Essbase And Integration Services

Apr 24, 2007

is it possible to use integration services to extract data from essbase?

View 3 Replies


ADVERTISEMENT

SSIS And Hyperion ESSBASE ...

Apr 24, 2008

Can SSIS connect and pull data from an OLAP database hosted by Hyperion's Essbase V 6.X or V7.X? We have a manual process of pulling in stuff and would like to replace this with an automated process. Appreciate any help.

View 3 Replies View Related

How To Optimize Integration Pacakages Or Best Practices For Integration Services

Sep 11, 2007

Hello friends.
I managed to design an Integration service package,but the desired level of performance has not been achieved(i.e it is performing slow).
So I want to know what are the best practices for optimized solution .
In my package I'm exreacting data from XML file and Storing it in SQL server database with some processing dring data flow.

I'm using
1) Two Script Task Control -In these control,I m opening the connection to XML file through VB.net code and
iterating each record at a time.
2)Two OLE DB Command -Each fetched record from script task component is processed in OLEDB command through
stored procedure and then inseted into database.
3)One for Loop -This loop contains two script Task control and two OLEDB Command control,
(mentioned above),for fetching single record and inserting it in database.
4)One derived Column
5)One Multicast
6)One Character Map
7)One OlEDB Source

As with my current performance I'm able to insert one record in every .5 second (Which is much below to acceptable limits)
Is control lying disabled on SSIS designer pane also affect the performance of execution.

View 4 Replies View Related

DashBoard Solution For Hyperion Essbase 7.1.2.

Apr 29, 2008

My company is looking to implement a dashboard solution for Hyperion Essbase 7.1.2. The inclination is towards using Micrsofts BI for doing the same. However we are in admist of deciding on which MS BI products(SSAS or SSRS or SSIS) supports the Essbase 7.1.2 version in terms of connectivity and performance. I know SSRS supports Hyperion system 9BI+ but not sure about the backward compatibility.I would greatly appreciate if GURUS could shed some light into this.

Thank you

View 2 Replies View Related

Dashboard Solution For Hyperion Essbase 7.1.2

Apr 29, 2008

My company is looking to implement a dashboard solution for Hyperion Essbase 7.1.2. The inclination is towards using Micrsofts BI for doing the same. However we are in admist of deciding on which MS BI products(SSAS or SSRS or SSIS) supports the Essbase 7.1.2 version in terms of connectivity and performance. I would greatly appreciate if GURUS could shed some light into this.
Thank you

View 4 Replies View Related

Refreshing Data In Hyperion Essbase Cubes

Jul 11, 2006

Hi all,

Normally I would be using SSAS but our finance department make use of Hyperion Essbase. I was wondering whether it was possible to upload data into an Essbase cube using SSIS in the same way that you can use the Analysis Services processing task? I realise there are no specific task for Essbase, but are there any suggestions about what would be the best way of going about this?

regards

 

Colin

View 4 Replies View Related

SQL 2005 SP2 Reporting Services And Window SharePoint Services V3 Integration Config Issue

Mar 23, 2007

Hi,
I have just install SQL 2005 SP2 and trying to get Window SharePoint Services V3 integrated with SQL 2005 SP2 reporting services.
In SharePoint Central Administration, I select the Reporting Services Integration page and have setup the Report Server Web Service URL and Authentication Mode. I then goto Grant database access, specify the SQL server name, get promted for a username and password that has access SQL Reportserver and get the following error "The group name could not be found"
Does anyone have any ideas?
Thanks

View 5 Replies View Related

Analysis Services 2005 Database Processing Fails When Run From Integration Services

Oct 11, 2007

Hello, I have a problem when trying to fully process an SSAS database using Integration Services "Analysis Services Processing Task" task. I have 2 of these tasks which are responsible for processing the Dimensions then the Cubes. When I run the package either via the BIDS environment or on the local server from the Integration Services engine, I will get an error after about 20 minutes stating:

"Error: Memory Error: Allocation failure. Not enough storage is available to process this command""Error: Errors in the metadata manager. An error occurred when loading the <cube name> cube from the file \?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataMyWarehouse<cube file>.xml"

The cube name is not specific, it will fail and any of my cubes could be in the error log

If I fully process the AS database using the AS engine (logon to local AS server, right-click AS database and click Process), I get no errors at all, it processes and completes fine. The processing options are identical when I run in AS or via the SSIS "Analysis Services Processing Task" task.

I've searched quite a lot online but no joy, the information I have gleaned from various sites does not directly link SSIS with SSAS processing problems.

When either the AS processing starts via SSAS or SSIS the memory usage of MSMDSRV.exe increases to around 1.4 / 1.5 GB but never goes to 2GB ever, even when the error appears.

I've done the following with no effect.

" Have run via AS and works fine
" No specific cube it fails on
" Have created a Dimension only package, same problem
" Changed the maxmemorylimit
" Changed the connections to localhost
" Memory DOES NOT max out on server

Server Specs:
Windows Server 2003 Standard + Service Pack 2
4GM ram, 2GB paging file

SQL Server 2005 + Service Pack 2


Can anyone help?

Andy

View 2 Replies View Related

DataSource: Hyperion Essbase Cube, Error Occurred Retrieving Child Nodes: Null

Oct 19, 2007



I have a custom essbase application/db source that I wish to connect to from SSRS 2005. I have all the required software installed (APS / SP2 .3050) etc.

I can connect to the datasource in SSRS 2005, but when I'm trying to build the query on the cube, I see under the member properties of all dimensions, the following piece of line
"error occurred retrieving child nodes: null"


Also, when I try to drag my Measures into the query section (or any other dimension for that matter of fact, though that defies logic) I get the following error

Cannot perform cube view operation. OLAP error (1260046): Unknown Member PARENT_UNIQUE_NAME used in query

I am new to using ESSBASE with SSRS 2005, and hence cannot make much sense of the above two errors.
Any insight or a re-direction to similar posts with solutions will be greatly appreciated.

thanks for your time,
!!

View 3 Replies View Related

Integration Services Notification Services

Apr 18, 2007

Does anybody know of a notification services using SSIS? Is it SendMail or otherwise? Is there a step-by-step practice on how to create one?

View 19 Replies View Related

Integration Services

May 24, 2007

Is there a way to give customers access to SSIS? They need to be able to create their own SSIS packages. Of course we have more then one customer so it would be nice to have modular security in place where they don't get to see customers abc and customer xyz packages. Only their own.
 
thanks!

View 6 Replies View Related

Help With Integration Services !!!

May 8, 2008

Hi All,

I have created an integration services project (attached is a screenshot) that workes against the flat file (.DAT extension) and it does some manipluation in the data and then load it into the table. Everything works fine.
Now I want to get the name of my flat file source fille (which is a .DAT file) and then insert it in the table.
I am running th integration services against different .DAT files (only one file at one time) which are located on different locations.....so what I want is that, whenever I run the package it do the usuall processing and then while loading the data in to the destination table, it also load the name of the file into the destination table (lets called a field "FileName" of nvarchar type in the table "Comphistory")

How can I achieve this?

I am looking for a quick and easy help.

Thanks,

Zee

View 4 Replies View Related

BUG In Integration Services

Jul 25, 2007

Problem
When you have a SSIS package that contains a connection from a data source, this connection is not updated when the data source changes based on a configuration change.

Situation :
A SSIS solution contains 3 configurations : Development, Test, Production. You can create those configurations in configuration manager of the solution.

The SSIS project contains one Data source. It doesn't really matter what type but I take SQL Server. The database server in development is SQL_DEV, in test is SQL_TEST and in production is SQL_PROD. Initially they are for all configurations the same. You can specify those values by changing the active configuration and then editing the Data source.

In the SSIS package (DTSX), you can create a connection manager based on a Data source.
If you change the Data source, the connection manager is also changed. If you change the Data source by changing the active configuration, the connection manager is not being updated.

If you think this isn't a big issue think big. We have 4 configuration, 10 shared Data sources and 25 DTSX packages. That would give a maximum of 1000 settings (4 x 10 x 25). Using this method it can be reduced to 40 (4 x 10). Of course this is a theoretical but it is very common to have the destination data source re-used on all packages, which still would be 100 settings (4 x 25)


Steps to reproduce
- create a new SSIS project
- In the solution explorer, create a new Data source named TestSource.
- In the connection managers window of Package.dtsx, create a new connection from a Data source.
- Make some changes in to TestSource.ds under the Data Sources. For example change the server or the database.
- Verify that those changes are also in the package.

- in the solution explorer, right click the solution and select configuration manager
- under active solution configuration, create a new configuration named test.
- Set the copy settings from : development
- Verify that Create new project configuration is checked.
- click OK and close.
- Notice that the active configuration is now Test
- Make some changes the Testsource.ds like a different server.
- Verify that those changes are also in the package.
- Make the development configuration as active.
- Notice that the Testsource.ds contains now the original settings.
- You will notice that the connection manager still contains the "test" settings and not the development settings.
- If you create a deployment utility it will still contains the wrong values.

with regards,

Constantijn Enders

View 1 Replies View Related

Integration Services

Jun 16, 2006

Hi all,

Can someone explain to me why I am getting this kind of error though I am able to integrate all the data succeesfully to the next destination.



Ronald







SSIS package "Prescription.dtsx" starting.

Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.

Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.

Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.

Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.

Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.

Error: 0xC0202009 at Data Flow Task, SQL Server Destination [521]: An OLE DB error has occurred. Error code: 0x80040E14.

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 58, column 1. The destination column (PatientId) is defined as NOT NULL.".

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 27, column 12. The destination column (ServiceId) is defined as NOT NULL.".

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 26, column 12. The destination column (ServiceId) is defined as NOT NULL.".

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 25, column 7. The destination column (AllergyCode) is defined as NOT NULL.".

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 24, column 7. The destination column (AllergyCode) is defined as NOT NULL.".

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 23, column 7. The destination column (AllergyCode) is defined as NOT NULL.".

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 22, column 7. The destination column (AllergyCode) is defined as NOT NULL.".

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 21, column 7. The destination column (AllergyCode) is defined as NOT NULL.".

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 20, column 7. The destination column (AllergyCode) is defined as NOT NULL.".

Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.

Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.

View 3 Replies View Related

Integration Services?

Apr 25, 2006

Hi,

is Integration Services included in SQL Server Express?

In what version/module?

Thanks

just Do It

View 1 Replies View Related

Integration Services

Jun 16, 2006

Hi all,

Can someone explain to me why I am getting this kind of error though I am able to integrate all the data succeesfully to the next destination.

I am trying to get the Prescription table from Access to SQL SERVER 2005 database



Ronald







SSIS package "Prescription.dtsx" starting.

Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.

Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.

Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.

Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.

Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.

Error: 0xC0202009 at Data Flow Task, SQL Server Destination [521]: An OLE DB error has occurred. Error code: 0x80040E14.

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 58, column 1. The destination column (PatientId) is defined as NOT NULL.".

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 27, column 12. The destination column (ServiceId) is defined as NOT NULL.".

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 26, column 12. The destination column (ServiceId) is defined as NOT NULL.".

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 25, column 7. The destination column (AllergyCode) is defined as NOT NULL.".

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 24, column 7. The destination column (AllergyCode) is defined as NOT NULL.".

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 23, column 7. The destination column (AllergyCode) is defined as NOT NULL.".

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 22, column 7. The destination column (AllergyCode) is defined as NOT NULL.".

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 21, column 7. The destination column (AllergyCode) is defined as NOT NULL.".

An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The bulk load failed. Unexpected NULL value in data file row 20, column 7. The destination column (AllergyCode) is defined as NOT NULL.".

Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.

Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.

View 1 Replies View Related

Integration Services

Jun 20, 2006

I'm trying to use the new integration services and have found all kinds of help for it, but where is it? I can't find it. Is it in the SQL Server Management Studio?

View 1 Replies View Related

Integration Services (SSIS)

Jul 25, 2007

Hi,

I want to insert datas from a txt-file into a sql-table.
Therefor i would use a xml-file for the structure!

How can i refer this xml-file to a measurement insertion task?


Tanks for your help and sorry for my bad english :rolleyes:

View 1 Replies View Related

SQL 2005 Integration Services Help

Jul 23, 2005

I am trying to know how to read many XML files within one data flowtask. I have many many files that I would like to apply to with thesame data flow so I need to know how to read them in and what taskshould I use under SQL 2005 DTS/Integration services.Thanks for your help!JON

View 1 Replies View Related

Doubts On Integration Services

Jan 14, 2008

Good morning,

I've to do a mining project and I intend to use the SSIS.

I've done a clustering plugin last year on analysis services and I also want to use it.

Let me try to explain the architecture of the process:

1) Receive data (read data from the database - these data are texts, actually)

2) Pre-process the data (transform the texts in a sparse matrix) using a new plugin

3) Call my clustering plugin and assign it to read the table created on the previous step

4) Call my KNN plugin to classify other pre-processed texts using the clusters found on the previous step as classes.

5) Show results.

Alright... It all running as a workflow on integration services

Here are my doubts:

A) How to view and use my plugin made for Analysis Services on Integration Services ? (is it possible or will I have to create another plugins from zero just to run on Integration Services ?)


B) Assuming the previous step is possible, how to modify my plugins to define inputs and outputs to do the correct communications between each plugin ? I think this is the most important question. Is it simple to do ? Is there any documented examples ?


Thanks a lot for your attention once more,

-Renan Souza

View 1 Replies View Related

Cannot Install Integration Services

Nov 15, 2005

Hi!

View 28 Replies View Related

SP1 - Killing Integration Services

Apr 5, 2007

Don't know what's the problem while installing SP 1 it just kills the Integration Services. Did any one had this issue?



Thank you - Ashok

View 6 Replies View Related

Cannot Connect To Integration Services

Nov 16, 2006

When i try to connect to SQL 2005 integration services from object explorer i get connected (in the sense it shows in object explorer running packages stored packages ..)but when i try to exand any of these objects i get the following error

--------------------------------------------------------------------------------------------------

Failed to retrieve data for this request(Microsoft.sqlserver.smoEnum)

Additional information

The sql server specified in SSIS service configuration is not present or not available.This might occur when there is no default instance of Sql server on the computer. For more information see "config integeration services" in server 2005 books online.

Login time out expired

An error has occured while establishing a connection to the server.When connecting to the Sql server 2005, the failure may be caused by the fact that under default settings Sqlserver does not allow remote connections.

Names Pipes Provider: could not open a connection to Sql Server[2].(MsDtsSrvr)

----------------------------------------------------------------------------------------------------------

i have chkd remote connection settings and other settings but cant find a way out.

kindly provide some help

Thanks in advance



View 4 Replies View Related

Upgrading To Integration Services From DTS

Sep 26, 2007

Hi

We have developed a datawarehouse using DTS in 2000. Now we have started using 2005 and as it supports DTS so there no issued for our datawarehouse to run.

But every six months there are new requirements and we achange and add to the existing DTS, but now DTS development is not supported in 2005, can we use itegration services for the same and embedd it with the existing DTS or do I need to redevelop the datawarehouse using SSIS.

View 1 Replies View Related

Integration Services In SSMS

Jul 12, 2007

We use Windows Authentication to connect to SQL Server, is there any special permissions required to connect to Integration Services in SSMS?

Whenever I try to browse the servers available with Integration Services (from Object Browser), none of the servers gets listed. If I directly give server name and try to connect to Integeration Services I get the following error. But I'm able to connect to the database engine.

TITLE: Connect to Server
------------------------------

Cannot connect to <servername>.

------------------------------
ADDITIONAL INFORMATION:

Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476

------------------------------

Connect to SSIS Service on machine "<servername>" failed:
Access is denied.

------------------------------

Connect to SSIS Service on machine "<servername>" failed:
Access is denied.

Thanks

View 5 Replies View Related

X Cannot Run On This Edition Of Integration Services. Again!!

Oct 11, 2007

Hi,
I'm a little confused now on when I need to install SSIS services, according to the following

http://msdn2.microsoft.com/en-us/library/ms345193.aspx

I don't need to have SSIS service installed on my sql server to run SSIS packages as jobs. So I've now deployed my packages to our live clustered SQL server, and I even have a package that runs to a point.
So basically the package imports some data then reprocesses a dimension on the cube, it imports the data ok, then fails to process the cube with the following message


Description: The task "Process Cube Dimension DimFiscalPeriod" cannot run on this edition of Integration Services. It requires a higher level edition.

Now the SQL server is enterprise edition, so do I really need to install SSIS on this server or not ?


Thanks for any help in advance

Steve

View 6 Replies View Related

Integration Services :: RPC Server Not Available

Nov 5, 2015

I'm having issues trying to connect to a remote SSIS server. Connection between servers within the DC works.  Port TCP 135 and 139 are open.  Also tried to connect using IP address but the same error occurs.  Do i need to open more ports?

 The SQL version installed in 2014.

View 10 Replies View Related

Integration Services :: First Day Of The Year

Jul 17, 2015

I try to build a variable with the first day of the year so I could calculate the YTD.

I play with DATEADD, DATEPART and DATEDIFF functions but I unable to get the date.

View 9 Replies View Related

Starting With Integration Services

Apr 16, 2008

Hi guys,

I'm a .NET developer. Now I'm getting more involved with DB and I need to rune some scheduled jobs that involve mostly data.
They have to retrieve data from several sources, work with it and then wrap it together and insert the result into a table.
A lot of logic (code) is needed in the process.

For what I can see the best way could be using Integration Services, am I right?

Where could I start looking how it works and how can I use code and several things?

Thanks a lot.


Edit: Also, is it possible to use .NET assemblies in some way?

View 1 Replies View Related

Integration Services Will Not Start

Nov 26, 2007

I am not able to start Integration services on my windows 2003 machine. I get the below error. The request failed or the service did not respond in a timely fashion. Consult the event log or application error log for details. I am a newbee for MS SQLSERVER. I did not see any errors in the event log. I checked the sqlserver log and found the below message. I am not sure if this could be related. The SQL network Interface library could not register service principal name (SPN) for the SQL service error: 0x2098. This machine is clustered and integration services seems to work without issues on the first node.

View 7 Replies View Related

SQL Integration Services Project

Oct 18, 2006

I recently created an SQL Server Integration Project (DTS package) using the SQL Server Business Intelligence Development Studio. At the time of creating the project I had access to all my SQLServer 2005 databases in order to create the Data Flow. However now that the application has been deployed I no longer has access to the data sources used in the creation of the Data Flow tasks.

Is it still possible to make changes to the Integration Service Project solution with out been able to connect to the original data sources and re-build the package ?



View 2 Replies View Related

Integration Services Considerations

Sep 14, 2007



We have about 150 SQL servers and basically we're considering the pros and cons of installing SSIS on a central SSIS server - that is responsible for all DTS jobs - as opposed to installing SSIS on the local SQL instance.


On the plus side so far:


1./ Central administration, alerting, change management etc

2./ Possible performance gain on the local instance not having SSIS installed?



On the negative side:


1./ Central point of failure

2./ Possibility that it would need to be a clustered...

3./ Compatibility issues may mean having to make the central SSIS server 32-bit?

4./ Possible performance cost of remote SSIS?

5./ With multiple DTS packages running at different times, when would we take the server down for maintenace...?

Would appreciate your thoughts.

View 1 Replies View Related

Integration Services Won't Install

Jan 12, 2007

I am installing Visual Studio 2005 Professional on Windows XP.

I have finished installing Visual Studio 2005 Professional along with Service Pack 1. Now I am installing the Developer version of SQL 2005 that comes with Visual Studio 2005 Professional .

During the installation of SQL Server 2005, I got the following error during
the integration services installation portion:

Failed to install and configure assemblies: c:program filesmicrosoft sql
server90dts asksmicrosoft.sqlserver.msmqtask.d ll in the COM+ catalog.
Error -2146233087

Error message: unknown error 0x80131501
Error description: You must have administrative credentials to perform this
task.

I'm logged into Windows as Administrator.


This machine did previously have VS 2005 Standard and SQL 2005 Standard loaded. The software was RTM software as provided by Microsoft at their launch event. I did uninstall both products before attempting the upgrade.

Any help would be much appreciated.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved