Export All Data From SQL2005
May 1, 2007Hi,
How to export all data from SQL2005 server.
Is there any method to do so?
with regards
Shaji
Hi,
How to export all data from SQL2005 server.
Is there any method to do so?
with regards
Shaji
How can I Export Database with foreing Key and primary key.
Operation is that
SQL2005 Management Studio/Database/Tasks/Export Data
Before Version is SQL2000 we can Selected Copy Object and data between server and then Use Default Options click checked and Select Copy Index, Copy Foreing Primary key vs vs
But this options is not found in the SQL2005 Management Studio/Database/Tasks/Export Data wizard or I can't found it.
How can I export foreing Key and primary key with SQL2005 Management Studio/Database/Tasks/Export Data wizard.
Best Regards,
Athena.
Dear all,
I have a SQL 2000 and SQL 2005 servers separately, but by whatever reason, I can't use SQL 2000 Enterprise Mgr anymore now so I have to use SQL 2005 Mgm studio to open up my SQL 2000 databases now.
However, I'd like to export data from Sql 2000 to another Sql 2000 server, but via a Sql 2005 mgm studio interface right now. How can I do so? I can't find "Export Data" from the "Task" context menu in Sql 2005 mgm studio.
Thanks,
Hi all,
I perform a export using sql2005 wizard to output the data from a table to a execl file and at the same time create a package.
The following error encounterd,anyone know what is the possible causes:
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Success)
- Setting Destination Connection (Success)
- Validating (Success)
- Saving (Success)
- Prepare for Execute (Stopped)
- Pre-execute (Stopped)
- Executing (Error)
Messages
* Error 0xc001000e: New_test_export: The connection "DestinationConnectionOLEDB" is not found. This error is thrown by Connections collection when the specific connection element is not found.
(SQL Server Import and Export Wizard)
* Error 0xc001000e: New_test_export: The connection "DestinationConnectionOLEDB" is not found. This error is thrown by Connections collection when the specific connection element is not found.
(SQL Server Import and Export Wizard)
* Error 0xc00291eb: Drop table(s) SQL Task: Connection manager "DestinationConnectionOLEDB" does not exist.
(SQL Server Import and Export Wizard)
* Error 0xc0024107: Drop table(s) SQL Task: There were errors during task validation.
(SQL Server Import and Export Wizard)
- Copying to `COST_CENTER_V` (Stopped)
- Post-execute (Stopped)
- Cleanup (Stopped)
Thanks for help.
Hi all,
I have scheduled a package to export data from the table to the execl file in the local directory, it work fine. However, when the next time you execute the package it give error on 'file already exists'. Prephap this is due to previously already created a file in the directory.
I try to use drop option in the ssis during creating the package for export, but the result still the same. I do not know the drop option is working, can someone tell me is that working fine? if not what is the solution or possible cause.
Thanks for your help.:)
hi
i try to restore a bak file from another sql2005 server to my sql2005 server, but it show the error message as below :
TITLE: Microsoft SQL Server Management Studio Express
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
Cannot open backup device 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackupackup.bak'. Operating system error 5(error not found).
RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3201)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=3201&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
pls some one can help me ???
thanks
chaus
I understand that SQL 2005 now supports XML documents. I have a rather large file that is in XML format that I need to get into a table in SQL2005. I have tried the import wizard to no avail. I even tried to use DTS packages in SQL 2000 and still no luck.
Does anyone know of an article or information I can obtain on how to import data from and XML file to a SQL 2005 Table?
Here is a basic idea of the data as it is shown on the first row of the XML file.
Code:
<?xml version="1.0" encoding="UTF-8"?><SheetName Version="1.0" Date="2006-09-10">
<SheetNameLine>
<action>A</action>
<Id>1</Id>
<Code>ACCOMPS</Code>
<AddData></AddData>
<DataIssue></DataIssue>
<Type>DATA HERE</Type>
<Serial>123546789</Serial>
<Date>DATA HERE</Date>
<Updated>DATA HERE</Updated>
<Info>DATA HERE</Info>
<AColumn></AColumn>
<BColumn></BColumn>
<CColumn></CColumn>
<DColumn></DColumn>
</SheetNameLine>
This particular file is way too large to import into Excel and then into SQL, so I need to find an alternative way.
Any ideas? Help?
Thanks in advance.............
Can you open/use a database created in SQL2005 in SQL2005 Express?
Thanks for the help!
Max
I'm stumped. When using the classic asp page, the table produced on the web has 4 rows. But, when using the asp.net 2.0 side against the same stored proc, I get double the rows - 8. However, when I pull from the sql table directly there are only 4 rows. Any ideas? I've looked at this far too many hours...da = New Data.SqlClient.SqlDataAdapter("pTblTempDisplayInsert2 0,'" & coList & "','" & tblList & "','" & varTblNameT & "'", cn)
da.Fill(ds, "myTables")
For Each drow As System.Data.DataRow In ds.Tables("myTables").Rows
varTxt &= drow.Item(
"titleID") & "<br />"
Next I get:18521850205520531852185020552053If I run the last line of the stored procedure with the variable table name filled in:SELECT d.titleID FROM ##varTblName d LEFT JOIN xtblTitles t ON d.tblID=t.tblID LEFT JOIN tblStatTitles s ON d.titleID=s.titleID LEFT JOIN xtblURL u ON u.urlID=t.urlID ORDER BY d.tblID, d.[year], d.lineOrder, d.countyID I get:1852185020552053If I do a simple select * from ##varTableName, I get four rows....Thanks,Janet
I need to transfer data from SQL Server 2000 to SQL Server 2005 nightly. Replication DB1.T1 table in SQL 2000 to DB2.T1 table (the same table structure) in SQL 2005. What are my options? I need to extract a daily data and do this daily. Some example would be greatly appreciated.
Thanks,
How do i import As400 data in to SQL2005(standard version) using SSIS?? Please help!!!
View 1 Replies View RelatedHi, there;
I want to importing data from ODBC, I created DataReader Source which use a .NET Provide Odbc Data Provider and connected successfully. My destination is a OLE DB Destination that points to SQL2005. I set the SQL command as "SELECT * from ....".
I also have problem to create new table in SQL2005 using SSIS Import and Export Wizard, it doesn't know the source table table schema (two date type column). So I create the new table manully and run the package, I got error:
SSIS package "Package1.dtsx" starting.
Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.
Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning.
Error: 0xC02090F5 at Data Flow Task, Source - Query [1]: The component "Source - Query" (1) was unable to process the data.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: The PrimeOutput method on component "Source - Query" (1) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "SourceThread0" has exited with error code 0xC0047038.
Error: 0xC0047039 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: Thread "WorkThread0" has exited with error code 0xC0047039.
Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning.
Information: 0x402090DF at Data Flow Task, Destination - PITest CMF [169]: The final commit for the data insertion has started.
Information: 0x402090E0 at Data Flow Task, Destination - PITest CMF [169]: The final commit for the data insertion has ended.
Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning.
Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "Destination - PITest CMF" (169)" wrote 0 rows.
Task failed: Data Flow Task
SSIS package "Package1.dtsx" finished: Success.
Can any one know what's wrong here?
And it is quite pain that you have to specify the table name every time you want to create a new table in SQL2005. It is so easy in SQL2000!!!
Thanks.
Hi,
i need to import data from sql 2005 into sql mobile, is there anyway to do it?
Need help urgently....
thanks
Joel
Hello, everyone. I am having problems catching a data duplication issue. I hope I can get an answer in this forum. If not, I would appreciate it if someone can direct me to the right forum.
I am working on a vs2005 app which is connected to a sql2005 db. Precisely, I am working on a registration form. Users go to the registration page, enter the data, ie. name, address, email, etc. and submit to register to the site.
The INSERT query works like a charm. The only problem is that I am trying to reject registrations for which an email address was used. I put a constraint on the email field in the table and now if I try to register using an e-mail address that already exists in the database I get a violation error (only visible on the local machine) on the sql's email field, which is expected.
How can I catch that there is already an email address in the database and stop the execution of the code and possibly show a message to the user to use a different address?
Thank you for all your help.
Antonio
Hi
I have to import data from a number of excel files to corresponding tables in SQL 2005. The excel files are created using excel 4.0. I have created an excel connection manager and provided it with the path of the excel sheet.Next i have added an excel source from the toolbox to the dataflow. I have set the connection manger, data access mode, and the name of the excel sheet (the wizard detects the sheet correctly) in the dialog window i get when i double click the excel source. Every thing goes fine till here. Now when i select the 'columns' in this dialog window or the preview button, i get this error
TITLE: Microsoft Visual Studio------------------------------Error at Data Flow Task [Excel Source [1]]: An OLE DB error has occurred. Error code: 0x80004005.Error at Data Flow Task [Excel Source [1]]: Opening a rowset for "test4$" failed. Check that the object exists in the database.------------------------------ADDITIONAL INFORMATION:Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap)------------------------------
Any ideas about why is this happening???
Umer
Hi
I have a (possibly) common position where half of our IT department is SQL 2005 and the rest is SQL2000. For myself, having to work in a SQL2000 environment and needing data from a SQL2005 Cluster I came up with this solution.
Also, to alert me when the process starts and completes since it is part of a scheduled process, I have it do a RAISERROR with logging to record entry and exit times. In addition, this runs out a series of PRINT statements that lets the operator know what table is currently being worked on.
Of course, any suggestions for speeding this up would be helpful!
What I have found that works for getting data (albeit slow) from SQL 2005 down to SQL 2000 is to script a fairly simple copy process -
-- it is actually pretty easy to follow if you just read the code......
-- first, we find all the views which are present, so they can be ignored when copying the raw data
CREATE TABLE #VIEWS (TABLE_NAME NVARCHAR (255) )
INSERT #VIEWS
SELECT TABLE_NAME FROM
OPENDATASOURCE(
'SQLOLEDB',
Data Source=SQL2005server;User ID=trust_me;Password=i_know_what_i_am_doing' )
.SQL_SIS_SYSTEM.INFORMATION_SCHEMA.VIEWS
-- now, we get the actual tables with data
CREATE TABLE #TEMP (TBL_SCHEMA VARCHAR (12), TBL_NAME VARCHAR (255), RECCNT INT )
INSERT #TEMP
SELECT TABLE_SCHEMA , TABLE_NAME FROM
OPENDATASOURCE( 'SQLOLEDB', 'Data Source=SQL2005server;User ID=trust_me;Password=i_know_what_i_am_doing' )
.SQL_SIS_SYSTEM.INFORMATION_SCHEMA.TABLES
WHERE TABLE_TYPE = 'BASE TABLE'
AND TABLE_NAME NOT IN (SELECT TABLE_NAME FROM #VIEWS)
-- then, we start copying tables over - now we tag the ones which are populated with at least 1 row.
-- the first cursor loop gets all table names, the second will find row counts of source tables.
-- this segment uses (ugh) cursor to loop through and gather all of the data. This cursor is at the table name level - not
-- processing anything, and is used only to find tables which have a rowcount > 0
-- believe it or not, the cursors run pretty darn quickly since they arnet doing any calculations - just finding
-- tables with row counts > 0
SET @QUOT = CHAR(39)
SET @LBRAKT = '['
SET @RBRAKT = ']'
SET @IUT = 'IsUserTable'
SET @ODBC_CMD ='(' + @QUOT + 'SQLOLEDB' + @QUOT + ',' + @QUOT + 'Data Source=SQL2005server;User ID=trust_me;Password=i_know_what_i_am_doing' + @QUOT +
').SQL_SIS_SYSTEM.dbo.'
PRINT 'BEGIN TABLE SCHEMA LOAD CURSOR. ' + CAST(GETDATE() AS VARCHAR (50) )
DECLARE GETEM CURSOR FOR
SELECT TBL_SCHEMA, TBL_NAME FROM #TEMP
OPEN GETEM
FETCH NEXT FROM GETEM INTO @TBL_SCHEMA, @TBL_NAME
WHILE @@FETCH_STATUS = 0
BEGIN
SET @SQL = 'UPDATE #TEMP SET RECCNT = ' +
'(SELECT COUNT(*) FROM OPENDATASOURCE(' +
@QUOT + 'SQLOLEDB'+ @QUOT + ',' + @QUOT +''Data Source=SQL2005server;User ID=trust_me;Password=i_know_what_i_am_doing' + @QUOT +
').SQL_SIS_SYSTEM.' + @TBL_SCHEMA + '.' + @TBL_NAME +')' +
' WHERE TBL_NAME = ' + @QUOT + @TBL_NAME + @QUOT
EXEC (@SQL)
FETCH NEXT FROM GETEM INTO @TBL_SCHEMA, @TBL_NAME
END
CLOSE GETEM
DEALLOCATE GETEM
PRINT 'FINIS TABLE SCHEMA LOAD CURSOR. ' + CAST(GETDATE() AS VARCHAR (50) )
DECLARE @PLIN VARCHAR (80),@LFT_PLIN VARCHAR (20),
@RT_PLIN VARCHAR (20), @TLIN INT
PRINT 'BEGIN TABLE CHECK AND LOAD CURSOR.'
DECLARE FETCHIT CURSOR FOR
SELECT TBL_NAME, RECCNT FROM #TEMP WHERE RECCNT > 0
OPEN FETCHIT
FETCH NEXT FROM FETCHIT INTO @TBL_NAME, @RECCNT
WHILE @@FETCH_STATUS = 0
BEGIN
PRINT 'CHECKING ' + @LBRAKT+ @TBL_NAME + @RBRAKT
IF NOT EXISTS (SELECT * FROM dbo.sysobjects
WHERE id = object_id
(@LBRAKT+ @TBL_NAME + @RBRAKT )
AND OBJECTPROPERTY(id,''+@IUT) = 1)
BEGIN
SET @LFT_PLIN = 'OBJECT' + SPACE(5)
SET @RT_PLIN = SPACE(5) + 'NOT FOUND. BUILD ' +
CAST(@RECCNT AS VARCHAR (6) ) + ' rowS.'
SET @PLIN = @LFT_PLIN + @LBRAKT+ @TBL_NAME + @RBRAKT
SET @TLIN = LEN(@PLIN)
SET @PLIN = @PLIN + SPACE(50 - @TLIN) + @RT_PLIN
PRINT 'ENTRY. ' + CAST(GETDATE() AS VARCHAR (50) )
PRINT @PLIN
PRINT 'COPYING DATABASE TABLE.'
SET @SQL = ' SELECT * INTO ' + @TBL_NAME +
' FROM OPENDATASOURCE' + @ODBC_CMD + @TBL_NAME
EXEC (@SQL)
PRINT 'COMPLETED. ' + CAST(GETDATE() AS VARCHAR (50) )
END
IF EXISTS (SELECT * FROM dbo.sysobjects
WHERE id = object_id
(@LBRAKT+ @TBL_NAME + @RBRAKT )
AND OBJECTPROPERTY(id,''+@IUT) = 1)
-- #TEMP (RECCNT) CONTAINS ROW COUNT OF SOURCE SYSTEM.
-- COMPARE TO ROW COUNT OF LOCAL TABLE
BEGIN
SELECT @DEST_RECCNT = RECCNT FROM #TEMP
WHERE TBL_NAME = @TBL_NAME
IF @DEST_RECCNT = @RECCNT
BEGIN
PRINT 'TABLE row COUNT MATCHES. BYPASSING REBUILD.'
END
IF @DEST_RECCNT <> @RECCNT
BEGIN
SET @SQL = 'DROP TABLE ' + @TBL_NAME
EXEC (@SQL)
SET @LFT_PLIN = 'OBJECT' + SPACE(5)
SET @RT_PLIN = SPACE(5) + 'REBUILD.' +
CAST(@RECCNT AS VARCHAR (6) ) + ' rowS.'
SET @PLIN = @LFT_PLIN + @LBRAKT+ @TBL_NAME + @RBRAKT
SET @TLIN = LEN(@PLIN)
SET @PLIN = @PLIN + SPACE(50 - @TLIN) + @RT_PLIN
PRINT 'ENTRY. ' + CAST(GETDATE() AS VARCHAR (50) )
PRINT @PLIN
PRINT 'COPYING DATABASE TABLE.'
SET @SQL = ' SELECT * INTO ' + @TBL_NAME +
' FROM OPENDATASOURCE' + @ODBC_CMD + @TBL_NAME
EXEC (@SQL)
PRINT 'COMPLETED. ' + CAST(GETDATE() AS VARCHAR (50) )
END
END
FETCH NEXT FROM FETCHIT INTO @TBL_NAME, @RECCNT
END
CLOSE FETCHIT
DEALLOCATE FETCHIT
PRINT 'FINIS TABLE CHECK AND LOAD CURSOR.'
XIT:
RAISERROR (50002,010,1) WITH LOG -- FLAG COMPLETION TIME IN SQL LOG
SET QUOTED_IDENTIFIER OFF
Hi,
I'm not sure if this should be in the Sql or VB forums.
Using VS2005 I have a graphics program which holds data in a Dictionary Object.
The data consists of a Key and a Structure called Arrows. This structure holds a startpoint and an endpoint, both of which consist of x and y co-ordinates. I need to insert these four co-ordinates into X,Y,X1 and Y1 columns of a table,
The following Insert statement will insert the correct IdKey and Textbox data, but will not compile the co-ordinates.
I have initialised the Points of the structure, but get the error message that Type is not defined.
With dbCommand
Dim _mstartPoint As Point
Dim _mendPoint As Point
Dim strSql As String
For Each kvp As KeyValuePair(Of String, Arrow) In Arrows
strSql = "INSERT INTO Drawing_Arrows (ArrowId,FlashingCode,X1,Y1,X2,Y2) Values ('" & kvp.Key & "', '" & txt_Title.Text & "','" & CType(Arrows(kvp.Key), _mstartPoint).x.ToString & "', '" & CType(Arrows(kvp.Key), _mstartPoint).y.ToString & "''" & CType(Arrows(kvp.Key), _mendPoint).x.ToString & "', '" & CType(Arrows(kvp.Key), _mendPoint).y.ToString & "')"
.CommandText = strSql
.CommandType = Data.CommandType.Text
.Connection = dbConnection
.ExecuteNonQuery()
Next
End With
My problem is how to extract the _mstartPoint x and _mstartPoint y as seperate items for insertion into X and Y in the table.
Any suggestions welcome.
Tailor
Hello everybody,
I'm a new SQL2005 user.
I'm
trying to import data from MySQL version 5x into my SQL2005 by wizard.
I created a DNS file and tested successfully using MySQL Connector/ODBC
v5.
Everthing seems fine but at the last step selecting data
source. The SQL2005 wizard forced me to choose using SQL command option
instead of selecting tables/views from a list. Anyone can tell me why?
My collegues faced the same case as they help me to find the reason.
I'm sure that there are a few source objetcts in MySQL source.
Any help will be appreciated!!!
khanhmy
Hi all.
I need your help.
I create a linked server on SQL 2005 server using IBMDA400 as provider.
I create a VBscript to update some data on DB2, and issue begin trans and commit trans. Kindly refer to below code.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Set oKCDat = CreateObject("KCDAT.kcdatapi")
Set objConnection = oKCDat.OpenConnection_SQL(strDataSource,strDB, strUserID, strPassword)
Set rs = CreateObject("ADODB.Recordset")
strName = "TEST1"
strTemp1 = "2"
strTemp2 = "3"
intTemp1 = 199
strSQLStatement = "SELECT * FROM QS36F.TEST WHERE PRACNM = ''" & strName & "''"
strUpdSQL = "TEST1 = '" & strTemp1 & "', TEST2 = '" & strTemp2 & "', TEST3 = " & intTemp1
strSQL = "UPDATE OPENQUERY(TESTDB2," & "'" & strSQLStatement & "')" & " SET " & strUpdSQL & ";"
objConnection.BeginTrans
objConnection.Execute(strSQL)
objConnection.CommitTrans
objConnection.Close
Set rs = Nothing
Set oKCDat = Nothing
Set objConnection = Nothing
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
When i run above script, it prompt me an error message;
"Microsoft OLE DB Provider for SQL Server
The requested operation could not be performed because OLE DB provider "IBMDA400" for linked server "TESTDB2" does not support the required transaction interface."
If i run it without "begintrans" and "committrans", it update the data successfully.
Does anyone know about it?
Highly appreciated for above matters.
Regards
I just upgraded my SQL 2000 server to SQL2005. I forked out all that money, and now it takes 4~5 seconds for a webpage to load. You can see for yourself. It's pathetic. When I ran SQL2000, i was getting instant results on any webpage. I can't find any tool to optimize the tables or databases. And when I used caused SQL Server to use 100% cpu and 500+MB of ram. I can't have this.Can anyone give me some tips as to why SQL 2005 is so slow?
View 3 Replies View RelatedHi
We have Sql2005 x64 bit standard edition server installed in windows 2003 64 bit editio server,
currently due to buisness requirements we need to have sql2005 x64 bit enterprise edition, please let me know how do i do the upgrade or change.
is it possible to retain all our custom settings in the standard edition after changing to enterprise edition.
This has to be done for our production and very critical, please help
Thanks
Samuel I
Hi all,
It looks like these options are only available in the SQL Server Management Studio? I installed SQL Server Management Express Studio and I can't even find the DTSWizard.exe on my machine.
Can you please help how I can import data from excel or where can I download the SQL Server Management Studio?
Your prompt response is greatly appreciated.
Thanks!!
Tram
I had to upgrade to SQL2005 when my customer did so. Everything went OK until I had to load additional data to the datamart. The SQL2000 task to load data from flat text files was straight forward and literally took me seconds tyo set up and execute and has never given me problems. I have now spent 3 days straight trying to do the same in SQL2005 going in ever wider circles. I have got SSIS up and going, I saved a dtsx package that won't run without a multitude of errors ranging from truncation errors (which I tried to avoid by meticulously ensuring all field definitions on the import and export side are defined and correct) to errors relating to not being able to connect to the database I am working on or of not having the right security access. I am at my wits end. I need help!
View 8 Replies View RelatedHi,
Yesterday I had posted a query of How to transfer the Data from AS400 files to Sql 2005 tables with DTS and the error I received for the same. I am not able to view the replies since it has been deleted. Pls repost the same. I posted the query expecting for a solution but instead my question was deleted..... the very purpose of forum is defeated.
Regds,
Anu
I'm importing floor machine data from SQL7 into SQL2005 using SSIS. I import the SQL7 data into a SQL2005 master table and then attempt to match the import data with the data in a current table for either update or insert of new machines. The SQL2005 master table was imported from a SQL2000 database. When I run the first Lookup import, it does not recognize the PK matches between the SQL7 import and SQL2005 master and imports all the SQL7 as new machines. The first Lookup branches to a second lookup that checks for changes in the SQL2005 master. When I run the package a second time, the second Lookup treats all the records as updates when it gets to the second Lookup, but should treat these as found. Any suggestions as to why this process is not working properly would be appreciated. Is there a way I can embed a picture of the process from SSIS in this post? Thanks
View 3 Replies View Related
I am using the following query to export data from sql server to ms access in export data wizard:
SELECT * FROM myView where myID = 123
Order by varcharColumnName1,varcharColumnName2 ,intColumnName3
This query will fetch about 7, 00,000 records.
SQL server 2005 shows the correct order, but Data in access table shows Incorrect data.
Please give me the solutions.
One of my report has different data types like decimal,percentage and integer values.
When I exported the report to excel , all the values are showing as "general" data type.
How to get excel data type same as ssrs report data type by default when exported to excel?
Background: In my current company the business users maintain a huge quantity of master data using excel. Then a series of SSIS jobs are edited and manually executed.
Goal: the challenge is to replace this process using MDS. One of the requested features is the possibility for the users to edit or insert new master data using the Web UI or the Excel Add-in and when they are done perform a merge of the master data in the target, in this case in the reporting DB.
The perfect solution for me is something like trigger the execution of a SSIS package to export the data from the subscription views to the reporting DB after the business rules are apply to a specific entity.
I Have a problem when copying data from one server to another in Management studio, I need to create and exact copy of the original because of primary key relationships,
Currently when I export the data the data will run through an insert type statement, which means that all PKs are reissued, rather than being duplicated from the original, How can I be sure that the data will be copied exactly how it is on one server to the other.
Hi
I am new to SSIS and have the following problem. I used the following script to clear data in columns of any CR/LF/Commas and char(0)'s. Can I just transfer this to SSIS and how exactly do I do that? Any help or advice would help.
Function Main()
Dim x
For x=1 to DTSSource.count
If Isnull(DTSSource(x)) = False Then
DTSDestination(x) = replace(replace(replace(Replace(DTSSource(x) , chr(13),""),chr(10),""),chr(0),""),","," ")
Else
DTSDestination(x) = DTSSource(x)
End If
Next
Main = DTSTransformStat_OK
End Function
Andre
I am unable to install 32-bit SQL Server Integration Services on the server due to something that was left behind by the 64-bit version.
I've uninstalled SQL Server 2005 64-bit and when I try to install the 32-bit version of Integration Services, I get this error: "Failed to install and configure assemblies C:Program Files (x86)Microsoft SQL Server90DTSTasksMicrosoft.SqlServer.MSMQTask.dll in the COM+ catalog. Error: -2146233087 Error message: Unknown error 0x80131501 Error descrition: FATAL: Could not find component 'Microsoft.SqlServer.Dts.Task.MessageQueueTask.ServCompMQTask' we just installed."
I can't seem to figure out how to resolve this problem with the COM+ and I can't remember if Integration Services is required.
Can anybody please advise?
Hello,
I have a vb program that include a dts package that has been saved to vb with sql2000 dts wizard and works very good.
Now that I upgrade my website to sql2005, this vb dts package doesn't work.
The error I get is:
Microsoft Data Transformation Services (DTS) Package
Invalid STDGMEDIUM structure
(Microsoft Data Transformation Services (DTS) Package (80040066): Invalid STDGMEDIUM structure
) (Microsoft SQL-DMO (ODBC SQLState: 42000) (80004005): [Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near ')'.)
I searched in the internet how to make dts package in sql2005 and save it to vb and found no information about it.
What Can I do to get the vb code of the dts package I create in sql2005 or how do i migrage the sql2000 vb dts package code to sql2005?
Thanks,
Kubyustus
Hi, I have a problem importing data from SQL Server 2000 'text' columns to SQL Server 2005 nvarchar(max) columns. I get the following error when encountering a transfer of any column that matches the above.
The error is copied below,
Any help on this greatly appreciated...
ERROR : errorCode=-1071636471 description=An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unicode data is odd byte size for column 3. Should be even byte size.". helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC} (Microsoft.SqlServer.DtsTransferProvider)
Many thanks