i have created one package which contains flat file source and flat file destin and corres conneciton mgrs.
i created configuration using package configurations with name config.dtxconfig.(while creating it i selected connection string under source file and destination file).
config.dtxconfig contains path as config value for source c:folderfilesourc.txt.and for destination c:folderfiledest.txt
But my req is we have to create another xml named as folderpath.xml should contain the path up to c:folder.for every package execution ssis should access this xml where it should find the folder.
if i want to change the name of folder (or ) move the folder i should change in folderpath.xml only wihout changing folder name in all configuration files.
can i do that.
if not give me alternate solution.plz guide me with clear explanation since i am novice to this tool
Anyone knows , get a SQL Backup Folder Path in asp.net.Some Systems it displayed like D:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackup and some Systems like E:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackup and etc. i need to get a path for backup programmatically.Please help me.
We have a statutory requirement to keep 5 years of history, so I've checked the option in the Site Settings page in the Report Manager to "Keep an unlimited number of snapshots in report history". The drives are partitioned as follows:
C: -- OS; 20GB
D: -- Apps; 20GB
E: --Data: 160GB
I want to force the report history snapshots onto the data (E:) drive, but I can't figure out what setting will force them there. Can anyone tell me how to set the path to the reports snapshots folder?
Msg 22006, Level 16, State 1, Line 3 xp_subdirs could not access 'ServerBSQL_Backups*.*': FindFirstFile() returned error 67, 'The network name cannot be found.'
How to check if UNC folder exists in Backup? in my code I want to check if the unc folder exists before doing backup, the unc path is retrieved from other table or backup history.
I'm, using my script to many location to create folder to save output files and if the folder is removed/not present it can create it without any noise. But the problem is, while I use the same sort of script to check if a folder is present in the sharedpath it will not create it to copy all bkp files from local to remote path works good, but if you delete the folder or rename the exisitng folder and if the below script tries to create the folder it created as "fILE", very interesting. Per IT team they have given SQL Server account the full rights to create/delete/alter folder/files.
Do I need to use seperate script or way to create / alter folders in the sharepath?
I wrote the below script to print all folders and files located in the share path. How to extend my script to mention by adding another column whether the file is a folder/file , sort of 0 or 1.
DECLARE @File_Exists INT EXEC Master.dbo.xp_fileexist 'serverBSQL_Backupfile.bak', @File_Exists OUT print @File_Exists 1
And if check folder, can use "nul", but it doesn't work for UNC path
DECLARE @File_Exists INT EXEC Master.dbo.xp_fileexist 'serverBSQL_Backupul', @File_Exists OUT print @File_Exists 0
If use xp_subdirs like:
EXEC master.dbo.xp_subdirs 'serverBSQL_Backups'
If the folder doesn't exists, Msg 22006, Level 16, State 1, Line 3 xp_subdirs could not access 'ServerBSQL_Backups*.*': FindFirstFile() returned error 67, 'The network name cannot be found.'
how to check if UNC folder exists in Backup? in my code I want to check if the unc folder exists before doing backup, the unc path is retrieved from other table or backup history.
Can someone tell me why path to the configuration file couldn't be relative to the package? When I try to use relative path (i.e. do not specify full path to the configuration file) package then run from BIDS looks for configuration file in the solution folder instead of package's folder (project folder).
Is there ane way to force package use same folder to search for caonfiguration files?
Is there any way I can configure the Configuration file Path.
I have an understanding that wherever I store my package but my Configuration file(XML) must be store in the place specified in the package. In my dev environment I have C Drive as such the package is in DevServerNameC:SSIS.
However, there is no C drive allocated in Prod envirnment as such package is going to rest in ProdServerName/SSIS
Now if I place my package and execute here and it will look for configuration files(XML) which are on C file path. Then I guess my package fails.
I am just wondering how can I make my package configure file path dynamic?
I have an issue as to where only some reports are visible within Report Viewer url. But if I navigate to the path of the rdl's there are many more present that should be visible through Report Viewer. The client was recently upgraded, and I seem to have all out of box roles and permission levels yet can only see some of those reports, as if some were manually copied to this folder location at a later point and perhaps some user job needs to be run to reflect import those additional rdl's?
We are facing some issues with SSIS and thought if you could be of some help.
Actually, instead of Deploying our SSIS projects we copy the SSIS files to a different server from where we execute the SSIS Packages. The reason being, we have a Core Version of the application and this is deployed to different markets and subsequent customisations are performed in the market specific version of the Packages. The problem is although we have a Package Configuration Xml File for our Connection object, the first time when we copy the Packages, we have to manually open each of the Package and change the URL of the Xml File for Configuration. I read through some of the articles on the internet and came to know that the Package Configuration does not support relative path and only absolute path is possible.
Can you please share some of your suggestions on the above problem.
When I push Add in the configuration dialog, I cannot even get to the first page of the configuration wizard, due to the following error, in several solutions (but not in several others). All have at least one existing configuration (necessarily, to get passwords for connections).
Before I launch into a long description of the issue, I was wondering whether its possible to dynamically amend the file path held in a configuration string? (I'm looking at the Package Configurations Organizer)
Basically recreating the /CONF switch in the dtexec utility
So a parent package could somehow tell a child package to pull its configuration from a selection of different xml config files at run time... I couldn't see a variable in the child package to set from the former
My only idea at the moment is to replace the Execute Package Task with an Execute Process Task, and directly invoke the child using dtexec & an expression to dynamically set the /CONF switch..
Basically i have 3 images capacity per record in my asp.net application. In there i am saving the image path with record id in database and image in my application folder.
Now i am creating SSRS Report in Report builder . In there i have taken one image control to show the images. In the Image properties in report builder i have chosen database under the select the image source field. then inside use this field i have chosen image url and in use this MIME Type i have selected image/jpeg. Now i have saved this report in report server folder.
Now while calling in .net web from through report viewer control. It is opening the report but wont showing the image.
I have been reading through different posts about how to manage SSIS configuration files across multiple environments. I have seen a few that mention a solution that turns out not to really work (or maybe I€™m doing something wrong); which is what I hope to find out here.
Solutions I am working with: 1: Put the XML Configuration file in the same directory as the SSIS package and only specify the config file name when setting it up in the package. I do not specify a path to the XML Configuration file, just the config file name.
ISSUE: This works when I first create the package and test it without closing down visual studio. Even after deploying the SSIS package and the config file and moving it between environments it works as long as the working directory of the DTExec command is the same directory as the SSIS package and configuration files. The problem comes in after I have closed Visual Studio and opened it again and loaded up the SSIS package. It then gives a bunch of errors stating that it can€™t locate the configuration files€¦. If I could fix this issue, then this would be a solution that I could live with. (I would much rather use a relative path to a different directory but I€™ll live with what I can get). Can anyone solve the issue of Visual Studio 2005 not recognizing the location of the configuration files when only the configuration file name, and not the path is specified?
-- The other odd thing is that I have been able to get this to work consistently with some of my packages but not others. I'm not sure what I did to get those packages to recognize the location of the xml config file.
hi my application is applocation1 i kept a file in this folder i want to read it from application how can i get the path of that file in my application.
i want to read the file in my root folder excluding the bin path
I cannot get the log file path read from the configuration.
If the path in the Connection Manager is invalid, package throws an error "SSIS logging provider has failed to open the log" instead of reading it from the config.file. What am I doing wrong?
Here is the portion of the config file. Everthing else is read from the config file correctly.
I dont alot about sql server 2005(Express edition). For debugging purposes i want to copy the whole app_data folder(.mdf & .log files) on the production server to another folder on the same machine(or sometimes to a network folder). So when i copy and try to paste this App_data folder to a new location, i get this error message "cannot copy ASPNETDB: it is being used by another person or program. close any programs that might be using the file and try again." After reading the above message, i close visual web developer, stop the website in IIS and stop the SQLExpress service on the server and try again but still get the same message. So how can i make sure that all the programs accessing these database files are closed such that i'm able able to copy them to a different location.
I know a WMI event watcher can be used to watch for a new file being added to a folder. However, I need to check for new folders being added to an existing folder. I haven't been able to find a post on doing this. Is there a way in WQL to check for a new folder being added instead of a new file? I've used SQL for years, but am new to SSIS.
I have a SharePoint (2007) Document Library site called B. Web Client is enabled on the server and B is mapped as a Drive (let's call it Y for this discussion)
I want to move documents in A to B. Easy enough, right? Not so....
I first started by creating a batch file that issues a COPY \A \Y /Y at the command prompt. Viola! Worked Great!
I then moved that command to a SQL Agent job as a CMDExec statement (exact same statement) and attempted to run it.....CRASH! It found the files in A but then said "The system cannot find the path specified"
Ok, so I tried it in SSIS. CRASH! Checked the error log. Same thing...
So I then checked the account under which the SQl Agent was running (special domain account for all our SQL Servers). Thinking it might mater I changed it to run under my name (I'm in Domain admin). I also ensured I had permissions to the SPS 2007 library as well. (I did).
Ran again! CRASH! Same error....
So, I created a batch file , placed thec ommand in the batch file and ran that from the command prompt! Viola! Worked Great.
So, I was thinking of how ingenious I was as I pasted my C:RootCopy.bat into my SQL Agent job. With a big grin on my face I right clicked and picked "Start Job at step".......CRASH! Same error.
Does anyone have any ideas on this ???????????????
When trying to install Business Contact Manager (BCM) for Outlook 2007, the setup failed and I was refered to a log file in my Local Settings/Temp folder. The log actually says that Business Contact Manager was installed sucessfully! BCM is supposed to install SQL Express 2005 as an instance or as instance if SQL Express is already installed. There is an MSSMLBIZ instance in Services..
Who can I send the Log File to for analysis and the fix feedback?
When I first went into Computer Management and clicked on Services and Applications in the left panel, the error message appeared "Snap-in failed to intialize. Name: SQL Server Configuration Manager CLSID:{CA9F8727-31DF-41D2-975C-887D84903967} This message diappeared when I clicked on Services and Applications again. Under Services, there are 3 SQL services - one is an application that was uninstalled 3-4 weeks ago and I disabled this service. The other 2 are: SQL Server (MSSMLBIZ) and the other one is SQL Server (SQLEXPRESS) When I tried to start either of the last 2, the message appeared: Services "Could not start the SQL Server (MSSMLBIZ) service on Local Computer. Error 3: The system cannot find the path specified. Under Program Files/Microsoft SQL Server/MSSGL.1 folder is mostly empty. So, it seems like the Path in the Registry is not valid and that nothing is being installed in the MSSQL.1 folder. If so, how do I fix this?
How do I get the BCM SQL instance to install and run properly? what do the messages in Services mean and how do I resolve these.
After updating TempDB path to a wrong path (without file name only folder name) the service is not starting. How can i sovle this and start the service
I have a set of folders with the following structure:
MainFolder
1999
SpreadsheetA.xls
SpreadsheetB.xls
SpreadsheetC.xls
2000
SpreadsheetA.xls
SpreadsheetB.xls
SpreadsheetC.xls
etc.
Is there a way that I can use the foreach loop container to loop the sub folders? My plan was to get the folder name and path into a variable, use this to build the connection string for each file in this folder, carry out the upload for that folder, then move onto the next folder and do the same thing, but I cannot see a way to do this.
I am having problem with moving a file from one folder to another folder. Here is the detailed scenario:
I want to move a input.csv file from shared input folder to shared archive folder. i am using the below code to do this. declare @inpath varchar(100) SET @inpath = 'move "\abcdefINPUTinput*.csv" "\abcdefARCHIVEarchive.csv"' EXEC @filestatus = master..xp_cmdshell @inpath but the problem was it was cutting the input.csv file from INPUT folder but not pasting it in the ARCHIVE folder. I really appreciate if anyone can help me to solve this or anyone can tell some workarounds.
I have just finished installing SQL 2005 Ent Edition on Win 2000 Adv Server, SQL2005 SP2, and SP2 Hotfix KB934458. After the installation, I could see and configure all services via SQL Configuration Manager and SQL Server Surface Area Configuration tools. This worked for a couple of days and now both configuration tools no longer detect SQL2005 components. SQL Server Surface Area Configuration issued an error that said "No SQL Server 2005 components were found on specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLAC)". SQL Configuration Manager did not list any installed services. I don€™t know what caused this. Anyone has any idea? Please help! Below is the Installation Report which shows installed components.
===================================
The following components are installed on this server
Hi --I was wondering if this is a bug when I add new data in my table SSIS Confiurations and give wizard a new Configuration filter the package configuration wizard can not see the new values --the old values from the previous configuration are still showing---is there any known workaround or forced refresh I can do
thanks in advance Dave
Background:
SQL Package Configurations are most important because they provide the possibility of a central configuration store for your entire enterprise!!!!!!!! and is in my mind the only way to go
USE [ETLConfiguration] GO /****** Object: Table [dbo].[SSIS Configurations] Script Date: 05/23/2006 13:34:35 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[SSIS Configurations]( [ConfigurationFilter] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL, [ConfiguredValue] [nvarchar](255) COLLATE Latin1_General_CI_AS NULL, [PackagePath] [nvarchar](255) COLLATE Latin1_General_CI_AS NOT NULL, [ConfiguredValueType] [nvarchar](20) COLLATE Latin1_General_CI_AS NOT NULL ) ON [PRIMARY]
It seems to me, that the best way is to have one Environment Varible containing the name of the SQL Server, so that you can look up the configuration in the SSIS Configuration Table when you run the package.
Is this the preferable way of doing it ? I would like to hear some positive/negative comment of why chosing a configuration type instead of another.
It seems to me that putting all of the configuration in the Environment variable is harder work but most secure (server breakdown vs table corruption/database error...)
I am creating a windows application to manage my ssis packages.
My SSIS packages use package configurations, and by default connect to the "SSIS Configurations" table in sql server.
However, I want it to connect to a view instead of this table, so i create a view "vwSSIS_Configurations" and point the package configuration to use the view in sql server.
The application SHOULD be capable of altering the package configuration's configuration and switch its connection between the default "ssis configurations" table, and the view.
Is this possible? I cannot think of a way which I can have my application switch the package configuration's connection.
Sorry if this is not the correct forum... I am using the FOR XML PATH feature of SQL Server 2005 (Amazing!!) Is it possible to return multiple rows? For example:SELECT 'Field1' AS 'Element1/@Field1'FROM TableFOR XML PATH('Repeating') Say the above SELECT returns 5 records, I want it to return 5 rows of xml in my ASP.NET application. So in this case each of the 5 rows would contain:<Repeating><Element Field1="Field1"></Element> <Repeating>Instead of returning 1 row with all the xml together.
When using sp_xml_preparedocument @hdoc OUTPUT, @doc I see code everywhere with huge xml text embedded in some store procedures. Can the SELECT XXX FROM XXX FOR XML PATH('') syntax be used instead to produce the second parameter @doc (xmltext) for sp_xml_preparedocument ?
Im trying to reference a ExcelFilePath connection properties using a UNC path, however it doesnt seem to like it, when i use a mapped drive everything works fine.
Hello to all, help, help,... i have with this problem since 3 weeks, until now i cann't resolve this problem. Maybe can somebody help me. I am hopeless. i have a data table ValidRelationship, i will check if there is a relationship between two members by this table. datas in the table ValidRelationship: IDMember IDOtherMember IDType
3700 3726 10000
3726 3700 10000
3742 3672 10000
3672 3742 10000
3422 3548 10000
3548 3422 10000
3548 3717 10000
3717 3548 10000
3675 3695 10000
3695 3675 10000 I will give two member and check their Relationship with a sql query. but it can be that this two member have no relationship. So i define here that man should search processor <= 6 . To better describe i use a example: max. Result of this query is: 1-2-3-4-5-6. If this is a relationship between 1-7 is 1-2-3-4-5-6-7, but i will give a answer that this is no relationship between 1-7. because processor > 6. But my problem is: this query executing is too slow. if i habe two member no relationship, the time of this complete sql query to execute is more than 1 minutes. Is my algorithm wrong, or where is the problem, why this executing is so slow? How can i quickly get the relationships between two member, if my algorithms is not right? The following Query is only to processor = 3, but it works too slowly, so i don't write remaining processors. declare @IDM int; declare @IDO int; set @IDM = 3418; set @IDO = 4270 select top 1 IDMember from v_ValidRelationships where IDMember = @IDM and @IDO in (select a.IDOtherMember from v_ValidRelationships as a where a.IDMember = @IDM)
select top 1 a.IDMember, b.IDMember from v_ValidRelationships as a, v_ValidRelationships as b where a.IDMember = @IDM and b.IDMember in (select c.IDOtherMember from v_ValidRelationships as c where c.IDMember = @IDM) and @IDO in (select d.IDOtherMember from v_ValidRelationships as d where d.IDMember = b.IDMember )
select top 1 a.IDMember, b.IDMember, e.IDMember from v_ValidRelationships as a, v_ValidRelationships as b, v_ValidRelationships as e where a.IDMember = @IDM and b.IDMember in (select c.IDOtherMember from v_ValidRelationships as c where c.IDMember = @IDM) and e.IDMember in (select f.IDOtherMember from v_ValidRelationships as f where f.IDMember = b.IDMember) and @IDO in (select d.IDOtherMember from v_ValidRelationships as d where d.IDMembe = e.IDMember)
If someone has a idea, please help me. Thank a million Best Regards Shasha
