Flat Files Without Column Names; How To Map Over 250 Columns
Jan 11, 2007
hi,
i am sure this question must have been anwsered some where, but after a lot of searching i still have not find the anwser.
i have flat files without column headers (267 columns in total).
since i have the file's description i have created a table to house these extracts with the columns in the same order as in the flat files.
additionally, i have an excel containing a list of the column names their data types and length as well as their position on the flat files.
in the old, DTS would map the columns without headers to those columns in the destination table using their order, in which case it works like a breeze for me. but i can not find a way of doing that in SSIS.
i would very much appreciate someone's assistance on this one since i am sure that there must be a better way than manually (and tediously & error prone) to map all those columns.
thanks in advance
View 2 Replies
ADVERTISEMENT
Jun 11, 2007
Sorry if this question had already been answered previously. I was unable search the forum on this topic. How will I merge these and then configure the first row as Column names (As this helps to map to the destination column names automatically)
View 3 Replies
View Related
Jan 4, 2008
I had to use use ssis 2005 in a short project recently & had littletime to work it out. I was importing a whole bunch of flat files intoSQL Server tables with many derived columns and transformations inbetween.It seems to automatically map columns from the flat file to columns inthe sql table where the names of the columns are equal. But can italso do it automatically on position, so flat file column 1 goes tosql table colum 1, etc, etc? In each flat file I had to manually clickand drag the columns across to map them which took a very long time asthere were hundreds of columns in some tables!Thanks.
View 3 Replies
View Related
Mar 13, 2008
Hello guys,
here is my issue.
I created a ssis package which exports the data from oledb source to flat file (csv format). For this i have OLEDB source and Flat File as destination. I generate the file and filename dynamically with the column names in the first row. So if the dynamically generated file name already exists , then i want to append the data in the same existing file. But I dont want to append the column names again. I just want to append the rows to the existing rows.
so lets say first time i generate a file called File1_3132008.csv.
Col1, Col2
1,2
3,4
After some days if my ssis package generates the same file name i.e. File1_3132008.csv, this time i just want to append the rows to the existing file. So the file should look like this-
Col1, Col21,23,45,67,8
But instead my file looks like this if i set Overwrite propery to false
Col1,Col2
1,2
3,4
Col1,Col2
5,6
7,8
Can anyone help me to get the file as shown in the highlighed
Any help would be appreciated .
Thanks
View 3 Replies
View Related
Jun 23, 2015
I want to load flat files into a single table. But the flat files can have variable number of columns upto a maximum of 10 columns. The table in my database has 10 columns in it. So in case if I load a flat file having 6 columns then rest of the columns in the table will have nulls. I don't want to use script task for this as I am not good in writing C#code.
View 5 Replies
View Related
Oct 3, 2007
hi,
on an oledb destination, I want to map one column from a flat file source object to two different columns on the database table.
I only seem to be able to map one to one.
How do I get the pointer to attach to two destination columns?
View 1 Replies
View Related
Jan 7, 2015
I am trying to figure out how to pivot a temporary table. I have a table which starts with a date but the number of columns and columns names will vary but will be type INT (Data, col2,col3,col4………….n)
So it could look like
Date , TS-Sales, Budget , Toms sales
01-Jan-14,100,120,300
02-Jan-14,80,150,300
03-Jan-14,100,20,180
Turned to this
01-jan-14, 02-jan-14, 03-jan-14
100,80,100
120,150,20
300,300,180
Or even just the date and a SUM
What I want is to be able to sum al the columns but without knowing the name and the amount columns to start with this is a manually processes. How could I automate this?
View 2 Replies
View Related
May 6, 2008
Hi,
I have a package that reads a fixed width flat file data into a single CHAR column in an sql server 2005 table.
In the "Columns" tab of the Flat File Connection Manager, I set the RowDelimiter value to {LF} and nothing for the ColumnDelimiter (since I read the entire row from the flat file into a single column in my sql table).
However, in the "Advanced" tab, the ColumnDelimiter Misc property shows {LF}. This was working fine for me.
The problem I was facing was with some files which were recently identified to have rows containing a special character (probably ASCII ZERO) in the middle of the row. So, now if the record was having 400 characters and the 200 th character had this special character, the package was writing the first 200 characters into the sql table and ignoring the rest of the characters.
I am sure that the special character was ASCII ZERO - I wrote a script to read each character in the line and find the ascii code for it.
Has anyone faced this problem ever. If so, pls let me know your solution or any ideas that can help sort this problem. Your help would be much appreciated.
Thanks!!
View 5 Replies
View Related
Apr 29, 2015
I have multiple excel Files  each has one sheet (With same column names) need to be loaded in a single table. I tried For each loop but couldn't succeed. Â
As I am new to SSIS. How to configure For each loop container for this...
View 5 Replies
View Related
Sep 15, 2002
I need to find column names if any after 2 “check” columns.
Scenario: I have a database, with approx 400-1500 tables, depending on installation of software. The software is structured so that, when it synchronizes the SQL database it will create all the columns e.g. custacc, custname etc. and then it will always put in two check columns “CheckOne” and “CheckTwo” these two columns has to be the two last ones. In 99.9 this always works fine, but sometime if the users creates a new field in the software, when it synchronizes the new field “lands” behind the two checkfields, which is not good.
So what I am after is a script, which can run through all user tables, tell me if there are columns after the two checkfields and list those tables if any.
Any help would be greatly appreciated.
Cheers
Henrik.
View 3 Replies
View Related
Feb 26, 2015
I am using CROSS APPLY instead of UNPIVOT to unpivot > one column. I am wondering if I can dynamically replace column names based on different tables? The example code that I have working is based on the "Allergy" table. I have thirty more specialty tables to go. I'll show the working code first, then an example of another table's columns to show differences:
select [uplift specialty], [member po],[practice unit name], [final nomination status]
,[final uplift status], [final rank], [final uplift percentage]
,practiceID=row_number() over (partition by [practice unit name] order by Metricname)
,metricname,Metricvalue, metricpercentilerank
[code]....
Rheumatology Table:The columns that vary start with "GDR" and [GDR Percentile Rank] so I'm just showing those:
GDR (nvarchar(255), null)
GDR Percentile Rank (nvarchar(255), null)
GDR PGS (nvarchar(255), null)
GDR Rank Number (nvarchar(255), null)
PMPM (nvarchar(255), null)
[Code] ....
These are imported from an Excel Workbook so that's why all the columns with spaces for now.
View 9 Replies
View Related
Apr 25, 2015
IN SSIS...
1.---->I have a sales table country wise regions  like (india, usa, srilanka) ....
india usa
srilanka
a b
c
d e
f
So I want output like in
flat file1.txt has india         flat file2.txt has usa        flat file3.txt has srilanka
   a b
c
   d e
f
2.----->I dont know how many regions in my table....dynamically split into separate flat files ....
View 2 Replies
View Related
Jan 22, 2004
Hi
I was wondering if anyone has an idea of how we could find the table names and column names of the tables in our Sql server database at runtime/dynamically given our connection string? Please let me know.
Thanks.
View 5 Replies
View Related
Feb 19, 2008
Background:
I am new to SSIS.
I have a data flow task within a For Each Loop Container.
Its reading a Demilited Flat File and inserting into a DB table.
The Flat File Source reads a specified folder and picks up all files with extension .txt
Question:
How can I record and save the file names the package picks up and loads it in ?
For eg:
If I have under C:Test folder
File1.txt
File2.txt
File3.txt
And the package picks up all the files above and loads them in, is it possible to read the file name its processing ?
I have a need to read these file names ( in this example File1,File2,File3 ) and store them in a DB table.
Appreciate your help.
Thanks in advance.
AkB
View 4 Replies
View Related
Feb 13, 2007
Hi,
I am trying to create a program that transfers tables to flat files.
At this point in time, I have suceeded in created one that creates delimited files.
However, I am now trying to create fixed-width files as you can do with the SSIS designer, but programatically.
Is there a way to programatically determine the width of a column from the source table? I can not seem to find any kind of function or member that stores this information or allows me to retrieve it.
I know what I need to change in order to set a width for a column, but I just don't know how to find the width without just asking the user to provide one.
View 5 Replies
View Related
Dec 27, 2006
Hi,
I have a situation where a tab limited text file is used to populate a sql server table.
The tab limited text file comes from a third party vendor. There are fixed number of columns we need to export to the sql server table. However the third party may add colums in the text file. Whenenver the text file has an added column (which we dont need to import) the build fails since the flat file connection manager does not create the metadata for it again. The problem goes away where I press the button "Reset Columns" since it builds the metadata then. Since we need to build the tables everyday we cannot automate it using SSIS because the metadata does not change automatically. Is there a way out in SSIS?
View 5 Replies
View Related
May 11, 2006
I am transferring data from an OLEDB source to a Flat File Destination and I want the column width for all of the output columns to 30 (max width amongst the columns selected), but that is not refected in the Fixed Width Flat File that got created. The outputcolumnwidth seems to be the same as the inputcolumnwidth. Is there any other setting that I am possibly missing or is this a possible defect?
Any inputs will be appreciated.
M.Shah
View 3 Replies
View Related
Dec 30, 2003
I want to write a DTS that will import a file every day. The problem is that the files is not named the same thing every day. There is a naming convention (SOMMDDYY.TRN) that it will follow. I want to import this file (which is a fixed width file) each day to a table (The table will be empty each day).
After it is imported, I want to look at the NAME of the file, and pull out the date portion of it. So, if the file is called SO122603.TRN, i want to pull out 122603, and then update my table with that date for every record. So when I am done, I will have a table that represents the file I imported, with one added column. This added column would be a Date/Time that has the date that was in the filename. How do I do this???
View 11 Replies
View Related
Mar 19, 2004
I need a querry to get all columns names.
thanks
View 4 Replies
View Related
May 28, 2004
Hey,
I'm creating registration form.
To show fields names I thought to read columns names.
It's ok if columns is named like "Name", "Age" etc.
But if the columns is named [Country, Address, PostCode] then, I think, it can course some problems. Am I right?
First problem I thought about - changing database in the future (Now MS SQL 2k to MySQL etc.)
Is this the only problem?
To solve this I think using table which store syscolumn names as user defined columns names.
My system is speed critical and using this I would get less performance.
Which way should I go?
Case saving columns names in table, how to generate safe column name from user specified name, which can have special charters.
Thanks
View 6 Replies
View Related
Oct 16, 2004
Hi, I need do get a columns names from a table? How to do this in pure SQL? I thought about creating a stored procedure or user function with a result of a string ( col1name,col2name ....) I do not know how to count the number of columns in a specyfied table? Any help would be appreciated. Thanks in advance. magicxxxx
View 2 Replies
View Related
Apr 28, 2008
I need to create the following table in reporting services
PRODUCT April March Feb
2008 2007 2008 2007 2008 2007
chair 8 9 7 4 4 4
table 3 4 5 6 4 6
My problem is the month names are a column in the dataset, but I dont know how to get it to fill as column headers???
Thanks in advance!!!
View 1 Replies
View Related
Dec 5, 2000
I have some Large flat fiiles that I need to export to my SQL Server database. The file sizes range from 16 MB to 116 MB. I've tried to save the files to an excel sread sheet and then export them in that format, but that didn't work. does anyone have any suggestions?
View 1 Replies
View Related
Apr 13, 2007
How can I export data from sql server 2005 table to fixed length flat file without using xp_cmdshell option from sql server stored procedure ?
View 7 Replies
View Related
Feb 7, 2007
hi all
i using SSIS to import flat files and i need support
how can i import flat file from folder inculed many files and when finish start to next and next .....
if can i select from flat files to add condition
like Select * from.....where ......
thanks
View 5 Replies
View Related
Jan 24, 2008
Hello Everyone.
I am a bit new to SQL Server but not to DBA or programming per se. I am having difficulties getting either an Excel or Text flat file to import properly.
I guess it would be best to ask, using either SSIS or BULK INSERT, what options need to be entered for a typical excel flat file?
View 2 Replies
View Related
Oct 18, 2006
In my application I am allowing the users attach files. I found the data type "Image", Will this also allow regular file attachments?
Thanks,
Steve C.
View 4 Replies
View Related
Dec 13, 2013
I'm getting a rule check fail "Long path names to files on SQL Server Installation media failed" when installing SQL 2012 Standard edition from a network share.
View 8 Replies
View Related
Aug 31, 2004
Hi,
I am looking for some help in MS SQL server. I want to access the columns of a table without using the names of the colulmns.
Example - SELECT table1.field[1], table1.field[2] FROM table1;
Any information to this effect is much appreciated.
cheers/- Pradeep
View 9 Replies
View Related
May 8, 2007
I have one column name that is: description
when i write a query the world lights up with blue, I think I saw someone using [ ] around the word but I no longer remember if this is the way to handle reserve words that have been use as columns names
View 10 Replies
View Related
Sep 25, 2005
How can I store flat files in SQL SERVER??
Actually I am planning to prepare a repository of different files like .xls, .pdf, .doc, .ppt etc and then i will have a web interface to access these files. Can anybody guide me, How can i store these flat files in datbase.
View 3 Replies
View Related
Aug 1, 2006
I'm trying to input a few thousand flat files into a few thousand tables in a sql databaseim using integration services with a for each loop to read all the files in a directorythe problem is i can only insert the data from all the files into one tabledoes anyone know a way to do multiple tables? maybe using some sort of variable?
View 1 Replies
View Related
Nov 3, 2006
Hello,
I have a package that contains 22 data flow tasks, one for each flat file that I need to process and import. I decided against making each import a seperate package because I am loading the package in an external application and calling it from there.
Now, everything works beautifully when all my text files are exported from a datasource beyond my control. I have an application that processes a series of files encoded using EBCDIC and I am not always gauranteed that all the flat files will be exported. (There may have not been any data for the day.)
I am looking for suggestions on how to handle files that do not exist. I have tried making a package level error handler (Script task) that checks the error code ("System::ErrorCode") and if it tells me that the file cannot be found, I return Dts.TaskResult = Dts.Results.Sucsess, but that is not working for me, the package still fails. I have also thought about progmatically disabling the tasks that do not have a corresponding flat file, but it seems like over kill.
So I guess my question is this; if the file does not exist, how can I either a) skip the task in the package, or b) quietly handle the error and move on without failing the package?
Thanks!
Lee.
View 9 Replies
View Related
