the client during assembly file operation."
The CLR function is invoked from Service Broker internal activation stored procedure.
"SELECT user_name()" returns dbo just before CREATE ASSEMBLY execution.
SqlContext.WindowsIdentity.Name is "NT AUTHORITYSYSTEM" as the Data Engine runs with the LocalSystem account.
How do I create a the necessary security context for "CREATE ASSEMBLY" to succeed ?
Service Broker Queue activation with EXECUTE AS = "SELF", "OWNER", domain account or dbo, all result in the above error. The Service Broker assembly having the internal activation stored procedure is registered "unsafe".
I am trying to create an assembly in SQL Server 2005 from a compiled VS 2005 solution in VB.net
I am getting the following error in SQL Server Management Studio:
Assembly 'PrintWorkOrder' references assembly 'crystaldecisions.crystalreports.engine, version=10.2.3600.0, culture=neutral, publickeytoken=692fbea5521e1304.', which is not present in the current database. SQL Server attempted to locate and automatically load the referenced assembly from the same location where referring assembly came from, but that operation has failed (reason: 2(The system cannot find the file specified.)). Please load the referenced assembly into the current database and retry your request.
Can someone explain to me how I can load the crystal assembly it is asking for?
(My SQL Server Instance is on a remote machinf from my Development Environment.)
Thanks.
Hi,
If i try to register System.dll for ComponentModel workspace using the following statement -
create assembly [system.ComponentModel]
from 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727system.dll'
with permission_set = safe
I get the following message -
Msg 6596, Level 16, State 1, Line 1
CREATE ASSEMBLY failed because assembly 'System' is a system assembly. Consider creating a user assembly to wrap desired functionality.
Can anyone please provide any pointers to implement the same.
Thanks in advance.
With regards,
I am new to the wonders of CLR and, as can be expected, have hit a snag. We have multiple environments to run this off of (dev, test, production, etc.) and need to be able to use the same scripts to install them. Here is our basic setup:
Batch script runs a master SQL file using sqlcmd utility
Master SQL file runs secondary SQL files, including the one with the CLR definitions
Secondary SQL file with CLR calls the CREATE ASSEMBSLYI want to be able to call
CREATE ASSEMBLY assemblyName FROM 'myAssembly.dll'
or
CREATE ASSEMBLY assemblyName FROM '..myAssembly.dll'
or something to the effect. However, when I try this, it says I cannot do it or it cannot find the file, even though the file is located in the same folder.
Any ideas?
I need to register a .Net assembly within the SQL 2005 eng because other assembies depend on it. That I need to use.
I get the following error message listed below, of the Assembly is depended on itself [ IE 'System.Web' need assembly 'System.Web' ] see the bold/unscore below...
Has any one solve this or can tell me what I'm doing incorrect?
The Jet
Here is the message stack:
Attempting to create the following assembly in SQL Server 2005:
CREATE ASSEMBLY [system.web] from 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727system.web.dll'
WITH PERMISSION_SET = UNSAFE
results in the following messages:
Warning: The Microsoft .Net frameworks assembly 'system.web, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=x86.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.directoryservices, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.directoryservices.protocols, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.enterpriseservices, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a, processorarchitecture=x86.' you are registering is not fully tested in SQL Server hosted environment.
Warning: The Microsoft .Net frameworks assembly 'system.runtime.remoting, version=2.0.0.0, culture=neutral, publickeytoken=b77a5c561934e089, processorarchitecture=msil.' you are registering is not fully tested in SQL Server hosted environment.
Msg 10300, Level 16, State 2, Line 1
Assembly 'System.Web' references assembly 'system.web, version=2.0.0.0, culture=neutral, publickeytoken=b03f5f7f11d50a3a.', which is not present in the current database. SQL Server attempted to locate and automatically load the referenced assembly from the same location where referring assembly came from, but that operation has failed (reason: version, culture or public key mismatch). Please load the referenced assembly into the current database and retry your request.
Hi,
View 12 Replies View RelatedHi
I use SQL code snippet to attach the CLR assembly (dll) to the SQL Server Express
CREATE ASSEMBLY [DatabaseAndImages]
AUTHORIZATION [dbo]
FROM 'C:CLR_File.dll'
WITH PERMISSION_SET = SAFE
That file content CRL Codes for 10 Stored Procedures & 3 UDT & 5 Functions & 6 Triggers
As you can see it's content large amount of DB objects !!
My Question is ..
Is there any simple way can I use it to extract or automatic create all that Objects in the Database without use separate SQL Statement for each one ??
By Example , I will use this SQL statement to create the sp_AddImage that already located inside the CLR dll file
CREATE PROCEDURE [dbo].[sp_AddImage]
@ImageID [uniqueidentifier],
@ImageFileName [nvarchar](max),
@Image [varbinary](max)
WITH EXECUTE AS CALLER
AS
EXTERNAL NAME [DatabaseAndImages].[StoredProcedures].[sp_AddImage]
But as you know .. I have many objects .. and I am in development phase and I will do change to that object many time and also may I will add much more €¦
I thing it's not good to write SQL Statement for each object and do changes every time when I change the object definition
Is there any one line of SQL statement can I use it to automatically create and extract all the objects inside the assembly ??
Or is there any way to do that Issue by simple operation ??
And thanks with my best regarding
Fraas
I'm working on a CLR Stored Procedure and have code that builds using
Namespace: Microsoft.SqlServer.Dts.Runtime
Assembly: Microsoft.SqlServer.ManagedDTS (in microsoft.sqlserver.manageddts.dll)
When i try to create the assembly i get this:
CREATE ASSEMBLY failed because method 'UpdateVersion' on type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSPackageVersionUpdate90' in safe assembly 'Microsoft.SqlServer.DTSRuntimeWrap' has invalid attribute 0x1003.
Hi All,
I am trying to create and assembly which saves the results of a XML query.
The dll, when called from a exe, works and saves the results to file as expected.
However, when trying to create the assembly I get the error:
"
Msg 6215, Level 16, State 1, Line 2
CREATE ASSEMBLY failed because method 'get_Count' on type 'ADODB._Collection' in external_access assembly 'Interop.ADODB' has invalid attribute 0x1003."
Any ideas?
Cheers,
Crispin
I am developing an application in .Net but I need to access to some procedures in ASP.Net since SQL Server.
I have got it but i have problems to assembly the dll if it has dependencies of another dll's.I have read that if a dll need other dll it call it automatically but when I try to assembly my class in .NET there is the next error:
Create failed for SqlAssembly 'ClaseEjemplo'.
Assembly 'csyt.dal, version=0.0.0.0, culture=neutral, publickeytoken=null.' was not found in the SQL catalog. (.Net SqlClient Data Provider)
Nevertheless if I the class hasn't another dependencies it works.The class I am trying to assembly is ClaseEjemplo.If I try to use the procedure of other class "'csyt.dal" I have problems.If ClaseEjemplo hasn't dependencies it works perfectly!
My class ClaseEjemplo is:
using System;
using System.Collections.Generic;
using System.Text;
using Csyt.DAL;
using Csyt.Info;
namespace ClaseEjemplo
{
public class Class1
{
public static long devolucion()
{
AIAlarmaDB.TipoCondicion aux1 = new AIAlarmaDB.TipoCondicion();
AIAlarmaDB aux = new AIAlarmaDB();
aux1=aux.GetTipoCondicionById(1);
return aux1.Id;
}
}
}
Thanks in advance
I have been reading up on everything I can find on this subject and I am not clear if this is allowed within the SQL Server 2005 CLR. My function calls work within a Windows form project, but don't run when invoked from a SQL function. I don't get any errors or warnings when creating the assembly and functions within SQL Server, but when running via a select statement, the spid just hangs and I have to stop & restart the service to kill the process. I have been investigating the security settings for this assembly, but I think I have that covered via the RunTime Security Policy settings in the .NET Framework 2.0 Configuration tool.
Any insights, knowledge, or thoughts would be greatly appreciated.
Barry
Hiiiiiiii all
I have to make a user defined function in c# as the class liberary and create a dll file, now i want to use this function in SQL Server 2005 as a part of CLR Integration
I have tried like this
CREATE ASSEMBLY abc
FROM 'C:abc.dll'
WITH PERMISSION_SET = SAFE
but it gives me
incorrect syntax error
so plzzzzz anyone help me wht to do in my probbbbbbbbb???????
Pratik Kansara
CREATE ASSEMBLY ClrSql from 'C:ClrSql.dll' WITH PERMISSION_SET = EXTERNAL_ACCESS
gives me this . . .
Msg 10327, Level 14, State 1, Line 1
CREATE ASSEMBLY for assembly 'ClrSql' failed because assembly 'ClrSql' is not authorized for PERMISSION_SET = EXTERNAL_ACCESS. The assembly is authorized when either of the following is true: the database owner (DBO) has EXTERNAL ACCESS ASSEMBLY permission and the database has the TRUSTWORTHY database property on; or the assembly is signed with a certificate or an asymmetric key that has a corresponding login with EXTERNAL ACCESS ASSEMBLY permission.
How do I allow EXTERNAL_ACCESS and UNSAFE permissions? The property appears grayed out, and I am the dbo.