Hello there,
Im not quiet sure this is the right forum, but what the...
I got a database with eg. dates in..
(Day-Month-Year)
01-02-2008
02-02-2008 <-- Today
03-02-2008
Then i want to find the date for yesterday, in this example 01-02-2008, and delete the record..
- How is this done?
Hope you understand and can help me,
Regards Jeppe Richardt
I am trying to get the yesterday's date without the time, eg "1/25/2006 " but I will get "2006-01-25 17:10:21.403" instead. Can somebody tell me the sql for it? currently I am using :
CONVERT(DATETIME, DATEADD(day, -1, GETDATE()), 101))
I need to create a variable expression that will be passing yesterday's date to a sql command but when I create the variable there is only the datetime datatype, how can I trim the time portion from this expression to get the date portion :
DATEADD( "day", - 1 , GETDATE() )
OK, the thread's name is not very self explanatory so here I go:
The fact
I'm working on a simple APP where I store the date of a transaction. I use in my Stored Procedure the getdate() as the default (and untouchable) value for the transaction date
The problem:
These transactions are made all day long and there are transctions made on the morning and afternoon. Now, when I make a report of the transactions for one specific range of days, all the transactions made in the morning of the start date are ignored completely.
Say I have these transactions
TCode TType TDate
45 REQ 03/09/2007 08:20:16 a.m.
46 REQ 03/09/2007 11:59:43 a.m.
47 REQ 03/09/2007 12:01:30 p.m.
48 REQ 03/09/2007 06:01:49 p.m.
and I make this query
SELECT * FROM <Table Name> WHERE TDate BETWEEN <Start Date> AND <End Date>
(where <Start Date> && <End Date> are 03/09/2007 selected from a DateTimePicker control)
I only get these results 47 REQ 03/09/2007 12:01:30 p.m.
48 REQ 03/09/2007 06:01:49 p.m.
if I make a cast as integer I get these results:
TCode TDate TCast
46 2007-09-03 11:59:43.000 39326
47 2007-09-03 12:01:30.000 39327
so my question is
Why are the Morning Transactions from the start date ignored (or interpreted as part of previous day transactions) ?
I have a ssis package, which runs on date parameter. If we dont specify the date it always load data for yesterday's date. And if we give any specific date like '2015-05-10', It should load for that date. How can we achieve this dynamically (using package configuration)? Once we load for any specific date, package should be set for yesterday's date dynamically. How to achieve this as I am new to SSIS.
View 2 Replies View Related My requirement is to get the earliest start date after a gap in a date column.My date field will be like this.
Table Name-XXX
StartDate(Column Name)
2014/10/01
2014/11/01
2014/12/01
[code]...
 In this scenario i need the latest start date after the gap ie. 2015/09/01 .If there is no gap in the date column i need 2014/10/01
My requirement is to get the latest start date after a gap in a month for each id and if there is no gap for that particular id minimum date for that id should be taken….Given below the scenario
ID Â Â Â Â Â StartDate
1 Â Â Â Â Â Â 2014-01-01
1 Â Â Â Â Â Â 2014-02-01
1 Â Â Â Â Â Â 2014-05-01-------After Gap Restarted
1 Â Â Â Â Â Â 2014-06-01
1 Â Â Â Â Â Â 2014-09-01---------After last gap restarted
1 Â Â Â Â Â Â 2014-10-01
1 Â Â Â Â Â Â 2014-11-01
2 Â Â Â Â Â Â 2014-01-01
2 Â Â Â Â Â 2014-02-01
2 Â Â Â Â Â Â 2014-03-01
2 Â Â Â Â Â Â 2014-04-01
2 Â Â Â Â Â Â 2014-05-01
2 Â Â Â Â Â Â 2014-06-01
2 Â Â Â Â Â Â 2014-07-01
For Id 1 the start date after the latest gap is  2014-10-01 and for id=2 there is no gap so i need the minimum date  2014-01-01
My Expected Output
id       Startdate
1 Â Â Â Â Â Â Â 2014-10-01
2 Â Â Â Â Â Â Â 2014-01-01
I've 2 date fields clidlp,clidlc in my data base table. How do I find the newest dates between the fields? Thanks for your help!
View 1 Replies View RelatedI'm using Management Studio Express, is there a way to find out what relationships of a database have cascade delete set to true?
Also is there a way to change the settings (properties) of a relattionship without having to delete it and add it back?
I've been handed a database with over 100 tables and told to find everywhere a cascade delete constraint exists. I could just go through every table by hand and check, but I think there must be an easier way, perhaps an sql query on the master db. Any thoughts?
View 4 Replies View RelatedHi everybody I need help on finding duplicates and deleting the duplicate record depending on name and fname , deleting the duplicates and leaving only the first one.
my PERSON table is this below:
ID name fname ownerid id2
1 a b
2 c c
3 e f
4 a b 1 10
5 c c 2 11
I have this query below that returns records 1 and 4 and 2 and 5 since they have the same name and fname
select * from ( Select name ,fname, count(1) as cnt from PERSON group by
name,Fname ) where cnt > 1
ID name fname ownerid id2
1 a b
4 a b 1 10
2 c c
5 c c 2 11
With this result I need to delete the second record of each group but update the first records with the ownerid and id2 of the second record that would be deleted... I don't know how to proceed with this..
thanks
alex
how to find who delete/Truncate the data from table ,because i don't have any trigger on the table.
View 5 Replies View Relatedi would like to know it's possible to find all transaction(insert, delete,update) on a database for a day. if yes what can i do.
View 2 Replies View RelatedI am trying to specify a SELECT statement to only capture yesterdays data.
The best i can come up with is
SELECT *
from applytracking
where hitDate = (CAST(STR(MONTH(@Date))+'/'+STR(-1)+'/'+STR(YEAR(@Date)) AS DateTime))
But its not right, can anyone set me on the right path?
Thanks for any help
how do i get yesterdays records only?
View 20 Replies View Related
Please can anyone tell me How to calculate the time period from 1st of current month to yesterday?
Thanks
How do i get only the data for the last date in the query. I just want the most current date. Which is yesterdays information. But on monday, its fridays information. So is there a code for getting the most Current Data. If not whats the code for getting the last business day such as friday for today. But for tommorow it will be monday. My time_log field has the date converted into mm-dd-yyyy. Any help?
Code Snippet
ALTER PROCEDURE [dbo].[Testing_Visits_6_Daily]
(@Region_Key int=null)
AS
BEGIN
SELECT dbo.Qry_Visits.Status,
dbo.Qry_Visits.Customer_code,
Qry_Sales_Group.Name,
dbo.Qry_Sales_Group.SR_Name,
dbo.Qry_Date_Dim.Date_Dimension_Fiscal_Week,
dbo.Qry_Date_Dim.Date_Dimension_Date,
dbo.Qry_Date_Dim.Day_Of_Month,
dbo.Qry_Sales_Group.Region,
dbo.Qry_Visits.period_code,
dbo.Qry_Visits.cycle_day, dbo.Qry_Visits.Visits,
dbo.Qry_Visits.time_log, dbo.Qry_Visits.Mailing_Name,
dbo.Qry_Date_Dim.Date_Dimension_Year,
dbo.Qry_Date_Dim.Date_Dimension_Period,
CONVERT(varchar, dbo.Qry_Visits.time_log, 110) AS Date,
dbo.Qry_Sales_Group.Region_Key, dbo.Qry_Visits.[SR Code],
B.VisitsTotal
FROM dbo.Qry_Visits
INNER JOIN dbo.Qry_Sales_Group
ON dbo.Qry_Visits.[SR Code]
COLLATE SQL_Latin1_General_CP1_CI_AS = dbo.Qry_Sales_Group.SalesPerson_Purchaser_Code
AND dbo.Qry_Visits.[SR Code] = dbo.Qry_Sales_Group.SalesPerson_Purchaser_Code
COLLATE Latin1_General_CI_AS
INNER JOIN dbo.Qry_Date_Dim
ON CONVERT(varchar, dbo.Qry_Date_Dim.Date_Dimension_Date, 110) = CONVERT(varchar, dbo.Qry_Visits.time_log, 110)
INNER JOIN ( Select COUNT(Visits)as VisitsTotal,[Sales Responsible],CONVERT(VARCHAR,(Qry_Visits.time_log),110)TheDate,Qry_Visits.Status
FROM dbo.Qry_Visits
WHERE Qry_Visits.Status=2
GROUP by [Sales Responsible] , CONVERT(VARCHAR,(Qry_Visits.time_log),110),Qry_Visits.Status
HAVING SUM(Visits) < 6)B
ON dbo.Qry_Sales_Group.SR_Name COLLATE Latin1_General_CI_AS = B.[Sales Responsible] COLLATE Latin1_General_CI_AS AND
CONVERT(varchar, dbo.Qry_Date_Dim.Date_Dimension_Date, 110) = B.TheDate
WHERE REGION_KEY=@Region_Key and Qry_Visits.Status=2 and CONVERT(varchar, dbo.Qry_Visits.time_log, 110)=GETDATE()
ORDER BY dbo.Qry_Sales_Group.SR_Name, CONVERT(varchar, dbo.Qry_Date_Dim.Date_Dimension_Date, 110)
END
SET NOCOUNT OFF
In search of SQL to obtain "yesterday's" begin/end times for a batch process:
GETDATE() needs to be converted to Yesterdays FIRST and LAST second:
------- --------------------------------
2001-06-25 14:23:56.054 ---> 2001-06-24 00:00:00.001 (1st sec. of yesterday)
2001-06-25 14:23:56.054 ---> 2001-06-24 23:59:59.999 (last sec. of yesterday)
Will CAST and/or CONVERT fucntions assist? The follwoing SQL returns GETDATE()-1 (yesterday along w/ a time) I need the time converted to 1st and last second...
declare @date_time_accessed datetime,
@DateAccessed varchar(80),
@TimeAccessed varchar(80)
select convert(varchar(10),getdate()-1,120) as dateaccessed,
convert(varchar(8),getdate()-1,114) as timeaccessed
I converted an MS Access db to SQL Server 2005 Express yesterday. I used FullConvert Enterprise for the conversion and it worked great. I ran several queries and saved them, and they ran fine. Today, running the same queries, I get this error message:
Msg 208, Level 16, State 1, Line 1
Invalid object name 'tblTXMup'
I googled the message and found someone who had a similar problem and their answer was they were not the dbo. I checked the new database and it was owned by sa so I logged in as sa and got the same error.
Can anyone set me straight so I can get into this db?
Thanks,
Hi,
Can anyone tell me how to get data for yesterday, last month, and last year?
As a example, I wanna know how many loans disbursed for yesterday(not for last 24 hours).
It may be smthing like this. But when I run this one , it gave me a syntax error.
WHERE DATEDIFF(dd,Account.CommencedOnDate,GetDate()) = 1
can anyone help me out pls?
Howto write a query which will find the date from yesterday 12.00am till yesterday 11.59.59PM. that means yesterday 24 hrs only. If I use getdate it will show me the date which is right now which i don't want. everyday i need to search the data from yesterday whole day.
View 13 Replies View RelatedI converted an Access db to SQL Server 2005 Express using FullConvert Enterprise and the conversion went well. I ran a few queries. When I logged in today and run the same exact query (saved it) I get this error:
Msg 208, Level 16, State 1, Line 1
Invalid object name 'tblTXMup'.
I googled the error and someone in another forum said to check ownership, that it would throw that error if another user who was not dbo tried to run a query. I checked and the owner is sa. I logged in as sa and get the same error.
Anyone have an idea what happened?
I'm doing a query using SQL Server. How can I get the max and min date from a database? I can't find any function related to it. Can you help me please ....
Thanks in advance
Andy
I want to match dates from two tables, and I want to match the six latest dates. If I have a match a will delete it from one of the tables.
I will do a while loop and do a delete for every date that already exist. If ,for example, the third date not have a match the loop must do a break.
but if all six is a match they all will be deleted from one table.
how to check it?
max(date)
max(date) - 1
max(date) - 2
...
Some one ho know and understand the question?
Hi
Problem:
one table "tbl_SalesReporting" in this table salesEr every day submit his information.
i need which day salesEr not submit his information. this is check up to current date.
E.G:
salesEr submit information start this date "1/04/2006" to "17/04/2006" and
currentdate: 20/04/2006
i need 18/04/2006,19/04/2006 this date Using SQL queries........
Please help me........
I know I have done this before, but cannot for the life of me remember how.
I am trying to determine return the current (last added) deduction amount for each deduction type for each employee
Sample Table:
employee|Deduction_type|Date_entered|Amount
1|MED|1/1/2007|50
1|DEPC|1/1/2007|100
1|MED|1/8/2007|50
1|DEPC|1/8/2007|100
1|MED|1/15/2007|150
2|MED|1/1/2007|35
2|DEPC|1/1/2007|100
2|MED|1/8/2007|35
2|DEPC|1/8/2007|75
2|MED|1/15/2007|35
Any suggestions?
I have following problem:table includes times for startup and end of operation as datetime fieldrelated to daily shift operations:dateid date starttime endtime458 2006-12-29 22:00 23:15458 2006-12-29 00:15 01:30459 2006-12-30 20:00 21:10459 2006-12-30 22:15 23:35459 2006-12-30 23:30 00:40459 2006-12-30 01:50 02:30records are inserted for a date related to begining of the shift, althoughsome operations are performed also past the midnight (actualy next day, ex:2006-12-31), but belongs to same shift (group)Now I need to build a function that corrects (updates) the date of everyoperation recorded after midnight to a date+1 value, so all records relatedto same groups (458, 459, etc) that starts after midnight has correct date.The procedure has to update already exiting table.Any solution?Grey
View 8 Replies View RelatedAfternoon all,
Just a quickie, is there an expression built into Reporting Services from which you can find the first date and last date of any given month? The first date isn't much of a problem as it isn't quite as dynamic as the last date.
I can do it in an IIf statement but wouldn't be able to make it recognise 29th February in a leap year very easily.
Thanks,
Paul
I'm looking for a way of taking a query which returns a set of date time fields (probable maximum of 20 rows) and looping through each value to see if it exists in a separate table.
E.g.
Query 1
Select ID, Person, ProposedEvent, DayField, TimeField
from MyOptions
where person = 'me'
Table
Select Person, ExistingEvent, DayField, TimeField
from MyTimetable
where person ='me'
Loop through Query 1 and if it finds ANY matching Dayfield AND Timefield in Query/Table 2, return the ProposedEvent (just as a message, the loop could stop there), if no match a message saying all is fine can proceed to process form blah blah.
I'm essentially wanting somebody to select a bunch of events in a form, query 1 then finds all the days and times those events happen and check that none of them exist in the MyTimetable table.
Hi All!I need help with a Statement!I am working with an Access2000 DB.I have the following Problem.ChNrLinieDatum Code 39 Stückzahl BHL1 BHL2 BMRH582-064L2.1008.03.2005 02:30:00FCAA14821701582-064L2.1008.03.2005 02:30:00FCAA14871701582-114L2.1208.03.2005 01:00:00FAC827501240582-114L2.1208.03.2005 01:00:00FAC827441240582-114L2.1208.03.2005 01:00:00FAC827501240582-094L2.707.03.2005 19:45:00FAE74323481582-094L2.707.03.2005 19:45:00FAE74489481582-094L2.707.03.2005 19:45:00FAE74489481581-294L2.807.03.2005 18:20:00FA8V2658221581-294L2.807.03.2005 18:20:00FA8V2652221581-294L2.807.03.2005 18:20:00FA8V2658221582-114L2.1207.03.2005 17:45:00FAAR20721236As you can see I have a few recordsets that are double. The Thing is, thereis an ID that makes them different.I need a Statement that deletes the surplus records where 'Datum' and'Linie' are identical to another record. 1 record has to remain of course.I thought of something like this.DELETE FROM tbAuswertWHERE EXISTS(SELECT *FROM tbAuswertWHERE (Linie AND Datum)IN (SELECT Linie AND Datum AS SuchkritFROM tbAuswertGROUP BY SuchkritHAVING ((Count(Suchkrit)>1)))But I get an error:You wanted to execute a Query that did not have the following expression'Not Linie = 0 And Not Datum = 0' in its AggregatefunctionPerhaps you ccan help me.ThanksJulia--Message posted via http://www.sqlmonster.com
View 3 Replies View RelatedI have to do a report for each hour compare yesterday each hour of sales amount their output is below, how to write a query.
desire output 08:00 am -23:00pm
shop today Time yesterday current Amt Yest Amt diff amount
001 13:00-14:00 13:00-14:00 $10000 $20000 -10000 (down)
002 14:00-15:00 14:00-15:00 $10000 $15000 500 (up)
Time as at HH:MM
Yesterday Total $20000
today Total $35000
I have a database were a client can have many addresses. Clients may be at one address or another at different time of the year. The table allows for entering a startdate and an enddate for each address. I'm trying to figure out the best way to filter on this to return only the current address. I have tried the Where clause below but I'm not sure this is what i should use. The year is not needed but the datatype is datetime. I think i need to use the startdate also, but I cannot seam to get how to filter this. If anyone has ideas I would like to hear them.
Thank you,
A.Selected=1 AND A.EndDate Is Null OR DatePart(m,A.Enddate) >= DatePart(m,GETDATE()) AND DatePart(d,A.Enddate) >= DatePart(d,GETDATE())
Hi Guys,
Can anyone please let me know How to find the first day of the week, if I know the weekno and the year.
For ex: If I know the week no is 22 and Year is 2003 then I should find a way to output the date. which is the first day (monday) of that week
for the above query the date will be eg:26/06/2003
I really appreciate your Help
Thanks:confused: Find the Date if I know the week and year