I need to see the records from two tables where the mobilenumbers are not same.
I have two tables named as messages and subscribers with Id, MobileNumber fields.
Now here I need to see the records where the mobile number exist in one table but not in other table.
Please give me the sql query for this.
with regards
Shaji
How can I fetch only Odd or only even records from a table.The odd or even is depends up on Id (Its a primary key/ Integer).
Is there any query
Please help me!
Shaji
Hi Folks,
How do I right queries to fetch first 10 records, then next 10 and so on..
My table structure is as follows:
Columns
--------
MPAD_ID (IDENTITY INCREMENT YES )
MPAD_EmpCode (Employee Code)
MPAD_Date (Date)
MPAD_Status (Attendance Status i.e. P, A, etc)
Sample Records for the same is given below
MPAD_ID MPAD_EmpCode MPAD_Date MPAD_Status
------- ------------ ---------- -----------
1 1001 11/01/2007 P
2 1001 11/02/2007 P
3 1001 11/03/2007 A
... .. .. ..
14 1002 11/01/2007 P
15 1002 11/02/2007 A
16 1002 11/03/2007 P
Please help me out in writing out this query.
Thanks
Jabez.
i have 'Privious' table as
***Metrics Count***
AccessibilityFilter 1679
Archives 80
Corel 90
DateFilter 1680
and 'Current' table as
***Metrics Count***
AccessibilityFilter 1679
Archives 85
Corel 100
DateFilter 1680
I want to fetch only the mis matched records as below.
***Metrics PreviousCount CurrentCount***
Archives 80 85
Corel 90 100
How to fetch records which throws error?
For example
I'm inserting records from a table to another table, having multiple columns
SampleQuery :
insert into tableB (col1,col2....col10)
select col1,col2....col10 from tableA
* while executing this query im getting error. (like varchar cant convert to numberic)
* Here I have no clue in which column it is
* also dont know which row causes it
I am currently working with C and SQL Server 2012. My requirement is to Bulk fetch the records and Insert/Update the same in the other table with some business logic? How do i do this?
View 14 Replies View Relatedwriting the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
Is it possible to have fetch within a fetch? I am getting this error message "A cursor with the name 'crImgGrp' does not exist." So i separate the process into two stored procedures?
CREATE PROCEDURE TrigSendPreNewIMAlertP2
@REID int
AS
Declare @RRID int
Declare @ITID int
Declare @intIMEmail varchar(300)
Declare crReqRec cursor for
select RRID from RequestRecords where REID = @REID and RRSTatus = 'IA' and APID is not null
open crReqRec
fetch next from crReqRec
into
@RRID
Declare crImpGrp cursor for
select ITID from RequestRecords where RRID = @RRID
open crImpGrp
fetch next from crImgGrp
into
@ITID
while @@fetch_status = 0
EXEC TrigSendNewIMAlertP2 @ITID
FETCH NEXT FROM crImpGrp
into
@ITID
close crImpGrp
deallocate crImpGrp
while @@fetch_status = 0
FETCH NEXT FROM crReqRec
into
@RRID
close crReqRec
deallocate crReqRec
GO
Hello..
i develope a web projects of horoscope or astrology(http://demo.reallianzbussimart.com/allzodiac.aspx), there is an 12 Zodiaz sign and all the data call on this page through the Database , in this page i there is an one sql query ---- (Select Top 1 col from colour order by newid(),Select Top 1 num from number order by newid() ,Select Top 1 days from day order by newid() )
then all data call one by one change ..
when the refresh the page the value of all zodiac is change that is wrong ,,,
so what is the quary that one time in day the value off all zodiac is same next day the value has been change............................................
so please help me /...........
tell what is the process to not data change into the page refresh
Ashwnai
Let's say i have 5 unique RRID's, column APID and ITID
RRID - APID - ITID
1 13 700
2 13 700
3 13 700
4 14 700
5 15 700
If I run the stored procedure below, I get the results above however, I want my result to be
RRID - APID - ITID
1 13 700
2 13 700
3 13 700
4 14 701
5 15 702
I want my cursor to loop at the same APID then assign one ITID then move to the next APID and so on...
Any help is highly appreciated....
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS OFF
GO
ALTER PROCEDURE InsNewEmployeeImpTaskP2
@REID int,
@LOID int,
@RetValintoutput
AS
Declare @RRID int
Declare @APID int
Declare @intREID varchar(20)
Declare @intIMID varchar(20)
Declare crReqRec cursor for
select RRID from RequestRecords where REID = @REID and RRSTatus = 'AC' and APID is not null
open crReqRec
fetch next from crReqRec
into
@RRID
set @APID = (select APID from RequestRecords where REID = @REID and RRID = @RRID)
set @intIMID = (SELECT ImplementationGroup.IMID
FROM ImplementationGroup_Location INNER JOIN
ImplementationGroup ON ImplementationGroup_Location.IMID = ImplementationGroup.IMID INNER JOIN
Applications_ImplementationGroup ON ImplementationGroup.IMID = Applications_ImplementationGroup.IMID where APID = @APID and ImplementationGroup_Location.LOID = @LOID )
insert into ImplementationTasks
(
IMID,
ITStatus,
ITStatusDate
)
VALUES
(
@intIMID,
'2',
GetDate()
)
SET @RetVal = @@Identity
while @@fetch_status = 0
Begin
Update RequestRecords
set ITID = @RETVal, RRStatus = 'IA'
where REID = @REID and RRID = @RRID
FETCH NEXT FROM crReqRec
into
@RRID
end
close crReqRec
deallocate crReqRec
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
i am having an endless loop after the first record.... anything i missed?
ALTER PROCEDURE IMPGrpEscalationX
AS
Declare @IMID int
Declare @IMID2 int
Declare @FS1 int
Declare @FS2 int
Declare crFirst cursor local for
select IMID from ImplementationGroup where IMSTatus = 'Y'
open crFirst
fetch next from crFirst
into
@IMID
begin
Declare crSecond cursor local for
select IMID from Employees_ImplementationGroup where Employees_ImplementationGroup.IMID = @IMID
open crSecond
fetch next from crSecond
into
@IMID2
set @FS2 = @@fetch_status
if not exists(select IMID from Employees_ImplementationGroup where IMID = @IMID2 and IMType = 'T')
Begin
DECLARE @MsgText varchar(700)
DECLARE @IMGRPNAME varchar(50)
Set @IMGRPNAME = (select IMGrpname from ImplementationGroup where IMID = @IMID2)
--SET @MsgText = 'This implementation group has been without a last resort implementer for the past 24 hours. Please click here to assign a last resort implementer: http://xxxx.com/admin/implementationgrp_emps.aspx?imid=' + @IMID2 + '&imgrpname=' + @IMGrpName
EXEC master.dbo.xp_sendmail
@recipients = cccc@ccc.com',
@Message = @IMGRPNAME,
@Subject = 'needs attention'
end
while @FS2 = 0
fetch next from crSecond
into
@IMID2
end
set @FS1 = @@fetch_status
while @FS1 = 0
FETCH NEXT FROM crFirst
into
@IMID
close crFirst
deallocate crFirst
close crSecond
deallocate crSecond
I want to fetch all bills (except cancelled bills) for a given month and fetch the previous bill date.
This is to find out the frequency of a vehicle visit to a workshop.
Sample Data
Division,ChasNo,BillDt,Status
D1,C1,01/01/2015,Null
D1,C1,15/01/2015,Null
D1,C1,23/02/2015,Null
D2,C1,26/02/2015,Null
D2,C2,02/01/2015,Null
D2,C2,16/01/2015,Null
D2,C2,21/02/2015,Null
D1,C3,24/01/2015,Cancelled
Result Expected
D1,C1,23/01/2015,15/01/2015
D2,C1,26/02/2015,Null
D2,C2,21/02/2015,16/01/2015
What I tried is
Declare @Mh smallint,@Yr smallint
Select @Mh=2,@Yr=2015
Select Division,ChasNo,BillDt Into #CMBills from Service_Bills Where Month(BillDt)=@Mh and Year(BillDt)=@Yr and Status Is Null
Select SB.Division,SB.ChasNo,CMB.BillDt as CurBillDt,Max(SB.BillDt) as PreBillDt,Datediff(day,Max(SB.BillDt),Max(CMB.BillDt)) as DiffDays from #CMBills CMB
Left Join Service_Bills SB On SB.Division=CMB.Division and SB.ChasNo=CMB.ChasNo and SB.Status Is Null and SB.BillDt<CMB.BillDt
Group By SB.Division,SB.ChasNo,CMB.BillDt
But I'm not getting details for all the bills I fetched.
I have a stored procedure that inserts one row into a table. From aSELECT statement I would like to call the SP on each row in theresults. Is setting up a cursor and using fetch statements the bestway (or even the only way) to do this?
View 1 Replies View RelatedHello everyone, hope someone can help me with this.I have a SQL stored procedure that inserts a record into a table,creates a cursor to fetch the last record that was added to get theunique key that was created and then writes that and other info to aseparate table. This procedure was working fine at our ISP under NT 4and SQL 7.We recently moved to another ISP on servers that are windows 2000 andSQL 2000. Now this code is going kerplooey. It actually worked finein the staging area but now that it was moved into production, it isnot working. also wanted to mention that the production database wasrestored from a backup. below is the code.the first time this is run it is ok, for example the transactionnumber is 1. the next time it is run, a new record is created in thesweep results with a transaction number of 2. but for some reason,when i declare the cursor to fetch the last record, it goes back tothe transaction number 1 record. so the counts from transaction 1don't match counts from transaction 2 and the next step has an errorcondition and doesn't work.thanks in advance for any help you can provideAnn Williams-- update the sweep results tableINSERT tbl_sweepresults (del_wrkfeedback_count,updnull_feedback_count, swp_feedback_count,swp_count_error, del_error, updnull_error, swp_error, init_error,sweep_date)VALUES (@var_del_wrkfeedback_count, @var_updnull_feedback_count,@var_swp_feedback_count,@var_swp_count_error, @var_del_error, @var_updnull_error,@var_swp_error, @var_init_error, GETDATE())-- create cursorDECLARE tbl_sweepresults_cursor SCROLL CURSOR FORSELECT transaction_no, sweep_date, init_error, updnull_feedback_countFROM tbl_sweepresultsOPEN tbl_sweepresults_cursor-- get transaction number, sweep date, init error, feedback sweepcount and pass to tbl_currentTrans for OPAL comparisonFETCH LAST FROM tbl_sweepresults_cursor INTO @var_transaction_no,@var_sweep_date, @var_init_error, @var_swp_countzeroDELETE tbl_currentTransINSERT tbl_currentTrans (current_transaction_no, current_sweep_date,current_init_error, current_swp_countzero)VALUES (@var_transaction_no, @var_sweep_date, @var_init_error,@var_swp_countzero)-- close the cursorCLOSE tbl_sweepresults_cursorDEALLOCATE tbl_sweepresults_cursor
View 1 Replies View RelatedHi,
I'm using a remote SQL Server Express database with a C# app, and to do so as most of you already know, there's no DataSource available, it's all around SQL. This poses a problem as when I want to browse (1 by 1 in my app, with search utility) the contents of a given table, I have to perform a Select command. Well the problem is when I do this it loads all records into a DataSet (or DataTable), which is fine by me, but one of my tables is expected to reach 400 or 500 records in a few months time. This will mean a lot of loading from the db once the app is launched. Is there a way to make this connection more efective? Thanks
hi,
i want to be able to get the columns from my table except for its pk. the long method is to selecting all columns by listing them one by one right? but what if i got 100 columns..
so.. i wanted to use the information_schema..
i have:
use dbase;
select column_name
from information_schema.columns
where table_name = 'table1'
and column_name != 'pkid'
so there i'm listing the columns, but how am i suppose to select those columns from my real table?
thanks in advance!
I'm trying this code but nothing is being displayedSqlConnection conn = new SqlConnection(ConfigurationManager.AppSettings["STRING_CON"]);
SqlDataAdapter da = new SqlDataAdapter("my_sproc", conn);DataTable dt = new DataTable();
DataRow dr;
//Adding the columns to the datatabledt.Columns.Add("CategoryIdIn");
dt.Columns.Add("CategoryNameVc");foreach (DataGridItem item in gd_freq.Items)
{
dr = dt.NewRow();
dr[0] = item.Cells[0].Text;
dr[1] = item.Cells[1].Text;
dt.Rows.Add(dr);
}//ForEach
da.Fill(dt);
gd_freq.DataSource = dt;
gd_freq.DataBind();
Hi,
I'm relatively inexperienced in sql, and am having trouble interpreting the behavior of a cursor in some code I have inherited. When there is a record in both the Filters and FilterElements tables, the fetch_status is 0. If there is a record in Filters, but no child record in FilterElements, the fetch_status is -1. Since the tables are joined with a RIGHT OUTER JOIN, even when there is no corresponding record in FilterElements, a record is returned (I have verified running the select in a query window). But when used in a cursor, the record is not fetched. The fetch_status is -1. Can anyone tell me why the fetch doesn't work in this case. Thanks
----
DECLARE @CreatedByUser nchar(100), @WorkflowIDs varchar(50);
DECLARE @MyVariable CURSOR;
SET @MyVariable = CURSOR FOR
SELECT isnull(Filters.WorkflowIDs, ''),
isnull(FilterElements.CreatedByUser, '')
FROM Filters RIGHT OUTER JOINFilterElements ON Filters.ItemID = FilterElements.FiltersItemID
WHERE FiltersItemID = @FilterID;
OPEN @MyVariable;FETCH NEXT FROM @MyVariable
INTO @WorkflowIDs, @CreatedByUser;
Hi,
I want ot get time just like this : 8:40:15 AMI am using
select convert(varchar(12),getdate(),8) to get this but this function return 24 Hrs format.
How to achive this by using small coding.
Jasim...
hi,im just a newbie in asp.net.i have my sqldatasource and a label. i want to get the data from sqldatasource to the label. how can i do that.need codes
View 2 Replies View RelatedHi,
I have stored procedure with cursor
I have to use following
step 1 fetch RateValidDates into @Id_RateCode, @TheValidDate
.... get data
step 2 fetch prior from RateValidDates
... condition
step 3 fetch NEXT FROM RateValidDates into @Id_RateCode, @TheValidDate
... go to next record
Sql query analyzer output result of fetch NEXT FROM on the screen
What seeting should i use to avoid output on screen
(The reason My cursor takes about 8000 - 10000 rows when it's open)
I'm having trouble obtaining errors raised in a stored
procedure via the ADO Errors collection after the second
FETCH NEXT statement from within that stored procedure.
Consider the following table created in a SQL Server
database:
CREATE TABLE TestTable
(
TestInt int
)
go
INSERT TestTable(TestInt) values(1)
INSERT TestTable(TestInt) values(2)
INSERT TestTable(TestInt) values(3)
This is a very simple table with one column, and three
rows containing the values 1, 2 and 3.
Consider this stored procedure:
CREATE PROCEDURE TestStoredProc
as
BEGIN
set rowcount 0
Set NoCount ON
declare @TestInt int
declare @ErrMsg char(7)
declare TestCursor cursor forward_only for
select * from TestTable
open TestCursor
Fetch next from TestCursor into @TestInt
While @@fetch_status<>-1
Begin
select @ErrMsg = 'Error ' + convert(char, @testint)
raiserror(@ErrMsg, 16, 1)
raiserror(@ErrMsg, 16, 1)
Fetch next from TestCursor into @TestInt
end
Close TestCursor
DeAllocate TestCursor
return
END
This stored procedure simply defines a cursor on all rows
in TestTable. For each row fetched from the cursor, the
error message 'Error n' is raised twice, where n is the
integer that had just been fetched from the cursor.
Finally, consider this VB code using ADO to execute the
above stored procedure. After the stored procedure is
executed, the code loops through the errors collection,
and creates a message box for each error in the collection:
Private Sub Form_Load()
Dim cn As Connection
Dim cm As Command
Dim oErr As Error
On Error Resume Next
Set cn = CreateObject("ADODB.Connection")
cn.Open "Data Source=<Some SQL Server>; Initial
Catalog=<Some Database Name>; Provider=SQLOLEDB; Persist
Security Info=False; Integrated Security=SSPI"
Set cm = CreateObject("ADODB.Command")
Set cm.ActiveConnection = cn
cm.CommandType = adCmdStoredProc
cm.CommandText = "TestStoredProc"
cm.Execute
For Each oErr In cn.Errors
MsgBox oErr.Description
Next
End
End Sub
When this code is executed, only two message boxes appear
with the message "Error 1".
Any help on this matter would be greatly appreciated :)
it seems that starting with MDAC 2.8 the FETCH NEXT statement for cursors requires an INTO clause. otherwise an unspecified error is returned.
so it's not possible to scroll through the records anymore without storing the values of the fields into local variables?
DECLARE @DocHandle int
DECLARE @XmlDocument nvarchar(1000)
SET @XmlDocument = N'<Attributes><Attribute name="ABCD">50405</Attribute></Attributes>'
EXEC sp_xml_preparedocument @DocHandle OUTPUT, @XmlDocument
SELECT * FROM OPENXML (@DocHandle, '/Attributes/Attribute')
WITH (name varchar(100),
Value varchar(100) '@name/text()[1]' )
EXEC sp_xml_removedocument @DocHandle
THe result of the above query is
nameValue
ABCDABCD
How do we get the value 50405 from the above xml
I dont know the exact position of '/',',','--' or any special character.I have to fetch first name of the country.
create table abc
(country nvarchar(200))
go
INSERT INTO abc VALUES ('Tennessee/Virginia,USA')
GO
INSERT INTO abc VALUES ('Kansas,USA')
[code]...
I want the Numeric Value from Combination of alphabets(a-z,A-Z) , Special Characters and Numeric Value.
example ::
I have '13$23%as25_*' and query should return --> 132325 as result.
Hello All,
I need to find out which user are connected to a What database. For this I can Use SP_WHo. But How can i fetch the required fields only dat too in Query Analyzer
Thank you in advance
My problem is that my:hustyp)[1] only fetches the first occurace of this tag. In my xmlfile this field is a repeating table created in infopath 2007. How do I manage to get the rest dynamically.
------XML-file---------------------------------------
<my:group1>
<my:group2>
<my:hustypTF>5</my:hustypTF>
</my:group2>
<my:group2>
<my:hustypTF>6</my:hustypTF>
</my:group2>
<my:group2>
<my:hustypTF>7</my:hustypTF>
</my:group2>
</my:group1>
-----------------------------------------------------
------T-SQL for fetching data from XML datatype------
WITH xmlnamespaces('http://schemas.microsoft.com/office/infopath/2003/myXSD/2007-01-15T13:29:33' AS my)
SELECT FormData.value('(/my:xxx/my:Formular/my:group1/my:group2/my:hustyp)[1]', 'varchar(99)') AS IdFastBet
FROM MinaDekl
CROSS APPLY FormData.nodes('(/my:xxx/my:Formular/my:group1/my:group2/my:hustyp) as TempTab(testTab1)
-----------------
Hi,I have a table with two columns Task and Employee. It lists all thetasks and the assigned employees. The same task will have multipleroles with an employeename or 'manager' as the data.If I have the following data'sales', 'john''sales', 'manager''dev', 'manager''make_coffee', 'manager''browse', 'jane''browse', 'manager'I need to get the rows wherever an employee is named (sales and browsefor example) and get manager for the rest.I can make it in two queries. Look for not manager in one and then formanager. Is there anyway to get them in a single query?If I need to look for 'sales', I need to get 'john' and not 'manager'.How to do that in a single query?Another need is to list all tasks with assigned. So for the above, Ishould get the following list'sales', 'john''dev', 'manager''make_coffee', 'manager''browse', 'jane'with two queries, I will get'sales', 'john''browse', 'jane''dev', 'manager''make_coffee', 'manager'which is ok. Order/sequence is not important.TIA,Sreelatha
View 2 Replies View RelatedI keep getting the error "Could not fetch a row from OLE DB provider 'VFPOLEDB' when I do a query on a FoxPro Linked Server through SQL 2000. If the query returns 0 rows I don't get an error I just get the structure of the table. But if the query returns rows I get the error. I can replicate this on a test machine but my development machine works fine.
I have checked the SVRNETCN and the CLICONFG apps in SQL Server and they seem to be set the same on both machines. I am using NamedPipes on the server. I tried starting the DTS and that didn't fix the issue.
Would anyone know what I don't have working correctly?
NOTE: I also posted this in the MSDN Newsgroups
I am getting problem in fetching data from SQL using C++ program.
How to Fetch SQL Unicode characters?
I am using ODBC driver calls in C++ to fetch SQL data.
It is working fine with character data.
But for Unicode data it displays €œ????€? instead of data.
I am using SQL Server SQLSRV32.DLL for creating datasource.
Following is my code:
#include <windows.h>
#include <sqlext.h>
#include<srv.h>
#include<stdio.h>
#include <iostream.h>
#include <string.h>
int main(void)
{
void print_err2(RETCODE rc, SQLINTEGER type, SQLHANDLE handle);
HENV hEnv = NULL; // Env Handle from SQLAllocEnv()
HDBC hDBC = NULL; // Connection handle
HSTMT hStmt = NULL;// Statement handle
//UCHAR szDSN[SQL_MAX_DSN_LENGTH] = "myDataSource";// Data Source Name buffer
USHORT *szDSN;
szDSN = (USHORT *) malloc (sizeof(USHORT) * 13);
szDSN= (unsigned short *)"myDataSource";
//UCHAR szUID[10] = "sa";// User ID buffer
USHORT *szUID;
szUID= (unsigned short *) "sa";
//UCHAR szPasswd[10] = "bmcAdm1n";// Password buffer
USHORT *szPasswd;
szPasswd= (unsigned short *) "bmcAdm1n";
char buff[9] = "Testing";
// UCHAR szSqlStr[128]= "INSERT into Quali (Colname) Values ('Testing')" ;
//UCHAR szSqlStr[150]= "select name ,default_database_name,default_language_name from sys.sql_logins" ;
USHORT *szSqlStr;
szSqlStr = (USHORT *) malloc (sizeof(USHORT) * 150);
szSqlStr= (unsigned short *) "select name ,default_database_name,default_language_name from sys.sql_logins" ;
RETCODE retcode;
//UCHAR sqlState; // buffer to store SQLSTATE
// UCHAR errMsg[256]; //buffer to store error message
// SWORD count;
USHORT *sqlState;
USHORT *errMsg;
sqlState= (USHORT *) malloc(sizeof(USHORT)*6);
errMsg= (USHORT *) malloc(sizeof(USHORT)*256);
SDWORD retcode3=NULL; // return code
SDWORD nativeErr; // native error code
SWORD realMsgLen; // real length of error message
// sprintf((char*)szSqlStr,"select name ,default_database_name,default_language_name from sys.sql_logins",buff);
// Allocate memory for ODBC Environment handle
cout<<"hEnv before SQLAllocEnv = "<<hEnv<<endl;
retcode= SQLAllocEnv (&hEnv);
cout<<"retcode= "<<retcode<<endl;
cout<<"hEnv after SQLAllocEnv = "<<hEnv<<endl;
cout<<"***********************";
// Allocate memory for the connection handle
cout<<"hDBC before SQLAllocConnect = "<<hDBC<<endl;
retcode= SQLAllocConnect (hEnv, &hDBC);
cout<<"retcode= "<<retcode<<endl;
cout<<"hDBC after SQLAllocConnect = "<<hDBC<<endl;
cout<<"***********************";
SQLAllocHandle(SQL_HANDLE_DBC, hEnv, &hDBC);
// Connect to the data source using userid and password.
retcode = SQLConnect (hDBC, szDSN, SQL_NTS,szUID, SQL_NTS, szPasswd, SQL_NTS);
cout<<"retcode= "<<retcode<<endl;
if (retcode != SQL_SUCCESS )
{
retcode3 = SQLError(SQL_NULL_HDBC, hDBC, SQL_NULL_HSTMT, sqlState,&nativeErr,errMsg, 256, &realMsgLen);
// print_err(sqlState, nativeErr, errMsg, realMsgLen);
//print_err2(retcode,SQL_HANDLE_DBC,hDBC);
cout<<sqlState<<endl<<nativeErr<<endl<<errMsg<<endl<<realMsgLen;
}
if (retcode == SQL_SUCCESS || retcode == SQL_SUCCESS_WITH_INFO)
{
cout<<"Connection established....!";
// Allocate memory for the statement handle
cout<<"hStmt before SQLAllocStmt = "<<hStmt<<endl;
retcode = SQLAllocStmt (hDBC, &hStmt);
cout<<"retcode= "<<retcode<<endl;
cout<<"hStmt after SQLAllocStmt = "<<hStmt<<endl;
cout<<"***********************";
/*
// Prepare the SQL statement by assigning it to the statement handle
retcode = SQLPrepare (hStmt, szSqlStr, sizeof (szSqlStr));
cout<<"Statement szSqlStr: "<<szSqlStr<<endl;
cout<<"Statement hStmt: "<<hStmt<<endl;
// Execute the SQL statement handle
retcode = SQLExecute (hStmt);
*/
retcode = SQLExecDirect(hStmt,szSqlStr, SQL_NTS);
UCHAR name[4000],defDBnm[4000],defLanguage[4000];
SDWORD retcode2, cbname, cbdefDBnm, cbdefLanguage;
retcode2=NULL;
if (retcode2 == SQL_SUCCESS)
{
retcode2 = SQLBindCol(hStmt, 1, SQL_C_CHAR, name, 4000, &cbname);
retcode2 = SQLBindCol(hStmt, 2, SQL_C_CHAR, defDBnm, 4000, &cbdefDBnm);
retcode2 = SQLBindCol(hStmt, 3, SQL_C_CHAR, defLanguage, 4000, &cbdefLanguage);
}
if (retcode2 != SQL_SUCCESS) /* warning or error returned */
{
retcode3 = SQLError(SQL_NULL_HDBC, hDBC, SQL_NULL_HSTMT, sqlState,&nativeErr,errMsg, 256, &realMsgLen);
//print_err(sqlState, nativeErr, errMsg, realMsgLen);
cout<<sqlState<<endl<<nativeErr<<endl<<errMsg<<endl<<realMsgLen;
}
cout <<"****************************************";
while (TRUE)
{
retcode2 = SQLFetch(hStmt);
if (retcode2 == SQL_SUCCESS || retcode2 == SQL_SUCCESS_WITH_INFO)
{
if (cbname == SQL_NULL_DATA) /* check null data */
printf("name: NULL");
else
printf("Name: %s", name);
if (cbdefDBnm == SQL_NULL_DATA)
printf("defDBnm name: NULL");
else
printf("defDBnm name: %s", defDBnm);
if (cbdefLanguage == SQL_NULL_DATA)
printf("defLanguage: NULL");
else
printf("defLanguage : %s", defLanguage);
}
else if (retcode2 == SQL_ERROR ) /* warning or error returned */
{
retcode3 = SQLError(SQL_NULL_HDBC, hDBC, SQL_NULL_HSTMT, sqlState,&nativeErr, errMsg, 256, &realMsgLen);
//print_err(sqlState, nativeErr, errMsg, realMsgLen);
cout<<sqlState<<endl<<nativeErr<<endl<<errMsg<<endl<<realMsgLen;
}
else /* if no more data or errors returned */
break;
}
// Project only column 1 which is the models
// SQLBindCol (hStmt, 1, SQL_C_CHAR, szModel, sizeof(szModel), &cbModel);
// Get row of data from the result set defined above in the statement
// retcode = SQLFetch (hStmt);
// Free the allocated statement handle
SQLFreeStmt (hStmt, SQL_DROP);
// Disconnect from datasource
SQLDisconnect (hDBC);
}
// Free the allocated connection handle
SQLFreeConnect (hDBC);
// Free the allocated ODBC environment handle
SQLFreeEnv (hEnv);
return 0;
}
void print_err2(RETCODE rc, SQLINTEGER type, SQLHANDLE handle)
{
//SQLCHAR SqlState, *sq = &SqlState[0];
SQLUSMALLINT *SqlState;
SqlState=(SQLUSMALLINT *) malloc (sizeof(SQLUSMALLINT)*6);
SQLUSMALLINT *sq = &SqlState[0];
SQLCHAR Msg[SQL_MAX_MESSAGE_LENGTH], *ms = &Msg[0];
SQLWCHAR SqlStateW, *sqw = &SqlStateW[0];
SQLWCHAR MsgW[SQL_MAX_MESSAGE_LENGTH], *msw = &MsgW[0];
SQLINTEGER NativeError;
SQLSMALLINT i=1, MsgLen;
RETCODE ret;
int j;
printf("Error number is %d", rc);
while (SQL_SUCCEEDED(SQLGetDiagRec(type, handle, i++,(unsigned short *) SqlState, &NativeError, (unsigned short *)Msg, sizeof(Msg), &MsgLen)) )
{
printf("State: %s Native Error Code: %d %s (%d)",
SqlState,NativeError,Msg, MsgLen);
}
}
Regards
Ketaki
Hello,
I am hoping someone can help me with using the cursor and fetch functions. I have not used these features in the past and I am now stuck when trying to use IF statements with the fetch function.
I have a temp table populated with the below headers and their associated data.
The headers are as follows:
ItemRcvdKey, TranID, TranDate, QtyReceived, UnitCost, ItemKey, WhseKey, ItemID, ShortDesc, WhseID, QtyOnHand, StdCost.
The information contained in this temp table lists every single receipt of goods against all of our inventoried items. The QtyOnHand listed on each record is the total QtyOnHand for that item in that warehouse. What I need the fetch to do is grab the receipt of goods records, starting with the most recent TranDate, and pull them into the new temp table until the QtyOnHand is reached. The QtyonHand it should be comparing too is the one listed on the first fetched record. Once the Sum of the QtyRcvd is equal to or is greater than the QtyOnHand for that item I need the fetch to move on to the next item number and perform the same function.
One thing I need to be clear on is that if there are 3 Receipt Records(TranID) for Item A in Warehouse A, the total QtyOnHand will be listed 3 times. I need to make sure that the Fetch is comparing all the records for Item A in Warehouse A to one instance of the QtyOnHand.
The other aspect is that there will be receipt of goods for the same item in multiple warehouses. So I also need the Fetch to be sure that when it is grabbing records and putting them in the temp table, it makes sure it is matching the ItemID and the WhseID with the record it started with.
The current script I have written is below. If you can offer any help I would greatly appreciate it.
Code SnippetDeclare @ItemID VarChar(30),
@QtyOnHand Decimal (16,8),
@WhseID VarChar (6),
@SumRcvd Int,
@TranID VarChar(30),
@TranDate DateTime,
@QtyRcvd Decimal (16,8),
@UnitCost Decimal (16,8),
@ItemKey Int,
@WhseKey Int,
@ShortDesc VarChar (40),
@StdCost Decimal (16,8)
DECLARE Temp_cursor CURSOR FOR
SELECT TranID, TranDate, QtyRcvd,
UnitCost, ItemKey, WHseKey,
ItemID, ShortDesc, WhseID,
QtyOnHand, StdCost
FROM #Temp1 tem
OPEN Temp_cursor
FETCH NEXT FROM Temp_cursor
INTO @TranID, @TranDate, @QtyRcvd,
@UnitCost, @ItemKey, @WHseKey,
@ItemID, @ShortDesc, @WhseID,
@QtyOnHand, @StdCost
WHILE @@FETCH_STATUS = 0
BEGIN -- 0
Insert Into #Temp3
(TranID, TranDate, QtyRcvd,
UnitCost, ItemKey, WHseKey,
ItemID, ShortDesc, WhseID,
QtyOnHand, StdCost)
Values
(@TranID, @TranDate, @QtyRcvd,
@UnitCost, @ItemKey, @WHseKey,
@ItemID, @ShortDesc, @WhseID,
@QtyOnHand, @StdCost)
FETCH NEXT FROM Temp_cursor
INTO @TranID, @TranDate, @QtyRcvd,
@UnitCost, @ItemKey, @WHseKey,
@ItemID, @ShortDesc, @WhseID,
@QtyOnHand, @StdCost
Ok, here is the deal. In T-SQL, an error is handled depending on its severity. For example, a severity of 15 or less (or is it 10 or less? doesn't matter) will only raise a warning that can be caught through the message event. 16 or higher (or whatever) will cause an exception to be thrown on the .NET side, and 20 or higher causes the connection to be closed.So far so good.Now here's my issue: I have a stored procedure that does 2 queries (inside the same SP). Sometimes, the first query will succeed, while the second one will cause an error of severity 16. Again, in .NET that will throw an exception, making me unable to fetch the first resultset (which I require for logging purpose). If the error was, let say, severity 9, I could simply subscribe to the message event to get my error, yet still be able to get the first result set. But unfortunately life isn't perfect, and the error is indeed a severity 16.Anyone know of a way to be able to get the first result set, even if the second query (within the same SP) completly fails?
View 2 Replies View Related