It has been a while since I have had to write a really advanced query and I was wondering if I could get a little bit of help from someone
find the average monthly earning while you have been an affiliate
affiliate_id, transaction_dt, earnings are the only fields that you have to worry about. I can obviously find the average earnings for a period of a year but, I would like something like
spavgmonthlyearning affiliate_id
any help would be greatly appreciate even a point in the right direction would be fantastic.
I have the following code which works and outputs the desired results, however I am attempting to figure out a way to get this output by week starting from January 5th to July 6th without having to manually change the date for each week and running again. Ideally I would like to be able to save the results to Excel separated by server by week.
Code: SELECT AVG(cast(StatValue as float))as 'CPU Utilization', StatName, ServerName as 'Server Name', from dbo.ServerStats s WHERE s.StatName IN ('MEMPTAGE-TOTAL', 'CPUPEAKP-TOTAL', 'DISKPERC-C', 'DISKPERC-F',
Hi, I have two tables, Weekly and AverageEngTime. Weekly table has 14 columns, "Mon_Day,Mon_Night,Tue_day,....Sun_Night". AverageEngTime table has 15 columns, "Shifts,Mon_Day,Mon_Night,Tue_day,....Sun_Night". I have inserted "Average" as a value for column "Shifts" in AverageEngTime table. Now how do I find the average for each column in Weekly table and insert into AverageEngTime table in the respective columns, and in the row where Shifts = "Average".
I used the following codes to try but i receive errors at where statement.Please correct me. The expected output as below.
declare @Weekday tinyint, @hour int select @Weekday = datepart(dw,getdate()),@hour= datepart(hh,getdate())
if (@Weekday= 1 and (@hour>= 7 AND @hour<19)) begin Insert Into AverageEngTime(Sat_Night) where Shifts = 'Average' SELECT AVG(Sat_Night) FROM Weekly end
if ((@Weekday= 1 and @hour >= 19) OR (@Weekday = 2 and @hour < 7)) begin Insert Into AverageEngTime(Sun_Day) where Shifts = 'Average' SELECT AVG(Sun_Day) FROM Weekly end
I'm trying to find if any part of a date range in my table between orig_start_rent and stop_rent falls within a period I specify in two variables: startPeriod and endPeriod
For example if I specify 2013-11-01 as startPeriod and 2013-11-30 as endPeriod, then if any part of the date range between orig_start_rent and stop_rent(stop-rent can be null if hire is open) falls within that period, I want that to be picked up and assigned the value of 1 in my case statement for OnHire. My code is not picking everything up however - using the example above, a record with orig_start_rent of 2013-05-23 and stop_rent of 2013-11-18 is being assigned 0 when it should be 1. My code here:
declare @startPeriod as smalldatetime declare @endPeriod as smalldatetime set @startPeriod = '2013-11-01' set @endPeriod = '2013-11-30'; select dticket, orig_start_rent, stop_rent, case when orig_start_rent >= @startPeriod and orig_start_rent <= @endPeriod then 1 when orig_start_rent < @endPeriod and stop_rent is null then 1 else 0 end [OnHire] from deltickitem
Calculation of an average using DAX' AVERAGE and AVERAGEX.This is the manual calculation in DW, using SQL.In the tabular project (we're i've noticed that these 4 %'s are in itself strange), in a 1st moment i've noticed that i would have to divide by 100 to get the same values as in the DW, so i've used AVERAGEX:
The results were, respectively: 701,68; 2120,60...; -669,441; and finally **-694,74** for Avg_FMPdollar.i can't understand the difference to SQL calculation, since calculations are similar to the other ones. After that i've tried:
test:=SUM([_FMPdollar])/countrows('Fct Sales') AND the value was EQUAL to SQL: -672,17 test2:=AVERAGE('Fct Sales'[_Frontend Margin Percent ACY]), and here, without dividing by 100 in the end, -696,74...
So, AVERAGE and AVERAGEX have a diferent behaviour from the SUM divided by COUNTROWS, and even more strange, test2 doesn't need the division by 100 to be similar to AVERAGEX result.
I even calculated the number of blanks and number of zeros on each column, could it be a difference on the denominator (so, a division by a diferente number of rows), but they are equal on each row.
I'm using an olap cube in a report (dash board). The last "actual" period should be viewed when the user opens the report. I'm using the MDX tail function for that. Once the report is opened the users want to select another period. Then I want to put period as a parameter. But that is not possible since the parameter check box is no longer available when using a MDX filter expression.
I have a temp_max column and a temp_min column with data for every day for 60 years. I want the average temp for jan of yr1 through yr60, averaged... I.E. the avg temp for Jan of yr1 is 20 and the avg temp for Jan of yr2 is 30, then the overall average is 25. The complexity lies within calculating a daily average by month, THEN a yearly average by month, in one statement. ?confused?
Here's the original query. accept platformId CHAR format a6 prompt 'Enter Platform Id (capital letters in ''): '
SELECT name, country_cd from weather_station where platformId=&&platformId;
SELECT to_char(datetime,'MM') as MO, max(temp_max) as max_T, round(avg((temp_max+temp_min)/2),2) as avg_T, min(temp_min) as min_temTp, count(unique(to_char(datetime, 'yyyy'))) as TOTAL_YEARS FROM daily WHERE platformId=&&platformId and platformId = platformId and platformId = platformId and datetime=datetime and datetime=datetime GROUP BY to_char(datetime,'MM') ORDER BY to_char(datetime,'MM');
Hi,Just wonder if i can get a period of dates to be inserted into a temp table (with a single field [Sales_Date]) base on a Start and End Date using a select query?For Eg,Start = '8/1/2005', End = '8/5/2005'In the temp table,8/1/20058/2/20058/3/20058/4/20058/5/2005 Your help is appreciated. Thks.RgdsRyan
Hello,I have two tables:[Posts] > PostId, ...[Ratings] > RatingId, PostId, RatingI want to select all posts and add a new column named AverageRating.This new column is the average of all ratings associated to that Post.If a post was not rated then its AverageRating would be NULL.How can I do this?Thanks,Miguel
I am getting the number of transactions for two different months based on dates entered from the user. I need to display the number of transactions along with the average sale. I have figured out how to get the dates and sum the transactions but I can't seem to add in the average....
I am at a loss how to calculate the group footer (Result = 30.88 ) which is equal to (96.82 + 26.70 + 0 + 0 ) / 4 . This is the result from the existing Crystal report. I am trying to convert this report to reporting services. Now I cannot nest aggregate functions and also the row number can be dynamic I am confused how to resolve it.
I was hoping someone could help me with pluging moving average into my report.
This is the template I am using for moving average: // /*Returns the average value of a member over a specified time interval.*/ CREATE MEMBER CURRENTCUBE.[MEASURES].[Moving Average] AS Avg ( [<<Target Dimension>>].[<<Target Hierarchy>>].CurrentMember.Lag(<<Periods to Lag>>) : [<<Target Dimension>>].[<<Target Hierarchy>>].CurrentMember, [Measures].[<<Target Measure>>] ) // This calculation returns the average value of a member over the specified time interval. FORMAT_STRING = "Standard";
This is what I have before I started to add the moving average. The report works but only displays the cummulative complexity rank.
What I want to do is also add the moving average for this over the parameter of Iterations. (IterationParam). This is what I have so far with the moving average in my report: I know I must have a lot of errors but I can't get past this first error. I highlighted the line with error. The error said: Query(7, 15) Parser: The syntax for '.' is incorrect. (msmgdsrv)
I am trying to concatenate three fields into one in a View. I have the following data: Last Name First Name Middle Initial (can be null)
I need my resultant field data to look like the following: "Doe, John P."
I'm having a problem writing SQL that is sensitive to placing the period after the middle initial only if there is a middle initial present. If there isn't a middle initial, I just want the following: "Doe, John".
I have tried the following CASE statement:
CASE WHEN middleInitial IS NOT NULL THEN ' ' + middleInitial + '.' ELSE '' END
However, I get an error indicating that the CASE statement is not supported in the Query Designer.
How can I resolve this problem in a View? Is there a function similar to ISNULL(middleInitial, '') that would allow for the "."?
I have a transaction table which has Date as datetime field, amount and account number. i want to find out count of checks that were written in a period of 4 days which exceeded i.e. > $400, between 401 and 500, > 501 for a single month. the table has data for more than a year and i want the results then grouped in monthly format like in OCT between 300 & 400 #30 (30 customers gave checks total worth $300-$400 within any 4 consecutive days period in the month of OCT ) between 400 & 500 # 20 > 501 # 10
NOV between 300 & 400 #30 between 400 & 500 # 20 > 501 # 10
Example table: PeopleID Date Status 1 2004-01-01 True 1 2005-01-01 True 1 2006-01-01 True 2 2004-01-01 True 2 2005-01-01 False 2 2006-01-01 True
I'm trying to find a way to query whether or not someone has had a specific status for 3 years in a row. As you can see from the table above, PeopleID 1 has had a "Status" of "True" for 3 years in a row, whereas PeopleID 2 hasn't--there was one year where they had "False".
I'm wondering I can query this, or if I'm going to have to scan the records manually. :(
I suppose I could write a stored procedure and do some looping too.
I am running SQL Server 2005 Enterp Trial version, which is about to expire in 14 days.. Is this possible to Extend this? Or Un-installing and re-installing may give me back 180 days again? I haven't tried this, but need to know before I do an attempt?
Don't have other machine, don't want to re-built my system..
Alright here's my situation. I have two servers both running Eval copies of SQL Server 2005 Enterprise. This is only because I had the promise that I would be getting a shiney new server with a fully licensed copy of the server soon so I wasn't worried when I setup these two programs to use these. Now they are dragging their feet to approve the server and software so I'm scared. First question - What will happen when the eval period runs out? Second question - Can I tell what the date was when I installed the server?
These both will help me push management to approve atleast the purchase of an SQL license if I can't get the server.
How do you build a query to calculate the time of employement or any space of time for each person in a table? I'm thinking I would want to use a "Current Date" and "Select Datediff" calculations of some sort and reference the hiredate against the current date but I have been unable to find much on this type of query.. Please help..
HiI am hoping someone might be able to help me out with this.I am writing a helpdesk system which records agents logging in and outof the system.I need to write a stored procedure which will show the peak number ofagents logged in concurrently during a specified time period. Withinthe time period, the person viewing the report should be able tospecify intervals at which to see the data.Eg. There is already a table in the system which holds loggedin/logged out data like22/11/2004 14:02 - 22/11/2004 17:3022/11/2004 09:00 - 22/11/2004 17:1222/11/2004 10:25 - 22/11/2004 16:3022/11/2004 11:02 - 22/11/2004 12:3022/11/2004 16:00 - 22/11/2004 17:30The report user can then say for example they want to view databetween 10th November and 12th November broken down into 15 minutesintervals which would produce a table like this:10/11/2004 00:00 - 10/11/2004 00:1510/11/2004 00:15 - 10/11/2004 00:3010/11/2004 00:30 - 10/11/2004 00:4510/11/2004 00:45 - 10/11/2004 01:00 etc etcAgainst each of these time slots, I need to work out the peak numberof concurrent agents logged in using the first table.Can anyone make any suggestions? The time period the report user canchoose are either 15 mins, 30 mins, 45 mins, 1 hour and 1 day.Thanks in advance
Hello to everybody, I'm quite new to the Analysis Services world and would like to create a BI Solution for one of my customers with the following problem: I have sales data from the ERP from different years (2005 and on). My customer wants a report that shows the sales of the current year up to the month he wants to specify (e.g. january - march 2008) compared with the sales of the same period of the previous year (e.g. january - march 2007), divided into product category.
Is there a way to build a cube and then a matrix report in Reporting Services that lets the user specify the period for the current year and shows the same period of the previous year. Do I achieve this behaviour with a calculated member in the cube (e.g. ParallelPeriod)
Any hint (or web like example) would be very appreciated.
Using the TimeSeries algorithm, how do I forecast more than one time period ahead? I read in you book on page 182 that PredictTimeSeries function can take a parameter for the number of time periods you want to predict. Fore example, SELECT PredictTimeSeries(Bread,5) tells the algorithm to predict the next 5 time periods. Can you tell me how to change that parameter using the graphic interfaces?
I have two tables, table a holds all the votes by users of each element in table b. I was wondering, how do I get the average of all those votes in table a that relate to that each instance of a element in table b. For example table b has two elements created by a certain user that has been voted 5 times each by users with scores like 2, 5, 4, 2 , 2 for both of them. I just need to get the average of those numbers that pertain to those elements in table b. Thanks for any help.
Hello all!This might be a newbie question, and there might be something Im just not thinking of right now, but I have a set of values that I need to get the average of but only from the middle 90%. Example:11 <-From here1234456 <- To here.7I thought I could solve it by subqueries and do the following:Select (((Select sum top 5 order asc) + (Select sum top 5 order desc)) - sum total)/rows*0.9 which would give me what I want, but I realised that when aggregating I cant order the subqueries.This is for an application (that will run the query on a sql-server) that only takes one query (although subqueries should be fine), and thats why I have a problem, I cant build any views or things like that.I guess my question is very simple: How can I get a sum of the bottom 5 percent without sorting descending?
