Execute SQL Task With In A For Each Loop
Apr 24, 2006
hi guys,
i'm trying to do a bulk insert through a t-sql which accepts 3 params.
i frist run a SQL statement to get a list of DB's to update through a SQL task, then i save the output to a variable object. which is been used by the For each loop.
i've done the mapping with the object fine. but i want to call a SQL task within for each loop, and parse the above results as parameters. i tried parsing it as
exec mysp3 @[User::fundid], @[User::dbCode], @[User::subfund]
where fundiid, dbcode and subfund are user defined variables that gets updated by the ado recordset.
this fails with the error msg:
SSIS package "SP test.dtsx" starting.
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "exec ConnectODBC @[User::fundid], @[User::dbcode], @[User::subfund] failed with the following error: "Incorrect syntax near 'User::fundid'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task
Warning: 0x80019002 at Shred the contents of the variable: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "SP test.dtsx" finished: Failure.
i also tried
exec mysp3 ?, ?, ?
then mapping the inputs still doesn't work
same thing with
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "exec ConnectODBC ?,?,? failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task
View 3 Replies
ADVERTISEMENT
Jun 21, 2007
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
View 5 Replies
View Related
Jul 10, 2007
Hi all,
I got this problem and before post I've read many post similar in the forum (sorry for my english I try to do my best....i'm italian)
This is my scenario.
1) SQL
SELECT
UPPER(SUBSTRING(FileImportazione, 7, 50)) AS str,
Id
FROM Sources
WHERE (TipoImportazione = 0)
This is an SQL task and from this I create a Object variable "ObjDs" on scope package1
2) I introduce a loop (Foreach ADO Enumerator) on my object variable "ObjDs".
Here I mapping two variables "IDsources" and "str" (as you caqn see from my first sql)
Now I set a breakpoint into the beginning of my cicle and really see the dinamic change of the values from "watch" windows.
Now start my problem.
Into this loop I must do "X" operation....but first of all I must Update a table...so I simple SQL TASK...on the dinamic ID of my variable.
Ok, I put a SQL tast into the loop, set SQLsourceType = Variabile, resulset = none, and create an expression like this (SQLstatementsource):
"UPDATE New_pangea.dbo.Sources SET InAggiornamento = "+ (DT_WSTR, 4) @[Utente::IDsources]
If I don't cast (DT_WSTR, 4) I got always an error...
The data types "DT_WSTR" and "DT_I4" are incompatible for binary operator "+". The operand types could not be implicitly cast into compatible types for the operation. To perform this operation, one or both operands need to be explicitly cast with a cast operator.
Attempt to set the result type of binary operation ""UPDATE New_pangea.dbo.Sources SET InAggiornamento = " + @[Utente::IDsources]" failed with error code 0xC0047080.
so I put and validate myexpression.
before my global variable @[Utente::IDsources] change the value to true of EvalutateAsExpression.
Something goes always wrong...When I try debug...this is the error
Errore in Execute SQL Task: Failed to lock variable "UPDATE New_pangea.dbo.Sources SET InAggiornamento = 0" for read access with error 0xC0010001 "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created.".
Errore in Execute SQL Task: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
Hope someone can help me, thanks Alen
View 2 Replies
View Related
May 3, 2007
Okay, can someone explain why when I execute children packages within a loop that only a couple of them work?
When I first started this I had Child Package 1 and Child Packge 2 working from the Parent Package 1. It would loop through twice (I had 2 organizations in my outer loop) and pass in the Parent Package variables correctly.
I am using a simple "Foreach Item Enumerator" with a collection of string enumerators that are the Names of the children packages - these are assigned to a variable that is scoped to the outer loop.
Now, when I add a new Child Package 3 and set it up the same as the other 2, when it goes to execute Child Package 3 it fails with the error:
"Error: The connection manager "[My Package Name].dtsx" is not found. A component failed to find the connection manager in the Connections collection. "
What in the world have I done? I was under the assumption that since the first 2 packages worked, that any other packages I added would work the same.
View 3 Replies
View Related
Feb 15, 2008
Hi, I'm trying to loop thru a table and insert records into another table in ssis. So far I have been able to get the data using a execute sql task set up to store the full result set into a variable called data. I then drug a foreach loop container out and selected the foreach ADO enumerator and used my variable data as the ADO object source variable. I then set up a new variable under variable mappings with index 0 to get the collection values. How do I take that variable and update another table using another sql task inside the foreach loop container? Is this possible?
thanks,
View 8 Replies
View Related
Oct 19, 2015
I have ForEach Loop using Foreach File Enumerator. Within this loop I have SQL Task containing an Insert statement. When I run the Insert statement in query builder the transaction inserts data into a table as expected.
However, when actually running the process I am getting the error message:
Executing the query "INSERT INTO dbo.TEST_TABLE
..." failed with the following error: "Value does not fall within the expected range.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I currently have the ResultSet to "None" and have defined the parameter I am using. Where the process seems to joke is on my file_Name variable will I am trying to insert only part of the file name.
My insert statement looks as follows:
INSERT INTO dbo.TEST_TABLE
(IID, AN8, File_Type, IB_OB, File_Name, Processed_Flag, ReceiptDateTime)
VALUES
(
'1111',
'123',
'888',
'IB',
RIGHT(LEFT(?, LEN(?) - 4), LEN(?) - 24),
'I',
GETDATE())
View 0 Replies
View Related
Sep 10, 2007
Hello All
I was trying to insert some row from one table to another of different database.
I was using Execute SQL task along with Foreach loop container.
In my execute SQL task I am using this query
SET IDENTITY_INSERT dbo.Table1 ON
INSERT INTO dbo.Table1
SELECT * FROM DB2.dbo.Table2
WHERE TableKey = ?
When executed I get this error:
failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
While the same query when executed in Management Studio Its successful.
The properties I set
For Each Loop Editor Settings:
1) Collection: a) Enumerator Set to ForEach ADO Enumerator
b) ADO Object Source Variable: User:bjectVariablename
c) Checked Rows in the first table
2) Variable Mapping: New Int Variable2 and Index = 0 to set it to first colunm.
3) Expression: Left blank
Execute SQL Task Editor:
1) General: a) Timeout : 0
b) CodePage: 1252
c) Result Set: None
d) SQLSourceType: Directinput
e) SQL Statement: SET IDENTITY_INSERT dbo.Table1 ON INSERT INTO dbo.Table1 SELECT * FROM DB2.dbo.Table2 WHERE TableKey = ?
f) BypassPrepare: False
2)Parameter Mapping: Variable Name : New Integer variable2 selected
Direction: Input
DataType: Long
ParameterName: 0
Can somebody help me in this regards.
Reference:
a) http://www.whiteknighttechnology.com/cs/blogs/brian_knight/archive/2006/03/03/126.aspx
View 10 Replies
View Related
Feb 27, 2008
Hi all,
I'm trying to capture the file name and insert to the Database with Loop Container and Execute Sql task...However when I run, I get error with the input parameter.
In my Sql Task, the parameter mapping:
Variable name: user::variable,
direction: input,
Data Type: Varchar,
parameter name: @xVariable,
parameter size: -1
connectiontype: OleDB
sourcetype: direct input
statement : insert into xtable(xcolumn) values(@xVariable)
Anyone have any other suggestion how to capture the filename and input in the database?
thanks
View 4 Replies
View Related
Jan 8, 2008
Hi,
I am trying to use SSIS.Execute Process Task within Foreach loop . The task should unzip a a variable gzip file provided to it from the previous task
to execute the command from cmd C:Program FilesGnuWin32ingzip.exe -d -k c:folderfilename
My input in the Execute Process Task as follow:
The command line: C:Program FilesGnuWin32ingzip.exe
Argument: -d -k c:folder
Variable: User::var_filename
keep getting error
The process exit code was "1" while the expected was "0".
Thanks
View 3 Replies
View Related
Mar 21, 2007
Hi:
I am a R data miner who is new to SQL and SSIS and would appreciate any help.
I wanted to automate the process of creating and processing decision tree models for every county in the Country. I wanted to use the foreach loop for iterate through all the counties. I wanted the foreach enumerator to be used by the XMLA code that creates the model so it would append it to the name of the model and i would get a different model for every county. I am not sure how to have the XMLA code accept foreach loop enumerator.
Any help would be greatly appreciated and if you could direct me to a previously done example that would greatly benefit me.
Thank you
avneet
View 1 Replies
View Related
Jul 19, 2007
hi
I am trying to execute a UDF in an Execute SQL Task within a Foreach loop.
I have an Execute SQL task to get the dataset (Firstname, Lastname, CompanyID) which is going into a full result set called @PendingPar. The Foreach Loop is set to a Foreach ADO Enumerator against @PendingPar and I have created 3 variables at the Foreach Loop scope level called @Firstname (String), @Lastname (String) and @CompanyID (Int32). These are mapped in the Foreach Loop as index 0,1 and 2.
Within the Foreach Loop I have an Execute SQL Task with the sql command
select dbo.udf_GetParTitle (?,?,?)
In the parameter mapping I have Variable Name = User::Firstname Direction = Input Data Type = VARCHAR and Parameter Name = 0, User::Lastname, Input, VARCHAR, 1 and User::CompanyID, Input, VARCHAR,2
Finally the UDF returns a @NewPar value so i have the result set in the execute sql task to Single Row which goes into variable @NewPar. This @newPar will be used later but I cannot get the first bit to work yet.
the error message i get back is
Error: 0xC002F210 at Execute SQL Task 1, Execute SQL Task: Executing the query "select dbo.udf_GetParTitle (?,?,?)
" failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task 1
the initial execute sql task where the dataset is selected works fine but it is within the foreach loop that it fails.
any help gratefully recieved
View 6 Replies
View Related
Jun 9, 2006
Here's the set up:
ForEach Loop Container:
Collection: Foreach File Enumerator
Variable Mappings: Variable = User::DailyFile, Index = 0
Execute SQL Taks:
Connection: OLEDB
ResultSet: None
SQLStatement: EXEC spGetFile ?
ParameterMapping: VariableName = USER::DailyFile, Direction = Input, DataType=VARCHAR, Parameter = 0
This works great it iterates through a file and looks at all the files checks to see if they have been loaded into the db table, if not it loads the file.
My spGetFile has RETURN 1 if a file is loaded and RETURN 0 if the file is not loaded.
Now I add a new variable:
Step 1: add to Foreach Loop Container
ForEach Loop Container Name = Return, Scope = ForEachLoop, Data Type= Int32 Value=0
Step 2: Add to Execute SQL Task:
VariableName = User:Return, Direction = ReturnValue, DataType = Long, ParameterName =1
This produces the following error:
~~"Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.~~
I tried with an ADO.Net connection ... works until I add the ReturnValue parameter ...
Any ideas??
Thanks
View 4 Replies
View Related
Jan 18, 2007
Hi ALL,
Getting Access Denied To FileName Error When Using the Execute Sql Task (With File Connection) into a Foreach Loop Container.
Please Note :
I have a folder containing .sql files. I have to dynamically loop through the files and send them as a File connection Folder to the Execute Sql Task.
When I run this Package I am getting the follwoing error :
[Execute SQL Task] Error: An error occurred with the following error message: "Access to the path 'C:ProjectsFuzzy Lookup DataFlow ExampleScripts' is denied.".
Also I have logged in to the machine as Administrator and to Sql Server with sa.
Please help.
Thanks.
Regards,
Salil
View 1 Replies
View Related
Dec 6, 2007
HI, I need to trigger some packages upon existance of specific files in a particular directory. Sound lkike the file watcher task (from SQLIS) would do the job but I am wondering what is the difference of using this tool instead of a for each loop container. I mean, If a file exists in a directory, the for each loop container will detect it. Since the file watcher is not a service, the package containing it needs to ne scheduled on a regular basis for the filewatcher to detect the file, right? So, a for each loop container would do the job? So, waht wouldbe the advantage of using the file watcher task?
Thank you,
Ccote
View 11 Replies
View Related
Dec 6, 2006
Dear all:
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
Many thanks,
Tomorrow
View 5 Replies
View Related
Apr 19, 2007
I'm looking for a way to refer to a package variable within any
Transact-SQL code included in either an Execute SQL or Execute T-SQL
task. If this can be done, I need to know the technique to use -
whether it's something similar to a parameter placeholder question
mark or something else.
FYI - I've been able to successfully execute Transact-SQL statements
within the Execute SQL task, so I don't think the Execute T-SQL task
is even necessary for this purpose.
View 5 Replies
View Related
Jul 1, 2015
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
View 3 Replies
View Related
Mar 12, 2008
I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.
I would like know which method is faster:
Use Execute SQL Task to insert the result set to the target table
Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination)
Could you tell me why then other is slower?
Thanks.
View 7 Replies
View Related
Dec 2, 2005
I have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
View 7 Replies
View Related
Mar 28, 2007
In the Control flow tab, I have an Execute SQL Task that outputs full Result set into a variable of an object type. Now how can I write the contents of the Full Result Set into a text file using Script Task. I also want to format the following way while I output into a file:
Column Name 1 : Column Value
Column Name 2: Column Value and so on
I tried writing the contents of the Object Variable into a file, but the file had an output of single word: System.__ComObject.
Code for Writing the Full Result Set into a Text File
Dim RSsqloutput as String = Dts.Variables("objVariable").Value.ToString
Dim strVal as String = "File completed on " & Now() & vbCrLf & "------------------------------------------------------" & vbCrLf
oLogFile.WriteAllText("C:MyFile.txt", strValue)
oLogFile.WriteAllText("C:MyFile.txt", rsSQLOutput)
I went through this link that explains how to write XML Result Set into a File, But this doesn't help as it writes in XML format.
Would you please give me a hint of code how I can go upon.
View 7 Replies
View Related
Jun 14, 2006
Hi
I have an application like fetching records from the DataBase(MS Access 2000) and results i have to use in Script Task. At present i have used the record fetching query,connection string in Script itself. I would like to use in Independently. Is there any Tools like (Control Flow Tools like Execute SQL Task) are there to fetch the result set from Acccess and can use the fetching results in Script Task....
Thanks & Regards
Deepu M.I
View 5 Replies
View Related
Jun 25, 2007
I have a SSIS package contains an "Execute SQL Task". The SQL will raise error or succeed. However, it sounds the package won't pick up the raised error?
Or is it possible to conditional run other control flow items according the the status of SQL task execution?
View 1 Replies
View Related
Sep 21, 2006
Hi everyone,
For first time I'm testing this task and surprisingly, when I try "Edit Package" option:
1)The DTS host failed to load or save the package properly
2)The selected package cannot be opened
3)Error HRESULT E_FAIL has been returned from a call to a COM component
But after these messages you can see all the tasks but they haven't name!!
It seem as if RCW mechanism has failed between managed and unmanaged coded-partially.
I don't dare to follow doing more stuff, I don't know if that package is well-loaded or not from there. ?¿
Any guidance or idea about this?
View 5 Replies
View Related
Jun 12, 2007
An Execute SQL task takes 1 min to run a statement "insert into Mytable select * from view_using_joins"
Output: 10,225 rows affected.
But a Dataflow task configured to fetch data from the same view_using_joins into MyTable takes hours to do the same.
Could you please explain why is it so ?
Thanks
Subhash Subramanyam
View 14 Replies
View Related
Apr 18, 2006
Hi. I am running a package using 'execute package' inside a for each loop file iteration. I have to iterate through some 10,000s of files to ETL source data, a resonably complex package. I want to set going and get some sleep but every 200 files or so I get a memory exhausted error and the task fails. Is there a short easy fix to refresh memory each iteration. If so please let me know. Just ignoring the failure at task level won't refresh the memory, will it?
Thanks for the help.
View 1 Replies
View Related
Nov 8, 2006
Hi,
My Foreach Loop container has 10 different task inside. I want to execute the first task only one time. I have a variable with increases for each repition. How can I put precedence contstraint on the first task so that it should execute only first time and other task has to execute all the time.
Thanks
View 4 Replies
View Related
Jan 29, 2007
In Dts you can loop a package by creating an Active-X script with something like this ...
"oPackage.Steps("DTSStep_1").ExecutionStatus = DTSStepExecStat_Waiting"
"oPackage.Steps("DTSStep_2").ExecutionStatus = DTSStepScriptResult_DontExecuteTask"
What is the way to do in SSIS? Depending on a condition i want to rerun my package but have not found a smooth way to do it. I guess you can do it in a better way than using the ActiveX Script Task
have a nice day
/Erik
View 4 Replies
View Related
Oct 18, 2007
I want to iterate through a for loop and run some SQL update statements:
I have a variable wk_day that has a scope of the container
I want it to run this code:
update daily_sls_curr set mtd_ty_sls = (
select sum(ty_sls) from daily_sls_curr ci
where ci.fmonth = (select max(fmonth) from daily_sls_curr)
and wk_day <=@wk_day
and ci.store = daily_sls_curr.store
group by store)
where fmonth = (select max(fmonth) from daily_sls_curr)
and wk_day = @wk_day
repeatedly from the loop for 35 days of the fiscal month
When I parse the query, it gripes at the variable
How do I set up the query to work with the variable?
Thanks
JPS
View 7 Replies
View Related
Jun 14, 2006
Okay, I have a For each loop container that has an enumeration of folder locations. I run a script to filter the files in those folders and prepare them to the next task to be copy. I want the script to "continue" the loop if none of the files meet the criteria. Can someone point me into the right direction? I need some way to advance through the loop when this happens.
Thanks!
View 1 Replies
View Related
Aug 29, 2006
I have a .bat file that calls a script file to log in to a server and upload a file to my pub account. When I run the .bat file it just executes the command over and over and never executes the script file. Does anyone know why? Am I missing something in my script or .bat file commands below?
my .bat file contains this--->ftp -s:script.txt
my script file contains this:
open myserver.com
username
password
put W:UPLOADdoc.txt
bye
exit
Thanks,
Mike
View 6 Replies
View Related
May 9, 2008
Hi I have created a web service task that sits inside of a foreach loop. The loop is a ado enumerator. This loop is going to loop through about 35,000 records and make 35,000 web service calls.
So far through my testing, I have gotten it to read and write everything correctly, but each call to the web service takes about 1-2 seconds and maxes out the CPU. This would take almost all day for this web service to run at 100% CPU power all day. We want to be able to run this a few times a day or at least once a day.
I have disabled all of the other tasks in the foreach loop so it just calls the web service task and found that it's the web service task that takes up 100% of the CPU and takes 1-2 seconds to run. I have also tried creating a mock web service on the server that just sends back the same mock data, so it's extremely fast, but the Web Service Task still maxes out the CPU and takes 1-2 seconds per call.
I have tried this out on 2 different servers, all with a few gigs of ram they're not using. It seems more like it's a CPU thing, or that the Web Service Task has a high overhead that each time in the loop it takes 1-2 seconds to create the task.
Anyone have any advice?
Thanks,
-Will
View 6 Replies
View Related
Mar 3, 2008
I have written a recursive loop, the function using dataview.rowfilter ="something".
On some servers I am getting a weired issue. when I am interating through rows in dataview its throwing me an error.
"No row at position 1", I am using rowView("ColumnName")
strange thing is the underlying data row is returning me the value but row view is throwing an error.
I thought its an issue with SP1, but after installing SP2 still failing..
View 1 Replies
View Related
Oct 5, 2007
Hi,
I have a FOR EACH LOOP that loops through a bunch of folders in search of particular filename (including path). That part works fine.
Then, INSIDE the FOR EACH LOOP, I have a script task that evaluates the filename and grabs the date portion of the filename. That part works fine too.
Now, here's my dilemma. If the date portion of the file name IS GREATER THAN the the value of another date in a variable, I want it to load the file into a table using a data flow task.
So, this is what my package looks like:
[ FOR EACH LOOP (Script task --- evaluate the date using an expression (see below) ---> Data flow task) ]
My expression looks like this:
@[User::fileDate] > @[User::maxLoadDate]
You think that this would work, right??
However, after the VERY FIRST iteration of the loop, the script task turns green, then it goes right to the data flow task, which then says that the file name is "", and can't be loaded. (I'm not sure why this is occuring)
My question is, is my logic correct? Can I use an expression inside the for each loop and have it work?
View 1 Replies
View Related
