Error With C# Select Statement

Jul 3, 2007

hi i have copied this from my other page where it works fine and i cant understand what is going wrong! maybe one of your guys can point out what i cant see! herei s my code

string strOrderID = Request.QueryString["orderID"].ToString();int intOrderID = Convert.ToInt32(strOrderID);

int intCustID = Convert.ToInt32(Request.QueryString["qsnOrderCustID"].ToString());lblCustomerID.Text = Request.QueryString["qsnOrderCustID"].ToString();lblOrderID.Text = Request.QueryString["orderID"].ToString();

 

SqlConnection myConn = new SqlConnection("Data Source=xxxx;Initial Catalog=xxxx;User ID=xxxx;Password=xxxx");

//This is the sql statement.string sql = "SELECT [del_address], [del_post_code], [del_time] From tbl_del WHERE order_ID = " + intOrderID;

 

//This creates a sql command which executes the sql statement.SqlCommand sqlCmd = new SqlCommand(sql, myConn);

myConn.Open();SqlDataReader dr = sqlCmd.ExecuteReader();

//This reads the first result from the sqlReader

dr.Read();

try

{

 lblDelTime.Text = Convert.ToString(dr["del_time"].ToString);

lblDelAddy.Text = dr["del_address"].ToString();lblDelPCode.Text = dr["del_post_code"].ToString();if (lblDelAddy.Text != "")

{

lblDelDate.Visible = true;lblDelTime.Visible = true;

Label1.Visible = true;Label2.Visible = true;

}

}catch (Exception except)

{lblerror.Text = Convert.ToString(except);

}

 

Regards

Jez

View 3 Replies


ADVERTISEMENT

Select Statement Error

Jul 13, 2007

             Receive Error:  when I Run Select Statement  Asking to Declare @Country
            Not sure how to Declare the variable '@Country'. Any help would be appreciated... Thank You.
 Here is the Code:
 ____________________________________________________________________________________________________________
 Private  Sub Page_Load(ByVal sender As Object, ByVal e As EventArgs)
                   If Not IsPostBack Then
                          Dim conCommerce As SqlConnection                          Dim cmdSelect As SqlCommand                          Dim CategoriesCounter As SqlDataReader                          Dim StylesSource As SqlDataReader
                          conCommerce = New SqlConnection(ConfigurationSettings.AppSettings("ConnectionString"))
                          conCommerce.Open()
                         cmdSelect = New SqlCommand("Select CountrySubCatCount FROM StylesSource WHere Country = @Country", conCommerce)
                         StylesSource = cmdSelect.ExecuteReader()
                         txtCounter1.DataSource = StylesSource                         txtCounter1.DataTextField = "Country"
                         txtCounter1.DataBind()
                         StylesSource.Close()                         conCommerce.Close()
                    End If
______________________________________________________________________________ 
Error Message:
Must declare the variable '@Country'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Must declare the variable '@Country'.
Source Error:
Line 220:                                                                 cmdSelect = New SqlCommand("Select CountrySubCatCount FROM StylesSource WHere Country = @Country", conCommerce)Line 221:Line 222:                                                                          StylesSource = cmdSelect.ExecuteReader()Line 223:Line 224:
 
 
 

View 2 Replies View Related

Select Statement Error

Apr 24, 2008

In SQL Sever 2005, I am trying to retrieve data using this simple query from a table called 'User':

select *
from dbo.User
where UserID='sam'


And, I keep getting the following error:
Msg 156, Level 15, State 1, Line 2
Incorrect syntax near the keyword 'User'.

Thank you for your help

View 1 Replies View Related

SQL Select Statement Error

Jul 20, 2005

Please help me debug this statement:Select vVehRegNAddr.RegContChar1 From (((vVeh LEFT OUTER JOINvVehBrand ON vVeh.Plate = vVehBrand.Plate) LEFT OUTER JOINvVehRegNAddr ON vVeh.Plate = vVehRegNAddr.Plate) LEFT OUTER JOINvVehLegal ON vVeh.Plate = vVehLegal.Plate) Where ((vVeh.Active = 1)AND (vVeh.VUse NOT IN ('C/G','H/D','SNO','SNX')) AND (vVeh.LExpDt ='20050715'))ERROR MESSAGE:"Error in selection of Aggregates:If ANY aggregate functions(Count, Sum,...) are chosen,All fields mustbe aggregate that are not in Grouping"

View 2 Replies View Related

Sub Select Statement Error.. Plizz Help.. :)

Nov 2, 2006

Hi,I try to insert record using select statement. But, I am having a problem with this code:Insert into PaymentVoucherTable (ID, Duration1, min1, Total1, Duration2, min2, Total2)select (ID, Duration1, min1, (Duration1 * min1), (select Duration2,min2,(Duration2 * min2) from Table2)from Table1The MSSQL keep displaying error message : "the number of column in INSERT statement is not the same as the select statement...".Is my subselect statement structure correct ???Thanks...  

View 2 Replies View Related

HELPPP SQL Select Statement Pissing Me Off, Error, But Why.....

Apr 2, 2004

grr.
I have two different select statements that are giving me the same error.. and its getting irritating cause i cant figure out why...

the error IS --tada--

------------------------------------------
ADODB.Recordset error '800a0bb9'

Arguments are of the wrong type, are out of acceptable range, or are in conflict with one another.

/vendorlist.asp, line 68
-----------------------------------------
Here's the statement.. and ill point out line 68 below with a few other details...
-----------------------------------------
Dim vendorRS, SQL
set vendorRS = Server.CreateObject("ADODB.Recordset")
SQL = "SELECT ttVendors.company, ttVendors.website, ttVendors.phone, ttVendors.phone800,ttVendors.vendorID," &_
SQL = SQL & "ttInventory.newprice, ttInventory.refurbprice, ttInventory.oosprice, ttInventory.venddescrip" &_
SQL = SQL & "FROM ttVendors INNER JOIN ttInventory on ttVendors.vendorID = ttInventory.vendorID" &_
SQL = SQL & "WHERE ttInventory.prodID = '" &prodID& "'"

vendorRS.Open SQL ,objCn, 1, 3

DIM company
company = vendorRs("company")
vendorRs.close
set vendorRs = nothing
---------------------------------------------
Ok so... line 68 IS
vendorRS.Open SQL ,objCn, 1, 3

ive tried it like
vendorRS.Open = SQL ,objCn, 1, 3
vendorRS.Open, SQL ,objCn, 1, 3
vendorRS.Open SQL ,objCn, 3, 3

no luck..
Also, prodID is passed from a querystring from previous page.. just used the typical request object to gather.. in the DB, all prodID fields are of INT type.. and im wondering if that makes a difference..

any ideas.. or blanks i can fill it?

View 1 Replies View Related

Select Statement Computed Column Error

Feb 10, 2015

I am receiving error msg on the below query line as "incorrect syntax near MSF" , "Incoorect syntanx near ExtCost", "incorrect syntax near From on line 28"

SELECT
xxxcolumns,
(rj.RECEIVEDLINEAL * ((r.WIDTH / 12.0)) / 1000.0 MSF,
Case
when rv.PricePerCode = 'MSF' Then
((rj.RECEIVEDLINEAL * (r.WIDTH / 12.0)) / 1000.0) * rv.price

[Code] ....

View 1 Replies View Related

SELECT @@IDENTITY During INSERT STATEMENT Error

Mar 9, 2008

The following SQL statement fails on SQL CE 3.5 but works on SQL Express 2005:


"INSERT INTO BOOKINGS VALUES(@now,'"+note+"'," + p + "); SELECT @@IDENTITY;"

Compact 3.5 doesnt like the SELECT statement claiming that:

There was an error parsing the query. [ Token line number = 1,Token line offset = 72,Token in error = SELECT ]


Can anyone suggest the correct SQL to implement this via Compact? i.e. How do I retrieve the Identity value during and insert statement?

I have removed the SELECT @@IDENTITY; portion of the statement and it runs fine.

View 9 Replies View Related

SQL 2012 :: Select Permission Error On Insert Statement

Jul 28, 2015

Have run to a select permission error when attempting insert data to a table. received the following error

Msg 229, Level 14, State 5, Line 11
The SELECT permission was denied on the object 'tableName', database 'DBname', schema 'Schema'.

Few things to note
- There are no triggers depending on the table
- Permissions are granted at a roll level which is rolled down to the login
- The test environments have the same level of permission which works fine.

View 6 Replies View Related

Select Statement Within Select Statement Makes My Query Slow....

Sep 3, 2007

Hello... im having a problem with my query optimization....

I have a query that looks like this:


SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)


it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...

View 3 Replies View Related

SQL Server 2008 :: Incorrect Prefix Error (select Count Statement)

Oct 7, 2015

Naming convention and what am I doing wrong here:

,(Select Count(C2.AppID) From Channels c left join Applications a on c.ChannelID = a.SourceID left join Contracts2 c2 on a.AppID = c2.AppID Where Channels.ChannelID = c.ChannelID and c2.DateContractFunded > (Select dateadd(yy,-1,DATEADD(yy, DATEDIFF(yy,0,getdate() ), 0))) and c2.DateContractFunded < (Select dateadd(ms,-3,DATEADD(yy, DATEDIFF(yy,0,getdate() ), 0))) ) As FundedLastYear
FROM Channels AS C
INNER JOIN ChannelContacts AS CC ON C.ChannelID = CC.ChannelID
INNER JOIN ChannelProductPlan AS CPP ON C.ChannelID = CPP.ChannelID
INNER JOIN tblLuMktReps AS MR ON C.MarketRepID = MR.MarketRepID
INNER JOIN tblLuHoldingCo AS HC ON C.HoldingCoID = HC.HoldingCoIDError message:

Msg 107, Level 16, State 3, Line 1
The column prefix 'Channels' does not match with a table name or alias name used in the query.

View 9 Replies View Related

Multiple Tables Used In Select Statement Makes My Update Statement Not Work?

Aug 29, 2006

I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly.  My problem is that the table I am pulling data from is mainly foreign keys.  So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys.  I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit.  I run the "test query" and everything I need shows up as I want it.  I then go back to the gridview and change the fields which are foreign keys to templates.  When I edit the templates I bind the field that contains the string value of the given foreign key to the template.  This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value.  So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors.  I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode.  I make my changes and then select "update."  When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing.  The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work.  When I remove all of my JOIN's and go back to foreign keys and one table the update works again.  Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People].  My WHERE is based on a control that I use to select a person from a drop down list.  If I run the test query for the update while setting up my data source the query will update the record in the database.  It is when I try to make the update from the gridview that the data is not changed.  If anything is not clear please let me know and I will clarify as much as I can.  This is my first project using ASP and working with databases so I am completely learning as I go.  I took some database courses in college but I have never interacted with them with a web based front end.  Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian 

View 5 Replies View Related

SQL Server 2012 :: Create Dynamic Update Statement Based On Return Values In Select Statement

Jan 9, 2015

Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".

Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.

View 4 Replies View Related

Using Conditional Statement In Stored Prcodure To Build Select Statement

Jul 20, 2005

hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if

View 2 Replies View Related

TSQL - Use ORDER BY Statement Without Insertin The Field Name Into The SELECT Statement

Oct 29, 2007

Hi guys,
I have the query below (running okay):



Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01

The results are just as I need:


Field01 Field02

------------- ----------------------

192473 8461760

192474 22810



Because other reasons. I need to modify that query to:



Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:

Field02

----------------------

22810
8461760

And what I need is (without showing any other field):

Field02

----------------------

8461760
22810


Is there any good suggestion?
Thanks in advance for any help,
Aldo.

View 3 Replies View Related

How To Write Select Statement Inside CASE Statement ?

Jul 4, 2006

Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?

following part of the procedure clears my requirement.

SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E

can any one help me in this?
please give me a sample query.

Thanks and Regards,
Kiran Suthar

View 7 Replies View Related

Transact SQL :: Update Statement In Select Case Statement

May 5, 2015

I am attempting to run update statements within a SELECT CASE statement.

Select case x.field
WHEN 'XXX' THEN
  UPDATE TABLE1
   SET TABLE1.FIELD2 = 1
  ELSE
   UPDATE TABLE2
   SET TABLE2.FIELD1 = 2
END
FROM OuterTable x

I get incorrect syntax near the keyword 'update'.

View 7 Replies View Related

How To Use Select Statement Inside Insert Statement

Oct 20, 2014

In the below code i want to use select statement for getting customer

address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname

from customer table.Rest of the things will be as it is in the following code.How do i do this?

INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,

[code]....

View 1 Replies View Related

Help With Delete Statement/converting This Select Statement.

Aug 10, 2006

I have 3 tables, with this relation:
tblChats.WebsiteID = tblWebsite.ID
tblWebsite.AccountID = tblAccount.ID

I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:

SELECT * FROM tblChats c
LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID
LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID
WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180

View 1 Replies View Related

Select Statement Problem - Group By Maybe Nested Select?

Sep 17, 2007

Hey guys i have a stock table and a stock type table and what i would like to do is say for every different piece of stock find out how many are available The two tables are like thisstockIDconsumableIDstockAvailableconsumableIDconsumableName So i want to,Select every consumableName in my table and then group all the stock by the consumable ID with some form of total where stockavailable = 1I should then end up with a table like thisEpson T001 - Available 6Epson T002 - Available 0Epson T003 - Available 4If anyone can help me i would be very appreciative. If you want excact table names etc then i can put that here but for now i thought i would ask how you would do it and then give it a go myself.ThanksMatt 

View 2 Replies View Related

SQL Select Statement To Select The Last Ten Records Posted

Aug 6, 2007

SELECT Top 10    Name, Contact AS DCC, DateAdded AS DateTimeFROM         NameTaORDER BY DateAdded DESC
I'm trying to right a sql statement for a gridview, I want to see the last ten records added to the to the database.  As you know each day someone could add one or two records, how can I write it show the last 10 records entered.

View 2 Replies View Related

Using Select Statement Result In If Statement Please Help

Jul 11, 2007

Hello
How can i say this I would like my if statement to say:  if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement.
<% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>"
ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)">
<SelectParameters>
<asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" />
</SelectParameters>
</asp:SqlDataSource>any help would be appreciated

View 2 Replies View Related

If STATEMENT Within Select Statement Syntax

May 15, 2008

Hi,

I am a newbie to this site and hope someone can help....

I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is:

if(TL_flag= '1', "yes") as [Trial Leave]

it is coming up with an error.... I can use Select case but I should not need to as this should work?

Any ideas?

View 2 Replies View Related

Can I Use SELECT Statement To Select First 100 Record????

Apr 21, 1999

I would like to exec a select statement in VB/C++ to return first 100 records? What is the SQL statement should be?

Thanks,

Sam

View 1 Replies View Related

Select Statement With Count Within Another Select

Aug 23, 2013

I am using three tables in this query, one is events_detail, one is events_summary, the third if gifts. The original select statement counted the number of ids (event_details.id_number) that appear per event_name (event_summary.event_name).

Now, I would like to add in another column that counts the number of IDs that gave a gift who attended an event that were also listed in the event_ details table. So far I have come up with the following. My main issue is linking the subquery properly back to the main query. how to count in the sub-query and have the result placed within the groups results in the main query.

SELECT es.event_name, es.event_id, COUNT(ed.id_number) Number_Attendees,
(
SELECT COUNT(gifts.donor_id) AS Count2
FROM gifts
WHERE gifts.donor_id = ed.id_number
) subquery2

[code]....

View 1 Replies View Related

SQL Server 2012 :: Select Statement That Take Upper Table And Select Lower Table

Jul 31, 2014

I need to write a select statement that take the upper table and select the lower table.

View 3 Replies View Related

Case Statement Error In An Insert Statement

May 26, 2006

Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.

Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);

The error I'm getting is:
Incorrect syntax near '='.

I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.

View 10 Replies View Related

Using IF...Else Statement SELECT Statement

Sep 7, 2006

 

Hi All,

Can some one point me in the right direction in how to construct my SQL query within my cursor?

I Have got a cursor which i am using to iterate through a table, What i am trying to do is in my statement(used to open the cursor) is compare 2 tables (the one which my cursor is iterating) to see if there is a matching row in the other table (using  both tables ID's Like So:

SELECT column_List
FROM Table1
WHERE Table1_id = Table2_id  


 so for each row  my cursor checks if there is a corresponding match in  table2... but i would like to write to an error log

and do other statements if there is no match

 how do i add this condition to my statement either using an if...else statement proceeding to the next row?

here is the statment i attempted to write:

SELECT column_List
FROM table1
WHERE
 Table1_id = Table2.id

now i want to incoporate the statements below into the statement above as a condition when table1.id <> table2.id    


IF  table1.id <> table2.id    

BEGIN
   SET @DebugMessage = 'data not live.'
   RAISERROR (@DebugMessage, 16, 1) WITH LOG
  END

essentially what i am trying to sayin my statement is:

 go to the first row

check if it has a match in table 2,

 if there is no match execute a number of statements such as error loging e.t.c

go to the next row

 repeat the previous statements 

 

...i also looked through some Case...When statements am just not sure how to put in the condition

thanks in advance

 

View 1 Replies View Related

SQL SELECT Statement

Jul 5, 2006

I am a newbie to SQL.  I have a table (AenComponent) with three columns (State1, State2, State3).  Each column has a set of numeric values.  I would like to get a number count from all of the rows that contain the value of 1, no matter which column they are in.
 
I have tried
SELECT     COUNT(*) AS Expr1FROM        AenComponentWHERE     (State1 = 1) OR (State2 = 1) OR (State3 = 1)
but it does not give me an accurate count.  Any help would be appreciated.
 
thanks
rusty
 

View 4 Replies View Related

Need Help With Select Statement

Dec 29, 2006

I'm trying to get a list of clients and their sum of total pmts, their pmt level, and pmt level description by date range.
Here is what I’ve tried and it will not work. I need to do this without using temp tables.
SELECT C.ClientID, SUM(P.AmountPaid) AS SumOfpmts, tblpmtLevels.pmtLevel, tblpmtLevels.DescriptionFROM         tblPmts AS PL INNER JOIN                      tblPmtReceipts AS P ON PL.PmtID = P.PmtID INNER JOIN                      tblClients AS C ON PL.ClientID = C.ClientID INNER JOIN                      tblPmtLevels ON SUM(P.AmountPaid) >= tblPmtLevels.PmtLevelLow AND SUM(P.AmountPaid) <= tblPmtLevels.PmtLevelHighWHERE     (P.PaymentDate BETWEEN @Start AND @End)GROUP BY C.ClientID
Please provide any help you can, 

View 4 Replies View Related

SQL SELECT Statement

Mar 13, 2007

Hello, Is there a SQL SELECT Statement that can remove the time part in my DataTable. see example below
This is what I have in the first column 0 -   MM/dd/yyyy 12:00:00 AM
This is what I want   -   MM/dd/yyyy
I would rather do it in the SELECT statement instead of doing it in my DataTable using the FORMAT function.
Thanks
Steve

View 5 Replies View Related

Using An SP In A Select Statement

Apr 18, 2007

I have a stored procedure that works like this
getCountryByIPAddress @ipaddr='1.2.3.4'
returns a single 2 char column.
I want to use it in a select statement similar to:
select customername, @country=(exec getCountry @ipaddr=customer.customeripaddress) from customer
I'm intend to receive a list of customer names and the 2 char result of GetCountry based on the customeripaddress field of the customer table.  What I get is a syntax error near Exec and then another one near '.'
Is there another way to accomplish this that I am not seeing?
Ryan
 

View 6 Replies View Related

Select Statement Help

May 29, 2007

Hi,
I am trying to select only the most recent record added to a table per user.  Say the table has a userid, date, and a color and may look like this:
2 5/06/07 red
8 5/3/07 grey
2 5/13/07 green
4 4/30/07 orange
8 4/26/07 yellow
And I want, in any order:
2 5/13/07 green
8 5/3/07 grey
4 4/30/07 orange
 
Thanks for any help.
Greg

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved