File Task And FTP Task
Apr 17, 2008
I have 2 questions regarding the file system task and the FTP task
File System:
Is there a way to delete a group of files within a directory?
ie: I want to delete all files in directorty c:logs*.txt, is that possible?
If not, is it possible to then call a BAT file without user interaction? I have a batch file that deletes files from a network share, but when I run my SSIS package the user is getting prompted which I can't have do to its going to be scheduled and run daily before anyone gets in the office.
FTP:
Again, batch file question. I have a batch file that is FTP files over from a directory. Is it possible to use the FTP task, to do this? I noticed that it can do one file at a time, but is there a way to bring everything over within that directory or do I need to create a new FTP task for all 200 files?
thanks for any suggestions or recommendations
View 11 Replies
ADVERTISEMENT
Mar 28, 2007
In the Control flow tab, I have an Execute SQL Task that outputs full Result set into a variable of an object type. Now how can I write the contents of the Full Result Set into a text file using Script Task. I also want to format the following way while I output into a file:
Column Name 1 : Column Value
Column Name 2: Column Value and so on
I tried writing the contents of the Object Variable into a file, but the file had an output of single word: System.__ComObject.
Code for Writing the Full Result Set into a Text File
Dim RSsqloutput as String = Dts.Variables("objVariable").Value.ToString
Dim strVal as String = "File completed on " & Now() & vbCrLf & "------------------------------------------------------" & vbCrLf
oLogFile.WriteAllText("C:MyFile.txt", strValue)
oLogFile.WriteAllText("C:MyFile.txt", rsSQLOutput)
I went through this link that explains how to write XML Result Set into a File, But this doesn't help as it writes in XML format.
Would you please give me a hint of code how I can go upon.
View 7 Replies
View Related
Dec 6, 2007
HI, I need to trigger some packages upon existance of specific files in a particular directory. Sound lkike the file watcher task (from SQLIS) would do the job but I am wondering what is the difference of using this tool instead of a for each loop container. I mean, If a file exists in a directory, the for each loop container will detect it. Since the file watcher is not a service, the package containing it needs to ne scheduled on a regular basis for the filewatcher to detect the file, right? So, a for each loop container would do the job? So, waht wouldbe the advantage of using the file watcher task?
Thank you,
Ccote
View 11 Replies
View Related
Nov 7, 2007
A common issue that I run across with clients is they want only want to process a file if it's finished transmitting to the server. This SQL Server 2005 task reads the properties of a file and writes the values to a series of variables. For example, you can use this task to determine if the file is in use (still be uploaded or written to) and then conditionally run the Data Flow task to load the file if it's not being used. You can also use it to determine when the file was created in order to determine if it must be archived.
http://www.pragmaticworks.com/filepropertiestask.htm
View 5 Replies
View Related
Jun 21, 2007
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
View 5 Replies
View Related
Jul 1, 2015
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
View 3 Replies
View Related
May 4, 2006
Hi,
I am trying to create a simple BI Application for SSIS. In Visual Studio 2005 I just get a Data Flow Task from the toolbar and add it to the project. When I double click it I get the following error:
The task with the name "Data Flow Task" and the creation name "DTS.Pipeline.1" is not registered for use on this computer.
Then when I try to delete it it gives this other error:
Cannot remove the specified item because it was not found in the specified Collection.
I am creating this application in an administrator account in this computer, so I doubt the problem is related to permissions. I am running SQL Server 2005 and Visual Studio 2005 in WinXP Tablet PC Edition.
Any suggestions why this is happening and how to fix it?
View 17 Replies
View Related
Feb 21, 2008
I am using the "Transfer SQL Server Objects Task" to copy some tables from database A to database B including data.
The tables, primary key constraints, Foreign key, data and all transfers nicely except for "DEFAULT CONSTRAINTS" on the tables.
I have failed to find any option in the "Transfer SQL Server Objects Task" task to explicitly say "copy default constraints". So I guess logically it should happen automatically but it doesn't. I hope it is not a bug :-)
Any option anyone knows will help.
Thanks.
View 17 Replies
View Related
Mar 12, 2008
I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.
I would like know which method is faster:
Use Execute SQL Task to insert the result set to the target table
Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination)
Could you tell me why then other is slower?
Thanks.
View 7 Replies
View Related
Dec 2, 2005
I have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
View 7 Replies
View Related
Feb 1, 2007
In short, does the €œTransfer SQL Server Objects Task€? support distributed transactions?
In trying to use a €œTransfer SQL Server Objects Task€? in a container using a transaction on the container. The task is set to support the transaction. It is setup to copy table data from several tables from a non-domain server (sql server 2000) to a domain-based server (sql server 2005). I get an error stating, €œThis task can not participate in a transaction€?.
I am wondering if it means exactly what it says €“ this task in SSIS can€™t participate at all. Or does it mean that it won€™t in this scenario for some reason. I attempted a simple copy of data from mssql 2005 to mssql 2005 (same server) and the task still failed). MSDTC appears to be running properly on my machine and such (I can do a simple distributed transaction across linked server to the 2000 server in Query Analyzer (QA)). Also, MSDTC appears to be working on both servers with distributed transaction query tests in QA.
Here€™s the error info€¦
SSIS package "Development BusinessContacts and Products Migration.dtsx" starting.
Information: 0x4001100A at Copy BusinessContacts Data: Starting distributed transaction for this container.
Error: 0xC002F319 at Copy BusinessContacts database table data 1, Transfer SQL Server Objects Task: This task can not participate in a transaction.
Task failed: Copy BusinessContacts database table data 1
Information: 0x4001100C at Copy BusinessContacts database table data 1: Aborting the current distributed transaction.
Information: 0x4001100C at Copy BusinessContacts Data: Aborting the current distributed transaction.
SSIS package "Development BusinessContacts and Products Migration.dtsx" finished: Failure.
The program '[4700] Development BusinessContacts and Products Migration.dtsx: DTS' has exited with code 0 (0x0).
View 9 Replies
View Related
Jun 14, 2006
Hi
I have an application like fetching records from the DataBase(MS Access 2000) and results i have to use in Script Task. At present i have used the record fetching query,connection string in Script itself. I would like to use in Independently. Is there any Tools like (Control Flow Tools like Execute SQL Task) are there to fetch the result set from Acccess and can use the fetching results in Script Task....
Thanks & Regards
Deepu M.I
View 5 Replies
View Related
Oct 2, 2007
I have a stored procedure that is executed via a sql script task that returns a full result set. I map this result set to a variable or object type. Is there a way to use this variable as a data source in a subsequent data flow task?
A.
View 14 Replies
View Related
Mar 6, 2006
I have made one package which extracts data from the source does transformation and submits the data to destination. Subsequently it also updates the required control files.
Now I want to add a functionality :
If the package is executed again it should check the status of previous execution in control file if success mark all tasks disable and stop
if failure mark all tasks at enable and start extracting data and continue further with execution.
I was able to attain similar functionality in SQL Server 2000 using activeX script. What code do I need to write as a part of Script Task in order to attain above functionality.
View 3 Replies
View Related
Sep 21, 2006
Hi everyone,
For first time I'm testing this task and surprisingly, when I try "Edit Package" option:
1)The DTS host failed to load or save the package properly
2)The selected package cannot be opened
3)Error HRESULT E_FAIL has been returned from a call to a COM component
But after these messages you can see all the tasks but they haven't name!!
It seem as if RCW mechanism has failed between managed and unmanaged coded-partially.
I don't dare to follow doing more stuff, I don't know if that package is well-loaded or not from there. ?¿
Any guidance or idea about this?
View 5 Replies
View Related
Mar 7, 2007
1 :Control Flow Excute SQL task: Truncate Table
2: Dataflow Task: Datareader--Script componant--OLE DB Destination (SQL Server 2005--a single table --always around 600,000 rows)
How do I set up a transaction where if there is a failure the Truncate Table command will roll back---and the OLE Destination (A single SQL Server table) will be left the same as before the load started.
Another question with that volume of data --600,000 rows will a truncate table be pratical in a transaction
Any ides welcome
thanks in advance
David
View 3 Replies
View Related
Jun 12, 2007
An Execute SQL task takes 1 min to run a statement "insert into Mytable select * from view_using_joins"
Output: 10,225 rows affected.
But a Dataflow task configured to fetch data from the same view_using_joins into MyTable takes hours to do the same.
Could you please explain why is it so ?
Thanks
Subhash Subramanyam
View 14 Replies
View Related
Dec 20, 2007
Hi,
I'm trying to get a record count out of a databse using OLE DB Source and row count tasks but keep getting an error. I set up a variable as int32 and select the variable name in the row count task and when I go to the Input Columns tab to select a field to count, it gives me this error:
Error at Data Flow Task[Row Count[505]]: The component "Row Count" (505) has forbidden the requested use of the input column with lineage ID 32.
I don't even know what this means?
thanks,
View 4 Replies
View Related
May 14, 2015
I'm copying files to a folder with the naming convention as follows in the source folder:
CM_ABC_MY_TEST.txt
In the destination folder, this filename needs to appear as:
CM_XYZ_MY_TEST.txt
In my File System Task, I'm pretty sure I'm going to need an expression with a replace, substring, etc. But am having a hard time nailing down the exact syntax.
View 10 Replies
View Related
May 9, 2008
In my script task I have the following code. The task I'm trying to accomplish is:
If the filename on FTP can be found in the local archive folder of e: drive then show message "FileAlreadyThere" (I will ultimatley change it to do nothing); if the filename on FTP cannot be found in the local archive folder of e: drive then transfer the file to the local package folder on d: drive.
While the script task is executing I was watching it closely, but the problem i saw is that:
If some files on FTP are already in local archive folder and some are not, then it the files which are already in the archive folder are dumped to the package folder; then after that the files which are not in the archive folder are then dumped to the package folder. But I only want the new files on FTP to be transferred to the package folder for further processing.
Then after this is finished, I saw all the files in the package folder are refreshed one after another, after the first round of refresh the second round starts, after the second round finishes it then stopped. I saw it refreshes itself because the 'Date Modified' of the file changes. And I saw the script task turned green.
I don't see how the code below produced this result. Something is wrong in the logic of the loop? Anyone has any idea why it's behaving the way it is now? And how to change the code to accomplish what I want? Thanks a lot!!
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Imports System
Imports System.IO
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain
Public Sub Main()
Dim cm As ConnectionManager = Dts.Connections.Add("FTP")
cm.Properties("ServerName").SetValue(cm, "ftp2.name.com")
cm.Properties("ServerUserName").SetValue(cm, "username")
cm.Properties("ServerPassword").SetValue(cm, "password")
cm.Properties("ServerPort").SetValue(cm, "21")
cm.Properties("Timeout").SetValue(cm, "0")
cm.Properties("ChunkSize").SetValue(cm, "1000") '1000 kb
cm.Properties("Retries").SetValue(cm, "1")
Dim ftp As FtpClientConnection = New FtpClientConnection(cm.AcquireConnection(Nothing))
ftp.Connect()
ftp.SetWorkingDirectory("/directory")
Dim fileNames() As String
Dim folderNames() As String
ftp.GetListing(folderNames, fileNames)
If fileNames Is Nothing Then
MsgBox("NoFileOnFTP")
Else
Dim fileName As String
For Each fileName In fileNames
If File.Exists("c: emp" + fileName) Then
MsgBox("FileAlreadyThere")
Else
ftp.ReceiveFiles(fileNames, "c: emp", True, True)
End If
Next
End If
ftp.Close()
End Sub
End Class
View 3 Replies
View Related
Aug 18, 2006
Does anyone know how to do this using variables? Everytime I try it, I get the
Error: Failed to lock variable for read access with error 0xc00100001.
I also tried it writing a script and still the same error. If I hard code the values into the variables it works fine but I will be running this everday so that it will pull in the current date along with the filename. So the value of the variables will change everyday. Here is my expression:
@[User::Variable] +(DT_WSTR,4) YEAR( GETDATE() )+"0"+(DT_WSTR,2) MONTH( GETDATE() ) + (DT_WSTR,2) DAY( GETDATE() )
The result:
C:Documents and SettingsmroushDesktopOSU20060818
the 20060818 part will change everyday ie.(tomorrow will be 20060819, next day 20060820 and so on.)
View 6 Replies
View Related
Oct 9, 2006
I am having an issue with the File System Task.
I was wondering if there is a way to 'Move File' with the File System Task inside of a For Each Loop container but to dynamically set the Destination path variable.
Currently, this is what I have:
FileDestinationPath variable - set to C:TestFiles
FileSourcePath variable - set to C:TestFiles
FileNameAndLocation variable - set to blank
For Each Loop Container €“ Iterates through a folder C:TestFiles that has .txt files in it with dates in the file name. Ex: Test_09142006.txt. Sets the file path (fully qualified) to the Variable Mapping FileNameAndLocation.
Script Task (within For Each Loop, first step) €“ Sets the FileDestinationPath to the correct dated folder within C:TestFiles. For example, if the text files I want to move are for the 14th of September, it takes FileDestinationPath and appends the date folder to the end of it. The text files have a date in the file name (test_09142006.txt) and I am picking this apart (from FileNameAndLocation in the For Each Loop) to get the folder date. (dts.Variables(€œUser::FileDestinationPath€?).Value = dts.Variables(€œUser::FileDestinationPath€?).Value & €œ€? Month & €œ_€? & Day & €œ_€? & Year & €œ€?) which gives me €œC:TestFiles 9_14_2006€?.
File System Task (within For Each Loop, second step) €“ This is where the action is supposed to occur. I want it to take the FileDestinationPath and move the FileNameAndLocation file (from the For Loop) into this folder for each run.
Now as for my problem. I want this package to run everyday but it has to set the FileDestinationPath variable dynamically according to that day€™s date. Basically, how do I get this to work since I can€™t hard code the destination path variable from the start? I have the DestinationVariable on the File System Task set to the FileDestinationPath variable, after the script task builds it. However, using FileNameAndLocation as the SourceVariable on my File System Task tells me that the €œVariable €œFileNameAndLocation€? is used as a source or destination and is empty.€?
Let me know if I need to clarify further€¦...I may be missing something very simple. Any help would be greatly appreciated!
View 10 Replies
View Related
Jul 7, 2006
Hey there
Ive built an SSIS package which generates a file from a legacy system and then downloads the file into a designated folder on the server. I need the file watcher task to wait for a the file to completely finish loading before it says it is complete. Currently, as soon as the file is created, the WMI step finishes.
Any help would be greatly appreciated!
Kind Regards
David
View 4 Replies
View Related
Jun 8, 2007
I am able to run SSIS packages as SQL Server Agent jobs with a Control Flow items "File system task", if I move a file (test.txt) from a drive (c on the server (where SQL Agent jobs run) to a subdirectory on the same drive. But, if I try to move a file on a network drive, the package fail.
What I can do to solve this issue.
Bye!
Daniel
View 1 Replies
View Related
Jun 19, 2015
Historically I've always written a VB script to copy a file from a sharepoint library. I don't like this method because I have to input a username & password in the script and maintain a config file.
Yesterday I was playing around with using a file system task. The sharepoint file has a UNC path so why not? I created a simple test package with a single file system task that copies the sharepoint file (addressed via UNC) to another network location. Package runs fine locally.
I try running on our utility server but am getting a "The file name [SHAREPOINT UNC PATH] specified in the connection was not valid" error. Package is running with a proxy on the server and the proxy account has the same permissions to the sharepoint site (so far as I can tell) as me.
View 0 Replies
View Related
Nov 9, 2015
I have created a File System task which is contained in a Foreach Loop Container. I have .bak files that are populating a directory from a maintenance backup plan.
There is a point where I need to delete the .bak file's after I've zipped them all up.
How do I set the SourceVariable to read through the directory and pick up just the .bak file's in the directory to delete.
View 3 Replies
View Related
Jan 26, 2004
I have an issue with a DTS package. We create a zip file and then attach it to emails going out using DTS. The problem is that the attachment, when received, is named using the full path to the file, so it is quite long.
Has anyone seen this before? Is there a way out of this?
I am considering mapping a drive to the share holding the file to be named, but the fact is this will shorten the name but will still result in the path being included.
I am wondering if this is a bug, as I suspect this isn't the default behaviour.
Thank you in advance.
Dave
View 5 Replies
View Related
Feb 7, 2007
Hi
This should be incredibly simple and easy, but I can't find any examples of how to do this.
I just want to make a File System Task move a file, and have the destination be filename + date and time. For example \serversharefilename02072007.txt
What syntax do I use in a variable to make this work?
Thanks
View 16 Replies
View Related
May 8, 2006
Hi, I have to researching of how to accesss package tasks and component using the SqlServer.Dts.Runtime class and so far, I havent found any solution. For example, if you package has a scriptiong task and a data flow task(<- which contains a data source component). Is it possible to use the scripting component to access the data source component in the data flow task and manipulate its properites like sqlcommand etc.
Emmanuel
View 5 Replies
View Related
Feb 26, 2008
I've created my own posting for this. The original post was here, I apologize: http://forums.microsoft.com/forums/ShowPost.aspx?PostID=2906512&SiteID=1
According to the poster it's not possible. But there has to be some way to do it? Reflection (don't know how)?
I need to get a reference to the task host in an SSIS Task component.
Basically the scenario is this:
I have a custom task I have created. However I would like to validate that the ExecValueVariable is infact a string variable during the validate event of the task. I know how to verify its a string variable. But I can't figure out how to read what the user selected (such as User::Myvariable). The only way I've been able to figure out how to do it, but it only works if you open my custom task UI.
What I did is this:
I've implemented IDtsTaskUI and during the initialize section I wrote:
Sub Initialize(ByVal taskHost As TaskHost, ByVal serviceProvider As IServiceProvider) Implements IDtsTaskUI.Initialize
' Store the TaskHost of the task.
Me.taskHostValue = taskHost
Dim myTask As CustomTask= CType(taskHost.InnerObject, CustomTask)
myTask.myTaskHost = taskHost
End Sub
My Task is named: CustomTask. I have a public variable in my task as follows:
Public NotInheritable Class CustomTask
Inherits Task
Implements IDTSComponentPersist
Public myTaskHost As TaskHost = Nothing
Therefore I pass back the taskhost value to the CustomTask class, and voila I have it.
Problem is, this only works if the custom task calls the initialize method, and this only happens when you open the custom editor.
I then do the validation in my CustomTask class and it works fine, but myTaskHost is null/nothing until you actually open the custom task UI
How do I solve this?
View 10 Replies
View Related
Feb 23, 2007
Hi,
I created a package with SQL 2005. The package gets the Access DB and then inserts it into SQL Server.
If I open the package in .NET, I can see the SQL Task and Data Flow Task. The SQL Task has a property sqlstatementsource, which has the necxessary SQL code to create the tables.
How can I tell the SQL Task to recompile the SQL code if I give it another DB name, because the tables differ and don't map in the Data Flow Task
Thanks
View 3 Replies
View Related
Apr 3, 2008
Sometimes we have some pretty serious CPU spikes and I would like to be able to pinpoint the exact issue. I have been able through the DMVs to associate a session with an operating system thread. That's great if I have a batch that's causing the problem with a non NULL sql_handle. However, how do I further narrow down what is going on with the background service broker tasks using the DMVs? Or am I just at the blind mercy of SQL Server at this point? What can I query to know what the heck is going on?
View 10 Replies
View Related
Jul 12, 2006
Hello
I want to move and rename a file and embed the date/time into it, so that each time the package runs a new file is created. For example MyFile_20060712_150000.doc.
Can someone give me a hint how to do this with the File Systen Task SSIS Control Flow Item?
Thanks for an early reply
Regards
Chaepp
View 12 Replies
View Related
