Executing A Stored Procedure As Job Step - Performance Problem
Aug 6, 2001
When I start my stored procedure from Query Analyzer it ends in 1 h.
I have created a job consisting of 1 step - the same procedure. If I start the job from Enterprise Manager it ends after some 10 h.
What can I do to get the same performance?
I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query window
Please see the image through this url http://kyxao.net/127/ExecutionProblem.png
Hi,I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query windowPlease see the image attached http://kyxao.net/127/ExecutionProblem.png Any ideas for this issue?Thanks a lot Jalijack
I'm having trouble using VS2005 to remotely debug stored procedures in SQL Server 2005.
After setting a breakpoint, when I select "Step into Stored Procedure", I am NOT prompted to enter parameter values. I'm taken straight to the debug window, which is titled "Running" but nothing is happening. The breakpoint icon changes to a translucent icon with a yellow exclamation mark. The mouseover tooltip says:
"The breakpoint will not currently be hit. Unable to bind SQL breakpoint at this time. Object containing the breakpoint not loaded".
If I choose "Exceute" instead of "Step into Stored Procedure", I'm prompted to enter parameter values and everything works as expected.
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
I cannot seem to get this to option to come up without having the full blown studio installed.
Is there something else that needs to be configured on the database before having this option enabled? I have enable clr (which is semi-unrelated to good ol' fashion stored procedure debugging) in the surface area configuration manager, but still no luck.
I am using SQL Server 2005 Standard Edition. I can get this feature working w/ no prob when I have the full blown Visual Studio Professional version installed, but not with just SQL Server - Futher insight would be helpful.
I am running a stored procedure as a job step and in the stored procedure I use return to pass one of several possible values when there is an error in processing (not an system error) so that the job step will fail. However, even when I return a non-zero value using return the job step completes as successful. What should I be doing so that the job step picks up the non-zero value and then indicates the step failed?
Can anybody explain how to do debug a stored procedure from SQL Query Analyser.
When i tried opening Query Analyser and pressing F8 i am able to see Object Browser on left side, i selected the d/b and expanded it then i selected a stored procdure by right click of mouse. I selected "Debug".
It shows me alert msg "SQL Debugging may not work properly if you log on as 'Local System Account' while SQl server is configured to run as a service. You can open Event Viewer to see details." DO U WISH TO CONTINUE- I selected "YES"
I am able to see 3 split windows on right side and GO, Toggle, Untoggle are enabled BUT Step Into, Step Over, Step Out...Stop debugging are disabled at menu bar.
The 1st right split window shows the proc code, 2nd split window shows Local-Global-Callstack none of them shows any values(blank), 3rd split window shows records(result) and @RETURN_VALUE = 0 message
I had Toggled at each and every line of the procedure in 1st split window still it doesnt respond anything.
What might be the problem, how to solve it do i need to give any permissions.
i tried logging from wind Authentication and also from Sql Authentication (sa/sa), still same problem occurs. By the way i am using SQL Server 2000.
I'm using Sql Server 2005, and I am receiving an error when I attempt to run a stored procedure and I have no clue why. Can someone please help?
I receive an error when I attempt to execute the following stored procedure: exec INSERT_OBJ 1234, 'Name', 123, NULL, GetDate(), 'system'
The error I receive is: "Incorrect syntax near ')'" All of the values are valid values and valid types.
Is it possible to be an error within the stored procedure itself? This error makes it sound like the syntax of my attempt is incorrect, thus it never gets ran.
I am trying to execute a "ServerB" Stored Procedure in "ServerA".This SP is in Multiple DB's in ServerB. I am trying to use Openquery and Dynamic SQL to do that.But I am having issues. Intially i am trying to pass just one DBname as parameter..if it returns values then i can use cursor or other options to retrieve for multiple DB's Please Help!!!
Hi, Can anyone tell me how to execute a stored procedure using vb6.0.I am able to connect to sqlserver from my application.Simple select queries are working.
The stored procedure contains a select statement at the end.I want to get that as the resultset in vb6.0.How do I do this.
I couldn't debug SQL Server by "Step into Stored Procedure" on Server Explorer of VS2008 (or VS2005) to SQL 2005 Developer on remote Windows Server 2003 machine, it allway issue exception "Unable to start T-SQL Debugging. Could not attach to SQL Server process on 'Server'. Click Help for more information"
1) The environment: The Client: Windows XP SP2 (WORKGROUP) Visual Studio 2008 (or VS2005)
The SQL Server Machine: Windows 2003 Server Sp1 (DOMAIN) SQL Server 2005 Developer
2) User account and Permission login: I create the same user account for both Client and Domain Server with the same password, i also add that user to "Administrators" group in both machine.
At the SQL Server on Server machine, i added that account to ServerSecurityLogin with 'sysadmin' role already
3) Connection and authentication: I used "Windows Authentication" for my connection to SQL server, and i checked sure my account of the connection by SQL command
SELECT SYSTEM_USER, IS_SRVROLEMEMBER ('sysadmin')
4) Firewall: I checked firewall like MSDN helping (i also tried to test by turn off firewall in both machine)
5) Visual Studio Remote Debugger: I read "How to: Enable SQL Server 2005 Debugging" on MSDN with comment "The SQL Server can run on the same machine as the application or on a remote machine. If you are debugging T-SQL code only, then no remote setup is required." so i didn't config Visual Studio Remote Debugger any thing.
Note: If i "Step Into Store Procedure" at Server locally, it works okey, so on at my PC client locally. But if i move debugging from my client to my Server, it occur error "Unable to start T-SQL Debugging. Could not attach to SQL Server process on 'Server'. Click Help for more information"???
If i execute store procedure on Server Explore, it works okey!
Hi I have a stored procedure in SQL Server 2005. It make a backup of a database and restores it to a different name.I use ASP.NET and Framework 1.1.It works really fine when I use SQL Server 2000. But!When trying to do the same thing on SQL Server 2005, the database seems to be created "half way" I can see that the database is created, but after the name is the text Restoring....It never finish restoring.... and nothing shows in the server logs. Any ideas?Differences between SQL Server 2000 and SQL Server 2005 that I must be aware of?Priviliges?ConnectionString parameters?Drivers? I'm using .NET Framework 1.1ODBC (SQL Native Client) Here is the Store procedure code:set ANSI_NULLS ON set QUOTED_IDENTIFIER ON go ALTER PROCEDURE [dbo].[CreateProjectDataBase] @AFModelDatabaseProject varchar(200), @TemplateDbBackupFileAndName varchar(200), @DatabaseName varchar(200), @DataFilePathAndName varchar(200), @LogFilePathAndName varchar(200) AS
BACKUP DATABASE @AFModelDatabaseProject TO DISK = @TemplateDbBackupFileAndName WITH INIT RESTORE DATABASE @DatabaseName FROM DISK = @TemplateDbBackupFileAndName WITH MOVE 'AdressTNG_Project_Data' TO @DataFilePathAndName, MOVE 'AdressTNG_Project_Log' TO @LogFilePathAndName
and here is how it is called from within .NET:this.odbcCreateDataBaseCommand.CommandType = System.Data.CommandType.StoredProcedure; this.odbcCreateDataBaseCommand.Parameters["@AFModelDatabaseProject"].Value = afModelDataBaseName;this.odbcCreateDataBaseCommand.Parameters["@TemplateDbBackupFileAndName"].Value = TemplateDbBackupFileAndName; this.odbcCreateDataBaseCommand.Parameters["@DatabaseName"].Value = dbName;this.odbcCreateDataBaseCommand.Parameters["@DataFilePathAndName"].Value = DataFilePathAndName; this.odbcCreateDataBaseCommand.Parameters["@LogFilePathAndName"].Value = LogFilePathAndName;this.odbcCreateDataBaseCommand.CommandText = "{ CALL CreateProjectDataBase(?,?,?,?,?) }"; this.odbcCreateDataBaseCommand.ExecuteNonQuery(); RegardsTomas
We have a test and production environment. After transfering some tables from test to prod and all stored procedures using those tables. We get an error when executing those stored procedures: " DB-library: Possible network error: Bad token from SQL Server: Datastream processing out of sync. Net-library error 0: DB-libray Process Dead - Connection Broken. " When we execute the stored procedure with 1 parameter less we get a parameter missing error. Then we execute the stored procedure again and everything is allright? Has anyone experienced this before? If so, please help. SQlServer 6.50.201
How Can i Execute a result from a StoredProcedure... I got a sp that generates drop index and pk from all tables in the DB..
I got this results from running (sp_dropallindex) like this:
ALTER TABLE Table1 DROP CONSTRAINT PK_Table1 GO ALTER TABLE Table2 DROP CONSTRAINT PK_table2 GO DROP INDEX table1.index1 GO DROP INDEX table1.index2 GO
I need to execute that result.. I know that i can copy/paste into Query Analyzer and then run it but how can i handle that result and run all in shot ...
I tried something like this:
DECLARE @DROP AS VARCHAR(8000) SET @DROP='exec sp_drop_allindex' EXECUTE (@DROP)
and i see the same out , but my indexes and PK still there ... i'm confused about it ..
how to use opendatasource to execute a stored procedure remotely in MySQL with parameters..I am using sp_configure to enable and disable Ad Hoc Distributed queries as below before and after the open data source statement
sp_configure show,1 reconfigure with override go sp_configure 'Ad Hoc Distributed Queries',1 reconfigure with override go
I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query window
Hi everyone,first time here, so I'm sorry if this has been covered already agesago. :(I am trying to learn T-SQL and Stored Procedures and bought the bookon these topics by Djan Sunderic, Publisher McGraw Hill/Osborne. I'malready stuck on my first Stored Procedure and getting error messagesthat I cannot understand. I've already tried Google and Microsoftonline to no avail. I do have the .NET Framework on my system and useit for programming in C# sometimes and by the looks of the error, it'ssomething to do with that? Please note I am only using SQL ServerExpress.Here is the first Stored Procedure:SET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOCREATE PROCEDURE ap_HelloASBEGINSET NOCOUNT ON;SELECT 'Hello world'SELECT * from dbo.EqTypeENDGOThe error in its entirety is this:Msg 6522, Level 16, State 1, Procedure ctrd_DDL_PROCEDURE_EVENTS_vb,Line 1A .NET Framework error occurred during execution of user definedroutine or aggregate 'ctrd_DDL_PROCEDURE_EVENTS_vb':System.UnauthorizedAccessException: Access to the path 'c:server_login.log' is denied.System.UnauthorizedAccessException:at System.IO.__Error.WinIOError(Int32 errorCode, StringmaybeFullPath)at System.IO.FileStream.Init(String path, FileMode mode, FileAccessaccess, Int32 rights, Boolean useRights, FileShare share, Int32bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, StringmsgPath, Boolean bFromProxy)at System.IO.FileStream..ctor(String path, FileMode mode,FileAccess access, FileShare share, Int32 bufferSize, FileOptionsoptions)at System.IO.StreamWriter.CreateFile(String path, Boolean append)at System.IO.StreamWriter..ctor(String path, Boolean append,Encoding encoding, Int32 bufferSize)at System.IO.StreamWriter..ctor(String path, Boolean append)at VbTriggers.Triggers.trigger_DDL_PROCEDURE_EVENTS() ..The statement has been terminated.Can anyone assist please? :(Many thanks in advance,Lara
HI,I need to run same kind of transactions (basically deleting records)in a loop but I have only 1 hour in a day to run my procedure. So Ineed to set a timer in a SP so that SP terminates after one hour andthen rest of the transactions will be done next day.Can anybody suggest as how to check execution time in a storedprocedure? The execution of the SP will be scheduled every night.If u need any further info pls ask.Thanks,Subodh
I have a Execute SQL Task I get some values from a table onto three variables. Next step in a DFT, I try to execute a stored proc by passing these variables as parameters.
This is the syntax i use, in the parameters tab of the DFT I ensured that all the parameters are correctly mapped.
When I run the package, it executes successfully but no rows are fectched. I tried running the stored proc manually in the database, and it seems to work fine.
I have a maintenance stored procedure that executes a script using xp_cmdshell and sqlcmd. The stored procedure has one argument that is contains the name of the procedure to update.
The stored procedures retrieves the location of the stored procedures (stored in a table) and then builds a variable that contains the sqlcmd command. Note that the file name of the script is <stored procedure name>.sql
I have a foreach loop in my SSIS script. I am able to successfully enumerate through an input query. I have a script task inside of my container. I would like to use this task to formulate a Stored Procedure and save this procedrue in a variable so I can use in a future Execute SQL task.
Here is a copy of the code (Which Does Not Work) I am using in the script task to set the variables.
Has anyone encountered cases in which a proc executed by DTS has the following behavior: 1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio 2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+) The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query) The Update ad-hoc query will finish in 2 minutes
Hi All, I have a peculiar problem with SQL2000. When i execute a Stored procedure in Demo & Production i get different outputs. But i copied the business logistics from the Sp and executed as a script in both the servers. Now Both the records are same. I WANT TO KNOW " WHETHER THERE IS ANY DIFFERENCE IN EXECUTION METHODOLOGY BETWEEN STORED PROCEDURE AND QUERY". NOTE: My stored procedure has 14 executable scripts. Upto 10 scripts no date comparisons were made. But at the 11th script the records differ. I DOUBT WHETHER THERE WILL BE ANY DATE RELATED ISSUE WHEN EXECUTING AS STORED PROCEDURE AND SCRIPT
END I'm then using a tableadapter to execute this from my ASP.NET page using the following code, Protected Sub ExecutePackage() Dim ExecuteAdapter As New SCC_DAL.RunSSISTableAdapters.SSISRunBuildSCCDWTableAdapter() ExecuteAdapter.SetCommandTimeOut(0) Dim strResult As String strResult = ExecuteAdapter.Execute() lblResult.Text = strResult End Sub If I remove 'NO_OUTPUT' from my stored procedure and run it the results contain a field named 'output' with all the steps from my package. Then below this is my return value. In my code I can only return the first step of the package results - which tells me nothing useful. I need to be able to return the return value (0-6) in my code. When I have 'NO_OUTPUT' in my stored procedure and execute it I am left with just the return value. However no value is returned in my code at all although the package does run. I've tried bother RETURN @ReturnValue and SELECT @ReturnValue to no avail. Can someone suggest how I can get the value 0-6 to my code?
CREATE PROCEDURE SelectCostumers @name varchar(100) Declare @SQL = "SELECT Id, Name FROM Costumers" AS IF (@name IS NULL) @SQL ELSE @SQL += "WHERE Name LIKE @name"
See, what I need is a string variable that I can concatenate with whatever I want depending on the parameter I get.
Hi all i am facing problems in executing stored procedures. Sometimes the connection to server fails. all the query, sp working fine few minutes back fails. the sp executes and executes and does not get results but hangs later a get an error.
Any ideas please let me know it is quite urgent. i am at the point of testing and only now facing such problems
I have a database user dsrpReader that can execute stored procedures in one database; it's the only thing that this user can do. Works great except for the below stored procedure.
AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from
[Code] ....
If I run the above as an administrative user (windows login), I get N rows of information back (N > 0). If I run it as an unprivileged user (see beginning of post), I get 0 rows back and no error messages.
Adding 'with execute as owner' solves the issue, but I'm not sure of the implications. Am I opening up the database to attacks (or even the complete server)?
If so, how to continue.
In an attempt to solve the issue I have given permissions to the user dsrpReader on the information_schema.columns but have no success. It did not work. This was just a try, I actually want to set up a dedicated user with some permissions that I can use in the 'with execute as 'limiteduser'.
2nd Stored procedure executes successfully and 1st stored does not executes where only difference is 3rd parameter value 173 and NULL value.
Is it because " IF @tagno IS NOT NULL" used in stored procedure is not working while @tagno is sent as 173 in sp parameter. Error throwing while executing 1st stored procedure is as below.
Msg 8115, Level 16, State 6, Procedure p_sub_agent_Grp_report, Line 48 Arithmetic overflow error converting nvarchar to data type numeric.
Msg 8115, Level 16, State 6, Procedure p_sub_agent_Grp_report, Line 48 Arithmetic overflow error converting nvarchar to data type numeric.
Note: sub_agent_tag_no column of table Sub_agent_tag_dtl has datatype Numeric(18,0).
How do you call a store procedure in an ActiveX script? I have a stored procedure that I want to execute everytime my Data Driven Query tasks inserts a new record.