Execute Sql Task To Set Output Parameter Of Type Integer
Jun 1, 2006
I'm having a heckuva time with creating output parameters based on a query.
Here's what I'm doing. Every day, we copy rows from our mysql table to our sql server table. We only want to copy those rows that are new, so as to not have to recopy the entire table.
So I have a DataReader Source set to Ado.net/odbc provider that connects to the mysql db.
The destination is an OLE connection to the local sql server.
I create an Execute SQL Task.
The connection is set to the OLE connection
The type is direct input
The SQL Statement is "select max(id) from copy_table"
In Parameter Mapping, I create a user variable called maxId that is an int64. That variable is now used as the Variable Name. The Direction is Output. The Parameter Name is 0.
Whatever data type I use for the mapping does not work with the variable type. If the parameter was set to ULARGE_INTEGER, here's the error
[Execute SQL Task] Error: Executing the query "SELECT MAX(stats_id) AS max_id FROM copy_table" failed with the following error: "Type name is invalid.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
If parameter is set to LONG:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "maxId": "The type of the value being assigned to variable "User::maxId" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. ".
I found that if variable and parameter were dates to use datetime for the variable and DBTIMESTAMP for the parameter.
There are an awful lot of combinations between all the possible variable types, and the possible parameter types. Does anyone know the secret combination for your typical integer?
Thanks,
Lori
View 5 Replies
ADVERTISEMENT
Dec 2, 2005
I have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
View 7 Replies
View Related
Feb 28, 2008
Hi all,
I'm trying to capture the OUTPUT from Execute Sql task...However when I run, the parameter didn't seem to capture the OUTPUT.
In my Sql Task, the parameter mapping:
Variable name: user::variable,
direction: OUTPUT,
Data Type: Varchar,
parameter name: 0,
parameter size: -1
connectiontype: OleDB
sourcetype: direct input
statement ELECT columnx FROM table1 WHERE (columnID=
(SELECT MAX(columnID) ASID
FROM table1 A)
I could be misunderstood on how Execute sql task work on Output.
thanks
View 5 Replies
View Related
Jan 2, 2007
Hi Everyone,
I haven't been able to successfully use the ADO.NET connection type to use both input and output parameters in an execute sql task containing just tsql statements (no stored procedure calls). I have successfully used input parameters on their own but when i combine it with output parameters it fails on the simplest of tasks.
I would really find it beneficial if you could use the flexibility of an ADO.NET connection type as the parameter marker and parameter name can be referenced anywhere throughout the sql statement in no particular order. The addition of an output parameter would really make it great!!
Thanks
View 11 Replies
View Related
Dec 18, 2007
Hi Everyone,
I'm trying to do something that should be fairly straightforward, but SSIS seems to be getting confused. I have a stored procedure which takes a timestamp as an input parameter. (NOTE: It's not a DateTime that's being stored as a DBTIMESTAMP, it really is a timestamp in the SQL sense.)
The command should be something like this:
Code Block
EXEC dbo.UpdateSynchTimestamp ?
I tried to use my variable to pass the value through Parameter Mapping, but I got an unusual error:
[Execute SQL Task] Error: Executing the query "EXEC dbo.UpdateSynchTimestamp ?" failed with the following error: "An error occurred while extracting the result into a variable of type (DBTYPE_DBTIMESTAMP)". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
This is strange for a number of reasons:
1) The DBTIMESTAMP parameter has the Direction set to "Input", so it should not be interpreted as an Output or ReturnValue.
2) The Execute SQL Task has Result Set = "None", so it should not be trying to return anything.
If I change the code to include a value hard-coded it works:
Code Block
EXEC dbo.UpdateSynchTimestamp 0x00000000000013BD
It is only when a variable is involved that it breaks.
Finally, here's the Stored Procedure itself:
Code Block
CREATE PROCEDURE [dbo].[UpdateSynchTimestamp]
@NewValue TIMESTAMP
AS
BEGIN
SET NOCOUNT ON;
UPDATE ServerSettings
SET [Value] = @NewValue
WHERE [Key] = 'SynchTimestamp'
END
Doe anyone have any suggestions as to why this isn't working for me? For the time being, I have a Script Task which constructs the command text and stores it in a variable. I can't even use an Expression because the DBTIMESTAMP is not supported.
Thanks for reading this!
View 12 Replies
View Related
Jul 12, 2006
Hi, I am trying to use an integer as input parameter for my task I get suck on the parameter data type.
The input parameter is define as @Control_ID variable as Int32 in SSIS. When I got into the parameter mapping of Execute SQL Task, I don't find the Int32 data type. I used to try Short, Numeric, Decimal and so on, but all of those data type didn't work. and it returns the following error message:
SSIS package "DCLoading.dtsx" starting.
Error: 0xC002F210 at Update Control_ID, Execute SQL Task: Executing the query "use DCAStaging
update DCA_HFStaging set
[dbo].[Control_ID] = P0 where [Control_ID] is null
" failed with the following error: "The multi-part identifier "dbo.Control_ID" could not be bound.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Update Control_ID
Warning: 0x80019002 at DCLoading: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "DCLoading.dtsx" finished: Failure.
Any help?
View 6 Replies
View Related
Sep 17, 2007
I'm having problem on trying to execute a query in stored procedure that has parameters as a integer. The parameter with the integer is in the WHERE clause. If I take out the WHERE clause, it would work. If I take out the parameter and replace it with a value, it would work. I have try using the CONVERT function to convert it to an integer, still no luck.
Error: Unterminated String Constant.
What is the problem?
Set @strSQL='Select * From(SELECT Row_Number() Over(Order By ' + @SortExpression + ') as Row_Count,Rank() Over (Order By ' + @SortExpression + ') as TableInfo_ColumnSort,dbo.EVENT_LOGS.EVENTLOG_ID, dbo.USERS.USERNAME, dbo.EVENT_LOGS.ITEM_TYPE, dbo.EVENT_LOGS.SCREEN_ID, dbo.EVENT_LOGS.CHANGE_TYPE, dbo.EVENT_LOGS.IP_ADDRESS, dbo.EVENT_LOGS.CREATE_DATE,dbo.USERS.FIRST_NAME,dbo.USERS.Last_NAMEFROM dbo.EVENT_LOGS INNER JOINdbo.USERS ON dbo.EVENT_LOGS.USER_UID = dbo.USERS.USERID) as TableInfoWhere Row_Count Between ' + @startRowIndex + ' and ' + @maxRowIndex + ' ';Exec(@strSQL);
View 3 Replies
View Related
Apr 19, 2007
I have a stored procedure that returns XML and have defined my own "Root" element w/ "ROOT('urlset')" in the stored procedure. When I put this into my Control Flow, I have a subsequent task that takes this XML stream and writes it to a file. The issue I am running into is that SSIS is adding it's own "Root" element before my output. Is there any way of avoiding this?
View 4 Replies
View Related
Feb 1, 2007
Hi,
I am trying to do the following without success;
I have a UDF which returns a string of XML data (of the data type XML)
I want to use this UDF within an Execute SQL Task to set a variable to the output of the UDF. I then want to use the variable to pass the XML string to a XML Task to apply an XSLT to the XML.
I have set the following properties in the Execute SQL Task:
ResultSet: XML
SQLSourceType: Direct Input
SQLStatement: SELECT [dbo].[fn_GENERATE_XML](123) as rawxml
ResultName: 0
Variable Name:user::xml (where the variable is of type string)
My problem is something to do with the UDF call as if I substitute the UDF for a simple SELECT statement with a FOR XML Clause it works fine.
Any ideas where I am going wrong?
Thanks
View 1 Replies
View Related
May 10, 2007
If ive got different pieces in a dataflow, how could I for example, see the output of a datasource before it gets to destination ? If im executing a task, what can i get access to from the immedate window to see the outputs at various stages ?
View 1 Replies
View Related
Oct 25, 2006
I'm just starting to find my way around SSIS, coming from SQL 2000 DTS, but I can't see a way of including a Win32 Console application's output into the logging process.
I've started playing around with SSIS Logs (OnTaskFailed etc..), but I can find no where to allow me to capture the output from a console app. In SQL 2000 DTS I could capture this by specifying an "output file" on the advanced tab of the job step definition. Is there something as straight forward as this in SSIS ?
I'd be grateful for a few pointers in the right direction.
View 4 Replies
View Related
Apr 17, 2008
Hi guys. I have a procedure with just one parameter. That's a output parameter. It's type is NVARCHAR
I think there's no problem with the procedure. Now I want to execute it. Can I declare that variable passed by parameter to the procedure ? Must I use the Execute command ?
thanks a lot.
View 3 Replies
View Related
Nov 5, 2007
I am building this as an expression, but it is not working. I am trying to return the row count into a variable to use later in an update statement. What am I doing wrong? I am using a single row result set. I have one variable defined in my result set. I am receiving an error stating: Execute SQL Task: There is an invalid number of result bindings returned for the ResultSetType: "ResultSetType_SingleRow". Any help is appreciated!
SELECT count(*) FROM hsi.itemdata a
JOIN hsi.keyitem105 b on a.itemnum = b.itemnum
JOIN hsi.keyitem106 c on a.itemnum = c.itemnum
JOIN hsi.keyitem108 d on a.itemnum = d.itemnum
WHERE a.itemtypegroupnum = 102
AND a.itemtypenum = 108
AND b.keyvaluechar = " + (DT_WSTR,2)@[User::Branch] + "
AND c.keyvaluechar = " + (DT_WSTR,2)@[User:epartment] + "
AND d.keyvaluesmall = " + (DT_WSTR,7)@[User::InvoiceNumber] + ")
View 6 Replies
View Related
Jul 10, 2015
IS that possible to get teh output of a execute sql task to excel destination.I have query which will comapre the data difference between two databses. It will comapre all tables in both databses and list out the difference in data by each table. I need to run this query using SSIS and need to get the output to a excel sheet...I have used the data flow task to run this query but my query is giving some error when used with data flow task. So i have used excecute sql task and need to write teh out put to a excel sheet.
View 11 Replies
View Related
Nov 7, 2006
I am trying to create an Execute SQL task that sets a variable.
This is my SQL
DECLARE @Period AS DATETIME
SET @Period =Parameter0 + '/01/' + Parameter1
SET @Period = DATEADD(m, -1, @Period)
SELECT DATEADD(s, -1, @Period)
This statement parses okay.
I mapped two variables called "User::PeriodMonth" and "User::PeriodYear" in the Parameter Mapping tab to the parameters.
In the Result Set tabl I have mapped a variable "User::PeriodStartDate" to Result Name "PeriodStartDate".
The error I get is the following:
[Execute SQL Task] Error: Executing the query "DECLARE @Period AS DATETIME SET @Period =Parameter0 + '/01/' + Parameter1 SET @Period = DATEADD(m, -1, @Period) SELECT DATEADD(s, -1, @Period) " failed with the following error: "Parameter name is unrecognized.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
The Online Books are not helpful. They just say you have to bind the parameters to the application variables.
What am I doing wrong?
I want to set another variable called "PeriodEndDate" also. Can both variables be set in the same task?
View 12 Replies
View Related
Dec 3, 2007
I am trying to have an Excecute SQL Task return a single row result set executed on SQL Server 2005.
The query in the Execute SQL Task is:
select 735.234, 2454.123
I get a conversion error when trying to assign to SSIS variables of type Double.
I have nothing configured in the "Parameter Mapping" tab.
I have the two SSIS Double variables mapped to the Tesult Name 0 and 1 in the "Result Set" tab
I don't want to use a for loop enumerator since there is a single row returned.
I simply want to assign these two values to SSIS Double variables (double is the closest match)
I can't even hack this by converting the decimals as string and then using DirectCast to convert them to Double.
Thanks for the help
View 1 Replies
View Related
Jul 20, 2005
How can I make a stored procedure which has a output parameter withtext data type? My procedure is:CREATE PROCEDURE try@outPrm text OutputASselect @outPrm =(select field1 from databaseName Wherefield2='12345')GOHere field1 is text data type.Thanks
View 1 Replies
View Related
May 29, 2007
I'm trying to use "findstr.exe" to extract some lines of interest from a data file, which I will later load to a table. I'd like to issue this form of a command:
findstr.exe "^SEARCHSTRING" "srcfile" > "dstfile"
I build the arguments using expressions, and both the search string and source file get correctly set. However, the ">" seems to be ignored--I can see the lines spitting out to the temporary window when I run under VS.
QUESTION: how do you redirect the output of a command run under an Execute Process Task?
View 3 Replies
View Related
Apr 17, 2008
I have 2 questions on this
(1) I know how to use the ? ? ? and 0, 1, 2 notation in Parameter Mapping within Execute SQL Task. However, the interface allows me to give descriptive names to my parameters (other than the ordinals 0, 1, 2, ...). To be more clear, if you go into Parameter Mapping and click in Parameter Name column, you are not just restricted to typing in 0, 1, 2, ... You can type anything you want for the name. Does this suggest that I can use other things besides a "?" in my SQL command?
(2) What is Parameter Size? Is this like a data type? If so, why am I allowed to type in anything I want in there?
View 3 Replies
View Related
Dec 13, 2007
Hi All,
I am using a stored procedure defined as follows:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
CREATE PROCEDURE [dbo].[GetPriority] @PriorityID TINYINT
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
SELECT [Priority]
FROM [MTD Dashboard].[dbo].[Priority] WHERE [Priority ID]=@PriorityID
END
I want to use this stored procedure in a Execute SQL Task. What should be the SQL Statement, Parameter mappings and Result Set?
Can someone please help me in doing this.
Thanks
View 5 Replies
View Related
Mar 9, 2006
I am trying to assign the same package variable value to three different parameters in a query. The variable contains the name of a database which the user will input during package execution. First I check to see if the database exists (if it does I drop it), then in either case I create the database. See code:
if exists
(
select name
from sys.databases
where name = ?
)
begin
drop database ?;
end;
go
create database ?;
go
This is the error I am getting:
[Execute SQL Task] Error: Executing the query "if exists ( select name from sys.databases where name = ? ) begin drop database ?; end; " failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
My "User::DestinationDatabase" variable is mapped to 0,1,2 using an OLE DB connection. Any suggestions would be welcome.
Regards,
DO
View 13 Replies
View Related
Mar 20, 2008
Hi All,
I have a Doubt in Parameter Passing in Execute SQL Task.
In Execute SQL Task, I have an Insert query in which I want to pass the Database Name Dynamically i.e. passing it as a parameter.
Eg.
The query is --------- Insert into [?].[dbo].[DimCurrency] values( value1, value2, value3)
I want to pass this Database name using a user variable. But I am not able to do so.
What is the catch in this, Can anybody please help me out.
Thanks & Regards,
kapadia Shalin P.
View 5 Replies
View Related
Jun 22, 2006
Is it not possible to have table name as a parameter? For example have the SQL something like:
Delete From ? Where ID = ?
.. I get error:
[Execute SQL Task] Error: Executing the query "Delete From ? Where ID = ?" failed with the following error: "Must declare the table variable "@P1".". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
View 5 Replies
View Related
Jun 18, 2007
I have a stored proc which starts like this:
CREATE PROCEDURE dbo.AddAttachmentListItem
@ListID uniqueidentifier,
@AttachmentPath varchar (260),
@DeleteAttachmentAfterSend bit = 0
I have a Script task which generates a GUID and stores it in the variable @[User::AttachmentListId], which is of type System.Object since Guid wasn't an option. Following this is an Execute SQL task (with an OLE DB connection to an SQL Server 2000 database) whose SQL statement is
EXEC AddAttachmentListItem ?, ?, 0
My parameter mapping looks like this (variable name, direction, data type, parameter name, parameter size):
@[User::AttachmentListId], Input, GUID, 0, -1
@[User::AFilePath], Input, VARCHAR, 1, 260
When I execute my package I get the following error:
[Execute SQL Task] Error: Executing the query "EXEC AddAttachmentListItem ?, ?, 0" failed with the following error: "The type is not supported.DBTYPE_GUID". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
This worked earlier when the first parameter was an int and not a uniqueidentifier, but I reworked my design because the GUID was a better choice for what I was doing. Well, at least 'til I got to this point....
Any ideas?
View 6 Replies
View Related
Dec 31, 2007
Good day everyone,
I have a question concerning the Execute SQL task.
Problem Statement:
I have a table containing the following sample data.
Catalog_ID, Product_ID, IsBlocked
56789, 1, 0
56789, 3, 1
23567, 1, 0
23567, 2, 1
The data types of the fields are:
Catalog_ID: bigint
Product_ID: bigint
IsBlocked: bit
I have two variables called "old_catalog_id" and "new_catalog_id" with the following values:
old_catalog_id: 56789
new_catalog_id: 11111
Now, I would like to select all the recods, whose Catalog_ID fields equals the value in the variable "old_catalog_id" and insert identical recods with the "new_catalog_id" value.
The result of that operation on my sample records is:
Catalog_ID, Product_ID, IsBlocked
56789, 1, 0
56789, 3, 1
23567, 1, 0
23567, 2, 1
11111, 1, 0
11111, 3, 1
blue: selected fields
green: inserted fields
My Solution:
In order to realize this solution, I have created the following tasks on the Control Flow.
1. Create an Execute SQL Task for the selection. (Name: Selection Task)
2. Create a For-Each-Loop for iterating on the result set. (Name: Loop on results Container)
3. Create an Execute SQL Task inside the For-Each-Loop container for inserting the new records. (Name: Insertion Task)
Configurations and Problems:
1. Selection Task:
General Tab:
Result Set: Full Result Set
SQL Statement:
select Product_ID, IsBlocked
from MyTable
where Catalog_ID = ?
Parameter Mapping Tab:
Variable Name -- Direction -- Data Type -- Parameter Name
User:: old_catalog_version -- Input -- Large_Integer -- 0
Result Set Tab:
Result Name -- Varibale Name
0 -- User::FullResultSet (which has the Data Type: Object)
When I execute this task, I get no records.
Thus, I have hard-coded the value of Catalog_ID in the Sql Statement parameter. Now, I get the correct 2 records in the result set.
Question 1: What am I doing wrong in the Parameter Mapping?
2. Loop on results Container:
Collection Tab:
Enumerator: Foreach ADO Enumerator
ADO object source variable: User::FullResultSet
Enumeration mode: Rows in the first table
Variable Mappings Tab:
Variable -- Index
User:: old_prod_id -- 0 (Data Type of "old_prod_id" is Int64)
User:: old_isBlocked -- 1 (Data Type of "old_isBlocked" is Boolean)
When I execute the package, it fails with the following error message:
Error: 0xC001F009 at SQL Tasks: The type of the value being assigned to variable "User:: prod_id" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Thus, I have changed the data type of the variable "old_prod_id" to Object. Now, the package runs successfully.
Question 2: Why isn't the package accepting "Int64" as the data type of my variable, although the corresponding DB field has the type "bigint"?
3. Insertion Task:
General Tab:
Result Set: None
SQL Statement:
insert into MyTable
(Catalog_ID, Product_ID, IsBlocked)
values (?, ?, ?)
Parameter Mapping Tab:
Variable Name -- Direction -- Data Type -- Parameter Name
User::new_catalog_version -- Input -- Large_Integer -- 0
User:: old_prod_id -- Input -- Large_Integer -- 1
User:: old_isBlocked -- Input -- Variant_Bool -- 2
When I execute this task, it fails with the following error message:
Error: 0x0 at Insertion Task: The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Catalog2Context_CATALOGS". The conflict occurred in database "XS_EC_CCH_PEGXSAP2", table "eSearch4.CATALOGS", column 'ID'.
Well, the message implicitly states that the value of the variable "new_catalog_version" has violated the mentioned FOREIGN KEY constraint. But I have set a breakpoint and I saw that the value was set correctly. So, it seems that the Execute SQL Task is not able to read the value of the variable correctly.
Question 3: What am I doing wrong in the Parameter Mapping, which causes the task not being able to read the value of the variables correctly?
Thanks in advance for your help.
Regards,
Samar
View 3 Replies
View Related
Mar 3, 2007
hi
I would like to create a SSIS package that is going to be called by store procedures.
What i have done so far.
1) I created a Execute SQL task that come with this statement e.g. Seleect * from tblA where BD >= ? and BD =< ?
2) I save this package as a DTSX file and will called it from a proc.
My intention is to pass 2 values when i call the proc. What should do next? any guided tutorial or steps i would be happy. thanks
View 1 Replies
View Related
Aug 6, 2015
In temp table there rae data which start with 1 and 2.I want to select only those record which start with 1 Zone is a parameter to the Execute sql task in ssis package..I have created sample code to test when I am running my query I am not getting anything
create table #temp
( zoneid bigint
)
insert into #temp values(100000000000000000)
insert into #temp values(100000000000000000)
insert into #temp values(100000000000000000)
insert into #temp values(100000000000000000)
insert into #temp values(200000000000000000)
insert into #temp values(200000000000000000)
[code]...
View 6 Replies
View Related
Apr 26, 2008
I have a SSIS Execute SQL Task that calls a stored procedure with a date parameter. The text of the stored procedure is an "INSERT INTO .. SELECT ..." statement. When I run the text in Query Analyzer, it completes successfully. When I call the Stored Procedure, it executes but does not insert the data. Setting ByPass Prepare to True does not affect the outcome. I also used the query directly in the SQL task itself to no avail. Executing the query in Query Analyzer works. Any assistance would be greatly appreciated.
Dan
View 6 Replies
View Related
Feb 5, 2006
Hi all,
As part of the logging process for data input, I want to update two fields in a logging table. The first is a datetime, derived from looking up the maximum value in another table (the table I've just imported), and the second is an integer - the number of rows captured in a variable during the task.
I can do this in two separate Execute SQL tasks as follows:
Task 1 syntax
DECLARE @maxDate datetime
SELECT @maxDate = max(dtLastChangedDate)
FROM dbo.tblCancel_RAW
UPDATE dbo.tblLogging
SET PreviousFilterValue = CurrentFilterValue,
CurrentFilterValue = ISNULL(CAST ( @maxdate as varchar(25)),CurrentFilterValue),
DateSourceTableLastRead = GetDate(),
RowsReturned= -1
WHERE SourceTableName = 'cancel'
Task 2 Syntax, with the variable user::rowsimported mapped to parameter 0
UPDATE dbo.tblLogging
SET
RowsReturned= ?
WHERE SourceTableName = 'cancel'
However I cannot make this work with a single SQL statement such as
DECLARE @maxDate datetime
SELECT @maxDate = max(dtLastChangedDate)
FROM dbo.tblCancel_RAW
UPDATE dbo.tblLogging
SET PreviousFilterValue = CurrentFilterValue,
CurrentFilterValue = ISNULL(CAST ( @maxdate as varchar(25)),CurrentFilterValue),
DateSourceTableLastRead = GetDate(),
RowsReturned= ?
WHERE SourceTableName = 'cancel'
because no matter how I try to map the parameter (0,1,2,3,4 etc) the task fails.
Is this behaviour by design, is it a bug, or is there something I've missed?
Thanks as ever,
Richard
View 1 Replies
View Related
Oct 12, 2007
Hi, this might be a simple one, but I have been stuck on it for days. I am just getting into SSIS and have been muddling through it for the rest of this package but I am stuck on this. I am using this SQL Execute Task to run some lookup queries and then call the sp_send_dbmail stored procedure. I have this placed in a For Each loop container. I am using a SELECT DISTINCT Branch FROM table1 into an Object parameter, and passing that into the loop container. I am then using a Input Parameter into this SQL Execute Task of type String. I have run a Script task right before this step to ensure that the variable is populated and correct. Any assistance would be greatly appreciated!
Here is the SQL Execute Task :
DECLARE @SQL varchar(2400), @emaillist varchar(200),
@branchMgrEmail varchar(100), @officeMgrEmail varchar(100),
@branchMgrEmpNo varchar(5), @officeMgrEmpNo varchar(5), @subjectline varchar (100),
@Today varchar(10), @BranchNumber varchar(2)
SET @BranchNumber = ?
SET @Today = convert(char(8),getdate(),1)
SET @SQL = 'SELECT rtrim(CONVERT(char(10), PostedDate, 101)) AS Posted_Date,
CAST(Branch AS CHAR(2)) AS Branch,
CAST(Department AS CHAR(2)) AS Department,
CAST(InvoiceNumber AS CHAR(7)) AS Invoice_Number
FROM onbase.dbo.MHC_IncompleteRepairOrders
WHERE Branch = ' + @BranchNumber +
'AND HardCardCount = 0
AND WorkAuthCount = 0
AND QualityControlCount = 0
AND MiscDocsCount = 0'
SET @subjectline = @Today + ' - Repair Order Validation Notification for Branch #' + @BranchNumber
SET @branchMgrEmpNo = (SELECT branchempno FROM onbase.dbo.BranchMaster WHERE Branch = @BranchNumber)
SET @officeMgrEmpNo = (SELECT officeempno FROM onbase.dbo.BranchMaster WHERE Branch = @BranchNumber)
SET @branchMgrEmail = (SELECT empemailaddress FROM onbase.dbo.ActiveDirectory WHERE CAST(empno AS integer) = @branchMgrEmpNo)
SET @officeMgrEmail = (SELECT empemailaddress FROM onbase.dbo.ActiveDirectory WHERE CAST(empno AS integer) = @officeMgrEmpNo)
SET @emaillist = @branchMgrEmail + '; ' + @officeMgrEmail
BEGIN
EXEC msdb.dbo.sp_send_dbmail
@recipients = 'email@email.com',
--@recipients = @emaillist,
--@copy_recipients = 'email@email,
@attach_query_result_as_file = 0,
@subject = @subjectline,
@body = 'This email contains a list of Stuff
',
@query = @SQL,
@query_result_header = 1,
@query_result_separator = '|',
@query_result_width = 150,
@exclude_query_output = 1,
@profile_name = 'MAIL'
END
This is a copy of the ERROR message that I am receiving. Any suggestions?
failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Send email to Branch Mgr and Office Mgr
View 11 Replies
View Related
Oct 18, 2006
Hi!
I have a execute sql task to create and drop logins. I want to create/drop the ASPNET login, but I need to pass the domain using a parameter. So I mapped a parameter:
Variable name: User::serverName
Direction: Input
DataType: Varchar
Parameter Name:0
and the sql is the following:
CREATE LOGIN [?ASPNET] FROM WINDOWS
But I get the error:
Executing the query "CREATE LOGIN [?ASPNET] FROM WINDOWS failed with the following error: "Windows NT user or group '?ASPNET' not found. Check the name again.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
What am I doing wrong?
Thank you!
View 10 Replies
View Related
Nov 18, 2015
In my ssis 2012 package, I have a 'object' type variable with some table like records. I want to do some SQL operations like insert/update on the records in another table based on this 'Object' type variable records. Basically I want to use a MERGE statement with another physical table with the records in the 'Object' type variable.how to map/use the Object type variable in Execute sql task.I am not good in script task. How to utilize this Object variable in a Execute sql task?
View 9 Replies
View Related
