hi all
how to find the continuous date from the given date range in sqlserver 2005
e.g.
2007-01-27 and 2007-02-02 and
output should be
2007-01-27
2007-01-28
2007-01-29
2007-01-30
2007-01-31
2007-02-01
2007-02-02
any suggestion?
I have a database were a client can have many addresses. Clients may be at one address or another at different time of the year. The table allows for entering a startdate and an enddate for each address. I'm trying to figure out the best way to filter on this to return only the current address. I have tried the Where clause below but I'm not sure this is what i should use. The year is not needed but the datatype is datetime. I think i need to use the startdate also, but I cannot seam to get how to filter this. If anyone has ideas I would like to hear them.
Thank you,
A.Selected=1 AND A.EndDate Is Null OR DatePart(m,A.Enddate) >= DatePart(m,GETDATE()) AND DatePart(d,A.Enddate) >= DatePart(d,GETDATE())
We have records in one table that are marked as accepted/rejected based on eligibility start and end dates in another table. We're loading new eligibility data into an ETL table and if the start or end date is going to change, I want to report any records that need to be reviewed to see if their status should change. The new dates could be before or after the existing dates, and the new or existing end date could also be NULL. Currently I'm using 4 > < statements and it seems to catch any scenario, but I'm wondering if there's a better way:
DECLARE @RECORDS TABLE(RecordDate date,ID varchar(8))
INSERT INTO @RECORDS(RecordDate, ID)VALUES('20100101','99'),('20110101','99'),('20120101','99'),('20130101','99'),('20140101','99')
DECLARE @ORIGINALDATES TABLE(StartDate date,EndDate date,ID varchar(8))
INSERT INTO @ORIGINALDATES(StartDate,EndDate, ID)VALUES('20100101',NULL,99)
[code]....
I have 2 tables, one is table A which stores Resources Assign to work for a certain period. The structure is as below
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
The table B stores the item process time. The structure is as below
Item ProcessStartDate ProcessEndDate
V 2015-04-01 09:30:10.000 2015-04-01 09:34:45.000
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
A 2015-04-01 16:40:10.000 2015-04-01 16:42:45.000
B 2015-04-01 16:43:01.000 2015-04-01 16:45:11.000
C 2015-04-01 16:47:00.000 2015-04-01 16:49:25.000
I need to select the item which process in 2015-04-01 16:40:00 and 2015-04-01 17:30:00. Beside that I need to know how many resource is assigned to process the item in that period of time. I only has the start date is 2015-04-01 16:40:00 and end date is 2015-04-01 17:30:00. How I can select the data from both tables. There is no need for JOIN, just seperate selections.
Another item process time is in 2015-04-01 10:00:00 and 2015-04-04 11:50:59.
The result expected is
Table A
Name StartDate EndDate
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
A 2015-04-01 16:30:10.000 2015-04-01 16:32:45.000
B 2015-04-01 16:33:01.000 2015-04-01 16:35:11.000
C 2015-04-01 16:37:00.000 2015-04-02 16:39:25.000
Scenario 2 expected result
Table A
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
hi basically what i have is 3 text boxes. one for start date, one for end date and one for order id, i also have this bit of SQL
SelectCommand="SELECT [Order_ID], [Customer_Id], [Date_ordered], [status] FROM [tbl_order]WHERE (([Date_ordered] >= @Date_ordered OR @Date_ordered IS NULL) AND ([Date_ordered] <= @Date_ordered2 OR @Date_ordered2 IS NULL OR (Order_ID=ISNULL(@OrderID_ID,Order_ID) OR @Order_ID IS NULL))">
but the problem is it does not seem to work! i am not an SQL guru but i cant figure it out, someone help me please!
Thanks
Jez
We have a table in our legacy database system representing health insurance polices. The customer can, and usually does, renew the policy after 12 months. The legacy database uses the renewal string "99/99/9999" to signify "continuous until cancelled", in other words, "forever", or until cancelled
We need to convert this legacy table into a sql 2005 table, which supports the concept of "forever". But how can we do this? ("99/99/999" is not a valid sql date type and we don't want to use varchar for dates.)
TIA,
barkingdog
I am attempting to write a SQL query that retrieves info processed between two times (ie. 2:00 pm to 6:00 pm) during a date range (ie. 8/1/06 to 8/14/06)... I am new to SQL and am perplexed... I have referenced several texts, but have not found a solution. Even being pointed in the right direction would be greatly appreciated!!
View 6 Replies View Relatedhi
COMPUTER-1
IP ::::: 129.100.100.5
COMPUTER NAME IS ::::: HASH
MEMBER OF DOMAIN
in this computer sqlserver express edition is installed, i want to remove this express becoz in configuration manager it show two SQLSERVER'S are running. when i browse from COMPUTER - 2 for network servers it show server name as HASH/SQLEXPRESS, but not the main SQLSERVER.
COMPUTER -2
IP::::129.100.100.142
COMPUTER NAME::: FEROZ
MEMBER OF WORKGROUP
can anyone help me how to connect these two computers and remove this express edition
iam new to sqlserver configuration
thanks in advance
waiting for eager reply
My goal is to select values from the same date range for a month on month view to compare values month over month. I've tried using the date trunc function but I'm not sure what the best way to attack this is. My thoughts are I need to somehow select first day of every month + interval 'x days' (but I don't know the syntax).In other words, I want to see
Select
Jan 1- 23rd
feb 1-23rd
march 1-23rd
april 1-23rd
,value
from
table
I have a QA Deployment Date field that is being returned in a custom report I created. I also found a sample date range parameter:
What I want to accomplish:
I want to select a From and To Date and filter the report to only display the rows that have the QA Deployment Date within the selected range.
For example.. I want to select From Date (8/1/2105) and To Date (8/31/2015) and I only want to return only the results that have a QA Deployment date between that selected range.
Hi there:
This one's a bit tricky. I want to be able to take an IP address of a request on my website and find it in a table. Specifically, I need to be able to record IP address RANGES for search engines so that when they attempt to find a page that isn't there, I can programmatically send a 404 header instead of give them the human-friendly page (please don't make suggestions on this - I'm using PHP, etc., and can't send both a 404 header and a human-friendly page).
Anyway. Let's say a search engine has the IP range 33.33.0.0 through 33.33.255.255 (I made that up). if I receive a request from IP 33.33.101.221, how can I store ONE record (as either a regular expression or maybe multiple fields or somehow else) so that I can match that IP? I'm normally pretty good at figuring stuff like this out, but this one has me stumped for the moment.
All help is greatly appreciated.
I'll be posting a similar request on the PHP forum - I hope that's not considered cross-posting.
Jay
Date parameter. I created a report that allows a drop down for a date range to be selected. However, whenever I preview the report, I get an error. I know my error stems from my date fields being in this format "201301" , and the "date/ time" in SSRS being mm/dd/yyyy on the drop down calendar in SSRS.
I know the direction I want to go in, but just a little confused on where would I use the convert or cast function. Would it be in the data parameter itself, or a part of the query before the @start date and @End date?
I would like to be able to search by a single date, @StartDate, or by a date range , between @StartDate and @EndDate. I am having a hard time with the logic on this for a report in SSRS.
View 5 Replies View RelatedI have to display the last temperature reading from an activity table for all the dates in a selected date range.So if I select the date range from 09/01/2012 to 09/30/2012, the results should look like this:
Date Temperature
09/01/2012 73.5
09/02/2012 75.2
09/03/2012 76.3
09/04/2012 73.3
09/05/2012 77.0
09/06/2012 74.5
and so on.
I am using this to get the dates listed:
WITH CTE_DatesTable
AS
(
SELECT CAST('20120901' as date) AS [Date]
UNION ALL
SELECT DATEADD(dd, 1, [Date])
FROM CTE_DatesTable
WHERE DATEADD(dd, 1, [Date]) <= '20120930'
)
SELECT [Date]
FROM CTE_DatesTable
How could I get the temperature if I did a sub-query here?
I have a report that I need to run on 2 different date ranges.
Both report's data is 2 days behind today's date.
so...
WHERE reportdate between dateadd('d',date(),-2) and dateadd('d',date(),-2)
OR SOMETHING LIKE THAT, NO BIGGIE HERE
The 2nd report is a month to date report. This is the 1 I can't figure out.
WHERE reportdate between (the first day of this month) and dateadd('d',date(),-2)
So that would look like
WHERE reportdate between 1/1/2007 and 1/21/2007
My problem is, if today is the 1st day of the month... how can I get my critiera to NOT do this
WHERE reportdaye between 2/1/2007 and 1/30/2007
Any help would be greatly appriciated!
Hi Group!I am struggling with a problem of giving a date range given the startdate.Here is my example, I would need to get all the accounts opened betweeneach month end and the first 5 days of the next month. For example, inthe table created below, I would need accounts opened between'5/31/2005' and '6/05/2005'. And my query is not working. Can anyonehelp me out? Thanks a lot!create table a(person_id int,account int,open_date smalldatetime)insert into a values(1,100001,'5/31/2005')insert into a values(1,200001,'5/31/2005')insert into a values(2,100002,'6/02/2005')insert into a values(3,100003,'6/02/2005')insert into a values(4,100004,'4/30/2004')insert into a values(4,200002,'4/30/2004')--my query--Select *[color=blue]>From a[/color]Where open_date between '5/31/2005' and ('5/31/2005'+5)
View 2 Replies View RelatedHave seen other questions here about modifying date pickers supplied by reports created in BIDS. The answer is usually NO. But this does not involve a format change, simply want to limit say to a specific year.
Any ideas?
I have a field which is currently of the "date time" data type. i want to convert it to smalldatetime, but everytime I try, i get an error of the "The conversion from datetime data type to smalldatetime data type resulted in a smalldatetime overflow error. " sort.
I have tried to find the values which are out of the smalldatetime range, with the following query
SELECT *
FROM midmar
WHERE bday BETWEEN '01/01/1900' AND '06/05/2079'
Which doesn't quite work, and gives me values that are actually between those two values listed.
I have also tried having the WHERE clause read:
WHERE bday <'06/06/2079' AND
bday>'01/01/1900'
and that doesn't really work either.
What's going on? Is there likely another problem besides the structuring of my queries?
Hi;
We received a Payment from a customer on '10/10/2007 10:30:00'. i am trying to calculate the commission we would receive from that payment. the commission rate can be edited. so i have to find what the commission rate was when that payment was received.
I have a CommisionAudit table that tracks changes in commission rate with the following values.
ID | Commission Change | UpdatedOn
----------------------------------------------
1 | Change from 20->25 | 03/07/2007 09:00:00
----------------------------------------------
2 | Change from 25->35 | 10/09/2007 17:00:00
----------------------------------------------
3 | Change from 35->20 | 01/10/2007 16:00:00
----------------------------------------------
4 | Change from 20->26 | 11/10/2007 10:00:00
----------------------------------------------
with this payment, as the commission rate had been changed on 01/10/2007 it would obviously be 20%(ID 3). But I need to write sql to cover all eventualities i.e. Before the first and after the last. any help would be most welcome.
I have a query question.
Consider a table with the following structure:
RecordID (PK - int) - RecordDate (DateTime)
I need to find all records that fall within a 7 day period slot based on the first RecordDate of a specific slot.
Example, consider the following records:
RecordID - RecordDate
1 - 2015-04-01 14:00
2 - 2015-04-03 15:00
3 - 2015-04-03 16:05
4 - 2015-04-03 19:23
5 - 2015-04-06 09:15
6 - 2015-04-06 11:30
7 - 2015-04-07 12:00
8 - 2015-04-09 15:15
The result of the query I'd like should look something like this
1
2
5
7
8
So basically I'd like to leave record 3 and 4 out because they fall within 24 hours of record 2 and I'd like to leave record 6 out because it falls within 24 hours of record 5.I'd tried working with a CTE and set a dateadd(d, 1, recorddate), join it on itself and use a between From / To filter on the join but that didn't work. I don't think NTILE will work with this?
UPDATE P
SET
P.IsError=1
,P.IsDrawingRevNo=1
,ErrorMessage=ISNULL(ErrorMessage,'')+'| DrawingRevisionNumber DataType Is Not Valid, smallint expected(-32768 AND 32767)'
FROM ZPTSMGR.ProjectDrawingRaw P
WHERE P.LogId=@LogId AND P.ProjectId=@ProjectId AND P.Revision > 32767 (P.Revision NOT BETWEEN -32768 AND 32767) --SMALLINT RANGE -32768 to 32767.
--DataType Range
--tinyint DataType (MinVal: 0, MaxVal: 255). Its storage size is 1 byte.
--smallint DataType from -2^15 (-32,768) through 2^15 - 1 (32,767) and its storage size is 2 bytes.
--int DataType -2^31(-2,147,483,648) to 2 ^31-1(2,147,483,647). Its storage size is 4 bytes.
--Bigint DataType -- from -2^63 (-9223372036854775808) through 2^63-1 (9223372036854775807). Its storage size is 8 bytes.
The SQl statement fails, and not able to update it. The IsError flag need to set since the value does not lies in given range of smallint.--------say 457896523 which is not a small int value
I have a order table which has a orderdate and despatchdate
i want to write a query in such a way that i want to get all the details from the table for a range specified date as the oderdate and despatchdate are user
interactable. I search the google to solve this problem but could not find a answer
What is the best way to do a where clause that includes a date range. Ex. WHERE date1 BETWEEN @Begin Date AND @EndDate. I want to include all of the @EndDate.
View 6 Replies View RelatedI am working on a report for staff productivity, and have to get a summary figure for how much productivity was expected for a date range. The problem is that the amount expected from an employee can change if they move from full time to part time etc.
So I have a view that has the begin date, end date, expected daily production # by employee, and have to figure out how to get the multiplication to work correctly.
Example:
Employee 1 had a daily production # of 10 from 1/1/07-3/31/07 and daily production of 5 from 4/1/07 - now
If I run the production report for 1/1/07 - 6/30/07 what I want is one summary figure of for the entire range which would be 10*Datediff(d,1/1/07,3/31/07)+5*Datediff(4/1/07,6/30/07) or 890+450=1340.
Of course the actual date range for the report will be a variable, and the dates for the begin and end of a production date range will be all over the place.
Any quick and easy way to do this?
Hey guys..
pls help
what query should I do? Obtaining certain date only using SQL server2000?
Thnx...
Hi All,
I am very new to SQL and have a question, hopefully someone can answer.
I have a table of data, one of the fields is a date.
What i want to do is be able to have a query that can check if the date falls within a certain range - ie fiscal year and output in another column the fiscal year "code".
Ie: dates between 01/06/05 and 31/05/06 is fiscal year 0506
dates between 01/06/06 and 31/05/07 is fiscal year 0607
Could this query be dynamic so if a new fiscal year begins it would know to make the output the next fiscal year code???
Any help is much appreciated.
Cheers
Rudi
Hi, 'am fairly very new to SQL SERVER 2000.
I have this particular problem....I need to develop a stored proc
where in a parameter checks the dates between JAN 1st and DEC 31st of a particular year. The parameter is declared for year..
I'll mention a small example below...
USE PUBS
declare @year as varchar
set @year = 1993
select * from employee
where hire_date >= '@year-01-01'
and hire_date<='@year-12-31'
This is just an example to show wat i want...
the year is prompted to the user...he/she can select any year
I get the following error message....
Server: Msg 241, Level 16, State 1, Line 1
Syntax error converting datetime from character string.
Can anyone help me on this......
Thanks in advance
How to display start date and finish date together in the same column with a '-' in between?
2/24/2008 - 3/1/2008
I have a function that takes in a week number and returns data based on that week number, for one client we have a table that tells what the weeks are since they are not on a normal calendar, but their fiscal calendar. We now have another client that want the same function, but for it to return the data based on the normal calendar week. So, how can I determine the date range of a week, based on the week number?
View 3 Replies View Related
I want to return data from a date range using MDX. The user will pick a month and a number for the number of previous months to display. So far, using SSRS to write my MDX code I have:
SELECT NON EMPTY { [Measures].[Steel Margin], [Measures].[Coil Weight], [Measures].[Amount], [Measures].[Gross Margin], [Measures].[Gross Profit] } ON COLUMNS, NON EMPTY { ([Date Shipped].[Month].[Month].ALLMEMBERS * [Out Rep].[Rep].[Rep].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM ( SELECT ( STRTOSET(@DateShippedFiscalYear, CONSTRAINED) ) ON COLUMNS FROM ( SELECT ( STRTOSET(@DateShippedMonth, CONSTRAINED) ) ON COLUMNS FROM ( SELECT ( STRTOSET(@DateShippedYear, CONSTRAINED) ) ON COLUMNS FROM ( SELECT ( STRTOSET(@OutRepRep, CONSTRAINED) ) ON COLUMNS FROM ( SELECT ( STRTOSET(@DimSalesTypeDescription, CONSTRAINED) ) ON COLUMNS FROM [Heidtman DW]))))) WHERE ( IIF( STRTOSET(@DimSalesTypeDescription, CONSTRAINED).Count = 1, STRTOSET(@DimSalesTypeDescription, CONSTRAINED), [Dim Sales Type].[Description].currentmember ), IIF( STRTOSET(@DateShippedYear, CONSTRAINED).Count = 1, STRTOSET(@DateShippedYear, CONSTRAINED), [Date Shipped].[Year].currentmember ), IIF( STRTOSET(@DateShippedFiscalYear, CONSTRAINED).Count = 1, STRTOSET(@DateShippedFiscalYear, CONSTRAINED), [Date Shipped].[Fiscal Year].currentmember ) ) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
I have two other parameters: StartMonth and RollBackNumber. RollBackNumber will be the number of months and StartMonth will be my computed start parameter. I can write some code if necessary to compute the StartMonth (something like [Date Shipped].[Month].&[2007]&[3]&) if I have to.
Greetings!
I have a data source that gets generated based on a variable with the following SQL :
"select * from result where deletion_ind = 1 and when_deleted >= '" + (dt_str, 50, 1252) @[User::Last_Run_Date] + "'"
But when I run my package I get an error message saying:
The conversion of CHAR to DATETIME resulted in a DATETIME value out of range
The Last_Run_Date variable is set to '2006-06-25 14:35:05.450'
When I run the code in a QA session it works, but in the package it complains! What am I doing wrong?
Thanks for your help in advance.
My requirement is to get the earliest start date after a gap in a date column.My date field will be like this.
Table Name-XXX
StartDate(Column Name)
2014/10/01
2014/11/01
2014/12/01
[code]...
In this scenario i need the latest start date after the gap ie. 2015/09/01 .If there is no gap in the date column i need 2014/10/01
My requirement is to get the latest start date after a gap in a month for each id and if there is no gap for that particular id minimum date for that id should be taken….Given below the scenario
ID StartDate
1 2014-01-01
1 2014-02-01
1 2014-05-01-------After Gap Restarted
1 2014-06-01
1 2014-09-01---------After last gap restarted
1 2014-10-01
1 2014-11-01
2 2014-01-01
2 2014-02-01
2 2014-03-01
2 2014-04-01
2 2014-05-01
2 2014-06-01
2 2014-07-01
For Id 1 the start date after the latest gap is 2014-10-01 and for id=2 there is no gap so i need the minimum date 2014-01-01
My Expected Output
id Startdate
1 2014-10-01
2 2014-01-01