l am trying to see how to export event veiwer log to database(mssql) and incremental updates.
sql MS server and with window 2000
if anyone knows how to do this in .net or third party software pls let me know.
Hi all,
Can we get the event properties by using a query?
Are there any extended stored procuder to get the above?
Scenario:
>Desktop>Right Click on My Computer
>Go to Manage and click
>Expand System Tools
>Expand Event Viewer
>Application
click on one event.We can get the log info which is the manual procudure.
But now i want to get the event properties through the Query analyzer...
Any help would be great?
Thanks,
OS: Windows 2012 Enterprise
SQL Server: 2012 Enterprise
I was wondering if there is any way all SQL Server error log entries could be automatically written to Windows Event Log.
I tried to save an event viewer file as a .txt format file and when I open the saved file, it's not readable.
Can someone have an idea of what format should I save the event viewer file so I will be able to view it's contents?
Thanks in advance!!
My boss has now decided that he doesnt want to see SQL errors in the event viewer, unless they are actual errors.
The two errors are:
A - When the DB log is truncated it goes into the event viewer as an error. This needs to either not go into the event viewer at all, or be classed as something other than an error.
B - "Sqllib error: Database x is not simple." This one I dont even know what causes it, but the same thing applies, either it shouldnt be logged, or it needs to be logged as something other than an error. Although what does cause this message?
Any help on these would be appresiated
Thanks :)
Hi guys
i am puzzled on how to decipher the below msg on my sql server
Had tried adjusting the settings but apparantly doesnt work
is this due to my license or what other reasons?
Error msg:
17052 :
This SQL Server has been optimized for 8 concurrent queries. This limit has been exceeded by 30 queries and performance may be adversely affected.
sql server : MS SQL Enterprise 8.0
Hi I am getting the following error:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 17052
Date: 4/14/2004
Time: 09:32:05 AM
User: SYSTEM
Computer: BSEW2k01
Description:
Error: 50000, Severity: 5, State: 1
Error Calling StatusToStreet In DCS0 Code 7202
Please help.
Thanks
Hi for everyone!
I need any example to use raise error that write into event Viewer I use WITH LOG directive
but it's no success.
Sincerely.
FAin Boris
Hi
Can anyone tell me what this warning message in the Quotes below...
I get this on one of our servers every 15 minutes in the event Viewer..
Here is the message in the event Viewer..
"Replication of license information failed because the License Logging Service on server PSNJRPDC could not be contacted."
Thanks All,
Venu
Hello Everyone:
I'm in the process of verifying that all functionality in a version 6.5 database is still there in SQL 7.0. After the upgrade, one issue seems different.
When I attach to a SQL 6.5 database, the full username used in the connection is displayed in the Windows NT Event Viewer. But when I attach to the same database in SQL 7, the username shows up in the Event Viewer as 'N/A'. I've verified that audit permissions are set the same on both boxes both under SQL and in User Manager. Any ideas??
Hi All,
I see this error message on one of my servers Event Viewer..Can anyon tell me what it means and how to resolve it..
The library file "C:WINNTSystem32BEPerfDll.dll" specified for the "Backup Exec" service could not be opened. Performance data for this service will not be available. Status code is data DWORD 0.
Thanks,
Venu
I have a stored procedure that I use for call a aspx page from within SQL. The stored procedure itself runs finewith no errors but I keep getting errors in the event viewer everytimeit runs (with .vbs, .NET, .vb6 client) outside Enterprise manager or SQL Query Analyzer.....This is error:Error: 0, Severity: 19, State: 0SqlDumpExceptionHandler: Process 52 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.I think that this is the same problem seen inhttp://www.sqlmonster.com/Uwe/Forum...in-Event-ViewerI've test with XP sp2, W2003 server, SQL 2000 sp3a......on the same machine.ANY SUGGESTIONS??????Thanks--Message posted via http://www.sqlmonster.com
View 3 Replies View RelatedIs there a way to handle an event when the report viewer has completed loading the report? I have handled the report viewer load event but also want to handle an event for when it has completed loading.
I am wanting this because the "report is being generated" message is far off of the screen when I use a large report viewer.
So, on page load I simply make a textbox visible that says "report is being generated". When it completes generating the report, I want it to make that message invisible.
The disposed and unload events don't seem to handle this correctly.
hi,
pls help me define event logs & sql server logs for sql server 2000.
Hi all,
I want send messages(e.g. error description,record count...)to NT event viewer,how can I implement with sql?
thanks
Hi everyone,
I was wondering how do for 'Log Events' info going to Event Viewer Windows visor. Is it possible or it's just only private info for you SSIS.
Thanks for your input,
How do I prevent SQL Server 2000 from posting successful backupcompletion messages to the Windows 2000 Application Event Log?I have scheduled jobs which backup my transaction logs on 50+ databasesand it always writes to the Windows 2000 application event log uponcompletion.Due to the frequency of the jobs it only takes a day for theApplication Log to fill up, which is causing other jobs to get hung upwhen trying to write to it. On my Windows 2000 server, I have theapplication log event viewer setting correctly set as:"When maximum log size is reached - Overwrite events as needed" but forsome reason this setting no longer applies like it did for the pastthree years. SQLServerAgent and MSSQLSERVER both run under a localAdmin account, without a domain.When I researched how prevent SQL Server from logging this type ofmessage, I found that I can use sp_update_alert to disable thismessage, but I cannot findthe message_id to correctly disable this message. In sysmessages, themessage I am trying to suppress iserror:18265severity:10dlevel:128description:Log backed up: Database:%1, creation date(time): %2(%3), first LSN: %4, last LSN: %5, number ofdump devices: %7!d!, device information: (%8).mslangid:1033I tried calling sp_update_alert as follows:exec sp_update_alert @name = 'Log backed up: Database: %1, creationdate(time): %2(%3), first LSN: %4, last LSN: %5, number of dumpdevices: %7!d!, device information: (%8).', @enabled = 0but got the error message:Server: Msg 14262, Level 16, State 1, Procedure sp_update_alert, Line105The specified @name ('Log backed up: Database: %1, creation date(time):%2(%3), first LSN: %4, last LSN: %5, number of dump devices: %7!d!,device inf') does not exist.Looks like it can only handle 128 characters.How can I disable this message from being logged in the ApplicationLog? Or alternatively, how can I get the event viewer to behave asexpected and"Overwrite events as needed"?Thanks,Mike Orlando
View 9 Replies View RelatedHello,
I have almost finished to design my Service Broker application and I found out something strange.
I was tring to handle the Target queue disabled scenario, because I want to save to message that was not sent so I can create an alert to the user to say that some messages as not been sent.
To disable to queue I run:
Alter queue [dbo].[Receivedqueue] with status = off
I had the Event Viewer in front of me and I have seen the suddenly it appeared a lot of this informational events:
Event Type: Information
Event Source: MSSQLSERVER
Event Category: (2)
Event ID: 9724
Date: 15/06/2007
Time: 15:00:47
Description:
The activated proc [dbo].[OnReceived] running on queue TestReceiver.dbo.Receivedqueue output the following: 'The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.'
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
What this message means?
I would like to avoid to have it because it appears a lot of time and I don't want to fill up my Event Viewer!!
I don't know of it is important but in the moment I executed the code there was not CONVERSING conversation and all the queues were empty.
Somebody has seen this error before or I have to send to the forum the [dbo].[OnReceived] code as well?
thankx
Marina B.
I have a question that I hope someone can help with. I am attempting to load my IIS logs into SQL Server using DTS. I have done this sucessfully by manually specifying the source file. I would like to automate this process but, I have been unable to figure out how to do this. The IIS logs changes daily and the file name changes. How do I configure DTS to grab the log for the previous day?
I believe that the solution is to first copy the log to an alternate location then let DTS do it's thing. How do I programatically accomplish this ?
Thanks
kevin
I was wondering if anyone knew of a way to disable the following, SQLISPackage start/finish events sent to windows event logs everytime a SSIS package is executed and completed.
Regards
Ryan Dickson
Hi
I am constantly getting this error message in the Application log after installing SQL 2005 last night followed by SP1 (say 5 times a minutes). See below:
EventType sql90exception, P1 reportingservicesservice.exe, P2 9.0.2047.0, P3 443f5953, P4 sqldumper_unknown_module.dll, P5 0.0.0.0, P6 00000000, P7 0, P8 00e8ed9d, P9 00000000, P10 NIL.
I have reservice packed SQL 2005 but made no difference - it is running on a Windows 2003 server with all the latest MS patches.
Does anyone know the solution or possible solution to this issue?
Thanks
Matt
I have a rather complicated report with lots and lots of textbox and line controls. When I preview the report on the Report Server the layout is all kinds of skewed and all kinds of stuff is out of place. But when I export the report to PDF or TIFF, the output reverts to it's proper form. Why is it doing this? Is there anything that I can do to not make it so ugly when previewing?
View 2 Replies View RelatedQ1: Any way to control which db loads when, and perhaps stop this error from happening? Again- when all is said and done, the report server functions, and I am able to access just fine.
Q2: What kind of recovery is being referred to? Given the message type- I assume it's nothing of concern- probably more to do with a system that doesn't run all the time.
Okay- so I get these two event messages each time I boot.
Below are two error message I see daily with each system boot- the services mentioned do "actually" function, and are running- as not 10 seconds after these messages are logged, the successfully loaded messages appear. It's almost as if report services tries to connect before the databases are up and running.
Basically the sequence (today) was:
1. 05:49:01 Failure Audit (MSSQL$SQLEXPRESS)
2. 05:49:01 Error (Report Server Windows Service (SQLEXPRESS)
3. 05:49:02 Recovery is complete. (EventID 3408 MSSQL$SQLEXPRESS)
4. 05:49:06 Starting up database 'ReportServer'
5. 05:49:09 Server Resumed execution (MSSQL$SQLEXPRESS)
I'm assuming based on the events that Report Server Service attempts to connect to the ReportServer database before it's actually started. Doesn't really explain the failure audit-
1. Failure Audit:
Event Type: Failure Audit
Event Source: MSSQL$SQLEXPRESS
Event Category: (4)
Event ID: 18456
Date: 8/9/2007
Time: 05:49:01
User: <MACHINENAME><LOCALUSER>
Computer: <MACHINENAME>
Description:
Login failed for user '<MACHINENAME><LOCALUSER>'.
[CLIENT: <local machine>]
This is almost immediately followed by this (which I consider a no-brainer, considering the above):
2. Error:
Event Type: Error
Event Source: Report Server Windows Service (SQLEXPRESS)
Event Category: Management
Event ID: 107
Date: 8/9/2007
Time: 05:49:01
User: N/A
Computer: <MACHINENAME>
Description:
Report Server Windows Service (SQLEXPRESS) cannot connect to the report server database.
On the SQL Server the Event Viewer shows the same messages and errors every evening between 22:05:00 and 22:08:00. The following information messages are shown for every database:
"I/O is frozen on database <database name>. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup."
"I/O was resumed on database <database name>. No user action is required."
"Database backed up. Database: <database name>, creation date(time): 2003/04/08(09:13:36), pages dumped: 306, first LSN: 44:148:37, last LSN: 44:165:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{A79410F7-4AC5-47CE-9E9B-F91660F1072B}4'}). This is an informational message only. No user action is required."
After the 3 messages the following error message is shown for every database:
"BACKUP failed to complete the command BACKUP LOG <database name>. Check the backup application log for detailed messages."
I have added a Maintenance Plan but these jobs run after 02:00:00 at night.
Where can I find the command or setup which will backup all databases and log files at 22:00:00 in the evening?
Greetings,
I am developing a package on my local workstation. I have defined two logging service providers. One is for SQL Server and the other is for the Windows Event Log. I am using the Dts.Log method in a script task to write log entries.
Logging is working properly with the SQL Server provider and rows are being inserted into the sysdtslog90 table. However, the only events that are being logged in the Windows Event Log are the package start and end events which I believe SSIS is doing automatically anyway.
Is there something I need to do to enable WIndows Event Log logging other than defining a log provider and making sure it is checked active? Won't SSIS write to two different logs with one Dts.Log call? Any ideas on what might be going wrong with my approach?
Thanks,
BCB
Recently we migrated our environment to 2012.
We are planning to implement Xevents in all the servers in place of Trace files and everything is working fine.
Is it possible to configure Extended event to trigger a mail whenever any event (example dead lock) occurs.
I have gone through so many websites but i never find.
My SQL Server 2005 SP4 on Windows 2008 R2 is flooded with the below errors:-
Date 10/25/2011 10:55:46 AM
Log SQL Server (Current - 10/25/2011 10:55:00 AM)
Source spid
Message
Event Tracing for Windows failed to send an event. Send failures with the same error code may not be reported in the future. Error ID: 0, Event class ID: 54, Cause: (null).
Is there a way I can trace it how it is coming? When I check input buffer for these ids, it looks like it is tracing everything. All the general application DMLs are coming in these spids.
I have been testing with the WMI Event Watcher Task, so that I can identify a change to a file.
The WQL is thus:
SELECT * FROM __InstanceModificationEvent within 30
WHERE targetinstance isa 'CIM_DataFile'
AND targetinstance.name = 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Backup\AdventureWorks.bak'
This polls every 30 secs and in the SSIS Event (ActionAtEvent in the WMI Task is set to fire the SSIS Event) I have a simple script task that runs a message box).
My understanding is that the event polls every 30 s and if there is a change on the AdventureWorks.bak file then the event is triggered and the script task will run producing the message.
However, when I run the package the message is occurring every 30s, meaning the event is continually firing even though there has been NO change to the AdventureWorks.bak file.
Am I correct in my understanding of how this should work and if so why is the event firing when it should not ?
Hi,
In my case I have to log the errors raised by any task in a package to either windows event log, text file or SQL server. Also I need to send an email notifications to a group of people telling them about the error.
Now can I use SSIS package logging for logging the errors into the required destinations. I mean right clicking on the package and selecting Logging, then adding the required log providers and enabling the events for logging into those. I think I have to upfront select the log providers to log the error, I will not have the liberty to log the error to the destination, the name of which is passed as a variable to the package. This is okay with me though.
Now what will a custom log provider help me to do in this case. Also can I somehow configure my package to call the send mail task everytime an error is raised.
Also, one more option can be developing a package that only does the error handling. It will take in the paramters or the error codes and descriptions, the destination to write to and a flag to send mail or not for that particular type of error.
What do you think? Kindly advise.
Thanks in advance for your help and time.
Regards,
$wapnil
Server 2003 SE SP1 5.2.3790 Sql Server 2000, SP 4, 8.00.2187 (latest hotfix rollup)
We fixed one issue, but it brought up another. the fix we applied stopped the ServicesActive access failure, but now we have a failure on MSSEARCH. The users this is affecting do NOT have admin rights on the machine, they are SQL developers.
We were having
Event Type: Failure Audit
Event Source: Security
Event Category: Object AccessEvent ID: 560
Date: 5/23/2007
Time: 6:27:15 AM
User: domainuser
Computer: MACHINENAME
Description:
Object Open:
Object Server: SC Manager
Object Type: SC_MANAGER OBJECT
Object Name: ServicesActive
Handle ID: -
Operation ID: {0,1623975729}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: Domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: User
Client Domain: Domain
Client Logon ID: (0x0,0x6097C608)
Accesses: READ_CONTROL
Connect to service controller
Enumerate services
Query service database lock state
Privileges: -
Restricted Sid Count: 0
Access Mask: 0x20015
Applied the following fix
http://support.microsoft.com/kb/907460/
Now we are getting
Event Type: Failure Audit
Event Source: Security
Event Category: Object Access
Event ID: 560
Date: 5/23/2007
Time: 10:51:23 AM
User: domainuser
Computer: MACHINE
Description:
Object Open:
Object Server: SC Manager
Object Type: SERVICE OBJECT
Object Name: MSSEARCH
Handle ID: -
Operation ID: {0,1627659603}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: user
Client Domain: domain
Client Logon ID: (0x0,0x60D37C1A)
Accesses: READ_CONTROL
Query service configuration information
Query status of service
Enumerate dependencies of service
Query information from service
Privileges: - Restricted Sid Count: 0 Access Mask: 0x2008D
When looking at SQL Server error logs, I noticed that the current error
log had grown to 1MB whereas most of the files are only a few KB.
QUESTION 1: Can I set the max size for an error log file? If so, how?
QUESTION 2: If not, is there a workaround?
Thanks
We recently upgraded to SQL 2005 from SQL 2000. We have most of our issues ironed out however about every 1 minute there is a message in the Application Event log and the SQL log that states:
EVENT ID 18456 Login Failed for the users DOMAIN/ACCOUNT [CLIENT: <local machine>]
This is a state 16 message which I thought meant that the account does not have access to the default database. The account is actually the account that the SQL services run under.
Any ideas? We can't seem to figure this one out. We actually upgraded to 2005 from 2000 and had an error appear after every reboot that prevented the SQL Agent from running(This application has failed to start because GAPI32.dll was not found. Re-installing the application may fix this problem.) We did a full uninstall of SQL and reinstalled fresh and restored the databases from .bak files and that is when the EVENT ID 18546 started occuring every minute.
We don't have any SQL heavy hitters here so please be detailed with any possible solutions. That you very much for any help you can provide!
David
Is there a log or some other tool available in SQL Server 2005 that allows you to see the queries that are being run against the server real-time?
View 5 Replies View Related