Extract Procedure Code
Apr 2, 2007hi anyone can tell me how to extract procedure code from database
nisar
ADVERTISEMENT
Many Lines Of Code In Stored Procedure && Code Behind
Feb 24, 2008Hello,
I'm using ASP.Net to update a table which include a lot of fields may be around 30 fields, I used stored procedure to update these fields. Unfortunatily I had to use a FormView to handle some TextBoxes and RadioButtonLists which are about 30 web controls.
I 've built and tested my stored procedure, and it worked successfully thru the SQL Builder.The problem I faced that I have to define the variable in the stored procedure and define it again the code behind againALTER PROCEDURE dbo.UpdateItems
(
@eName nvarchar, @ePRN nvarchar, @cID nvarchar, @eCC nvarchar,@sDate nvarchar,@eLOC nvarchar, @eTEL nvarchar, @ePhone nvarchar,
@eMobile nvarchar, @q1 bit, @inMDDmn nvarchar, @inMDDyr nvarchar, @inMDDRetIns nvarchar,
@outMDDmn nvarchar, @outMDDyr nvarchar, @outMDDRetIns nvarchar, @insNo nvarchar,@q2 bit, @qper2 nvarchar, @qplc2 nvarchar, @q3 bit, @qper3 nvarchar, @qplc3 nvarchar,
@q4 bit, @qper4 nvarchar, @pic1 nvarchar, @pic2 nvarchar, @pic3 nvarchar, @esigdt nvarchar, @CCHName nvarchar, @CCHTitle nvarchar, @CCHsigdt nvarchar, @username nvarchar,
@levent nvarchar, @eventdate nvarchar, @eventtime nvarchar
)
AS
UPDATE iTrnsSET eName = @eName, cID = @cID, eCC = @eCC, sDate = @sDate, eLOC = @eLOC, eTel = @eTEL, ePhone = @ePhone, eMobile = @eMobile,
q1 = @q1, inMDDmn = @inMDDmn, inMDDyr = @inMDDyr, inMDDRetIns = @inMDDRetIns, outMDDmn = @outMDDmn,
outMDDyr = @outMDDyr, outMDDRetIns = @outMDDRetIns, insNo = @insNo, q2 = @q2, qper2 = @qper2, qplc2 = @qplc2, q3 = @q3, qper3 = @qper3,
qplc3 = @qplc3, q4 = @q4, qper4 = @qper4, pic1 = @pic1, pic2 = @pic2, pic3 = @pic3, esigdt = @esigdt, CCHName = @CCHName,
CCHTitle = @CCHTitle, CCHsigdt = @CCHsigdt, username = @username, levent = @levent, eventdate = @eventdate, eventtime = @eventtime
WHERE (ePRN = @ePRN)
and the code behind which i have to write will be something like thiscmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.AddWithValue("@eName", ((TextBox)FormView1.FindControl("TextBox1")).Text);cmd.Parameters.AddWithValue("@ePRN", ((TextBox)FormView1.FindControl("TextBox2")).Text);
cmd.Parameters.AddWithValue("@cID", ((TextBox)FormView1.FindControl("TextBox3")).Text);cmd.Parameters.AddWithValue("@eCC", ((TextBox)FormView1.FindControl("TextBox4")).Text);
((TextBox)FormView1.FindControl("TextBox7")).Text = ((TextBox)FormView1.FindControl("TextBox7")).Text + ((TextBox)FormView1.FindControl("TextBox6")).Text + ((TextBox)FormView1.FindControl("TextBox5")).Text;cmd.Parameters.AddWithValue("@sDate", ((TextBox)FormView1.FindControl("TextBox7")).Text);
cmd.Parameters.AddWithValue("@eLOC", ((TextBox)FormView1.FindControl("TextBox8")).Text);cmd.Parameters.AddWithValue("@eTel", ((TextBox)FormView1.FindControl("TextBox9")).Text);
cmd.Parameters.AddWithValue("@ePhone", ((TextBox)FormView1.FindControl("TextBox10")).Text);
cmd.Parameters.AddWithValue("@eMobile", ((TextBox)FormView1.FindControl("TextBox11")).Text);
So is there any way to do it better than this way ??
Thank you
When I Use SSIS For Extract From OLAP Database, Then The Error Random Occurred,Error Code = 0x80040E05
May 10, 2007
I have tired for this!
When I use SSIS for extract data from ssas, that means,I use mdx query.
then random error occured.
Hope some one can understand my poor English....
And the Error Info show below.
Code Snippet
Error: 0xC0202009 at Data Flow Task - For Individual User Tech Points, OLE DB Source 1 1 [31]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Analysis Services 2005" Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
Error: 0xC004701A at Data Flow Task - For Individual User Tech Points, DTS.Pipeline: component "OLE DB Source 1 1" (31) failed the pre-execute phase and returned error code 0xC0202009.
Unable To Extract From Stored Procedure
Jul 30, 2007hi everyone ive written a stored procedure which returns a value depending on the i/p parameterive executed it in the object browser but i cant extract it from the stored proc to the front end create procedure checking ( @username varchar(20), @password varchar(20) ,@result int out)asif @username ='admin'set @result = 1else set @result = 0 return @resultGOand this is what i wrote in the code behind SqlCommand check = new SqlCommand("checking",con);//checking is the stored procedure check.CommandType = CommandType.StoredProcedure; check.Parameters.Add(new SqlParameter("@username", SqlDbType.VarChar)).Value = TxtUsername.Value; check.Parameters.Add (new SqlParameter("@password", SqlDbType.VarChar)).Value = TxtPassword.Value; check.Parameters.Add(new SqlParameter("@result", SqlDbType.Int)).Value = 0;int status = ( Convert.toint32 )check.executenonquery();// the line which is prolly causing the error , can u tell me what should be written here? the status returns -1
View 2 Replies View RelatedExtract A String In A Stored Procedure
Jul 20, 2005Is there anyway to extract part of a string in a stored procedureusing a parameter as the starting point?For example, my string might read: x234y01zx567y07zx541y04zMy Parameter is an nvarchar and the value is: "x567y"What I want to extract is the two charachters after the parameter, inthis case "07".Can anyone shed some light on this problem?Thanks,lq
View 4 Replies View RelatedHow To Extract Just One Attribute From A Stored Procedure?
May 21, 2008The my_stored_procedure returns a result set of values for attribute "id" and "name".
My attempt to extract just the id values from my_stored_procedure has a syntax error:
Code Snippetselect id from (execute my_stored_procedure);
I want to use it in a query
Code Snippet
if 32 in (Select id from (execute my_stored_procedure));
select 1 as valid;
What€™s the correct way to do this?
Thank you.
How To Extract Output Parameters From A Stored Procedure.
Jan 25, 2008I am stuck on how to syntactically retrieve an output value (@ProdCount) from a stored procedure. The SPROC works fine: the value of @ProdCount appears correctly in the output window. However, I can't retrieve it in the DAL handler (value remains 0). Does anyone have an idea on how to properly extract the return value. TIA for any pointers.SPROC (abridged): ALTER PROCEDURE and_Store_GetProductsByProdCatID_SortPage (@ProdCatID INT,...@ProdCount INT OUTPUT
)
ASSELECT @ProdCount=(SELECT COUNT(*) FROM and_StoreProduct WHERE ProdCatID= @ProdCatID)DECLARE @SQL nvarchar(4000)SET @SQL = 'WITH tmpProd AS ( SELECT ROW_NUMBER() etc.. )SELECT ProdID, etc..FROM tmpProdWHERE Row BETWEEN etc..ORDER BY etc..'
EXECUTE(@SQL)RETURNDAL handler (abridged): Public Overloads Shared Function GetProductListByCatID(ByVal ProdCatID As Integer, ..., ByVal ProdCount As Integer) As List(Of Product) Dim productList As List(Of Product) = New List(Of Product) Try
Using con As New SqlConnection(ConfigurationManager.ConnectionStrings("conAnders").ConnectionString) Dim cmd As SqlCommand = New SqlCommand("and_Store_GetProductsByProdCatID_SortPage", con) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.AddWithValue("@ProdCatID", ProdCatID) '...
cmd.Parameters.AddWithValue("@ProdCount", ProdCount) ' Output parm. Add dummy value.
Dim objProduct As Product 'Temp Product.
con.Open()
Using myReader As SqlDataReader = cmd.ExecuteReader(CommandBehavior.CloseConnection) While myReader.Read() objProduct = New Product() With objProduct .ProdID = myReader.GetInt32(myReader.GetOrdinal("ProdID")) 'etc..
End With
productList.Add(objProduct)
End While Dim tmp As Object = cmd.Parameters("@ProdCount").Value ' <-- Not updated
myReader.Close() End Using End Using Catch ex As Exception Throw ' Pass up the error.
End Try Return productList End Function
Help With TSQL Stored Procedure - Error-Exec Point-Procedure Code
Nov 6, 2007I am building a stored procedure that changes based on the data that is available to the query. See below.
The query fails on line 24, I have the line highlighted like this.
Can anyone point out any problems with the sql?
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the error...
Msg 8114, Level 16, State 5, Procedure sp_SearchCandidatesAdvanced, Line 24
Error converting data type varchar to numeric.
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the exec point...
EXEC [dbo].[sp_SearchCandidatesAdvanced]
@LicenseType = 4,
@PositionType = 4,
@BeginAvailableDate = '10/10/2006',
@EndAvailableDate = '10/31/2007',
@EmployerLatitude = 29.346675,
@EmployerLongitude = -89.42251,
@Radius = 50
GO
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the STORED PROCEDURE...
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[sp_SearchCandidatesAdvanced]
@LicenseType int = 0,
@PositionType int = 0,
@BeginAvailableDate DATETIME = NULL,
@EndAvailableDate DATETIME = NULL,
@EmployerLatitude DECIMAL(10, 6),
@EmployerLongitude DECIMAL(10, 6),
@Radius INT
AS
SET NOCOUNT ON
DECLARE @v_SQL NVARCHAR(2000)
DECLARE @v_RadiusMath NVARCHAR(1000)
DECLARE @earthRadius DECIMAL(10, 6)
SET @earthRadius = 3963.191
-- SET @EmployerLatitude = 29.346675
-- SET @EmployerLongitude = -89.42251
-- SET @radius = 50
SET @v_RadiusMath = 'ACOS((SIN(PI() * ' + @EmployerLatitude + ' / 180 ) * SIN(PI() * p.CurrentLatitude / 180)) + (COS(PI() * ' + @EmployerLatitude + ' / 180) * COS(PI() * p.CurrentLatitude / 180) * COS(PI()* p.CurrentLongitude / 180 - PI() * ' + @EmployerLongitude + ' / 180))) * ' + @earthRadius
SELECT @v_SQL = 'SELECT p.*, p.CurrentLatitude, p.CurrentLongitude, ' +
'Round(' + @v_RadiusMath + ', 0) AS Distance ' +
'FROM ProfileTable_1 p INNER JOIN CandidateSchedule c on p.UserId = c.UserId ' +
'WHERE ' + @v_RadiusMath + ' <= ' + @Radius
IF @LicenseType <> 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND LicenseTypeId = ' + @LicenseType
END
IF @PositionType <> 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND Position = ' + @PositionType
END
IF LEN(@BeginAvailableDate) > 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND Date BETWEEN ' + @BeginAvailableDate + ' AND ' + @EndAvailableDate
END
--SELECT @v_SQL = @v_SQL + 'ORDER BY CandidateSubscriptionEmployerId DESC, CandidateFavoritesEmployerId DESC, Distance'
PRINT(@v_SQL)
EXEC(@v_SQL)
-----------------------------------------------------------------------------------------------------------------
Please Help With Vb.net Code And Stored Procedure
Jul 2, 2004I have the following stored procedure in sql server 2000:
(@nsn varchar 15 int,
@item_nam varchar 255 ouput
)
AS
declare @stockquantity int
select @stockquantity = stockquantity
from inventory
where stockquantity = 0
select @item_nam = item_nam
from inventory where nsn = @nsn
delete from inventory
where nsn = @nsn
and stockquantity = 0
GO
what would the vb.net code be to display the item_nam if the query was successful in deleting a record, but would then retutrn a different mesage if the item was not deleted becasuse the stockquantity was not equal to zero. Right now it returns the item_nam even if the record wsa not deleted.
ANy help is much appreciated.
Stroed Procedure Code
Sep 29, 2005Hi:
I was working in SQL MS Enterprise Manager. I opened my DB and then tried to write a new Stored procedure(Stroed Procedure-->right click-->new procedure--> blank SP window). I copied some .sql code from VB. It had a beggining line like:
" If exists in Sytemobjects(newprocedure)
drop procedure newprocedure
Create proc newprocedure
as "
----
Now when I am copying this code in Enter Manager, the If part just vanishes and the code starts(opening from Enter Manager) from
Create proc newprocedure.
What is the catch here. I tried to see all other SPs in my DB and none of them has the If part.
What is the wrong. Why it does not take the If part.
Getting A Stored Procedure's Code
Jul 23, 2005I don't know if this is possible. However, what i am attempting to do isusing C#'s window forms. I open up an excell sheet stored in my windowsform. The excel sheet stores names of the stored procedures in thatdatabase. I want to know if it's possible to click on that storedprocedure to open up a link to display the code of that stored procedure ofcourse in a read only mode.any suggestions....
View 2 Replies View RelatedPHP Code To Stored Procedure
Sep 22, 2007hi all,i need to convert these simple PHP code into stored procedure :<?php$result=mssql_query( "SELECT whid, whcode FROM warehouse" );while( $wh = mssql_fetch_object( $result ) ){$result=mssql_query( "SELECT plid, nopl FROM packlist WHERE whid ='" . $wh->whid . "'";while( $pl = mssql_fetch_object( $result ) ){$result=mssql_query( "SELECT qty FROM packlistnmat WHERE plid ='" . $pl->plid . "'";while( $pln = mssql_fetch_object( $result ) ){echo "Stock from " . $wh->whcode . " AND Packing List number " .$pl->plid . " = " . $pln->qty;}}}?>my focus is in nested query, then i can call each field from the query(SELECT whid, whcode...) in sub query.thanks,aCe
View 4 Replies View RelatedHelp FIX BUG In My Sql Code-stored Procedure
Jan 8, 2008help BUG in my sql code
i can not see this employee 111111 whan i run this code
SELECT 111111,1,'19/01/2008','29/01/2008' UNION ALL
TNX
Code Block
------------------------
-- create mod cycle shift pattern
------------------------
DECLARE
@shifts_pattern TABLE
(
[PatternId] [int] IDENTITY(1,1 ) NOT NULL,[patternShiftValue] [int]NOT NULL)
declare
@I int
set
@i=0
while
@i < 5
BEGIN
INSERT INTO @shifts_pattern ([patternShiftValue] )
SELECT 1 UNION ALL
SELECT 2 UNION ALL
SELECT 3 UNION ALL
SELECT 4 UNION ALL
SELECT 5 UNION ALL
SELECT 6 UNION ALL
SELECT 7 UNION ALL
SELECT 8
set
@i=@i+1
end
-- select * from @shifts_pattern
--- end shift pattern
--------------------------------
declare
@empList
TABLE
( [empID] [numeric](18, 0) NOT NULL,[ShiftType] [int]NULL,[StartDate][datetime]NOT NULL,[EndDate] [datetime] NOT NULL) INSERT INTO
@empList ([empID], [ShiftType],[StartDate],[EndDate])
SELECT 111111,1,'19/01/2008','29/01/2008' UNION ALL
SELECT 222222,2,'29/01/2008','30/01/2008' UNION ALL
SELECT 333333,3 ,'27/01/2008','30/01/2008' UNION ALL
SELECT 444444,5 ,'26/01/2008','30/01/2008'
--------------------------------
-- create shifts table
declare
@empShifts
TABLE
( [empID] [numeric](18, 0) NOT NULL,[ShiftDate] [datetime]NOT NULL,[ShiftType] [int]NULL
,[StartDate] [datetime]NOT NULL,[EndDate] [datetime]NOT NULL)
DECLARE
@StartDate datetime
DECLARE
@EndDate datetime
Declare
@current datetime
DEclare
@last_shift_id int
Declare
@input_empID int
--SET
----@StartDate = StartDate
---- last day of next month
--SET
--@EndDate = EndDate
--@StartDate = DATEADD(m ,2,GETDATE()-DAY (GETDATE()) + 1 )
---- last day of next month
--SET
--@EndDate = DATEADD(m ,3,GETDATE()-DAY (GETDATE()) + 1)- 1
--set
--@current = @StartDate
----
----------------- open list table for emp with curser
DECLARE
List_of_emp CURSOR FOR
SELECT
emp.empId,emp.ShiftType,emp.StartDate,emp.EndDate FROM @empList emp
OPEN
List_of_emp
FETCH
List_of_emp INTO @input_empID , @last_shift_id ,@StartDate,@EndDate
-----------------
-- loop on all emp in the list
while
@@Fetch_Status = 0
begin
-- loop to insert info of emp shifts
while
@current<=@EndDate
begin
INSERT INTO @empShifts ([empID],[ShiftDate],[ShiftType],[StartDate] ,[EndDate])
select @input_empID ,@current,shift .patternShiftValue ,@StartDate,@EndDate
from @shifts_pattern as shift where PatternId=@last_shift_id+1
-- if it is Friday and we are on one of the first shift we don't move to next shift type .
if (DATENAME(dw ,@current) = 'Friday' ) and
EXISTS(select ShiftType from @empShifts where ShiftDate=@current and empID= @input_empID and ShiftType in ( 1,2,3))
-- do nothing
--set @last_shift_id=@last_shift_id
print ('friday first shift')
ELSE
set @last_shift_id=@last_shift_id+ 1
set @current=DATEADD( d,1, @current)
end
FETCH
List_of_emp INTO @input_empID ,@last_shift_id,@StartDate,@EndDate
-- init of start date for the next emp
set
@current = @StartDate
end
CLOSE
List_of_emp
DEALLOCATE
List_of_emp
select
empID,shiftDate,DATENAME (dw,shift.ShiftDate ), shiftType from @empShifts as shift
RETURN
Getting T-SQL Code For A Stored Procedure
Nov 3, 2006I need to have my middle tier code get the T-SQL code for a stored procedure. So, I need to create a string something like:
string tsqlCode = @"CREATE PROCEDURE "NSInsertGenerator"
@GeneratorName NVARCHAR(255),
@SystemName NVARCHAR(255),
@ThreadPoolSize INT,
@ActivationState TINYINT
AS
INSERT INTO "NSGenerators"
( GeneratorName, SystemName, ThreadPoolSize, ActivationState)
VALUES(@GeneratorName, @SystemName, @ThreadPoolSize, @ActivationState)
GO"
This string will be analyzed by the middle tier code so that the list of parameters for this procedure will be built dynamically depending on the current version of this stored procedure.
We are using SQL Server 2000 SP4.
Could someone recommend me how I can get T-SQL code of a stored procedure, please?
Thanks a lot!
NEED HELP TO MODIFY STORED PROCEDURE CODE...
Apr 3, 2007Pls check my code for the stored procedure which i created for the companydetails including companyid P.K. Not Null int(4),companyname Not Null varchar (20),address varchar(30) where companyid is the primary key and it should be autogenerate.I also want that it should check if the name exits or not.It should also check that the field is entered and not kept null.If it's null then should return the error message.I want to write the queries select,insert,update and delete in the single stored procedure.How can i differ all the query individually in a stored procedure.The select and insert query are done on the button click event whereas the update,delete queries are performed in the gridview link event. Pls help me and modify my code accordingly with ur suggestions who know
the stored procedure very well.First read what i want then give reply.waiting for the reply and with corrections.The coding is perfomed in sql server 2005 and asp.net with C# 2005, 1 ALTER PROCEDURE CompanyStoredProcedure2 @uspcompanyid int,3 @uspcompanyname varchar(20),4 @uspaddress1 varchar(30), 5 @frmErrorMessage as varchar(256) OUTPUT,6 @RETURNVALUE as int OUTPUT,7 @RETURNID as int OUTPUT8 AS9 declare
10 @companyid int,11 @companyname varchar(20),12 @address1 varchar(30) 13 14 BEGIN15 16 begin17 Select @RETURNVALUE = -918 RETURN -919 end20 21 begin22 Select @frmErrorMessage = 'The Operation Mode Has Not Been Specified'
23 return -924 end25 26 27 28 begin 29 --validation...
30 if (@uspcompanyname is Null or @uspcompanyname = '')31 begin32 Select @RETURNVALUE = -933 select @frmErrorMessage = 'Company Name is empty'
34 return -935 end 36
37 if exists (select companyid from companymaster 38 where upper(companyname) = upper(cast(@uspcompanyname as varchar(20))))39 begin40 select @companyid = companyid from companymaster 41 where upper(companyname)=upper(cast(@uspcompanyname as varchar(20) ) )42 end43 else 44 45 select @companyname= cast (@uspcompanynameas varchar(20))46 select @address1= cast(@uspaddress1 as varchar(30))47 select @companyid = isnull(max(companyid),0) + 1 from companymaster48 49 IF exists(SELECT * from companymaster where companyname=@companyname)50 begin51 Select @frmErrorMessage = 'Record With Company Name ' 52 + @companyname + ' is Already Exisiting For The Company Name ' 53 return -954 end 55 56 -- the following codes inserts
57 begin transaction58 INSERT INTO companymaster59 ( companyname, address1)60 VALUES (@companyname,@address1)61 commit transaction62 63 select @RETURNVALUE = 064 select @RETURNID = @companyid65 66 end67 68 69 -- the following codes edit/updates
70 begin71 UPDATE companymaster 72 SET companyname=@companyname,73 address1=@address1 74 WHERE companyid =cast(@uspcompanyid as int)75 76 select @RETURNVALUE = 077 select @RETURNID = cast(@uspcompanyid as int)78 end79 -- the following codes delete
80 begin81 DELETE companymaster WHERE (companyid = @companyid)82 end 83 84 END 85
Pls help me and modify my code accordingly with ur suggestions who know the stored procedure very well.First read what i want then give reply.
Alter Stored Procedure With Asp.net Code
Dec 23, 2007I have looked all around and I am having no luck trying to figure out how to alter a stored procedure within an asp.net application.Here is a short snippet of my code, but it keeps erroring out on me.Try myCommand.CommandText = "Using " & DatabaseName & vbNewLine & Me.txtStoredProcedures.Text myCommand.ExecuteNonQuery() myTran.Commit()Catch ex As Exception myTran.Rollback() Response.Write(ex.ToString())End Try The reason for this is because I have to propagate stored procedures across many databases and was hoping to write an application for it.Basically the database name is coming from a loop statement and I just want to keep on going through all the databases that I have chosen and have the stored procedure updated (altered) automatically So i thought the code above was close, but it keeps catching on me. Anybody's help would be greatly appreciated!!!
View 3 Replies View RelatedGet Procedure Code Of ALL Procedures In Database
Jun 4, 2008Hello.
Is there a way, through t-sql or through SQL Server Management Studio, to retrieve (or export to file) all procedure code for all my stored procedures?
I would like this for backup reasons. Possible?
Extended Stored Procedure And C Code
Jul 12, 2007Hi,
I am using vs2005, vc++, sql2005 and trying to write a complex extended stored procedure.
It seems I must use switch clrafe for my executable to deploy to sql.
But with clrafe, I can no longer use such c code tools such as typedef structures and pointer manipulation!
But I need to do these things to translate a contiuous block of binary data into a series of field/value pairs to be written to the sql server!!! Doing so externally would mean a severe drop in throughput: going back to the server for each field instead of all as one block!
Is there a technique, or pragma command to allow "unmanaged" c code to reside in a sql extended stored procedure?
Running A Stored Procedure In Code
Apr 14, 2008Hi,
I'm not sure if this is really the right place for this but it is related to my earlier post. Please do say if you think I should move it.
I created a Stored procedure which I want to run from Visual basic (I am using 2008 Express with SQL Sever 2005 Express)
I have looked through many post and the explaination of the sqlConection class on the msdn site but I am now just confussed.
Here is my SP
ALTER PROCEDURE uspSelectBarItemID2
(
@BarTabID INT,
@DrinkID INT,
@ReturnBarItemID INT OUTPUT
)
AS
BEGIN
SELECT @ReturnBarItemID = barItemID
FROM [Bar Items]
WHERE (BarTabID = @BarTabID) AND (DrinkID = @DrinkID)
END
In VB I want to pass in the BarTabID and DrinkID varibles (Which Im grabbing from in as int variables) to find BarItemID in the same table and return it as an int.
What I dont understand is do I have to create a unique connection to my database because it is already liked with a dataset to my project with a number of BindingSources and TableAdapters.
Is there an easier way, could I dispense with SP and just use SQL with the VB code, I did think the SP would be neater.
Cheers.
SqlDataSource Call Stored Procedure In Code-behind
Jul 14, 2006Can someone show me how to use SqlDataSource to call stored procedure in a c# class (a support class for aspx) and not in aspx or code-behind?
View 20 Replies View RelatedExecute Stored Procedure From Code Behind File
Mar 15, 2008hi all
I have to execute the stored procedure from code file
string constr = ConfigurationSettings.AppSettings["ConnectionString"];SqlConnection con = new SqlConnection(constr);con.Open();SqlCommand cmd = new SqlCommand("GetTax",con);cmd.CommandType = CommandType.StoredProcedure;SqlParameter paramFrom = new SqlParameter("@from", SqlDbType.VarChar, 50);paramFrom.Value = "JFK";SqlParameter paramTo = new SqlParameter("@To", SqlDbType.VarChar,50);paramTo.Value = "HOU";SqlParameter paramAirline = new SqlParameter("@Airline", SqlDbType.VarChar,50);paramAirline.Value = "US";SqlParameter rpTax = new SqlParameter("@Tax",SqlDbType.Int);rpTax.Direction = ParameterDirection.Output;cmd.Parameters.Add(rpTax);
insted of this way can i execute stored procedure any other way
like
exec MystoredProc "param1"."param2","param3"
i appreciate u r help
Error When Running A Stored Procedure From My Code
May 9, 2008Hi all, I wonder if you can help me with this. Basically, Visual Web Developer doesn't like this part of my code despite the fact that the stored procedure has been created in MS SQL. It just won't accept that bold line in the code below and even when I comment it just to cheat, it still gives me an error about the Stored Procedure. Here's the line of code: // Define data objects SqlConnection conn; SqlCommand comm; // Initialize connection string connectionString = ConfigurationManager.ConnectionStrings[ "pay"].ConnectionString; // Initialize connection conn = new SqlConnection(connectionString); // Create command comm = new SqlCommand("UpdatePaymentDetails", conn); //comm.CommandType = CommandType.StoredProcedure; // Add command parameters comm.Parameters.Add("PaymentID", System.Data.SqlDbType.Int); comm.Parameters["PaymentID"].Value = paymentID; comm.Parameters.Add("NewPayment", System.Data.SqlDbType.VarChar, 50); comm.Parameters["NewPayment"].Value = newPayment; comm.Parameters.Add("NewInvoice", System.Data.SqlDbType.VarChar, 50); comm.Parameters["NewInvoice"].Value = newInvoice; comm.Parameters.Add("NewAmount", System.Data.SqlDbType.Money); comm.Parameters["NewAmount"].Value = newAmount; comm.Parameters.Add("NewMargin", System.Data.SqlDbType.VarChar, 50); comm.Parameters["NewMargin"].Value = newMargin; comm.Parameters.Add("NewProfit", System.Data.SqlDbType.Money); comm.Parameters["NewProfit"].Value = newProfit; comm.Parameters.Add("NewEditDate", System.Data.SqlDbType.DateTime); comm.Parameters["NewEditDate"].Value = newEditDate; comm.Parameters.Add("NewQStatus", System.Data.SqlDbType.VarChar, 50); comm.Parameters["NewQStatus"].Value = newQStatus; comm.Parameters.Add("NewStatus", System.Data.SqlDbType.VarChar, 50); comm.Parameters["NewStatus"].Value = newStatus; // Enclose database code in Try-Catch-Finally try { conn.Open(); comm.ExecuteNonQuery(); }
View 7 Replies View RelatedGetting Totals From A User Stored Procedure To Asp.net Code
Dec 1, 2003Hi. I have records that have a status of either approved, not approved or unknown. I want to create a crystal report that shows a summary of the records - in short how many of each and what percentage. How can I do this? The approved, not approved and unknown are not number columns so I can't add them to get a total. I know I can create a cursor in T-SQL to get the counts but how do I send them back to the asp.net code?
---------------------
Here is part of the cursor I have created.
IF @@FETCH_STATUS = 0
BEGIN
IF @txtPrintSuit = 'U' SELECT @numUnkCount = @numUnkCount + 1
IF @txtPrintSuit = 'Y' SELECT @numSuitCount = @numSuitCount + 1
IF @txtPrintSuit = 'N' SELECT @numUnsuitCount = @numUnsuitCount + 1
FETCH curs_Briefs INTO @txtPrintSuit
END
------------
How do I get @numUnkCount, @numSuitCount and @numUnsuitCount back to the asp.net application? Can the RETURN statement hold more than one value?
THanks in advance
How To Code ASP.NET Page With Return Value Store Procedure?
Apr 12, 2005Does anyone know how to call a SQL store procedure that return a value to the page?
I've a simple data entry aspx page with several textboxes and a save button. When user fill out the form and click save/submit, it calls a store procedure to insert a row into a SQL table and automatically generate an ID that need to return the the page to display for the user.
Are there a similar article somewhere?
Thank you all!
How To Decrypt The SQL Encrypted Stored Procedure In ASP.NET (i.e.vb Code)
Oct 19, 2005How to Decrypt the SQL Encrypted Stored procedure in ASP.NET (i.e.vb code)Pls let me know ASAP.Thanks.
View 1 Replies View RelatedHow To Hide The Source Code Of Store Procedure?
Feb 22, 1999The problem is as subject line shown.
Please Help.
Thanks for all.
J.H.
T-SQL (SS2K8) :: How To Make Code Into Cursor Within Procedure
Feb 3, 2015i wanna create a procedure for P& L cost sheet , i had done that procedure now include a cursor instead of replacing sql queries .
create procedure pl_test
@fmdate datetime,
@todate datetime,
@categ varchar(2000)
begin
create table #temp
[code]....
how to include cursor on if part and else part
Validating Procedure Code For Missing Tables
Jan 30, 2008Hello. You can compile a proc with a non-existant table. proc compiles do fail though on exsiting tables with non-existing columns.
Anyways, question is, how can you scan thru all procedure code to find tables that do not exist in the database? Is there any new DM feature that provides this info? Meaning, if I have a proc and inside it, refer to a table name that does not exist, I want to know the proc will not execute clean. Can the deferred name resolution be turned off somehow?
Thanks, Burce
Sending Messages To .NET Code From Stored Procedure
Nov 10, 2007
I have some long running stored procedures that I invoke from ADO.NET (using Typed Datasets).
Inside the stored procedure, I like to keep track of the execution by using the PRINT command.
Is there a way of extracting and displaying this PRINT information in .NET during the stored procedure execution?
Writing Code Vs Using Stored Procedure Within SSIS
Aug 7, 2007
Was wondering which is better, writing the SQL code within the execute SQL task or calling a SP from within it with respect to performance? and what is the best practice? Also is there any way to incoporate the logic of a cursur within SSIS?
Thanks
Using Native-code COM From Unsafe CLR Stored Procedure?
Sep 27, 2006Hello, everyone.
I have to make a gateway to access third-party closed-source native-code COM objects. As an interface, SQL Server stored procedures are absolutely perfect for my needs. I decided to use SQL Server 2005 CLR rather than using deprecated extended stored procedures or accessing COM objects directly through SQL Server. (This decision is aided by the fact that the third party has plans to make a .NET version of their COM objects "really soon now" (i.e.: not soon enough). Backporting their new interface to my abstraction layer will be very simple.)
I'm having problems using these COM objects from my SQL Server 2005 CLR stored procedure. When I try to run my stored procedure, I get the error below. It appears that SQL Server/CLR refuses to perform the disk access necessary to load the COM object from disk so that it can instantiate it. (My message continues after the error.)
Msg 6522, Level 16, State 1, Procedure MyStoredProcedure, Line 0
A .NET Framework error occurred during execution of user defined routine or aggregate 'MyStoredProcedure':
System.IO.FileLoadException: LoadFrom(), LoadFile(), Load(byte[]) and LoadModule() have been disabled by the host.
System.IO.FileLoadException:
at System.Reflection.Assembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
at System.Reflection.Assembly.InternalLoadFrom(String assemblyFile, Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm, Boolean forIntrospection, StackCrawlMark& stackMark)
at System.Reflection.Assembly.LoadFrom(String assemblyFile, Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm)
at System.Activator.CreateComInstanceFrom(String assemblyName, String typeName, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm)
at System.Activator.CreateComInstanceFrom(String assemblyName, String typeName)
at UserDefinedFunctions.MyStoredProcedure()
.
I'll outline the steps I performed so far to get the assembly working:
Ensured I was running at SQL Server 2005 compatibility level. (90)
- Installed and configured the third-party COM objects on my devel box and my DB box. They registered themselves properly.
- Enabled CLR in the DB.
- Made sure the DB owner has UNSAFE ASSEMBLY permission.
- Added the TRUSTWORTHY property to the DB. (Yes, this isn't the "correct" way to do it, but I didn't want to deal with code-signing voodoo. Apologies to actual believers in voodoo.)
- Created an Unsafe assembly "MyAssembly" in SQL Server 2005 and Visual Studio 2005.
- Created all the necessary Interop assemblies (by creating a normal (non-SQL) C# project and building my code, and raiding the bin directory).
- Added these Interop assemblies to SQL Server 2005 as Unsafe assemblies.
- In VS2005, built my SQL Project code and deployed successfully.
- Tried running my stored procedure through a Query window, and I got the error above.
I've done many searches. All of the results I've found concern themselves with Web Services and XML serialization, and suggest using sgen.exe. I don't think they're relevant to my problem. A few said I should add my COM DLLs as assemblies to SQL Server, but that is impossible for native code DLLs. I found something that hinted at tblexp.exe, but I didn't understand how that could help me. I already figured out a way to get me the Interop libs.
Efforts at solving:
- Reading webpages for hours on end.
- I tried using sgen.exe to create the XML serialization assembly, but it didn't help.
- I tried adding various native-code DLLs directly as SQL Server assemblies, but you can bet it didn't like that.
- A few other pitiful attempts not worth mentioning.
- Reading this forum. I didn't see anything that applied.
- Posting here.
I really wish Microsoft had meant what they said when they stated that "Unsafe" assemblies can access anything, instead of trying to protect developers from their folly.
Any insights on getting those COM objects to work in my CLR stored procedure? Thank you.
-Tony Flay
It Gives Code Page Error On Creating Stored Procedure !!!!!
Jun 28, 2006Hi
I was transferring objects of my existing database from remote to local and I recieved this error during the DTS process. It was on the transfer of the following stored procedure. I tried to create this SP manually but its giving me the same error and doesn't create it. I don't know how to fix it.
I wonder if somebody can help me! Thanks in Advance
[450] Code page translations are not supported for the text data type. From: 1252 To: 1256.
CREATE PROCEDURE dbo.Novasoft_DL_UpdateDownloadsRating @RatingID int, @DownloadID int, @UserID int, @Rating int, @Comment text, @ReviewDate datetime, @CommentName nvarchar(50) ASUPDATE dbo.Novasoft_DL_DownloadsRating SET [DownloadID] = @DownloadID, [UserID] = @UserID, [Rating] = @Rating, [Comment] = @Comment, [ReviewDate] = @ReviewDate, [CommentName] = @CommentNameWHERE [RatingID] = @RatingID
GO
Store Procedure To Find City And Zip Code By Radius
Mar 20, 2007Hi,
Is anyone has store procedure that find city and zipcode by radius (10 miles, 30 miles, 50 miles.......)
and also table that has all zipcodes. I finded one, but it's look like very old one, not updated since 2005
Thanks
Kate