I want to create a Trigger that will run every 5 minutes.
This trigger would actually run a Stored Procedure named say "SP_SetRooms".
This SP will in turn run and andupdate the rooms table.
Would anyone know how to help me get started on creating a Trigger with the info I've provided?
Thank you,
Dharmendra parihar
I have trigger, but not execute somedata because insert few row in every second. I use java to insert data to SQL server 2005. Data inserted to a table but not executing trigger for some data.
For example 100 data every second inserted to a table.
If insert data one by one to a table trigger fires success.
Please Help me.
My table as data as follow,
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[table_Data]') AND type in (N'U'))
DROP TABLE [dbo].[table_Data]
GO
/****** Object: Table [dbo].[table_Data] Script Date: 04/21/2015 22:07:49 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[table_Data]') AND type in (N'U'))
[code].....
I have a Stored Procedure that inserts and updates various information to various tables. I have a Begin Tran and Commit Tran at the beginning and end of my procedure.
Now on one of these tables that I'm inserting I want to put an After Insert Trigger.
When will the Trigger execute?
Will it execute when the actual Insert Into statement is ran? If so, what happens if the Stored Procedure bombs further down the code? Does the Rollback affect the changes in other Tables that the Trigger has made?
Or will it execute at the commit? Will the inserted tables still hold my newly inserted rolls from the Triggered Table after several other insertions and updates?
I hope all of this makes some sort of sense.
Thanks in advance,
Tim
Hi,
is there a way I can execute a DTS from a trigger without using xp_cmdshell?
I prefer not to open this procedure to the programmers here, and I'm looking for a workaround.
any suggestions?
hello all
actually there is a problem i want to execute a trigger at very first day of every month,so that some records of a table can be updated at very first day of every month,how it will be executed automatically at every first day of month
I wanted to execute a proc whenever a new login or a login is droped is created on the server. I was trying for CREATE_LOGIN in the following code but not able to capture the loginname and pass it to the proc.
Server object Trigger:-
USE [master]
GO
/****** Object: DdlTrigger [LoginCreateTrigger] Script Date: 7/20/2015 3:41:06 AM ******/
SET ANSI_NULLS ON
GO
[code]...
I have never dealt with triggers before, I was wondering if it is possible to create a trigger that executes a script which transfers data from table1 to table2, upon table1 recieving new records.
I have the script written to transfer the data, I just dont really know the syntax of trigger creation. Any input would be great, thanks.
Hi all
I've Created a Trigger statement and tried to execute this using ExecuteNonQuery.but it shows the following error
Incorrect syntax near 'GO'.
'CREATE TRIGGER' must be the first statement in a query batch.
if i start with Create Trigger statement it show "Incorrect Syntax near Create Trigger".
the following is the trigger statement which i've generated in C#
Can anyone help me?
thanks in advance
sri
IF EXISTS (SELECT name FROM sysobjects WHERE name = 'SampleTrigger' AND type = 'TR')
DROP TRIGGER SampleTrigger
GO
CREATE TRIGGER SampleTrigger
ON dbo.sample
AFTER INSERT
AS begin
SET NOCOUNT ON
DECLARE @RID as int
DECLARE @email AS nvarchar(50)
SELECT @email= i.email from inserted i
DECLARE @Name AS nvarchar(50)
SELECT @Name= i.Name from inserted i
DECLARE @Address AS nvarchar(50)
SELECT @Address= i.Address from inserted i
insert into Register(ServerName,DatabaseName,TableName) values('Sample','SamDatabase','SamTable')
SELECT @RID = @@Identity
insert into TableFields(RID,FieldName,FieldValue) values(@RID ,'Name',@Name)
insert into TableFields(RID,FieldName,FieldValue) values(@RID ,'Address',@Address)
insert into TableFields(RID,FieldName,FieldValue) values(@RID ,'email',@email)
end
I am situation, where we have a table named as Project, columns for the table as follows:
Code:
------------------------------------------
ID | ClientCode | ProjectName
------------------------------------------
1 | AAA | Dubai Airport Phase I
2 | AAA | Dubai Airport Phase II
3 | ARC | Salala
4 | MIZ | UMBC Building
------------------------------------------
Now my task was, whenever a project name and other details being created, then a Folder will be created in a server itself in the path E:ProjectFolder in following way:
E:ProjectFolderAAAAAA1
E:ProjectFolderAAAAAA2
E:ProjectFolderARCARC3
E:ProjectFolderMIZMIZ4
You can see here Folder and sub-folder is being created with that following project - client code & ID
I used following trigger to do the same:
Code:
CREATE TRIGGER [dbo].[CreateFolderName]
ON [dbo].[Project]
after INSERT
AS
SET NOCOUNT ON
BEGIN
declare @chkdirectory as nvarchar(4000), @folderName varchar(100), @mainfolderName varchar(100)
declare @folder_exists as int
SET @mainfolderName = (SELECT ClientCode AS Project FROM INSERTED)
SET @folderName = (SELECT (ClientCode + cast(ID as varchar(10))) AS Project FROM INSERTED)
set @chkdirectory = 'E:ProjectFolder' + @mainfolderName + '' + @folderName
[code].....
This worked like a charm, now my next task is using same trigger, I have to create a BAT file inside that SubFolder - T-SQL for creation of BAT File as follows:
Code:
DECLARE @FileName varchar(50),
@bcpCommand varchar(2000)
SET @FileName = REPLACE('E:ProjectFolder[red](select ClientCode from INSERTED)[/red][red](select ClientCode + cast(ID as varchar(10)) from INSERTED)[/red]xcopy_'+ (SELECT cast(ID as varchar(10)) FROM INSERTED) +'.bat','/','-')
SET @bcpCommand = 'bcp "[red]SELECT 'xcopy "E:ProjectFolder' + clientCode + '" "10.0.0.35ProjectFolder" /T /E /I' FROM INSERTED[/red]" queryout "'
SET @bcpCommand = @bcpCommand + @FileName + '" -U SQLServerUsername -P SQLServerPassword -c'
EXEC master..xp_cmdshell @bcpCommand
Here I am not understanding how to insert the above T-SQL in the Trigger as well as the above T-SQL is not right, what's wrong in this?
Last query that will be included in the trigger is to execute the newly created bat file.
Hi,We have been using ADO and the AddNew method for a long time as a meansto add records to the database. It has always worked fine - no problem.But - we recently started using INSERT triggers that simply call a fewstored procs (they're actually SSNS stored procs that send new eventinfo to notification services). Anyway, these triggers do not seem tofire at all! If I execute an insert command manually from QueryAnalyser, no problems. But the trigger does not fire at all from myapplication!Does anyone know why this could be? For info, my connection string usedby the ADO connection object looks like this: Provider=SQLOLEDB.1;DataSource=XXX;Initial Catalog=YYYAnd my AddRecord ADO code looks like this:With rs.Open sSQL, ConnectionString, adOpenKeyset, adLockOptimistic,adCmdTable And adExecuteNoRecords.AddNewAm I mnissing something obvious here? Any help appreciated!
View 1 Replies View Related
Hi,
Is it possible to run trigger from a stored procedure?
Hi
I have a situation below
Table : tblStatus
Column1 : Event_Desc
Column2 : Flag
Once the flag is set to "T", I want to trigger a SSIS package named "PerformAction.dtsx"
How to write a table trigger for this.
With Regards,
Madhu
Hi,
I have a 'Execute SQL Task' in my 'control flow', my 'Execute SQL Task' will return a value which I am assigning to a variable. Based on the value of the variable, I need to control my other flows. If the variable's value is 1 then I should invoke a dataflow, else I should write a failure error message in event viewer. Please could someone provide some inputs on how this can be done.
'Execute SQL Task' ----->value 1 ------>data flow to be executed
'Execute SQL Task' ----->value !=1 ------> write some error message in the event viewer and no tasks should be executed after that.
Thanks
raj
Suppose you have a simple DML "execute as..." trigger that looks like this:
CREATE TRIGGER dbo.myTrigger
ON dbo.myTable
WITH Execute As Owner
AFTER INSERT
AS
[code]...
which runs as "owner" so that the user inserting into "myTable" won't have the privs to edit the audit table.How does one capture the identity of the user whose insert statement caused the trigger to fire? I've tried "current_user" and "system_user" without success when "execute as ..." is used: they each return a value not related to the identity of the user running the original insert.without an "execute as" clause, what prevents a user from adding to or editing the audit table directly?
i did "Linked server" between To Servers , and it's Working.
---------------------------
For Example :
Server 1 =S1.
Server = S2.
i create table in S1 : name = TblS1
i create same table in S2 : name TblS2
and i create trigger(name tr_cpD) From S1 in TblS1 For send data To TblS2 in S2
/****************** trigger Code ***************
CREATE TRIGGER dbo.tr_cpD
ON dbo.TblS1
AFTER INSERT
AS
BEGIN
SET NOCOUNT ON;
insert into [S2].[dbname].[dbo].[TblS2] Select ID,Name from insertedEND
**************************************************
result is :
Msg 7399, Level 16, State 1, Procedure tr_cpD, Line 14
The OLE DB provider "SQLNCLI" for linked server "S2" reported an error. The provider did not give any information about the error.
Msg 7312, Level 16, State 1, Procedure tr_cpD, Line 14
Invalid use of schema or catalog for OLE DB provider "SQLNCLI" for linked server "S2". A four-part name was supplied, but the provider does not expose the necessary interfaces to use a catalog or schema.
how i can execute this trigger
Hi,
I have a job where the first step starts and checks for a condition. If its not true, I want it to reset itself and start again in 10 minutes. I'm using sp_stop_job and sp_update_jobschedule and, initially, it looks like it works. But since it's a Daily job, the 'Next Run Date' increments to the following day. Even though I'm using sp_update_jobschedule to keep the active_start_date as the same day, it still increments. I've tried updating sysjobschedules directly, but get the same results.
Any thoughts much appreciated! Here's my code:
USE msdb
--This is the part that goes in the job step
--and increments the next_run_time if the condition is true.
If
(Select count('x') from mytable (NoLock)
Where PublicationDate > getdate()) < 1
BEGIN
Declare @ActiveStartDate int
Declare @ActiveStartTime int
Select @ActiveStartDate = active_start_date from msdb.dbo.sysjobschedules (NoLock)
Where schedule_id = 61
Select @ActiveStartTime = active_start_time from msdb.dbo.sysjobschedules (NoLock)
Where schedule_id = 61
EXEC msdb.dbo.sp_stop_job @job_name = 'Owners'
Select @ActiveStartTime = @ActiveStartTime + 1000
EXEC sp_update_jobschedule @job_id = '46C074D4-908D-46AE-8B0C-A23E3AD4A4F6',
@name = 'Daily',
@active_start_date = @ActiveStartDate,
@active_start_time = @ActiveStartTime
End
I am trying to develop a sql statement that will create a recordset of the min (or max) values in x minute increments over a period of time.
e.g. over a period of 7 days, I have data that was collected in 1 minute intervals. I need to know the min (or max) value in each 10 minute interval over that same period of time.
Is there an efficient way of doing this?
Hi,
I need to write a query whioch give me count on
0-15 minutes and then from 0-720 minutes.
I don't know how to group it.
Any help appreciated.
TIA
hey all, i need to find the ratio of difference in 2 datetime variables and the difference of another 2 datetime vars. I figured the best way to do it is to convert the difference in both numerator and denominator to number of minutes.
can anyone help ??
:shocked: hi,
I want to use CURRENT_TIMESTAMP - 5 minutes in a select and where clause.
I have tried using
CURRENT_TIMESTAMP - 0.004 AS [Time_-6]
But this is not a round off to a whole minute
Also tried
CURRENT_TIMESTAMP, dateadd(minute, datediff(minute, 0, CURRENT_TIMESTAMP) / 5 * 5, 0)
But this will not do wholes seconds e.g
CURRENT_TIMESTAMP = 10.03.33
CURRENT_TIMESTAMP, dateadd(minute, datediff(minute, 0, CURRENT_TIMESTAMP) / 5 * 5, 0) = 10.00.00
Can anyone help??
Hello all !
I am runing from .NET application an SQL Query
it normally return the rows in 10 seconds
but time to time the application turn 2 or 3 minutes and nearlly crash (or crash)
with exactly the same datas in database
what can be the reasons ?
thank you
I have a result that comes out in number of seconds, but need to see it converted to minutes and hours and seconds. Is there a convert function that would do this?
Thanks,
Dan
how can i get my date minus 15 minutes in sql?
is there a dateadd function?
I have this script that runs on a LOGGING database and find hourly requests for a particular firm.
The date format is "2013-08-19 13:44:50.177"
How can I group it by every 15 mins?
select
LocalDate [date],
LocalHour [Hour],
count(*) [requests],
avg(web_request_duration) [avg response time],
min(web_request_duration) [min response time],
max(web_request_duration) [max response time]
[Code] ....
I am using below query to get the today date and time(2 hrs more than actual time)
select dateadd(HOUR, 2, getdate()) as time_added
the result of above query is "2014-10-28 13:19:09.343" but I want time up hours like shown below
"2014-10-28 13:00"
Consider a table that holds Internet browsing history for users/machines,date/timed to the minute. The object is to tag all times that are separatedby previous and subsequent times by x number of minutes or less (it couldvary, and wouldn't necessarily be a convenient round number). This willenable reporting "active time" for users (a dubious inference, but hey).There are a lot of derivative ways of seeing this information that might begood to get to. What's the fist and last of these sets of times? Whatpercentage of a given period is spanned by active times, and not? What isthe average duration of such periods? What is the average interval betweenweb hits during such periods? During other times?Blah, blah. The basic problem is my principal problem. I don't have muchexperience with cursors, but from what I understand it would be very goodindeed to spare them, given the number of records I anticipate workingwith.I'd be glad of any pointers.--Scott
View 29 Replies View Related Hi,
the SQL DB freezes and no one can access the DB for 5 or 10 minutes. Even select queries don t execute, nothing is displayed.
Until we kill the process id that s blocking in the sql activity monitor, only then the DB is released and people can work again.
What does it mean that no query executes until we kill the processes ID? what could it be?
Also, recently we created indexes and ran tuning adviser, is it possible that the creation of indexes cause the freeze of a DB? is that possible?
Thanks a lot for your help
Hi,
I have SQL 2005 full version installed a remote server and when I start my computer I can connect to the database from SQL Managment Studio and a program I'm making. After about 15 minutes I find that I cannot connect using both programs, but if I enter the servers IP address using Managment Studio I can connect (this does not happen with the program I'm making). I have to log of my computer before I can connect again.
Anyone having the same problem or how to fix it??
Thanks
PQSIK
Dear all:
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
Many thanks,
Tomorrow
I'm looking for a way to refer to a package variable within any
Transact-SQL code included in either an Execute SQL or Execute T-SQL
task. If this can be done, I need to know the technique to use -
whether it's something similar to a parameter placeholder question
mark or something else.
FYI - I've been able to successfully execute Transact-SQL statements
within the Execute SQL task, so I don't think the Execute T-SQL task
is even necessary for this purpose.
Hi.
I have a master package, which executes child packages that are located on a SQL Server. The Child packages execute other child packages which are also located on the SQL server.
Everything works fine when I execute in process. But when I set the parameter in the mater package ExecutePackageTask to ExecuteOutOfProcess = True, I get the following error
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Row Count" (5349).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Custom Split" (6399).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Data Source" (5100).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "DST_SCR Load Data" (6149).
The child packages all run fine when executed directly, and the master package runs fine if Execute Out of Process is False.
Any help would be greatly appreciated.
Thanks
Geoff.
I've the following simple code bound to a button on a Web page
string time = (string)Cache["KEY"];
if (time == null)
{
SqlConnection sqlConnection = new SqlConnection(@"Server=BIZYUSUFSQL2005;Database=Deneme;User Id=sa;Password=;");
SqlCommand command = new SqlCommand(@"select KOLON1 from dbo.CACHE", sqlConnection);
sqlConnection.Open();
SqlCacheDependency dependency = new SqlCacheDependency(command);
time = System.DateTime.Now.ToString();
Cache.Insert("KEY", time, dependency);
command.ExecuteNonQuery();
sqlConnection.Close();
}
return time;
This code has to return the time value from cache. And when a record is inserted into the CACHE table, the cache item has to be invalidated and the new time value has to be returned.
The code works properly for 2-3 minutes. But when there is no activity for 5 minutes, the cache invalidation does not work anymore.