i want to make a function that will take a table as input parameter. this table will be the output of a stored procedure. while i were writing the function i have an error and when i read about it i found that i can not send a table as input parameter to a function till i create a new TYPE of this table with its columns and data types as UDT but i found that sql server 2005 does not support the type 'table'...
my question now is it possible technically to make this function? is it possible to write something like that :
SELECT dbo.MyFunction(exec dbo.MystoredProc)
and in my function i am using CLR-Integration as this :
create function MyFunction
(
@TempTable table
(
ContractID int,
ContractNumber nvarchar(20),
Name_En nvarchar(80),
Name_Ar nvarchar(80),
ContractAmount money,
CurrencyID nchar(3),
DateStart smalldatetime,
DateEnd smalldatetime,
Currency_En nvarchar(30),
Currency_Ar nvarchar(30)
)
)
returns table( ContractNumber nvarchar(20),
Name_En nvarchar(80),
Name_Ar nvarchar(80),
ContractAmount decimal,
Currency_En nvarchar(30),
Currency_Ar nvarchar(30),
[Year] int,
[Month] int,
DomesticAmount decimal
)
as external name [AssemblyName].[PathOfTheFunctionInTheAssembly].[FunctionNameInAssembly]
please help me in this code as i need it urgently...
thanks in advance,
best regards,
Moustafa
hi all i am using VS 2005 with SQL Server 2005 and i faced a problem that need to be solved urgently... i want to make a function that take a table as input parameter which is the output of a stored procedure (Record set)... first i found that to make w table be as input parameter you must create type of that table first but i found that sql server 2005 doesn't have the 'table' as a type... please any help will be appreciated thanks in advance
I started with an inline table returning function with a hard coded input table name. This works fine, but my boss wants me to generalize the function, to give it in input table parameter. That's where I'm running into problems.
In one forum, someone suggested that an input parameter for a table is possible in 2012, and the example I saw used "sysname" as the parameter type. It didn't like that. I tried "table" for the parameter type. It didn't like that.
The other suggestion was to use dynamic sql, which I assume means I can no longer use an inline function.
This means switching to the multi-line function, which I will if I have to, but those are more tedious.
Any syntax for using the inline function to accomplish this, or am I stuck with multi-line?
A simple example of what I'm trying to do is below:
Create FUNCTION [CSH388102].[fnTest] ( -- Add the parameters for the function here @Source_Tbl sysname ) RETURNS TABLE AS RETURN ( select @Source_Tbl.yr from @Source_Tbl )
Error I get is:
Msg 1087, Level 16, State 1, Procedure fnTest, Line 12 Must declare the table variable "@Source_Tbl".
If I use "table" as the parameter type, it gives me:
Msg 156, Level 15, State 1, Procedure fnTest, Line 4 Incorrect syntax near the keyword 'table'. Msg 137, Level 15, State 2, Procedure fnTest, Line 12 Must declare the scalar variable "@Source_Tbl".
I am trying to use a Execute SQL task in which I call a query and get back a scalar value. I THINK I have it set up correctly, yet I am getting a very unhelpful error message of:
Error: 0xC002F210 at Determine Previous Trade Date, Execute SQL Task: Executing the query "SELECT[Supporting].[dbo].[fGetOffsetTradeDate](?, -1) AS [PreviousTradeDate]" failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
The Parameter Mapping has a single INPUT entry of data type DATE mapped to parameter 0.
The Result Set property (in General) is set to Single Row and there is a single entry in the Result Set config which maps [PreviousTradeDate] to a variable.
Odd thing is, if I replace the ? in the query with a date (say '03/24/2006') everything works fine. This would indicate that my query syntax is fine.
Hi I have this procedure it is creating the proc but when I execute it gives error Msg 137, Level 15, State 1, Line 1 Must declare the scalar variable "@ID". Msg 137, Level 15, State 1, Line 1 Must declare the scalar variable "@nextCode".
SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO
CREATE PROCEDURE [dbo].[GetNextAction]
( @Code char(10), @Track varchar(30)
) AS BEGIN
SET NOCOUNT ON; Declare @ID int; DECLARE @SQL1 VARCHAR(2000) SET @SQL1='Select @ID = Sequence from'+' '+ @Track+ ' where Code=@Code' EXEC(@SQL1); Declare @nextCode varchar; DECLARE @SQL2 VARCHAR(2000) SET @SQL2 ='Select @nextCode= Code from '+' '+ @Track+ ' where sequence =(@ID+1)' EXEC(@SQL2); Declare @NextAction varchar(30); Select @NextAction= nextAction from [dbo].[CaseStage] where Code=@nextCode; Select @NextAction;
I'm trying to write a function that I can run with passing the table name as a parameter. I want to return an integer. The tables wll be differnet types (different colums) but they all have a similar field that i want to get a count of. Someting alng the lines of this:
Create FUNCTION [dbo].[fn_GetItemsToPromote] ( @TableName nvarchar(100) ) RETURNS int AS BEGIN Declare @SQL nvarchar(500) return select count(*) from [@TableName]where promote = 1 END
It doesnt like the @TableName. Can anyone show me how to do this correctly?
I'm writing reports in Rep. Services that reads data from Dynamics NAV (Navision). In NAV data are stored by company and this is implemented by using the company name as prefix to the table name. This means that in a NAV database with three companies (lets call these companies A, B and C) we will have three tables with customers. The table names will be A$Customer, B$Customer and C$Customer.
Now to my problem:
I wan't to write one report where I can choose company. I do not want to use a stored procedure. I want to use a function so I can use the function in select statements and join several functions to build up a report that needs data from several tables.
Is there some way to pass the table name or a part of the table name to a function that returns the content of the actual table? I know I can pass parameters that I can use in the where clause, but is it possible to do it with the table name. Or is there any other way to solve this.
Hi all, I want to use a function with a tabel object as parameter. Doessomeone know a method to do this. I have read that a table as parameteris invalid.
Hi Friends,Is it possible to pass a table as a parameter to a funtion.whos function declaration would look some thing like this....ALTER FUNCTION TempFunction (@TempTable TABLE, @nPId INT)my problem is: i have to access a temporary table created in an SP ina functionALTER PROCEDURE MySPBEGIN....DECLARE @TmpTable TABLE(...)....TempFunction(@TmpTable)....ENDThanksArunDhaJ
I need to be able to pass the output of a function to another function as input, where all functions involved are user-defined in-line table-valued functions. I already posted this on Stack Exchange, so here is a link to the relevant code: [URL] ...
I am fairly certain OUTER APPLY is the core answer here; there's *clearly* some way in which does *not* do what I need, or I would not get the null output you see in the link, but it seems clear that there should be a way to fool it into working.
I have a stored procedure which takes an input parm and is supposed to return an output parameter named NewRetVal. I have tested the proc from Query Analyzer and it works fine, however when I run the ASP code and do a quickwatch I see that the parm is being switched to an input parm instead of the output parm I have it defined as...any ideas why this is happening? The update portion works fine, it is the Delete proc that I am having the problems... ASP Code...<asp:SqlDataSource ID="SqlDS_Form" runat="server" ConnectionString="<%$ ConnectionStrings:PTNConnectionString %>" SelectCommand="PTN_sp_getFormDD" SelectCommandType="StoredProcedure" OldValuesParameterFormatString="original_{0}" UpdateCommand="PTN_sp_Form_Update" UpdateCommandType="StoredProcedure" OnUpdated="SqlDS_Form_Updated" OnUpdating="SqlDS_Form_Updating" DeleteCommand="PTN_sp_Form_Del" DeleteCommandType="StoredProcedure" OnDeleting="SqlDS_Form_Updating" OnDeleted="SqlDS_Form_Deleted"><UpdateParameters><asp:ControlParameter ControlID="GridView1" Name="DescID" PropertyName="SelectedValue" Type="Int32" /><asp:ControlParameter ControlID="GridView1" Name="FormNum" PropertyName="SelectedValue" Type="String" /><asp:Parameter Name="original_FormNum" Type="String" /><asp:Parameter Direction="InputOutput" size="25" Name="RetVal" Type="String" /></UpdateParameters><DeleteParameters><asp:Parameter Name="original_FormNum" Type="String" /><asp:Parameter Direction="InputOutput" Size="1" Name="NewRetVal" Type="Int16" /></DeleteParameters></asp:SqlDataSource>Code Behind:protected void SqlDS_Form_Deleted(object sender, SqlDataSourceStatusEventArgs e){ if (e.Exception == null) { string strRetVal = (String)e.Command.Parameters["@NewRetVal"].Value.ToString(); ............................Stored Procedure:CREATE PROCEDURE [dbo].[PTN_sp_Form_Del] ( @original_FormNum nvarchar(20), @NewRetVal INT OUTPUT ) AS SET NOCOUNT ON SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
DECLARE @stoptrans varchar(5), @AvailFound int, @AssignedFound int
Set @stoptrans = 'NO'
/* ---------------------- Search PART #1 ----------------------------------------------------- */ SET @AvailFound = ( SELECT COUNT(*) FROM dbo.AvailableNumber WHERE dbo.AvailableNumber.FormNum = @original_FormNum ) SET @AssignedFound = ( SELECT COUNT(*) FROM dbo.AssignedNumber WHERE dbo.AssignedNumber.FormNum=@original_FormNum )
IF @AvailFound > 0 OR @AssignedFound > 0 /* It is ok if no rows found on available table, continue on to Assigned table, otherwise stop the deletion.*/ -----This means the delete can't happen........... BEGIN
IF @AssignedFound > 0 AND @AvailFound = 0 BEGIN SET @NewRetVal = 1 END
IF @AssignedFound > 0 AND @AvailFound > 0 BEGIN SET @NewRetVal = 2 END
IF @AssignedFound = 0 AND @AvailFound > 0 BEGIN SET @NewRetVal = 3 END END
ELSE BEGIN DELETE FROM dbo.Form WHERE dbo.Form.FormNum=@original_FormNum
SET @NewRetVal = 0 ---Successful deletion END GO -------------------------------------------------------- When I go into the debug mode and do a quickwatch, the NewRetVal is showing as string input.
Ok, I'm pretty knowledgable about T-SQL, but I've hit something that seems should work, but just doesn't... I'm writing a stored procedure that needs to use the primary key fields of a table that is being passed to me so that I can generate what will most likely be a dynamically generated SQL statement and then execute it. So the first thing I do, is I need to grab the primary key fields of the table. I'd rather not go down to the base system tables since we may (hopefully) upgrade this one SQL 2000 machine to 2005 fairly soon, so I poke around, and find sp_pkeys in the master table. Great. I pass in the table name, and sure enough, it comes back with a record set, 1 row per column. That's exactly what I need. Umm... This is the part where I'm at a loss. The stored procedure outputs the resultset as a resultset (Not as an output param). Now I want to use that list in my stored procedure, thinking that if the base tables change, Microsoft will change the stored procedure accordingly, so even after a version upgrade my stuff SHOULD still work. But... How do I use the resultset from the stored procedure? You can't reference it like a table-valued function, nor can you 'capture' the resultset for use using the syntax like: DECLARE @table table@table=EXEC sp_pkeys MyTable That of course just returns you the RETURN_VALUE instead of the resultset it output. Ugh. Ok, so I finally decide to just bite the bullet, and I grab the code from sp_pkeys and make my own little function called fn_pkeys. Since I might also want to be able to 'force' the primary keys (Maybe the table doesn't really have one, but logically it does), I decide it'll pass back a comma-delimited varchar of columns that make up the primary key. Ok, I test it and it works great. Now, I'm happily going along and building my routine, and realize, hey, I don't really want that in a comma-delimited varchar, I want to use it in one of my queries, and I have this nice little table-valued function I call split, that takes a comma-delimited varchar, and returns a table... So I preceed to try it out... SELECT *FROM Split(fn_pkeys('MyTable'),DEFAULT) Syntax Error. Ugh. Eventually, I even try: SELECT *FROM Split(substring('abc,def',2,6),DEFAULT) Syntax Error. Hmm...What am I doing wrong here, or can't you use a scalar-valued function as a parameter into a table-valued function? SELECT *FROM Split('bc,def',DEFAULT) works just fine. So my questions are: Is there any way to programmatically capture a resultset that is being output from a stored procedure for use in the stored procedure that called it? Is there any way to pass a scalar-valued function as a parameter into a table-valued function? Oh, this works as well as a work around, but I'm more interested in if there is a way without having to workaround: DECLARE @tmp varchar(8000) SET @tmp=(SELECT dbo.fn_pkeys('MyTable')) SELECT * FROM Split(@tmp,DEFAULT)
I need to create a function which takes a multi-value parameter. When I select more than one item, I get the error that I have too many arguments. Does anybody have a solution?
Or can I create a view and then do a "SELECT * FROM viewName WHERE columnName IN (@param)"?
I have a table-valued function in mssql 2005 as below: ALTER FUNCTION fn_test{ @test nvarchar(1000)}RETURNS@TEMP TABLE{ test nvarchar(1000)}ASBEGIN INSERT INTO @TEMP SELECT @test RETURNEND Everytime, I passed in chinese character (@test), such as 測驗, the function will return ????. What should I do for the table-valued function, so that the chinese character can be passed in? Please help. Note: I can search and get the chinese characters if I use stored procedures; and the columns in the tables can store chinese chararcters as well. Only table-valued function is not working with the chinese characters. Is it a bug from MSSQL 2005?
I have an SSRS report with several variables, some of which are multi-valued. The main query that feeds the report uses some table value functions. For example, the query looks something like this:
select tv1.a, tv1.b, tv2.x, tv2.y, tbl.m, tbl.n from tableValueFunction1(@MultiValueParam) as tv1 inner join tableValueFunction2(@MultiValueParam) as tv2 on tv1.xxx = tv2.xxx inner join regularTable as tbl on tv1.xxx = tbl.xxx
where tbl.abc in (@MultiValueParam).When I try to run this, I get an error saying that I'm feeding the wrong number of parameters into the table value functions. I've fed multi-valued parameters to stored procedures before and used a splitter function to split out the comma separated values, so I was planning to do the same thing in this scenario. However, this is different. When I look at the query in SQL Profiler, it shows discrete values for the multi value parameter. For example, the same query above looks like this when viewed through the profiler (using 1,2,3 as my multi-value selection):
select tv1.a, tv1.b, tv2.x, tv3.y, tbl.m, tbl.n from tableValueFunction1(1,2,3) as tv1 inner join tableValueFunction2(1,2,3) as tv2 on tv1.xxx = tv2.xxx inner join regularTable as tbl on tv1.xxx = tbl.xxx where tbl.abc in (1,2,3)
In other words, SSRS isn't converting the multi-value parameter to a comma separated string, like it normally does.
Hi, I need to do the following task, which is described by pseudo-code SELECT * FROM Customers SORT BY @SortExpression How can I do something like it (sorting according to input parameter) Thanks for any idea
Hi everyone, I have a question that I believe should be simple to answer yet I cannot find the answer anywhere. I am trying to make it possible for my report to clear the input box whenever the report is run or when anything in a dropdown list is selected. The reason why I want this is because my report has a dropdown list that inputs date ranges for "quick" report info. The other option is to manually type in the begin and end date. If anyone could help me out with this I would be very grateful.
Hi Help with syntax, I get the error in the line: myDA.Fill(ds, "t1") Function GetProductsOnDepartmentPromotionPaging(ByVal departmentId As String) Dim myConnection As New _ SqlConnection(ConfigurationSettings.AppSettings("ConnectionString")) Dim myDA As New SqlClient.SqlDataAdapter _ ("MM_SP_GetProductsOnDepartmentPromotion", myConnection)
' Add an input parameter and supply a value for it myDA.SelectCommand.Parameters.Add("@DepartmentID", SqlDbType.Int, 4) myDA.SelectCommand.Parameters("@DepartmentID").Value = departmentId Dim ds As New DataSet Dim pageds As New PagedDataSource myDA.Fill(ds, "t1") pageds.DataSource = ds.Tables("t1").DefaultView pageds.AllowPaging = True pageds.PageSize = 4 Dim curpage As Integer If Not IsNothing(Request.QueryString("Page")) Then curpage = Convert.ToInt32(Request.QueryString("Page")) Else curpage = 1 End If pageds.CurrentPageIndex = curpage - 1 lblCurrpage.Text = "Page: " + curpage.ToString() If Not pageds.IsFirstPage Then lnkPrev.NavigateUrl = Request.CurrentExecutionFilePath + _ "?Page=" + CStr(curpage - 1) End If If Not pageds.IsLastPage Then lnkNext.NavigateUrl = Request.CurrentExecutionFilePath + _ "?Page=" + CStr(curpage + 1) End If list.DataSource = pageds list.DataBind() End Function
I have a stored proc that inserts a customer and it expects a timestamp input parameter. I dont know what a timestamp datatype is for sql 2005 and Ive tried to parse all sorts of data types but the proc errors out saying it needs "Byte[]" which Ive tried. Can anyone help me with this? ThanksRyan
i created a cookie as follows HttpCookie myCookie = new HttpCookie("Portal"); myCookie["EMail_ID"] = Email_ID;myCookie["Role"] = Role_ID.Value.ToString();myCookie.Expires = DateTime.Now.AddMinutes(1); Response.Cookies.Add(myCookie);
Now i have to take the"EMail_ID" as input parameter in sqldatasourse.
Hi, I am using a ListBox where a user can choose multiple lines. The index of the selected items are then used in a stored procedure.
I wan´t to use the ID´s in this statement: SELECT * FROM MyTable WHERE MyID IN (1,2,4,9)
But how can I do this? If I pass them as a string, then I can´t use them as above. Can I separate the string '1,2,4,9' so I can use them in the statement above? Or can I send the values as a array to the stored procedure?
This should be relatively easy but for some reason it isn't. I'm trying to simply add parameters to a stored procedure that performs a simple input and I can't do it... I keep getting an error that the parameters are not found when I am explicitly stating them. I could do this with VB ASP.NET 1.x but with all these radical changes with 2.0, I'm pulling my hair out.... I can get to work if I declare a sqlStatement in the code but don't want to go that route (but will if there is no other choice) Any help would be great: Code: Dim cmd As New SqlDataSource cmd.InsertCommandType = SqlDataSourceCommandType.StoredProcedure cmd.InsertParameters.Add("@firstName", txtFirstName.Text) cmd.InsertParameters.Add("@lastName", txtLastName.Text) cmd.InsertParameters.Add("@address1", txtAddress1.Text) cmd.InsertParameters.Add("@address2", txtaddress2.Text) cmd.InsertParameters.Add("@city", txtCity.Text) cmd.InsertParameters.Add("@state", ddlState.SelectedItem.Value) cmd.InsertParameters.Add("@zipCode", txtZipCode.Text) cmd.InsertParameters.Add("@telephone", txtTelephone.Text) cmd.InsertParameters.Add("@email", txtEmail.Text) cmd.InsertParameters.Add("@agegroup", ddlAgeGroup.SelectedItem.Value) cmd.InsertParameters.Add("@birthday", txtBirthday.Text) cmd.InsertParameters.Add("@emailnotification", rbEmail.SelectedItem.Value) cmd.InsertParameters.Add("@magazine", rbEmail.SelectedItem.Value) cmd.InsertParameters.Add("@question", txtquestion.Text) cmd.ConnectionString = "Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|ASPNETDB.MDF;Integrated Security=True;User Instance=True" cmd.InsertCommand = "sp_insertCustomer"
ERROR: Procedure or Function 'sp_insertCustomer' expects parameter '@firstName', which was not supplied. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Procedure or Function 'sp_insertCustomer' expects parameter '@firstName', which was not supplied. Source Error: Line 24: cmd.InsertCommand = "sp_insertCustomer"Line 25: Line 26: cmd.Insert()Line 27: Line 28:
I am designing a report which need to take parameter input by user when the report is open. Can anyone please tell me how to do this? Using MS SQL 2005 report. Thanks.
Is it possible to assign to a column a value passed as a parameter?
When I run the proc I get the following error :
Msg 245, Level 16, State 1, Procedure Transfer, Line 17
Conversion failed when converting the varchar value '@ID' to data type int.
----#################################################### USE [tbldata] GO /****** Object: StoredProcedure [dbo].[Transfer] Script Date: 05/19/2014 11:26:38 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[Transfer](@ID int)
I am passing few parameters to the sql function to do some calculations. If the input parameter is null or blank, then I want to set the input parameter to the value zero
I have created one SSIS package which extract data from database and put that into verious text files like Emp.txt,Add.txt like that. Also I set one globle veriable (CityID) that help in extracting data as citywise. When I ran it through command prompt by passing globle veriable to it like C:setup pcaSSIS PackagesSSIS Package File Extract DataSSIS Package File Extract Data>DTExec /FILE Package.dtsx /SET Package.Variables[CityID].Value;100
it gives me data whose CityID is 100 and format it into text files. but when i want data for another CityID (101) it overwrites my all previous text files where i kept that files.
Now my requirment is that i want to set another globle veriable that take PATH as input parameter and place these files in that path location.(How i set this path in command promt and also in SSIS)
I am trying to send XML as an input parameter for a stored procedure. I have seen many articles that do a good job of describing different variations but all the examples show the stored procedure only pulling one value (field) per record from the XML input. I need to pull 3 fields for each record.
Here is an example of the XML being passed: <object> <property @propID="14" @propType="4" @propValue="Blah blah text" /> <property @propID="217" @propType="2" @propValue="Some other text" /> </object>
I have a table like this in my database: CREATE TABLE SCENE_PROPERTY_LINK (ID INT, OBJ_ID INT, PROPERTY_ID INT, PROPERTY_VALUE NTEXT) and I want a stored procedure that will accept XML and update this table. Here is what I am trying: CREATE PROCEDURE sp_UpdateObject @inValues XML AS BEGIN --create a temporary table DECLARE @props TABLE(PROPID INT, PROPTYPE INT, PROPVALUE NTEXT)
--And then insert the values from the @inValues XML argument into the temporary table --I am sure the SELECT statement is VERY wrong
INSERT INTO @props(PROPID, PROPTYPE, PROPVALUE) SELECT @inValues('@propID', INT), @inValues('@propType', INT), @inValues('@propValue', NTEXT) FROM @inValues.nodes('/object/property')
--...and then I will use the temp table to update the DB table (SCENE_PROPERTY_LINK) for each record where SCENE_PROPERTY_LINK.PROPERTY_ID = @props.PROPID AND @props.PROPTYPE != 6
END
I am sure it would be more efficient to update the DB table directly from the XML argument, without using the temporary table. But, I will settle for this solution using the temp table. I have done some work creating XML output from several stored procedures but, this is the first time I have been faced with consuming XML input in SQL.
I apologize for the long post. Thanks in advance for any help you can provide.
Is there a way to force the parameter input area to always show even when default values are specified? I want to always display the parameter area even when I set initial parameters.
