How do you fill out an order form;
there is an Order(OrderID, CustomerID, Subtotal, Tax, Total), Orderdetail(OrderID, ProductID, Qty, UnitPrice, ExtendedPrice)
How do I get those tow together in the same form, which can be called order, or invoice it doesn't matter as long as I can get them in the same form numberd like order 1, then order 2, ect. is it by stored procedure, or by ado.net, or both ? or is there anywhere I can find information? like a book? or website ?
Finding the "pieces of information" I need to successfully install the SQL Server Express edition is so complex. Uninstalls do "not" really uninstall completely, leading to failure of SQL install. Can you suggest a thorough, one-stop site for directions for the order of app uninstalls and then the order for app installs for the following...
SQL Server Express edition
Visual Studios 2005
Jet 4.0 newest upgrade
.Net Framework 2.0 (or should I use 3.0)
VS2005 Security upgrade
Anything else I need for just creating a database for my VS2005 Visual Basic project?
I was trying to use MS Access as my backend db but would like to try SQL Express
In SQL sERVER 2008, I have two fields - Depatment and Employees. I need to sort the result set by employee number ascending order, with following exception
1)when department number = 50 - the preferred order is Employee # - 573 followed by 551-572 (employee # belong to Dept 50 = 551-573)
2)When Department number = 20 – the preferred sort order is Employee # 213-220, followed by Employee # 201-213 (employee # belong to Dept 20 = 201-220)
I never paid much attention to this before but I noticed this today in a new table I was creating.
For tables defined in the tabular model the table properties have something like SELECT Blah FROM TableName ORDER BY Blah Then in the tabular model the table's data is in the same order it was ordered by in the data source for the table.
I have a date table I setup and I noticed it is NOT respecting the sort order.
I have it sorted by DateID which sorts with the oldest date first and newest date as last row.However, the table that is imported and stored in the data model is not in that order.
I can of course manually sort the rows in BIDS/DataTools, but I find this discrepancy odd.
Would this have negative impacts on the EARLIER function for example if the data rows are not in the order specified?
INSERT INTO PurchaseOrder (PurchaseOrderDate, SupplierID) VALUES(@date, @SupplierID)
END
SET @POno = @@IDENTITY
RETURN
However, how do i make it that it will automatically adds item under the POno being gernerated? can i use a trigger so that whenever a Insert for PO is success, it automaticallys proceed to adding the items into the table PurcahseOrderItem?
hi basically what i have is 3 text boxes. one for start date, one for end date and one for order id, i also have this bit of SQL SelectCommand="SELECT [Order_ID], [Customer_Id], [Date_ordered], [status] FROM [tbl_order]WHERE (([Date_ordered] >= @Date_ordered OR @Date_ordered IS NULL) AND ([Date_ordered] <= @Date_ordered2 OR @Date_ordered2 IS NULL OR (Order_ID=ISNULL(@OrderID_ID,Order_ID) OR @Order_ID IS NULL))"> but the problem is it does not seem to work! i am not an SQL guru but i cant figure it out, someone help me please! Thanks Jez
Hi, We got a problem. supposing we have a table like this:
CREATE TABLE a ( aId int IDENTITY(1,1) NOT NULL, aName string2 NOT NULL ) go ALTER TABLE a ADD CONSTRAINT PK_a PRIMARY KEY CLUSTERED (aId) go
insert into a values ('bank of abcde'); insert into a values ('bank of abcde'); ... ... (20 times)
select top 5 * from a order by aName Result is: 6Bank of abcde 5Bank of abcde 4Bank of abcde 3Bank of abcde 2Bank of abcde
select top 10 * from a order by aName Result is: 11Bank of abcde 10Bank of abcde 9Bank of abcde 8Bank of abcde 7Bank of abcde 6Bank of abcde 5Bank of abcde 4Bank of abcde 3Bank of abcde 2Bank of abcde
According to this result, user see the first 5 records with id 6, 5, 4, 3, 2 in page 1, but when he tries to view page 2, he still see the records with id 6, 5, 4, 3, 2. This is not correct for users. :eek:
Of course we can add order by aid also, but there are tons of sqls like this, we can't update our application in one shot.
So I ask for your advice here, is there any settings can tell the db use default sort order when the order by column value are the same? Or is there any other solution to resolve this problem in one shot?
Hi,guys!I have a table below:CREATE TABLE rsccategory(categoryid NUMERIC(2) IDENTITY(1,1),categoryname VARCHAR(20) NOT NULL,PRIMARY KEY(categoryid))Then I do:INSERT rsccategory(categoryname) VALUES('url')INSERT rsccategory(categoryname) VALUES('document')INSERT rsccategory(categoryname) VALUES('book')INSERT rsccategory(categoryname) VALUES('software')INSERT rsccategory(categoryname) VALUES('casus')INSERT rsccategory(categoryname) VALUES('project')INSERT rsccategory(categoryname) VALUES('disert')Then SELECT * FROM rsccategory in ,I can get a recordeset with the'categoryid' in order(1,2,3,4,5,6,7)But If I change the table definition this way:categoryname VARCHAR(20) NOT NULL UNIQUE,The select result is in this order (3,5,7,2,6,4,1),and 'categoryname 'in alphabetic.Q:why the recordset's order is not the same as the first time since'categoryid' is clustered indexed.If I change the table definition again:categoryname VARCHAR(20) NOT NULL UNIQUE CLUSTEREDthe result is the same as the first time.Q:'categoryname' is clustered indexed this time,why isn't in alphabeticorder?I am a newbie in ms-sqlserver,or actually in database,and I do havesought for the answer for some time,but more confused,Thanks for yourkind help in advance!
Hi, We got a problem. supposing we have a table like this:
CREATE TABLE a ( aId int IDENTITY(1,1) NOT NULL, aName string2 NOT NULL ) go ALTER TABLE a ADD CONSTRAINT PK_a PRIMARY KEY CLUSTERED (aId) go
insert into a values ('bank of abcde'); insert into a values ('bank of abcde'); ... ... (20 times)
select top 5 * from a order by aName Result is: 6 Bank of abcde 5 Bank of abcde 4 Bank of abcde 3 Bank of abcde 2 Bank of abcde
select top 10 * from a order by aName Result is: 11 Bank of abcde 10 Bank of abcde 9 Bank of abcde 8 Bank of abcde 7 Bank of abcde 6 Bank of abcde 5 Bank of abcde 4 Bank of abcde 3 Bank of abcde 2 Bank of abcde
According to this result, user see the first 5 records with id 6, 5, 4, 3, 2 in page 1, but when he tries to view page 2, he still see the records with id 6, 5, 4, 3, 2. This is not correct for users. Of course we can add order by aid also, but there are tons of sqls like this, we can't update our application in one shot. So I ask for your advice here, is there any settings can tell the db use default sort order when the order by column value are the same? Or is there any other solution to resolve this problem in one shot?
I have created view by jaoining two table and have order by clause.
The sql generated is as follows
SELECT TOP (100) PERCENT dbo.UWYearDetail.*, dbo.UWYearGroup.* FROM dbo.UWYearDetail INNER JOIN dbo.UWYearGroup ON dbo.UWYearDetail.UWYearGroupId = dbo.UWYearGroup.UWYearGroupId ORDER BY dbo.UWYearDetail.PlanVersionId, dbo.UWYearGroup.UWFinancialPlanSegmentId, dbo.UWYearGroup.UWYear, dbo.UWYearGroup.MandDFlag, dbo.UWYearGroup.EarningsMethod, dbo.UWYearGroup.EffectiveMonth
If I run sql the results are displayed in proper order but the view only order by first item in order by clause.
Has somebody experience same thing? How to fix this issue?
insert into test_sort values('Non-A'); insert into test_sort values('Non-O'); insert into test_sort values('Noni'); insert into test_sort values('Nons');
then execute the following selects: select * from test_sort order by cast( 1 as nvarchar(75));
select * from test_sort order by cast( description as nvarchar(75));
hi, how can i fill dropdownlist through code not through visit.and i need to know which is fastest and easy way for web application throught this below query. cmd.Connection = conn conn.Open()Dim ds As New DataSet cmd.CommandText = "SELECT Emp_Name,Emp_ID FROM Employee " da.Fill(ds, "data") cmd.ExecuteNonQuery() conn.Close()
Currently we have tables (in sql 6,5), many of them do not have primary keys. While I was trying to re-index (re-org), many of them got an error: "fillfactor 204 is not a valid percentage; fillfactor must be between 1 and 100." (many tables' fillfactor exceed 100 or more...) How can I fix them so I can upgrade to sql 7 ? Thank you for your help.
I am really confused about this whole fill factor thing. The way I understand it, is if you have a table whose data remains pretty much static, you should use a higher fill factor. Suppose you had a database where you had at most 150 transactions a day that changed the data, should the fill factor be left at the default(0) or increased? How do you determine how much to increase it? Is there a rule of thumb that suggests if you have x number of changes against a table, you should have a fill factor between y and z percent?
Hi all, While creating indexes for a table, I specified a fill factor of 70%. I then inserted a few hundred rows into the table. Is it possible to check to what percent the pages are full after the rows have been inserted?
You have a db with 50,000 records and you want to add 100,000 more. What should the right fill factor be? Is there a way to "calculate" a fill factor if you don't want to use default? Any help is appreciated. Thank you.
I have a web online table that is inserted about 1500 record one day. Each night, a DST is running to pull all data to anther database. How to set fill factor on a one column index to get the best performance? Current fill factor is 80%.
Hi experts, I would like to ask regarding FILL FACTOR. I observed that our system's loading is a bit slow, and some of the modules take 1 to 2 minutes loading. Maintenance activity is regularly executed based on the scheduled sets. Then I tried to checked the tables indexes/keys turns out that the FILL FACTOR is set to ZERO(0). I would like to know if the FILL FACTOR set to zero will be a factor for the system to slow down..????
I have one complicated problem with SQL data files. Say that we have four data files:
F1=2000MB F2=1000MB F3=3000MB F4=1500MB
We want to add 3000 MB on these files, and in the same time we want to make the files proportional one with each other:
Will do:
F1 + 500=2500MB F2 + 1500=2500MB F4 + 1000=2500MB
With my logic, the final result we’ll be:
F1=2500 MB F2=2500 MB F3=3000MB F4=2500MB
There is an algorithm or a formula to calculate the right value to add to each F1, F2….Fn files having S1, S2….Sn sizes for a T total value to add? Thank you in advance.
P.S. The problem can be complicated when we deal with more than one filegroups and with disk space availability.
All,SQL Server uses a proportional fill method to add data to file groups wherea file group has multiple files. In general this is a good thing.Unfortunately, the method appears to get switched off when new file(s) isadded. Other than exporting the data out of the filegroup, recreating thefilegroup and putting the data back in, is there a way to respread theexisting data back out and switching the proportional fill method back on?Thanks,Danny
I have a very complicate problem with SQL data files. Say that we have four data files:
F1=2000MB
F2=1000MB
F3=3000MB
F4=1500MB
I want to add 3000 MB on these files, and in the same time I want to make the files proportional one with each other:
F1 + 500=2500MB
F2 + 1500=2500MB
F4 + 1000=2500MB
At the end I€™ll have:
F1=2500 MB
F2=2500 MB
F3=3000MB
F4=2500MB
I need and algorithm or a formula to calculate the values to add to each files F1, F2€¦.Fn files having S1, S2€¦.Sn sizes, for a T total value to add. Can anyone help me? Thank you in advance.
Hello guys! I am relavtively new to ASP.NET programming ang was just starting out on my first project. I am using ASP.NET2.0 technology by using Visual Web Developer 2005 Express Edition and of course with SQL 2005 Express Edition. I would like to develop a database for our IP addresses, so one field of my table in a SQL data is the field for IP addresses.I would like to write a program wherein after clicking the button, that field will be automatically filled up with IP addresses (e.g, from 192.168.0.0 to 192.168.0.255).How do I accomplish this kind of dynamic filling up of fields? Thanks a lot!
I have a databound dropdownlist that returns an integer (listID) I have a listbox that should return all the people on a membership list that aren't on the committee list with the ListID returned by the dropdownlist. The listbos code is:<asp:ListBox ID="ListBox1" runat="server" DataSourceID="SqlDataSource2" DataTextField="ListID" DataValueField="ListID"></asp:ListBox> SqlDataSource2 code is:<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:mainshipsystemsConnectionString %>" ></asp:SqlDataSource> When the user clicks on the button for the dropdownlist to make their list selection I have the following in the code behind:Protected Sub BtnSelect_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles BtnSelect.Click 'make visible panel containing code to move members Dim sListID As Integer = DDLGetList.Text SqlDataSource2.SelectCommand = "SELECT MemberID, First, Last, Prefix, Suffix FROM Mainship.CE_Members WHERE (MemberID NOT IN (SELECT MemberID FROM Mainship.CE_Emails WHERE (ListID = 1)))" End Sub I get the following error:Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Web.HttpException: DataBinding: 'System.Data.DataRowView' does not contain a property with the name 'ListID'.I have listID = 1 in the above example for testing purposes. Diane
I'm reading XML data into a DataTable that is populated into a datagrid. From here I need to update database and wanted to know how to Fill a DATA ADAPTER with a DATA TABLE? I'm familiar with updating using a SQL command, but in this case, i have the dataTable already created from XML. Please help. Thanks,
hi i have a table with Id and otehr fields,ID is autogenerate with datatype int. But now i want to generate an Id in AU001 format and then want to insert into table where it must be autogenerate.How to do this. Please help me with the problem,its very urgent....
SQL Server does not exist or access denied. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: SQL Server does not exist or access denied.Source Error:
Line 41: DataSet dataset = new DataSet();Line 42: Line 43: dataAdapter.Fill(dataset, "Products");Line 44: SqlCommandBuilder bldr = new SqlCommandBuilder(dataAdapter);Line 45: Source File: e:asp.net egisteration egister.aspx.cs Line: 43 Stack Trace:
SqlDataAdapter dataAdapter = new SqlDataAdapter(strCommand, strConnection);
DataSet dataset = new DataSet();
dataAdapter.Fill(dataset, "Products");
SqlCommandBuilder bldr = new SqlCommandBuilder(dataAdapter);
DataTable dataTable = dataset.Tables[0];
dgCustomer.DataSource = dataTable;
dgCustomer.DataBind();
} }
when i run this code, error like this appear :
Server Error in '/Registeration' Application.
SQL Server does not exist or access denied. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: SQL Server does not exist or access denied.Source Error:
Line 41: DataSet dataset = new DataSet();Line 42: Line 43: dataAdapter.Fill(dataset, "Products");Line 44: SqlCommandBuilder bldr = new SqlCommandBuilder(dataAdapter);Line 45: Source File: e:asp.net egisteration egister.aspx.cs Line: 43 Stack Trace:
