Experience A Hard Time To Connect To The Database My Dbase Is Sql Express Ed 2005
Aug 8, 2006
hi to all , well i succesfully installed SQL server 2005 express edition in windows 2000 however when i am trying to connect my program thru ODBC im having a difficulty to connect. but based on my observation if i am not connected to the internet i cannot connect to my database but if i am connected to the internet i could access the SQL server 2005 express edition.i have read the hardware requirements for SQL server 2005 express edition i have upgraded the IE5 into IE6 SP1,windows 2000 SP4, even my memory to 1GB.but still i have the problem.
my question is, do i have to maintain my connection to the internet for me to have a smooth SQL connection?
BTW, i badly need the answer.Bigthanks!
-gae-
View 1 Replies
ADVERTISEMENT
Dec 16, 2005
Hi,I'm attempting to connect to an Oracle database using SQL Server 2005Express (OS is Windows XP Professional) and having absolutely no luck.Here is the information SQL Plusgives me about the database when I log in -Connected to:Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit ProductionWith the Partitioning, OLAP and Oracle Data Mining optionsJServer Release 9.2.0.6.0 - ProductionAs you can see I have no problem connecting with the Oracle specifictools (SQL PLUS and PL/SQL Developer).I've tried creating a linked server with both the Microsoft providedOLE DB provider and the Oracle provider. With the Microsoft Provider Iget the following error when attempting a query in the query editwindow.OLE DB provider "MSDAORA" for linked server "ORACLE" returned message"Oracle client and networking components were not found. Thesecomponents are supplied by Oracle Corporation and are part of theOracle Version 7.3.3 or later client software installation.Provider is unable to function until these components are installed.".Msg 7303, Level 16, State 1, Line 2Cannot initialize the data source object of OLE DB provider "MSDAORA"for linked server "ORACLE".When I try connecting withe Oracle provider I get the following -OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLETEST2"returned message "ORA-01017: invalid username/password; logon denied".Msg 7303, Level 16, State 1, Line 2Cannot initialize the data source object of OLE DB provider"OraOLEDB.Oracle" for linked server "ORACLETEST2".I've set the password up as a local to remote login mapping using thesecurity page of the Linked Server property dialog. The username /password are definitely correct -- I used them to log in using SQL PLUSand PL/SQL Developer. I'm using an Oracle 9 client.PLEASE HELP !!!!!Thanks,Signed Frustrated
View 8 Replies
View Related
Jan 13, 2007
Here is the situation:
I have SQL server express 2005 installed on my pc as instance SQLEXPRESS.
I have created a Visual Basic applicaion with the following as connection to the SQL server express 2005 running on the same PC:
****************************************************************************************************
Dim lconnectionString As String Dim builder As New SqlConnectionStringBuilder Dim cmd As New SqlCommand Dim reader As SqlDataReader Dim parameter As SqlParameter builder("Data Source") = ".SQLEXPRESS" builder("Initial Catalog") = "" builder("AttachDbFilename") = "C:My DocumentsVisual Studio 2005Projectsabcabcabc.mdf" builder("Integrated Security") = True builder("User Instance") = True lconnectionString = builder.ConnectionString Dim sqlConnection1 As New SqlConnection(lconnectionString) cmd.CommandText = "SP_add_collection" cmd.CommandType = CommandType.StoredProcedure cmd.Connection = sqlConnection1 sqlConnection1.Open()
*******************************************************************************************************************
It seems that i can not connect to the abc.mdf in SSMSE while the VB program is running. (ERROR:
Database 'C:My DocumentsVisual Studio 2005Projectsabcabcabc.mdf' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. (.Net SqlClient Data Provider) )
If i connect to the abc.mdf first in SSMSE, then run the VB program afterwards, it gives me the error on this line -- sqlConnection1.Open()
I want to be able to access the abc.mdf database with both SSMSE and VB at the same time. Could anyone help me on this ?
Thanks very much !
apple
View 4 Replies
View Related
Jun 30, 2005
I am working through the book ASP.Net Unleashed Second Addition. I am trying to open a simple database connection. (using the sample "pubs" db from SQL Server)I have copied the author's code exactly, but it just won't work. I keep getting this error:What am I doing wrong?????Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: BC30182: Type expected.Source Error:
Line 5:
Line 6: Sub Page_Load
Line 7: Dim conPubs As SqlConnection
Line 8: conPubs = New SqlConnection( "server=localhost;uid=webuser;pwd=secret;database=pubs" )
Line 9: conPubs.Open()
View 5 Replies
View Related
Jul 4, 2007
Hi
I'm trying to connect to the northwind database thats available online using c# and SQL 2005, both express editions. i used the following command
sqlcmd -S yourServerSQLExpress -E -iinstnwnd.sql
and it connects to the northwind database. but when it comes to the part where i have to select the data source, there are only 2 available - microsoft access database file, microsoft SQL server database file. but according to the microsoft books that i'm following, there should also be a "micosoft SQL server" in the data source list. because of this i cant connect to the database.
Please help...
thank you
View 3 Replies
View Related
Jul 20, 2007
Hi All,
We have here a WinForms Application on laptops that uses SQL Express as its database. Initially all was going well, then it was decided that the laptop Hard Drive should be encrypted. Thats when the fun started.
It is now very hit and miss as to whether we can connect to SQL and service pack 2 will not install.
So now to the question :-
Does anyone know if there are any compatablity issues with SQL 2005 Express and hard disk encryption (particularly BeCrypt).
Thanks
Steve
View 1 Replies
View Related
Nov 21, 2006
I've used Sql Server 2000 and Visual Studio 2003 for a few years. I've started a new position and they have access to Sql Server 2005 Standard and Visual Basic 2005 Express which I'd like to use for a new project. So I installed Sql Server 2005 and then VB 2005 Express on my workstation. I didn't choose the Sql Server option for VB Express because I already had Sql Server 2005 Standard installed with a simple database created. I created a simple vb project that justs connects to the database but I get the following error.
Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0000, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
I looked at permissions in the database and it looks ok. I'm the db owner and I'm using Windows Auth. My connection string is
"Data Source=MySystem;initial catalog=AdventureWorks;integrated security=true;"
I thought I'd look at the starter kit to get some ideas about what the problem is, but when I started the movie starter kit project, it was upset that I didn't have Sql Server 2005 EXPRESS installed. Yea, but I do have Sql Server 2005 Standard installed.
Any help will be greatly appreciated. Thanks.
View 6 Replies
View Related
Mar 30, 2006
Hello,
Ho do I allow multiple users to share a database?
Background
I have developed a Windows App in VS.NET 2005 which connects to a SQL 2005 Express database.
Now I want to install the app and database on the network and I am getting an error "File 'file_name' is on a network device not supported for database files"
What is the best way to get this working
Thanks in advance,
Phil
View 1 Replies
View Related
Apr 25, 2006
Hi,
I've downloaded the sql server 2005 management studio express executable to my second hard drive, as there is no room on my main drive
However, when I try to install, the program shows me both drives, and shows that there is not enough room on my main drive, but it does not allow me to change the installation to my second drive.
I have previously installed the main sql express product to my second drive with visual studio. There's loads of room.
Can anyone give me a clue as to why this might be happening.
Thanks
John
View 1 Replies
View Related
Oct 8, 2007
Hi, i am new to sql server and visual basic, i need to connect my sql server database to a new application i've developed in visual basic 2005 express. Can any one tell me the steps to do this. Many Thanks.
View 2 Replies
View Related
Mar 16, 2007
Hi am very new with VB.net (Visual Studio 2005) and the first time try to use the sql server 2005 express. I did create a trial.mdf (local server) and complete procedure to attach the trial1.mdf in Microsoft SQL Management Studio Express.
I try to use VB to connect /open/close it with the following codes: (but failed)
-----------------------------------------------
Imports System.Data.SqlClient
Public Class Form1
'Link database
Dim DB_Location = "c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTrial1.mdf"
Dim MyConnection = "Server=localhost; DataBase= " & DB_Location & "Integrated Security=SSPI"
Dim sqlConnection As New SqlConnection(MyConnection)
'Use database
Dim strSQL As String = "SELECT FROM Trial1 WHERE col2 = 'trial' "
Dim cmd As New SqlCommand(strSQL, MyConnection)
sqlConnection.Open() ' ----> error
cmd.ExecuteNonQuery() ' ----> error
sqlConnection.Close() ' ----> error
End Class
-------------------------------------------
At the last 3 line of codes I got the errors ... can someone explain why & help me to correct it?
Thanks for any help
View 10 Replies
View Related
Aug 22, 2006
I am having trouble connecting dbf of version dbase II. I can connect dbase III and dbase IV in ssis package,but can't connect dbase II.hope your help!
View 3 Replies
View Related
Dec 12, 2006
I'm having a problem connecting with a Java application but I CAN connect using my .Net application - the user name and password are the same for both (using the same database on SQL Server Express 2005).
The error I get is: "com.microsoft.sqlserver.jdbc.SQLServerException: Cannot open database "CORNERS" requested by the login. The login failed." An interesing note - I get the same message if the database is not running.
SQL Server Express 2005 is installed in mixed mode.
Here is my connection string in the .Net appplication: <add key="connectString" value="Server=(local);UID=sa;PWD=myPasswd;Database=CORNERS" />.
These are my values in my Java app web.xml -
<init-param>
<param-name>DBDriver</param-name>
<param-value>com.microsoft.sqlserver.jdbc.SQLServerDriver</param-value>
</init-param>
<init-param>
<param-name>DBURL</param-name> <param-value>jdbc:sqlserver://localhostsqlexpress:1055;databaseName=CORNERS</param-value>
</init-param>
<init-param>
<param-name>DBUser</param-name>
<param-value>sa</param-value>
</init-param>
<init-param>
<param-name>DBPwd</param-name>
<param-value>myPasswd</param-value>
</init-param>.
And yes, the port is 1055 - I checked to find it.
I am using Microsoft SQL Server 2005 JDBC Driver 1.0 (sqljdbc_1.0.809.102).
Does anyone have any idea what is wrong so that the login fails in the Java application but works in the .Net application?
View 7 Replies
View Related
Dec 31, 2005
Hi,I've an account with a hosting service provider online for SQL Server database. I've downloaded SQL Server 2005 Express from ASP.Net. How can I use it to connect to my SQL Server Database which is sitting on remote server? The hosting provider gave me following things to connect to the remote database.Server NameDatabase NameUser NamePasswordRegards,A.K.R
View 2 Replies
View Related
Sep 28, 2006
Everything was working fine. I have been able to connect using windows authentication. Then, I went into the ODBC manager to add a data source and it failed to connect so I went back into the Server management studio to modify users. After doing this I now get an error when I try to conenct the management studio to the SQL server.
I wasn't modifying the login for my windows account that I normally use, I was modifying a different one, however I now get the message "An error has occured while establishing a connection to the SQL server. This kind of problem can ocure because the default behavior of the server does not support all connection methods" blah blah.
Does anyone know how I can attach to the server? Or, do I need to somehow remove the server and create a new one? How would I do that?
Thanks in advance for any input.
View 1 Replies
View Related
Mar 10, 2006
I've seen the following error posted when people try to connect to their server via their applications but didn't see anyone having problems when trying to connect with SQL Server Management Studio Express. Am I missing something here? This is the error:<<An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)>>The server is not remote so I don't see why I need to enable remote connection. I am also using the default connection settings.
View 3 Replies
View Related
Feb 24, 2007
On my home machine without permanent network connections enabled, I cannot get the Management Studio connect to the database server. Always get this error:
Cannot connect ot MPLIAMSQLEXPRESS
Additional Information:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, erro: 26 - Error Locating Server/Instance Specified)(Microsoft SQL Server)
I have used the SQL Surface Area Configuration Tool to reset the defaults to allow remote connections, stopped and restarted the server, but still get the same message.
Please help.
View 12 Replies
View Related
Jan 15, 2008
I am currently at build 9.00.3054.00 and I'm having some strange
performance problems.. inserts hanging etc.....
Has anyone applied build 3175 or 3215 with good results....
any input is appreciated!
View 1 Replies
View Related
Apr 14, 2008
It looks like I'll be assigned with development and database management utilizing Microsoft Office Sharepoint Services and saw that there are some issues as it can become quite unwieldy.
I was wondering what difficulties to expect from MOSS and/or Sharepoint in terms of managing and backing up. Any tips or suggestions?
View 2 Replies
View Related
Jan 16, 2008
Hey all! I am new in this form and also new with the SQL serve. I have installed that free express edition of SQL server 2005 and when i am trying to connect to server from my C#.net application i am not able to do it and when i am trying to degug it gives me the error that is the user is not SQL thrusted user. I am able to connect directly thru SQL server using this userid and password but not thru VWD 2005 Express application.
I have read online that so many people are having that problem. so is it the problem of swl server Express edition or do i have to make some setting to connect to the application.
Please please please please someone guide me . I am stuck here in the beginning only. I would really appreciate it.
the code that i wrote is here:----
using System.Data.SqlClient;
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
if (!Page.IsPostBack)
{
}
}
protected void Submit_Click(object sender, EventArgs e)
{
String querry;
SqlDataReader dbread;
try
{
SqlConnection conn = new SqlConnection(ConfigurationSettings.AppSettings["Conn1"]);
SqlCommand comm = new SqlCommand();
conn.Open();
querry = " Select password from login where userId='" + TxtUser.Text + "'";
comm.CommandText = querry;
comm.Connection = conn;
dbread = comm.ExecuteReader();
dbread = null;
if (dbread.HasRows)
{
while (dbread.Read())
{
if (dbread["password"].ToString() == Txtpwd.Text)
{
Response.Redirect("home.aspx");
}
}
Response.Write("Your Password Doesn't Match");
}
else
{
Response.Write("Your User Name Is Wrong");
}
conn.Close();
}
catch (Exception ex)
{
Response.Write(" This is an Error - " + ex.Message );
Response.End();
}
Thanks,
Komal
View 1 Replies
View Related
Dec 14, 2007
In a dataset for a report, one of the column is "age group" with 6 different type of 10-year age groupings, <40, 40-49, 50-59, 60-69, 70-79, 80+. I am having a hard time to filter in/out the "<40" and "80+" in the report. SSRS does not seem to understand the "<" and "+" in a string. I need to be able to filter in/out one/both of this two age groupings on some matrix table. Any suggestion. Thanks.
View 1 Replies
View Related
Jun 24, 2007
I am new to this type of programming and and have read all articles on adding an image to the database and it seems they all use sql queries to add an image but I want to add an image at design time. I am using Visual Basic 2005. I am also using Visual Basic 2005 Express Edition to try the same thing. I am trying to build a Translator program for english to Brazilian Portuguese and the reason I want to add the images is so that when I translate the word cat from english to Portuguese, I can also show an image of a cat. Can anyone please help me
View 3 Replies
View Related
May 26, 2008
Hi,
I have VS Pro 2005 and SQL Server Express 2005 installed on an XP Pro machine. When using VS 2005, in the 'Server Explorer' window I can see and attach to two SQL Server databases that I have set-up. But if I attempt to access the same databases from withn the 'Solution Explorer' window I get the following dialog box message,
"
Required Component Missing (Dialog box heading)
Connections to SQL Server Files (*.mdf) require SQL Server Express to function properly. Please verify the installation of the component or download from the URL: http://go.microsoft.com/fwlink/?LinkId=49251
"
I have uninstalled and then reinstalled both VS 2005 and SQL Server Express twice but it has helped.
I don't understand why I'm getting this error because all of the server configuration tools and connection utilities seem to work fine but VS say's that SQL Server Express is not installed.
Thanks,
CLN
P.S.
I had another application that required MSDE 2000A to be installed. When I removed the other application I also removed MSDE 2000A and that's when the problem began.
View 3 Replies
View Related
Apr 14, 2006
I have a web app running on a laptop (for demo purposes) with the following connect string:
"datasource=<machine name>SQLExpress;initial catalog=BlueTarp;User ID=sa;Password=xxx"
I can connect to this instance using both oSQL or sqlcmd and can select from the tables within BlueTarp, but my web app won't connect, and I can't figure out why!!
When I installed SQL Express, I used a named instance, called "SQLExpress".
I'm using mixed mode authentication.
One strange thing is that I can connect to either SQLExpress or MSSQLSERVER instances, but they appear to be the same instance -- I can use bluetarp in both.
when I use SQLExpress for instance name in web.config I get "SQL Server does not exist or access denied"
when I use MSSQLServer for instance name in web.config I get "Invalid connection"
And in fiddling with the web.config, I somehow did something to get a machine.config error, something like "machine.config couldn't be loaded because of an unloaded appdomain".
It's driving me nuts because I've spent a good 40 hours on this stupid problem, throwing the whole margin down the toilet.
Does anyone have any ideas?
Thank you,
Aarron
View 3 Replies
View Related
Oct 12, 2006
I created test project and want to use SQL 2005 database inside.
1. I created Test database with DEFAULT rights
2. I go into server explorer, press Add Connection. Shows message box for connecting to the server: <PCNAME> using windows authntification.
But NO database allowed to view :(.
Which setting should be set for SQL server database to i could connect and work with it?
View 8 Replies
View Related
Sep 27, 2006
Hallo,
i developed a little web-application.
I'm using a SQL 2005 Express edition db but i cannot connect.
i tried the connection strings from connectionstrings.com but unfortunately they dont list connectionstrings for SQL Express 2005.
Thats the one i guess it should work with:
Provider=SQLOLEDB;Data Source=SQLServerNameSQLEXPRESS;Initial Catalog=Lizenzportal;Integrated Security=true
I always receive following error:
No error information available: DB_E_ERRORSOCCURRED(0x80040E21)
Hope you can help me with this issue.
View 4 Replies
View Related
Sep 18, 2007
Hi all,
I'm new to this forum and haven't worked with SQL Server for a couple of years. Now it seems I'm getting back into it. I have SQL Express and SQL 2005 installed on an XP sp2 machine with IIS 5.1. I have a C#/ASP.NET web app in Visual Studio 2005 that keeps getting an error on attempting to connect (SqlConnection object). It's a generic error saying a probable cause is SQL Express default setup not allowing remote connections. Remote connections are turned on for both TCP and UDP. I can connect from within a small C# windows application using the same uid and pwd, so I suspect it's something related to IIS talking to SQLExpress. I would appreciate any help on other things to check. I am also fairly new to using IIS in the development environment.
Thanks
View 5 Replies
View Related
Nov 29, 2006
I have an very big application written in vb6 running on msde 2000. I tried to change it to sql express 2005 and I cannot connect to the database. I wrote a sample app in vb6 using adodc and it works fine. From the other app I get no connection. I copied the same connection string!. I do not use the adodc control.I connect with a connection object.I have enabled pipes and tcp/ip. Any ideas or suggestions more than welcome.
View 10 Replies
View Related
Dec 11, 2006
Hi,
I'm trying to learn some VB programming with the VB 2005 Express Absolute Beginner Series video tutorials (which I think is great) and have come across a problem that I can't solve.
When I follow the instructions in Lesson 9 (Databinding Data to User Interface Controls) my application will display the data from the database correctly and I can edit it (and as long as the debugger is running the data remains changed). However, the changes won't propagate back to the database. I don't get any error messages but after I edit the data, save (with the save button on the BindingNavigator toolbar), and end debugging the data in my database remains unchanged. When I use a MessageBox to show how many rows where edited/updated in the
Me.myTableTableAdapter.Update(Me.myDatabaseDataSet.myTable)
I get the correct number back. I'm sure the problem is not due to coding errors since I've also tried running the accompanying Lesson 9 project file that can be downloaded from MSDN and the problem persists.
I'm using Windows XP SP2, SQL Server 2005 Express Edition and VB 2005 Express Edition. I've tried installing SQL Server 2005 Express with a number of different settings, including default settings, but it doesn't make any difference.
Would greatly appreciate any feedback on this as I'm keen to resolve this problem so I can get on with the next tutorial lesson.
Thanks,
Ieyasu
View 6 Replies
View Related
Feb 9, 2007
I've installed, with default settings, VS 2005 and Server 2005 Express and cannot get VS2005 to connect. This is the error:
Unable to open the physical file "..path...mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process."
I shutdown Server 2005 but that didn't change anything. Any ideas?
Thanks.
View 4 Replies
View Related
Feb 16, 2007
I have installed MS Visual Web Developer 2005 Express Edition on my Notebook (WinXP Pro SP2). And it's working fine. Then I tried installed SQL Server 2005 Express Edition SP1. There is no error during installation and it seems to be working as I can see the SQL Server (MSSQLServer) service is running. As SQL server configulation manager., the protocal shared memory , named Pipes and TCP/IP are enabled.
But when I want to add connection using VWD 2005 by pointing to datasource (MS SQL Server database file and selecing file from .mdf file from SQL sample database file. Then test connection, I got a error that
"An error has occurred while establishing a conneciton to the server. when connecting to SQL server 2005, this failure may be casued the the fact that under the default settings SQL server does not allow remote connections. (provider: SQL Interfaces, error: 26- Error locating server/instance specified)
Can you please advise what the missing part of my configulation ?
Thanks
View 4 Replies
View Related
Feb 1, 2007
Hi All:
I'm new to using sql express 2005 as the database, so I apologize if my question is very basic.
I can connect to db through sql mngmt studio, but I don't know how to connect through application code. The authentication mode is windows. I'm having trouble with the provider in the application code.
Can someone please tell me where I can find more detailed information on available providers for sql express?
Thanks for any help, as I'm against a tight deadline.
View 6 Replies
View Related
Aug 31, 2007
Hi,
I am trying to connect to SQL Server Express 2005 from a remote connection through the internet using an IP address in a string like this;
Data Source=190.190.200.100,1433;Network Library=DBMSSOCN;Initial Catalog=myDataBase;User ID=myUsername;Password=myPassword;
the error I am getting is this
A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
anyone have any suggestions or maybe another way to achieve this type of connection?
Thanks,
Razzle
View 1 Replies
View Related