when I start work with my application to load the first report take long time.
after its load good.
my first question is:
Is it possible to load the report server when I start work with my application?
second:
I have a matrix report, is it possible to show all the column, but when I print, to print just the last 4 columns?
thanks alot
and good day
Is there a way to handle an event when the report viewer has completed loading the report? I have handled the report viewer load event but also want to handle an event for when it has completed loading.
I am wanting this because the "report is being generated" message is far off of the screen when I use a large report viewer.
So, on page load I simply make a textbox visible that says "report is being generated". When it completes generating the report, I want it to make that message invisible.
The disposed and unload events don't seem to handle this correctly.
Hi. I'm fairly new to SSRS, and very new to this forum. I have a report based on a stored procedure. I've optimized the procedure so that it runs from 2-4 minutes (previously over half an hour). However, when I run the report that calls the sp, it runs forever (well over 45 minutes in some cases), and the users basically give up on it. Any ideas of why this happens and what steps I can take to improve performance?
Thanks,
Marianne
I have a report which is fairly simple but takes a very long time..
It involves the incidents being counted by categories hence it has several Union All.
Also the report numbers are generetd through 2 tables hence within every Union All tehre is a left or an Inner join.
sample code:
SELECT
1 Sort_Order,
COUNT(*) AS Call_Count,
'Incident Resolved at Level 1' AS Count_Type
FROM HOUAPPS237.CallsAndIncidents.dbo.PROBSUMMARYM1 T1
INNER JOIN HOUAPPS237.CallsAndIncidents.dbo.PROBSUMMARYM2 T2
ON T1.NUMBERPRGN = T2.NUMBERPRGN
WHERE PROBLEM_STATUS = 'closed'
AND T2.THIRD_ASSIGNEE IS NULL
AND T2.THIRD_ASSIGNMENT IS NULL
AND T1.SECONDARY_ASSIGNEE IS NULL
AND HAL_FIRST_RES='t'
AND DATEPART(mm, DATEADD(hour, -@offset, CAST(T1.OPEN_TIME AS DATETIME))) = @MONTH
AND DATEPART(yy, DATEADD(hour, -@offset, CAST(T1.OPEN_TIME AS DATETIME))) = @YEAR
AND T1.OTI_ORIGINATOR IN (SELECT Userid FROM HOUAPPS286.HALServiceDesk.dbo.ServiceCenterAgents)
UNION ALL
-- Calls RESOLVED BY L2
SELECT
2 Sort_Order,
COUNT(*) AS Call_Count,
'Incidents Resolved at Level 2 or 3' AS Count_Type
FROM HOUAPPS237.CallsAndIncidents.dbo.PROBSUMMARYM1 T1
LEFT JOIN HOUAPPS237.CallsAndIncidents.dbo.PROBSUMMARYM2 T2
ON T1.NUMBERPRGN = T2.NUMBERPRGN
WHERE (HAL_FIRST_RES<>'t' OR HAL_FIRST_RES IS NULL)
AND PROBLEM_STATUS = 'closed'
AND DATEPART(mm, DATEADD(hour, -@offset, CAST(T1.OPEN_TIME AS DATETIME))) = @MONTH
AND DATEPART(yy, DATEADD(hour, -@offset, CAST(T1.OPEN_TIME AS DATETIME))) = @YEAR
AND T1.OTI_ORIGINATOR IN (SELECT Userid FROM HOUAPPS286.HALServiceDesk.dbo.ServiceCenterAgents)
UNION ALL
could you suggest what might be the reason why teh report churns for so long.
thanks,
kiran.
Hi,
I'm running SQL Server Agent services and SQL Server Integration services under same DomainUser account and the same DomainUser account is also having sysadmin rights in sql server.
And below is the SQLAgent.OUT file details which I'm getting while running the SSIS from SQL Agent job.
[100] Microsoft SQLServerAgent version 9.00.1399.06 (x86 unicode retail build) : Process ID 4012
[101] SQL Server MachineNameXYZ version 9.00.1399 (0 connection limit)
[102] SQL Server ODBC driver version 9.00.1399
[103] NetLib being used by driver is DBNETLIB.DLL; Local host server is
[310] 4 processor(s) and 3072 MB RAM detected
[339] Local computer is MachineNameXYZ running Windows NT 5.2 (3790) Service Pack 1
[432] There are 11 subsystems in the subsystems cache
[125] Subsystem 'ActiveScripting' could not be loaded (reason: The specified module could not be found)
[125] Subsystem 'CmdExec' could not be loaded (reason: The specified module could not be found)
[125] Subsystem 'Snapshot' could not be loaded (reason: The specified module could not be found)
[125] Subsystem 'LogReader' could not be loaded (reason: The specified module could not be found)
[125] Subsystem 'Distribution' could not be loaded (reason: The specified module could not be found)
[125] Subsystem 'Merge' could not be loaded (reason: The specified module could not be found)
[125] Subsystem 'QueueReader' could not be loaded (reason: The specified module could not be found)
[125] Subsystem 'ANALYSISQUERY' could not be loaded (reason: The specified module could not be found)
[125] Subsystem 'ANALYSISCOMMAND' could not be loaded (reason: The specified module could not be found)
[125] Subsystem 'SSIS' could not be loaded (reason: The specified module could not be found)
[364] The Messenger service has not been started - NetSend notifications will not be sent
[129] SQLSERVERAGENT starting under Windows NT service control
[260] Unable to start mail session (reason: No mail profile defined)
[396] An idle CPU condition has not been defined - OnIdle job schedules will have no effect
[LOG] Step 1 of job 'TestJob' (0x4A197E88EAD5134581A35132A546414C) cannot be run because the SSIS subsystem failed to load. The job has been suspended
[LOG] Unable to read local eventlog (reason: The parameter is incorrect)
[LOG] Unable to read local eventlog (reason: The parameter is incorrect)
[LOG] Step 1 of job 'TestJob' (0xE412C2AB10C7A34B87F5DFC8CFD978CA) cannot be run because the SSIS subsystem failed to load. The job has been suspended
[LOG] Unable to read local eventlog (reason: The parameter is incorrect)
Any help will be appreciated.
Regards,
M.S
Hi,
I'm using SQL Server 7.0. I have a table which has had some records double loaded into it and some triple loaded. I need to delete all instances of a record except for 1. The records are identical with no unique identifier. Here is what I'm talking about.
Currently in the table is:
ID DATE STATUS
1 07/07/2000 D
1 07/07/2000 D
1 07/07/2000 D
2 07/07/2000 A
2 07/07/2000 A
What I need in the table is:
ID DATE STATUS
1 07/07/2000 D
2 07/07/2000 A
Does anyone know how I might be able to do this?
Thanks in advance,
Darrin
have a dts package that does txt -> sql server.
i have 200 txt files with the same exact format.
just want to know if i can write a SP passing a parameter that loads this txt files. because i dont wanna create 200 packages or 200 sources to load 200 txt files.
say:
exec SP_loadTXT txt1
or should i use bulk insert?
any approaches are fine. any suggestions are fine too.
I'm doing some performance reviews and wish to know what tables SQL haspinned in memory and which ones have are loaded through usage ...Is there a way ?Thanks,Craig
View 3 Replies View Related[MS SQL Server 7]We load a table from a text file using Data Transformation Services. Thesource file is already sorted by primary key order.After the DTS load, the default retrieval order on the target table (select* from targettable) appears to be random. I know that theoretically theretrieval order from a SELECT statement isn't guaranteed, but this is thefirst time that I've actually had a default retrieval not follow theprimary key order in the table. I'm thinking that what we're seeing is thephysical storage order of the rows in the table, which have been somewhatscrambled by the way that DTS loads a text file (probably some I/Ooptimization).Is there any way that we can get DTS to load the table in the order thatthe rows appear in the text file (assuming that's what our problem is)?The Project Lead really doesn't like the fact that the default retrievalorder isn't following the primary key.Regards,Lyle H. Gray
View 1 Replies View Related Hi all,
I have created a dts on my Sql server. which gets the data from my log file and insert into my sql 2005 table. In dts i am using 'Flat File Source' and 'SQL Server Destination'. When i execute this through 'SQL Server Business Intelligence Development Studio' it works good.
But when i execute this through my c# code from my web server, it throws me an error 'The specified package could not be loaded from the SQL Server database.'
This exception comes under app.LoadFromSqlServer.
My C# Code :
Application app = new Application();
Package package2 = app.LoadFromSqlServer("\Maintenance Plans\FTPPackage", "Server Name", "UserName", "Password", null);
DTSExecResult result2 = package2.Execute();
string str = result2.ToString();
I hv tried package name like '\Maintenance Plans\FTPPackage' and 'FTPPackage'.
Plz help me to solve this...
Thanks
Harsh
Hi,
I have created a package and when i was trying to configure a flat file destination, i am getting the following error:
===================================
The component could not be added to the Data Flow task.
Could not initialize the component. There is a potential problem in the ProvideComponentProperties method. (Microsoft Visual Studio)
===================================
Error at Extract Test Flat File [DTS.Pipeline]: The module containing "component "" (245)" cannot be located, even though it is registered.
===================================
Exception from HRESULT: 0xC0048021 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ProvideComponentProperties()
at Microsoft.DataTransformationServices.Design.PipelineTaskDesigner.AddNewComponent(String clsid, Boolean throwOnError)
Please advise.
Thanks & Regards,
Deepak
What SSIS components must be loaded onto the server?
To run an SSIS ETL program, exactly what executable, components, programs, etc. must reside on the server that will be running the program. Our developers write an test their ETL programs locally, on their desktops or laptops, but must upload the scripts to the production server for execution. Obviously, they are not going load Visual Studio and SQL 2005, etc. up to the server just to run the scripts (tho SQL 2005 may be on the same box as one of the DB engines used for ETL).
Any info would be appreciated.
I'm trying to start the generic query designer and i get this error.
I have no idea what is wrong, but I know I'm using
Visual Studio 2005 V 8.050727.42
.net Framework 2.050727
SSRS Designers v 9:00.3042.00
Here is the content of my RSReportDesigner.config file if that helps at all.
<Configuration>
<Add Key="SecureConnectionLevel" Value="0" />
<Add Key="InstanceName" Value="Microsoft.ReportingServices.PreviewServer" />
<Add Key="SessionCookies" Value="true" />
<Add Key="SessionTimeoutMinutes" Value="3" />
<Add Key="PolicyLevel" Value="rspreviewpolicy.config" />
<Add Key="CacheDataForPreview" Value="true" />
<Extensions>
<Render>
<Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.XmlDataRenderer.XmlDataReport,Microsoft.ReportingServices.XmlRendering" />
<Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.CsvRenderer.CsvReport,Microsoft.ReportingServices.CsvRendering" />
<Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageReport,Microsoft.ReportingServices.ImageRendering" />
<Extension Name="RGDI" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.RemoteGdiReport,Microsoft.ReportingServices.ImageRendering" Visible="false" />
<Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PdfReport,Microsoft.ReportingServices.ImageRendering" />
<Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false" />
<Extension Name="HTML3.2" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html32RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false" />
<Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering" />
<Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering" />
</Render>
<Data>
<Extension Name="SQL" Type="Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper,Microsoft.ReportingServices.DataExtensions" />
<Extension Name="OLEDB" Type="Microsoft.ReportingServices.DataExtensions.OleDbConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="OLEDB-MD" Type="Microsoft.ReportingServices.DataExtensions.AdoMdConnection,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="ORACLE" Type="Microsoft.ReportingServices.DataExtensions.OracleClientConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="ODBC" Type="Microsoft.ReportingServices.DataExtensions.OdbcConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="XML" Type="Microsoft.ReportingServices.DataExtensions.XmlDPConnection,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="RS" Type="Microsoft.ReportingServices.DataExtensions.RSDPConnection,Microsoft.ReportingServices.DataExtensions"/>
<Extension Name="SAPBW" Type="Microsoft.ReportingServices.DataExtensions.SapBw.SapBwConnection,Microsoft.ReportingServices.DataExtensions.SapBw"/>
<Extension Name="ESSBASE" Type="Microsoft.ReportingServices.DataExtensions.Essbase.EssbaseConnection,Microsoft.ReportingServices.DataExtensions.Essbase"/>
<!-- <Extension Name="SSIS" Type="Microsoft.SqlServer.Dts.DtsClient.DtsConnection,Microsoft.SqlServer.Dts.DtsClient, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"/> -->
<!-- <Extension Name="SAP" Type="Microsoft.Adapter.SAP.SAPConnection,Microsoft.Adapter.SAP.SAPProvider, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/> -->
</Data>
<Designer>
<Extension Name="SQL" Type="Microsoft.ReportingServices.QueryDesigners.VDTQueryDesigner,Microsoft.ReportingServices.QueryDesigners"/>
<Extension Name="OLEDB" Type="Microsoft.ReportingServices.QueryDesigners.VDTQueryDesigner,Microsoft.ReportingServices.QueryDesigners"/>
<Extension Name="OLEDB-MD" Type="Microsoft.ReportingServices.QueryDesigners.ASQueryDesigner,Microsoft.ReportingServices.QueryDesigners"/>
<Extension Name="ORACLE" Type="Microsoft.ReportingServices.QueryDesigners.VDTQueryDesigner,Microsoft.ReportingServices.QueryDesigners"/>
<Extension Name="ODBC" Type="Microsoft.ReportingServices.QueryDesigners.VDTQueryDesigner,Microsoft.ReportingServices.QueryDesigners"/>
<Extension Name="XML" Type="Microsoft.ReportingServices.QueryDesigners.GenericQueryDesigner,Microsoft.ReportingServices.QueryDesigners"/>
<Extension Name="RS" Type="Microsoft.ReportingServices.QueryDesigners.SMQLQueryDesigner,Microsoft.ReportingServices.QueryDesigners"/>
<Extension Name="SAPBW" Type="Microsoft.ReportingServices.QueryDesigners.SapBw.SapBwQueryDesigner,Microsoft.ReportingServices.QueryDesigners.SapBw"/>
<Extension Name="ESSBASE" Type="Microsoft.ReportingServices.QueryDesigners.Essbase.EssbaseQueryDesigner,Microsoft.ReportingServices.QueryDesigners.Essbase"/>
<!-- <Extension Name="SSIS" Type="Microsoft.ReportingServices.QueryDesigners.GenericQueryDesigner,Microsoft.ReportingServices.QueryDesigners"/> -->
<!-- <Extension Name="SAP" Type="Microsoft.ReportingServices.QueryDesigners.GenericQueryDesigner,Microsoft.ReportingServices.QueryDesigners"/> -->
</Designer>
</Extensions>
</Configuration>
Hi,
I am getting message while modifying one table in SSMS like "Table '?' could not be loaded. Column '?' does not exist" . Howevery particular column exist in table and even i am able to modify it with T-SQL.
Any Idea?
Hi there!
I was trying to dynamically load a custom WebControl and display it into my WebFrom.
WebControl is loaded by:
System.Reflection.Assembly assembly = System.Reflection.Assembly.Load("myAssemblyName");
Control module = (Control)Activator.CreateInstance( assembly.GetType("myClassName") );
ModulePlaceHolder.Controls.Add(module);
This is working fine. Assembly is loaded and WebControl is created.
But as my Custom WebControl tries to access SQL Server database, i get a "Must declare the variable '@id'" while executing an ExecuteScalar() from a SqlCommand.
Code in my WebControl was perferctly functioning before converting it from a UserControl (.ascx) to Custom WebControl. Parameter '@id' is correctly declared in my query. If i don't use SqlParameters, everithing works fine...
Any ideas??
Thank you so much!!!
Bye!
Hello, I'm using a multipart/form-data upload to put an image into SQLServer, and it appears to be working, but I'm unable to display theimage. All I'm getting is the text of the URL we're on in Firefox anda missing image icon in IE! Any ideas why this isn't working? Here'sthe image upload code:Dim intImageSize As Int64Dim strImageType As StringDim ImageStream As StreamintImageSize = Picture.PostedFile.ContentLengthstrImageType = Picture.PostedFile.ContentTypeImageStream = Picture.PostedFile.InputStreamDim ImageContent(intImageSize) As ByteDim intStatus As IntegerintStatus = ImageStream.Read(ImageContent, 0, intImageSize)'make connection, write SPs, open connection, etc.TrydbComm.ExecuteNonQuery()Connect.closeCatch SQLexc As SqlExceptionResponse.Write("Insert Failed. Error Details are: " &SQLexc.ToString())End Try--------------And now the display code:'make connection, then SELECT Image, Imagetype FROM Pets WHERE[User]=@user AND Petn=@petn'stored proceduresDim Reader As SqlDataReaderReader = dbComm.ExecuteReader(CommandBehavior.CloseConnecti on)If Reader.read=True ThenResponse.ContentType = Reader(1)Response.BinaryWrite(Reader(0))ElseEnd IfReader.closeConnect.close----------------------------Thanks.
View 1 Replies View RelatedLog shows (on SS2005)
€œA self-generated certificate was successfully loaded for encryption€?
No encryption is used. Properties of Protocol for MSSQLSERVER shows no for Force Encryption, certificates are empty
How, why, where from and what for does it get and load self-generated certificate?
I have to archive the Flat files after they are loaded into an archive folder with a Date time stamp on the folder in the format mmddyyyyhhmmss what task should i use in ssis to complete this and can i do this task for multiple files in the directory, how should i configure such that all files are archived and placed in one directory with a current timestamp, Please Provide me with a solution
View 11 Replies View Related
Hi
I am using a XML source and an oldedb destination to load an XML file into a database, the XML and corresponding XSD are provided by a different system and I dont have any control on them.
In the data flow I can see all the tables in the schema and I can map the columns, however when I run the package it validates fine, and then completes without going into the execution mode, its all green but doesnt load any data. Its weird and I cannot figure out if it is an XML or XSD problem, any idea?
Thanks
Good Morning,
I am trying to find a way of creating my Repoting Services reports of automatically refreshing once our ETL load has completd. I have created a process that creates a file is a particular directory once the data has completed loading however I am unsure how to make the report look for this file and then refresh the report.
Is this something that can be created?
Thanks in advance.
Steve (Novice!)
Hi,
I have create few Mannaged SP which acces some external resources like closing and starting some windows process.. the assembly is assigend unsafe security level
all the processes are started from sqlserver.exe service and are allowed to interact with desktop
these SPs are called frequently
Problem... a very few times sql server is crashed..
does mannaged SP load app domain each time they are called?
what possible reason can be?
I am not exactly clear about the reson .. so I decided to post over here ..
Thanks,
I was just doing a table import task (right click database name/Tasks/Import Data), not knowing my boss had just loaded the same file. it did not warn me that the table currently existed. It just appended the same information to the same table, doubling it. I fixed that one, but, it seems that I might have done this myself in the last couple of weeks, and I'd like to find that table, and there have been a LOT of table loads.
I'm thinking I could get the difference between tables by comparing:
select distinct count(*) from tblname
against
select count(*) from tblname
But how do I incorporate this into some sort of proc that will go through all the tables and let me know where the issue is? I'm swamped and don't have the time to go through each table manually.
I have code that shows me row counts, and have been able to eliminate a few tables from contention, as they are loading monthly data that should only increase minorly month to month, so, no double jumps there.
while working on deployment to production server of an SSIS project, I have noticed that development priject has "disappeared" from my development machine which, obviously, was not my intention, at all. I now get the error prompt saying this:
what am I suppose to do in order to RESTORE it on devel machine like it used to be?
Hi, I am trying to create a maintenance plan on an MSX server and push it out to a TSX server. When I try to run the job on the TSX server it goes into suspended status.
If I look in the SQLAGENT log I see the following error
2008-04-30 15:04:11 - + [125] Subsystem 'SSIS' could not be loaded (reason: This function is not supported on this system)
2008-04-30 15:08:19 - + [125] Subsystem 'SSIS' could not be loaded (reason: This function is not supported on this system)
2008-04-30 15:09:28 - + [125] Subsystem 'SSIS' could not be loaded (reason: This function is not supported on this system)
2008-04-30 15:27:36 - ! [LOG] Step 1 of job 'SystemDatabases.Back Up Database (Full) (Multi-Server)' (0x97394B08F6599040A18D93367FBDB5F7) cannot be run because the SSIS subsystem failed to load. The job has been suspended
2008-04-30 15:35:13 - + [125] Subsystem 'SSIS' could not be loaded (reason: This function is not supported on this system)
2008-04-30 15:50:27 - ! [LOG] Step 1 of job 'SystemDatabases.Back Up Database (Full) (Multi-Server)' (0x97394B08F6599040A18D93367FBDB5F7) cannot be run because the SSIS subsystem failed to load. The job has been suspended
my sql info is
Microsoft SQL Server 2005 - 9.00.3239.00 (X64)
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 2)
any advice would be helpful
I'm attempting to install sql server developers edition on windows server 2003. When I start the install I get a message to upgrade to sp2 or higher after the install is completed.
Then I get the following:
Execution cannot continue as the language dependent resource file c:DOCUME~1MTIDMA~1LOCALS~1Temp1SqlSetupBinResources1033sqlsui.RLL could not be loaded.
Any ideas ? This is a new one on me.
Thanks,
Matt
Hi,
I tried to connect to SQLServer from a java application using jTDS driver jars, with Windows authentication. The following error is thrown,
java.sql.SQLException: I/O Error: SSO Failed: Native SSPI library not loaded. Check the java.library.path system property.
From the above error i realised that the ntlmauth.dll is to be loaded to path. I compiled and run the application as follows,
java -Djava.library.path=<dll_lib_path>
still i get the same error,
any suggestions to overcome this error.
regards,
Shefu
Hi there
After performing a side-by-side instalation of SQL2005, I am not able to open Enterprise manager (for managing SQL2000 instance). It aborts with some errors related to mmc.exe not being able to use a couple of dlls: semsfc.dll and lmmc.dll.
I've tried to unresgister/register them but I get the following error message:
semsfc.dll is loaded, but the dllRegisterServer entry point was not found...
This file can not be registered .
I found a similar complaint in the VB forum, which recomended to use Reagasm but I couldn't understand it really, and I'm not sure if it applies to this SQL server issue.
Thaks for your help
ds9
We are using RS2005 for a year now and never had any problems especially with mail subscriptions.
Since we transferred from single RS machine to web farm everything works ok except mail subscriptions. Subscription sometimes (?!?!?!?!) refuse to export report to a document of any kind. I repeat that this is a random thing which is more often with PDF and less with Web Archive or Excel. We are using shared schedules and on demand execution of AddEvent stored procedure by night batches to send mail to users. Also, original error from RS log says something that this kind of operation is not supported for server working in native mode. We don't have SharePoint so we never used it in any other way then native mode and it worked.
Any idea will be appreciated!
Thanks in advance.
Update 26.06.2007
It seems that problem is not loading dll used to export report to a file but loading email subscription extension (dll that needs to be loaded for execution of email subscription.)
Original error from RS Log:
w3wp!library!1!06/22/2007-11:06:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: The operation is not supported on a report server that runs in native mode., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: The operation is not supported on a report server that runs in native mode.
w3wp!extensionfactory!1!06/22/2007-11:06:43:: e ERROR: Exception caught instantiating Report Server DocumentLibrary report server extension: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.TypeInitializationException: The type initializer for 'Microsoft.ReportingServices.SharePoint.SharePointDeliveryExtension.DocumentLibraryProvider' threw an exception. ---> Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: The operation is not supported on a report server that runs in native mode.
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck)
at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache)
at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at Microsoft.ReportingServices.Diagnostics.ExtensionClassFactory.CreateExtensionObject(Extension extConfig).
In my SSIS package I have flat files as a source, I have to load numbers of flat files into SQL target table. I am using For each loop container for that. I am doing it correctly. My aim is to validate the source data from all angle before writing it into target sql table. I am using below points to validate the source data , if I found any bad data I am redirecting those data to error output.
To Checking
1. To check whether data type of column.
2. To check whether buisinesskey column null.
Is there any thing which I am missing to validate source data.
Screen shot for reference
I am migrating a pocket PC application from VS 2003 to VS 2005 and a few weeks ago I hit the following problem when replicating
A SQL Mobile DLL could not be loaded. Reinstall SQL Mobile. [ DLL Name=sqlceca30.dll]
Scanning forums for help I saw that other people had had this problem and one
http://www.eggheadcafe.com/aspnet_answers/NETFrameworkCompactFramework/Feb2006/post25814466.asp
suggested that this problem could be circumvented by getting the replication object early and then continuously using the same object for subsequent replications.
I did this and it works a lot better now but ever so often I get another error which is
Native Error 28559 SQL Mobile encountered problems when opening the database
My only option at this point is to stop and start the application which cures the problem.
I receive error 25123 on my PPC (audiovox 6600) in a reproducable way (usually) with .net 2.0 application that is using SQL CE that I wrote:
Open the application
Connect to the database
Close the applicaton
Re-Open the application
Connect to the database <-- Error occurs
I will also receive the error if my application isn't the first application launched (or very close to the first to launch).
I don't believe it's a memory issue as according to the memory manager I have plenty of memory:
At boot up only start screen items loaded: 18.46 Used 49.89 Free
Launch Resco File Explorer to click EXE: 19.18 Used 49.18 Free
Launch my application (no DB connection): 23.64 Used 44.71 Free
Connect to the DB and do select count(*) from a table with 0 rows: 26.27 Used 42.08 Free
Close the application (this.Close() on the form: 19.38 Used 48.97 Free
Relaunch App and connect to DB receive error: around 38 Used around 30 free
I was unable to reproduce the issue right now while typing this message, the last sets of numbers are from memory, and include other applications that are currently running.
The only way I have to get SQL CE to load again is to soft reset the PPC. If the application is able to connect to SQL CE at least once it is fine up till I close it and re-open the application. So it either connects and runs great, or it can't connect at all.
Any help in resolving this issue would be greatly appreciated.
Wayne
SQL server 2005 express reporting problem.
error message:
This feature "remote access to report data sources and/or the report server database" is not supported in this edition of reporting service
I got this error message when I try to connect to database hosted in another PC running SQL server 2000.
Is it true that SQlL server Express can only use Local Database Engine to host the database?
Hello,
we've got a SQL Server 2005 which replicates with an SQL Server Compact 3.5. Every 10 to 20 synchronisations we're getting the error mentioned above. A Soft reset of the device helps to make the synchronization working again.
Why is this error happening and how can we resolve this?
BTW, we've also running system that replicates with an SQL Server Compact 3.0 without having this problems.
Thanks,
Markus