Hi,
Using SSIS, how is it possible to execute another ssis package and pass a parameter to it?
For example, I would like to have a sql code that runs the package say "d:sysapplCEMSSISCSA.dtsx" and pass a parameter of fileName because the CSA.dtsx package requires a filename.
Something like:
execute "d:sysapplCEMSSISCSA.dtsx", varfileName
Thanks
Dear all:
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
Many thanks,
Tomorrow
Hi.
I have a master package, which executes child packages that are located on a SQL Server. The Child packages execute other child packages which are also located on the SQL server.
Everything works fine when I execute in process. But when I set the parameter in the mater package ExecutePackageTask to ExecuteOutOfProcess = True, I get the following error
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Row Count" (5349).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Custom Split" (6399).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Data Source" (5100).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "DST_SCR Load Data" (6149).
The child packages all run fine when executed directly, and the master package runs fine if Execute Out of Process is False.
Any help would be greatly appreciated.
Thanks
Geoff.
Hello,
View 13 Replies View RelatedHi All,
Is there a way where I can execute ssis package depending on a condition. I need to have the ssis execute if there is a file in a given folder. For example if OEMCustomer.txt file is present in C:data, then execute the ssis package. Is that possible?
Thanks
Hi,
In the SSIS package, I have made the filename dynamic i.e. set as a variable.
How is it possible to do the same thing for the database name in the oledb connection?
I looked at the connectionString property for the OLEDB connection. ConnectionString looks long and the databasename is in this text.
Not sure how to make this databasename inside the connectionstring dynamic?
Thanks
tell me if iam doing it wrong. this is what i have in a txt file
CREATE TABLE #TEMP (COUNTRYCD CHAR(3), TABLEID CHAR(3), NOOFRECORDS INT)
INSERT INTO #TEMP
SELECT C_CD,T_ID,COUNT(REC_COUNT) FROM TABLE1
INSERT INTO TABLE2
SELECT A.CODE,B.TABLEID,GETDATE(),B.NOOFRECORDS F
FROM TABLE3 A INNER JOIN #TEMP ON A.CODE = B.COUNTRYCD
This is working in query window but not when i copy it into a file and call it from an execute sql task.
Hi,
Using SSIS, how is it possible to execute another ssis package and pass a parameter to it?
For example, I would like to have a sql code that runs the package say "d:sysapplCEMSSISCSA.dtsx" and pass a parameter of fileName because the CSA.dtsx package requires a filename.
Something like:
execute "d:sysapplCEMSSISCSA.dtsx", varfileName
Thanks
Hi,
I have created a SSIS package in sql server 2005.
When I execute the package directly it works properly.
The purpose of package is to create a dollar table in sql server destination and import data from sheet of an Excel file which is source.
Now I need to execute this package using vb 6.0 by creating an exe file.
If you have code regarding the same.
Kindly let me know.
Regards,
Srinivas Alwala
Hi,
I am a newbie to SSIS. I am trying to execute a simple package that I created from my ASP.Net application.
I get the error 'DTSER_FAILURE'. Can anyone help?
Thanks
Dear all,
I wrote this post in another category but the answer did not satisfied so that I'd like to know if really anyone has ever used or experienced with this possibility. No by .Net language rather than Vb 6.0 or ASP or even instanciacing DMO library.
Thanks a lot for your support,
Hello,
I am trying to execute an SSIS package, but i get the following error:
Cannot detach from one or more processes. [3676] The object invoked has disconnected from its clients. Do you want to terminate instead?
Actually it is a fact table and we lookup for the keys from dimension tables. I have to mention that we have many dimensions linked to our fact table.
I've got a sql script that I wish to automate. It's really simple and works great in Management Studio. I thought I could simply create an SSIS Integration Services project, place the code in an "Execute SQL Task" object and go, but I'm running into problems. Here's the code:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
use polk_vector
go
drop table gisadmin.TMS_Numbers_Not_Found_Tax_Database
go
select distinct TMS as 'Not found in Tax Database'
into gisadmin.TMS_Numbers_Not_Found_Tax_Database
from gisadmin.parcel_polygons
where not exists
(select *
from gisadmin.final_tax_data
where gisadmin.parcel_polygons.tms = gisadmin.final_tax_data.akpar#)
go
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I created a connection to the SQL database, then inserted the above code into the "Execute SQL Task" object. The query parsed correctly, but when I tried to "build" the query, it gave me the following error: "The USE polk_vector SQL construct or statement is not supported."
So I removed the 1st two lines and tried again. This time, I got this error: "The DROP TABLE SQL construct or statement is not supported."
Can anyone give me some guidance? I assumed I could simply stick the functioning query in and go, but there's obviously more going on than I realize.
Any advise will be much appreciated.
Thanks.
Kent Rothrock
Highland Mapping, Inc.
kentrothrock@hotmail.com
Dear Friends,
I have a SSIS project (You can see in my blog) with the main parameters, StartDate and EndDate.
How can I refresh this parameters? Where I save it?
Use a table in database with the fields Startdate and Enddate, and link it to my variables in SSIS?
Use the package configuration of SSIS?
Give me some tips!
regards!
Hello
I have researched this extensively and have seen a few similar posts on this site, and on the rest of the Internet, but have found nothing which solves my problem. This is absolutely crippling my productivity at work and I would greatly appreciate any advice anyone can suggest.
I have several packages which I need to run at quite regular intervals, and initially they worked absolutely perfectly. They ran quickly and efficiently. As time has passed though, seemingly at random, the pre execute phase of some of these has started to take unreasonable amounts of time. There have been times where I have left it on overnight and found the pre execute phase still at 0% the next morning. This is for queries which shouldn't take more than about 15 minutes to run.
However, seemingly at random, every so often one of the packages works absolutely perfectly. For example this afternoon one of these packages completed in 7 minutes, whereas this morning I had left it pre executing for 2.5 hours until I got tired of it and hit the stop button.
What affects the pre-execute phase and what sort of thing would cause this kind of behaviour? I work for a pretty large charity and I have had most of the IT team look into this at some point, and none of them can see any server activity which would explain it.
As an example of a package I am running which displays this behaviour, all that happens is an SQL statement runs, writes the results to a csv file and then emails me to say that it's finished. This is the SQL it uses:
select
REConstituentID as ID,
convert(varchar(10),DeceasedTickedDate,103) as dDate,
coalesce(Title1,'') as Title,
coalesce(FirstName,'') as FirstName,
Surname,
Gender,
AddressLine1,
AddressLine2,
AddressLine3,
AddressLine4,
City,
County,
PostCode,
coalesce(HomePhone,'') as Phone,
coalesce(convert(varchar(10),DeceasedDate,103),'') as DeceasedDate,
coalesce(
convert(varchar(10),(
select min(Date) from dbo.WH_ConstituentAttributes ca where ca.ConstituentID = WH_Constituent.ID and Type = 'Death Notification Date' and (left(Value,8) not in ('Experian', 'Ebiquita') or Value is null)
),103),
convert(varchar(10),(
select top 1 date from dbo.WH_Action where ConstituentID = WH_Constituent.ID and type = 'DM Remark' and ID in (select ActionID from dbo.WH_ActionAttribute where value = 'Deceased notification') order by date asc
),103),
'') as 'Date Notified of Death',
case
when exists (select top 1 null from dbo.WH_ConstituentAttributes ca where ca.ConstituentID = WH_Constituent.ID and Type = 'Death Notification Date' and Value = 'Golden Charter: Funeral Plan Confirmed')
then 1
when exists (select top 1 null from dbo.WH_Action where ConstituentID = WH_Constituent.ID and Category = 'Phone Call' and type = 'DM Remark' and ID in (select ActionID from dbo.WH_ActionAttribute where value = 'Deceased notification'))
then 3
else 5
end as 'Notification Method Code'
from
WH_Constituent
where
Deceased = 'Yes'
and AddressLine1 is not null
and PostCode is not null
and Country = 'United Kingdom'
and DeceasedTickedDate >= {d '2006-09-20'}
and not (
exists (
select top 1 null
from dbo.WH_ConstituentAttributes ca
where
ca.ConstituentID = WH_Constituent.ID
and Type = 'Death Notification Date'
and left(Value,8) in ('Experian', 'Ebiquita')
)
and not exists (
select top 1 null
from dbo.WH_ConstituentAttributes ca
where
ca.ConstituentID = WH_Constituent.ID
and Type = 'Death Notification Date'
and coalesce(left(Value,8),'') not in ('Experian', 'Ebiquita')
)
and not exists (
select top 1 null
from dbo.WH_Action
where
ConstituentID = WH_Constituent.ID
and type = 'DM Remark'
and ID in (
select ActionID
from dbo.WH_ActionAttribute
where value = 'Deceased notification'
)
)
)
There are no lookups, fuzzy groupings or anything else even slightly complicated.
Any help would be great!!!
Thanks
Iain
Is it possible to CREATE a database using SSIS and name it using a variable / parameter mapping.
if not, how can I use SSIS to take a username from a database table and create a database with that name?
thanks is advance....b
A stored function is created in MySQL Server running on Linux with following info:
mysql > delimiter $$
mysql > CREATE FUNCTION GetMaxKeyForSampleTable()
-> RETURNS DOUBLE READS SQL DATA
-> BEGIN
-> RETURN (SELECT MAX(MJD) FROM tblSampleTable);
-> END;
Query OK, 0 rows affected (0.02 sec)
mysql > delimiter ;
***The above function is successfully stored in the database.
"Execute SQL Task" add-in module has following info:
Name: Execute SQL Task
Description: Execute Task
TimeOut: 0
CodePage: 1252
ResultSet: Single row
Connection Type: ADO.NET
Connection: .MySQLServerLinux
SQLSourceType: Direct Input
SQL Statement: SELECT GetMaxKeyForSampleTable() AS MaxKey
IsQueryStoredProcedure: True
ByPassPrepare: False
Result Set:
Result Name Variable Name
MaxKey User:_dMaxKey
The following steps are taken:
1. Clicked "Parse Query" push button which results a pop-up dialog box -
"The query parsed correctly".
2. Clicked "OK" button.
3. Right clicked "Execute SQL Task" add-in module.
4. Selected "Execute Task".
"Execute SQL Task" changed its color from white to yellow to red
which means excution failed.
Please help me to figure out what should be done to make the excution successful.
Thank you very much in advance.
Paul Cho
Any one has code snippet for executing SSIS packge using VB(6.0)
View 4 Replies View RelatedHi!
I was following this article http://www.codeproject.com/useritems/Execute_Package_by_C_.asp to execute list of SSIS packages via vb.net. I created a windows application in server A copied the exe file in server B. the SSIS package is in server B. I deployed the package and it runs file vis integration server. below are my codes. everytime i run the exe in server B. I can see the list of packages but when i hit execute button i get error msgs that says "failure" I am not sure how to get more error out of it. I am not sure whats causing this error.
----------------------------
Imports System.Data.SqlTypes
Imports System.Data.SqlClient
Imports Microsoft.SqlServer.Management.Smo
Imports Microsoft.SqlServer.Management.Smo.Agent
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.SqlServer.Management.Common
Public Class Form1
Dim app As New Microsoft.SqlServer.Dts.Runtime.Application()
Dim pInfos As PackageInfos = app.GetPackageInfos("\", "SQLKEV", "", "")
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
For Each pInfo As PackageInfo In pInfos
If pInfo.Name <> "Maintenance Plans" Then
ComboBox1.Items.Add(pInfo.Name)
End If
Next
End Sub
Private Sub btnExec_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExec.Click
Dim app As Microsoft.SqlServer.Dts.Runtime.Application
app = New Microsoft.SqlServer.Dts.Runtime.Application()
Dim pkgResults_Sql As DTSExecResult
Dim pkgIn As New Package()
Try
pkgIn = app.LoadFromSqlServer("" + ComboBox1.SelectedItem.ToString().Trim(), "SQLKEV", "", "", Nothing)
pkgIn.PackagePassword = "password21"
pkgResults_Sql = pkgIn.Execute()
MessageBox.Show(pkgResults_Sql.ToString())
Catch ex As Exception
MsgBox("this is an exception" + ex.ToString)
End Try
End Sub
End Class
----------------------------
please help
Greetings,
I have an SSIS package composed of several sequence containers; each of these executes fine if I individually right-click them and select "Execute" - however, when I press F5 (but it did in the beginning) none of them executes :|
Any ideas why this happens?
Thanks in advance :)
Hi,
I have created four package, it should executed sequencely one by one. Is it there any option like sequencer in Data Stage for achive this requirement? I want to execute these package one by one using SSIS. could you help on this requirement?
Thanks & Regards
S.Nagarajan
Hi,
I've an application developed in VB 6.0. Now I had created a SSIS package which is used to import data from an Excel file. This package has a variable "App ID".
Now I need to execute the package from VB application. Also I need to pass the value for the variable "App ID".
Please help me in this regard.
Hi All,
I would like to write a small application for execute a SSIS package manually, but i got a error message as following:
Coding:
Dim oPkg As DTS.Package2
oPkg = New DTS.Package2
'Error Message Here
oPkg.LoadFromSQLServer("SQL2005", "sa", "abc", DTS.DTSSQLServerStorageFlags.DTSSQLStgFlag_Default, Nothing, Nothing, Nothing, "AccessImport")
oPkg.Execute()
oPkg.UnInitialize()
oPkg = Nothing
Error Message:
The specified DTS Package ('Name='AccessImport';ID.VersionID = {[not specified]}.{[not specified]}') does not exist.
So what is the problem here?
Thank a lot.
Laputa
Hi
Got a problem with 'Execute SQL Task'. When I click to open the 'Execute SQL Task Editor', add a connection then click on 'Parameter Mapping' then click 'Add' button the window disappears. I have re-installed visual studio and applied SP1 but the problem is still there.
Any Ideas?
Nickie
Please anyone help me with my question
How do I execute a stored Procedure using SSIS ?
I have a stored procedure in SQL SERVER 2005 database that I need to execute using a SSIS package using Execute SQL Task from Toolbox in Visual studio 2005
Thanks,
George
A developer needs to execute an SSIS package from a stored procedure and I do not want to enable xp_cmdshell on SQL 2005.
One suggestion is to have the application invoke dtexec on the client PC, but this would cause the package to be executed on the client and also requires some SSIS components be installed on each client.
Another idea is to configure a Windows Service to execute dtexec, but I do not know the risks of this approach. Any thoughts?
Thanks, Dave
Looking for steps to execute the package from CMD ?
View 1 Replies View RelatedIs there a programatic way to execute an SSIS package (passing the appropriate parameters) from within a stored procedure. I've seen some examples using xp_CmdShell, but would rather not go that route if possible
View 1 Replies View RelatedHello, is it posssible to execute SSIS packages from ASP.NET ? Which code should I Use?
View 4 Replies View RelatedHello :
On my server, I did not install the SQL Server 2005, I have SQL server 2000, thus I did not install Integration Services.
I want to execute one package by line of command DTExec.
I need what to execute this command without installed SSIS?
Thank you.
I need to execute a SSIS package from a ".vbs" file on a computer that don't have SSIS installed on it.
Thank You
Hey Folks,
I've got here a strange Problem. If I try to execute the SQL Server Agent Job, that executes my SSIS Package, it fails. The job succeedes when I run the Job as the Proxy, that maps on the User, that has deployed the Package, or when I run the Job under an System Administrator Proxy. Now my Question - how must I set up an Service-Account, which is no Admin and not has deployed the Package?
I already know, that the User has to be in the sysadmin role, and in all msdb SQLAgent*
Thanks and greez
Karsten
1. I am trying to load data from AS400 DB2 to SQL Database using integration services.
2. I am using microsoft ole DB for Db2 driver to pull data from AS400 and using native SQL driver to load data into MS SQL 2005.
AS400 View to pull this data is---
SELECT UPPER(CHAR(SVSGVL)) AS AccountID, UPPER(CHAR(SVLDES)) AS AccountDesc,
INT(SVSGTP) AS AccountTypeID, INT(SVTR) AS TranslationMethodID, INT(SVDEF) AS AccountValue, INT(SVRM) AS RemeasurementID
FROM V820PRMF.GSVL01
WHERE (UPPER(SVSGMN) = 'ACCT')
ORDER BY AccountID
AccountID String[DT_STR] Lenhth-16
AccountDesc String[DT_STR] Length -30
All other column is int.
MS SQL 2005 is were data to be loaded. Table Info.
CREATE TABLE [dbo].[DimAccount](
[AccountID] [varchar](50) NOT NULL,
[AccountDesc] [varchar](50) NOT NULL,
[AccountTypeID] [int] NOT NULL,
[AccountValueID] [int] NOT NULL,
[TranslationMethodID] [int] NOT NULL,
[RemeasurementMethodID] [int] NOT NULL,
CONSTRAINT [PK_DimAccount_1] PRIMARY KEY CLUSTERED
(
[AccountID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
Integration Package
[Destination - Account [34]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unspecified error".
[Destination - Account [34]] Error: There was an error with input column "ACCOUNTID" (284) on input "Destination Input" (47). The column status returned was: "The value violated the integrity constraints for the column.".
[Destination - Account [34]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Destination Input" (47)" failed because error code 0xC020907D occurred, and the error row disposition on "input "Destination Input" (47)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Account" (34) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.