hi, I'm using sql server 2005 standard, and I want to be able to move my local database to another server, but I can't figure out how to script the database and the data so that I can just run one script to move the whole database. this can be done right? I can't imagine that such an obiviously necessary tool would be intentionally left out, so I'm figuring that I'm just a doofus and don't know where the option is...
Hi all.I have an keyword table by 2000000 rows that is an int(4) key and avarchar(50)Keyword(Unique index) in Sql Server 2000.After about 80 seconds of starting full population, speed of addingnew items t in Enterprise manager/Fulltext ctalog, decreases to (1/4)and more less.please help me!Thanks
hi i am trying to gernerate some tables ( first with a script and then with a stored procedure),, in ms server management studio exrress 2005 using the followingcreate table ip( id int IDENTITY NOT NULL, ip varchar(15) NOT NULL, hostname varchar(128) NOT NULL, primary key(id)) ; i store this in a new query (assume :right click associates the query to the current database ?) and run it and nothing happens its been a while since i did sql but i think the sql is ok....how or more specifically where is the appropriate place to run this code thankssimo stored as a new query
I would like to find a utility that can scan through an existing SqlServer 2000 database and create scripts to re-insert/re-populate thedata into another DB with the same table structures. Like a back-uputility.Can anyone recommend one (or tell me which ones to avoid)? Iwould like one that takes dependencies between tables intoconsideration.Thanks
I have a large table that I need to copy, but I need to generate a new value for my id field using a SPROC and replace my existing ID value. I also have a few mapping tables I need to copy, so I need to store this new ID for later use. I currently have a SPROC that performs all these actions, but it takes about 3 or 4 minutes to complete and completely hogs the CPU time. Thus, I can't perform any actions until it finishes.
I'm looking for a way to run this procedure in the background. Unfortunately, my ID field value is not a GUID nor an IDENTITY column. I've researched Integration Services, but I was unable to find any DataFlow Tranformations to call a SPROC to retreive a new id nor could I find anything that would let me store my new id to update my mapping tables. SQLBulkCopy wasn't a good solution either.
If anyone has any insight to this, it would be greatly appreciated. Thanks,
Hi, I have a little question. I searched google, and could not find good answer for this one. I have a stored procedure that returns two tables. Usually I generate a dataset out of a stored procedure by dragging it to the dataset. When I drag this one it creates a DS with only one table, the first one. How can I make it use both tables?
I'm trying to generate scripts in SQL Server Management Studio 2005.
When I choose 'Script all objects' I get an error when I try to execute it. When I generate the scripts in single files, only tables in one file, only views in one file etc. etc., the execution is succeded.
1) Why do I get an error when I try to execute the script containing tables, views, procedures in one file....?
2) I get an error in the view-file where one column is 'invalid' but I can see it in the view. A generated script should execute succesfully when it is generated one second ago on the same database and so on... Right?
Other than right-clicking on each individual table in SSMS and generating a CREATE script, is there a simple way to generate CREATE TABLE scripts for tables within a given database?
Background: I have a bunch of tables in one database, and I would like to add tables to a second database that have the same names and basic structures of some of the tables from the first database.
I do not need to transfer any data from the tables, this is a seperate project that will use a similar data structure. I just want to generate the CREATE TABLE scripts for 30ish tables within the first database, and then I'll tweak the scripts as appropriate and run them against the new database.
I use SQL Server 2005 Dev Edition and am not new to making databases (then again, I've had enough experience and my dad does the same thing).
I am (unfortunately) a university student and for my dissertation I am going to produce a SQL Server database with a strong emphasis on data mining.
Obviously, for the data mining to be useful at all I need to produce loads and loads of test data.
Fair enough, and there are applications which do this, such as EMS Data Gen, but can anyone recommend me any other data gen utilities? EMS Data Gen has poor handling of unique attributes, and as I am doing a car manufacturer this will give me problems when I come to the registration number attribute.
Also, why are utilities for SQL Server (and Oracle at that) so expensive? This makes it out of my reach and makes it difficult to build a truly good database that will net me good marks, and demotivates me. :(
Lastly, please feel free to recommend to me any utilities for SQL Server - such as performance monitors, backup utilities. Anything. But if they are priced utilities, they have to be sensibly priced (<£100), because I cannot yet afford to pay >£1k on such utiltiies.
Sorry about the huge post, but I think this is the amount ofinformation necessary for someone to help me with a good answer.I'm writing a statistical analysis program in ASP.net and MSSQL7 thatanalyzes data that I've collected from my business's webpage and thehits it's collecting from the various pay-per-click (PPC) engines.I've arrived at problems writing a SQL call to generate certainstatistics.Whenever someone enters our site from one of the PPC search engines, Iwrite out a row to the Hits table. In that table are the followingcolumns:HitID - the Unique ID assigned to each hit that comes into the siteKeyword - the keyword the user searched on when he or she came to thesiteSearchEngine - the PPC engine the user came fromSource - this is pretty much always 'PPC'...if we were to do otherthings, like a newsletter, then this would be different.TimeArrived - the date and time the user arrived at the website. Ihave no idea why I didn't call it "datearrived," since I use "date"and not "time" pretty much everywhere else...(I don't think the rest are important, but they might be, so I'llinclude them for completeness's sake)Referring URL - the URL the user came fromReferring Website - the string between the 'http://' and the first '/'in the URL. I know it's redundant information, but when I designedthis part, I didn't know how to parse it out afterwards, so I justfigured I'd duplicate it.Page Visited - the page the user first arrived atWhen a person comes to the site, I also write out a session cookiecontaining the user's hitID. If the person fills out an enrollmentform (a process which we refer to as "responding"), I attach thatsession ID to the form. The response form (and thus the responsestable) is long; these are the important fields:id - a unique ID for each responsedate - the date and time of the responsestatus - a varchar field containing a status code. I would have madeit a number, but I wanted it to be viewable from looking at the rawdatabase.hitid - the HitID of the user, taken from the session cookie. If thereis no session cookie (for whatever reason), the HidID is written outas 0. While it wouldn't occur often, I can't guarantee that there willnever be more than one response record attached to a singular hitid.Later, some of the responses turn into "confirmations", which meansthat they've actually ordered from us, not just filled out the form.This usually happens about three or four days after the initialresponse. When this happens, the status of the response is changed toa phrase containing the word "confirm" in it (there are a few of them,but they all contain that word).So now that we've collected all this marketing intel., I need toanalyze it.I've written a parser that takes reports from various pay-per-clickcompanies and puts them into a table called PPC. Information in thiscolumn is written out as one record per search engine per keyword perday. The schema is as follows:id - a unique ID for the record in the tabledate - the date to which the information in the record appliessearchengine - the PPC engine to which the information applieskeyword - the keyword to which the information appliesclicks - the number of clicks on the applicable keyword on theapplicable search engine on the applicable day.impressions - same as clicks, but for impressionscpc - the cost per click on the applicable keyword ...avgpos - (I don't always have a value for this field) The averageposition that the keyword was shown in for the applicable keyword ...With this data in, the last step is actually analyzing the threetables for useful statistics on the various keywords, search engines,and time frames. That's the step I've been trying to complete.So what I need is a SQL call that I can run that generates a tablewith the following information:SearchEngineKeywordCost / Click - When calculating the CPC, I can't just take an averageof all the records. I need to calculate the total amount spent per day(clicks * cpc), add that up for every day, and then divide that by thenumber of total clicks. Just doing an average doesn't take intoaccount the fact that some days we'll get more clicks than others.Total Spent - # Clicks * CPC#Responses - counting the number of records in the responses table#Confirms - counting the number of records in the responses table with"confirm" in their statusTotal Spent / #ResponsesTotal Spent / #ConfirmsOh yeah, and I want to be able to order by any four of the fields inany order, narrow my selection to only those keywords that either areor contain a user-specified string, further narrow my selection toonly those records that fit other user-specified criteria for any ofthe columns in the table I'm generating, and select only the top xrecords (where x is a user-specified number). I already haveuser-controls that output the SQL for all of these things, but I needto have places in which I may put that SQL in my call.After many trials and tribulations, I've come up with the followingSQL call. Right now, its output for nearly every row is incorrect, Ithink in a large part due to the fact that the method that I'm usingto generate the number of clicks is yielding incorrect values.If you'd like to help me and you think that modifying the followingcall is easier than writing a whole new one, be my guest; if you'dprefer to write a new one, I'm game for that, too. I'm just concernedwith its working right now, and any help you can give me is greatlyappreciated.Anyway, here's the call:/*sp_dboption @dbname='NDP', @optname='Select Into', @optvalue=true;*//*Running the above might be necessary to get the "Select Into"s towork*/Drop table ResponsesPPCDrop table ConfirmPPCDrop table TempPPCSELECT Responses.[ID] as [ID], Responses.Status, PPC.SearchEngine,PPC.KeywordInto ResponsesPPCFROM Responses, PPCWHERE Responses.HitID IN(SELECT Hits.HitIDFROM HitsWHERE Hits.SearchEngine = PPC.SearchEngineAND Hits.Keyword = PPC.Keyword)SELECT ID, Status, SearchEngine, KeywordInto ConfirmPPCFROM ResponsesPPCWHERE Status LIKE "%confirm%"Order by SearchEngine, KeywordSELECT PPC.SearchEngine, PPC.Keyword,SUM(PPC.Clicks), /*I noticed that thiscolumn gives me incorrect values(I don't need it in my final report, but it's useful for debugging).For some keywords, it gives me huge numbers(e.g. 265 clicks on one word that got ~10 clicks /day over five days),and for others, it doesn't give me enough. I think this is a majorpartof what's throwing off the rest of the statistics*/Case SUM(PPC.Clicks) WHEN 0 THEN 0 ELSESUM(PPC.clicks * PPC.cpc) / SUM(PPC.Clicks) END as CPC,SUM(PPC.clicks * PPC.cpc) AS TotalCost,count(ResponsesPPC.ID) As NumResponses,Count(ConfirmPPC.ID) As Confirms,(Case Count(ResponsesPPC.ID) WHEN 0 THEN 0 ELSESUM(PPC.clicks * PPC.cpc) / count(ResponsesPPC.ID) END) ASCostPerResponse,(Case Count(ConfirmPPC.ID) WHEN 0 THEN 0 ELSESUM(PPC.clicks * PPC.cpc) / count(ConfirmPPC.ID) END) AsCostPerConfirmFROM (PPC LEFT JOIN ResponsesPPC ON PPC.SearchEngine =ResponsesPPC.SearchEngineAND PPC.Keyword = ResponsesPPC.Keyword)LEFT JOIN ConfirmPPC ON PPC.SearchEngine = ConfirmPPC.SearchEngineAND PPC.Keyword = ConfirmPPC.KeywordGROUP BY PPC.SearchEngine, PPC.KeywordOrder by PPC.keyword desc/*Drop table ResponsesPPCDrop table ConfirmPPCDrop table TempPPC*//*I don't drop them right now so I can look at them,but normally, one would drop those tables.*/Thanks a lot for your help,-Starwiz
I have been generating report models for users to use with Report Builder and there is no data when they select the model. I noticed that the tables I chose did not have a primary key and when I chose a different table, with a primary key, and generated a model from it, then there was data for the user to use in Report Builder.
Is there a documented work around or will I need to set a primary key on each table?
I am attempting to explain my probelm again. Please read it:
I have 3 tables. CallDetail, Call and Request. The tables are populated in the following order: One row for CallDetail, One for Call and one for Request and so on.
I have to generate a UniqueNo - Per empid, Per StateNo, Per CityNo, Per CallType. The no will remain same for the same CallDetailID and ordered by the date created. However if the CallDetailId changes, the no. will increment based on the empid, Per StateNo, Per CityNo, Per CallType
For eg:
For Eg: ( Assume Call Detail id is changing for all the days) Monday - 3 calls made for empid 1, state SA023, city 12 and call type 1 will generate a unique id 1 for all 3 calls Tuesday - 2 calls made for empid 1, state SA023, city 12 and call type 1 will generate a unique id 2 for both calls Wednesday - 3 calls made for emp id 1, state SA023, city 12 and call type 2 will generate a unique id 1 for 3 calls as the call type is different than the previous day for same employee Thursday - 2 calls made for empid 2, state SA023, city 13 and call type 1 will generate unique id 1 for both the calls as combi of city and call type are different.
So the unique id has to be generated considering empid, state, city and call type, ordered by the EntryDt. EntryDt is needed because : 3 calls made for empid 1, state SA023, city 12 and call type 1 at 10/11/2007 10.00 AM will generate a unique id 1 for all 3 calls 2 calls made for empid 1, state SA023, city 12 and call type 1 at 10/11/2007 12.00 AM will generate a unique id 2 as the call was registered later.
Here is what I wrote with the help of a mod over here:
INSERT @Request SELECT '324234', 'Jack', 'SA023', 12, 111, Null UNION ALL SELECT '223452', 'Tom', 'SA023', 12, 112, Null UNION ALL SELECT '456456', 'Bobby', 'SA023', 12, 114, Null UNION ALL SELECT '22322362', 'Guck', 'SA023', 12, 123, Null UNION ALL SELECT '22654392', 'Luck', 'SA023', 12, 134, Null UNION ALL SELECT '225652', 'Jim', 'SA023', 12, 143, Null UNION ALL SELECT '126756', 'Jasm', 'SA023', 12, 145, Null UNION ALL SELECT '786234', 'Chuck', 'SA023', 12, 154, Null UNION ALL SELECT '66234', 'Mutuk', 'SA023', 12, 185, Null UNION ALL SELECT '2232362', 'Buck', 'SA023', 12, 195, Null
DECLARE @Call TABLE(CallID INT, CallType INT, CallDetailID INT) INSERT @Call SELECT 111, 1, 12123 UNION ALL SELECT 112, 1, 12123 UNION ALL SELECT 114, 1, 12123 UNION ALL SELECT 123, 2, 12123 UNION ALL SELECT 134, 2, 12123 UNION ALL SELECT 143, 1, 6532 UNION ALL SELECT 145, 1, 6532 UNION ALL SELECT 154, 1, 6532 UNION ALL SELECT 185, 2, 6532 UNION ALL SELECT 195, 3, 6532
-- Query written with help of a helpful person here UPDATE r SET r.UniqueNo = dt.CallGroup FROM @Request r JOIN @Call c ON r.CallID = c.CallID JOIN (SELECT CallDetailID, EntryDt,EmpID, CallGroup = ROW_NUMBER() OVER (ORDER BY EntryDt ) FROM @CallDetail ) dt ON c.CallDetailID = dt.CallDetailID select * from @Request
as the call for Buck is of calltype 3 which was not done earlier. So the no starts from 1.
Also how to add the paritioning by empid, StateNo, Per CityNo, Per CallType and yet maintain the same unique no for the same calldetailid. Eg: CallGroup = ROW_NUMBER() OVER (PARTITION BY empid, state, city, calltype ORDER BY EntryDt )
Can a stored procedure in SQL Server 2005 generate XML data based on the schema, We don't prefer to manually build an xml string inside the stored proc?
Is there any SQL Server 2005 feature to do it if possible?
The tables are populated in the following order: One row for CallDetail, One for Call and one for Request and so on
I have to generate a UniqueNo - Per empid, Per StateNo, Per CityNo, Per CallType and insert into #Request table along with the other data. How do I do this?
SAMPLE DATA
Code Block Insert into #CallDetail(12123,1) Insert into #CallDetail(53423,1) Insert into #CallDetail(6532,1) Insert into #CallDetail(62323,1) Insert into #CallDetail(124235,1) Insert into #CallDetail(65423,2) Insert into #CallDetail(56234,2) Insert into #CallDetail(2364,2) Insert into #CallDetail(34364,2) Insert into #CallDetail(85434,2)
Insert Into #Call(111,1,12123) Insert Into #Call(112,1,53423) Insert Into #Call(114,1,6532) Insert Into #Call(123,2,62323) Insert Into #Call(134,1,124235) Insert Into #Call(143,2,65423) Insert Into #Call(145,1,56234) Insert Into #Call(154,2,2364) Insert Into #Call(185,1,34364) Insert Into #Call(195,1,85434)
Insert Into #request Values('324234','Jack','SA023',12,111,0); Insert Into #request Values('223452','Tom','SA023',12,112,0); Insert Into #request Values('456456','Bobby','SA024',12,114,0); Insert Into #request Values('22322362','Guck','SA024',44,123,0); Insert Into #request Values('22654392','Luck','SA023',12,134,0); Insert Into #request Values('225652','Jim','SA055',67,143,0); Insert Into #request Values('126756','Jasm','SA055',67,145,0); Insert Into #request Values('786234','Chuck','SA055',67,154,0); Insert Into #request Values('66234','Mutuk','SA059',72,185,0); Insert Into #request Values('2232362','Buck','SA055',67,195,0);
EXPECTED OUTPUT will be (See the last column for unique nos). :
Code Block Insert Into #request Values('324234','Jack','SA023',12,111,1); Insert Into #request Values('223452','Tom','SA023',12,112,2); Insert Into #request Values('456456','Bobby','SA024',12,143,1); // Calltype = 1 empid= 1, but state is different, hence unique id is 1 Insert Into #request Values('22322362','Guck','SA024',44,114,1); Insert Into #request Values('22654392','Luck','SA023',12,123,3); Insert Into #request Values('225652','Jim','SA055',67,143,1); Insert Into #request Values('126756','Jasm','SA023',69,134,1); Insert Into #request Values('786234','Chuck','SA023',72,145,2); Insert Into #request Values('66234','Mutuk','SA059',72,185,1); Insert Into #request Values('2232362','Buck','SA055',67,195,2);
Please note that this will not be run as a batch query, but the no. has to be generated and inserted into #record table in realtime. I have given bulk of records for understanding of the problem
Hi: I have SQL Server 2005 Express edition and I am trying to generate a script that someone can take and import into the full version of SQL Server. Using the Generate Scripts Option, I have been able to generate scripts for the various SQL statements that I created - but cannot get it so that the data is included. I'm new to this and would appreciate any help. I have a populated database that I would also like to transfer to the new server.Any help greatly appreciated.Roger Swetnam
Is it possible to write a SP (Automate) to generate STATISTICS on any database and then use the output to create the stats on that database.
I ran the tuning adviser and it suggested indexes with lot of STATISTICS on the dev environment. This dev environment is replicated in several other environment with data size in these environment varying. I would  like to know if I can create a SP which generates STATISTICS information pertaining to specific database environment for the query in question for tuning.Â
When I attempt to generate a datasource model I get the following error messages: ------------------------------------------------ More than one item in the Entity 'Customer' has the name 'Customer Merge Custs'. Item names must be unique among immediate siblings. (DuplicateItemName)
More than one Field in the Entity 'Customer' has the name 'Customer Merge Custs'. Field names must be unique within an Entity. (DuplicateFieldName)
More than one item in the Entity 'Pricing Service Layout Detail' has the name 'Pricing Service Extensions'. Item names must be unique among immediate siblings. (DuplicateItemName)
More than one Field in the Entity 'Pricing Service Layout Detail' has the name 'Pricing Service Extensions'. Field names must be unique within an Entity. (DuplicateFieldName) ---------------------------------------------------
Examining any of the above tables in SQL Server Management Studio does not reveal any duplicate column names. In fact, 'Customer_Merge_Custs' does not appear to be a column in 'Customer' nor does 'Pricing_Service_Extensions' appear in 'Pricing_Service_Layout_Detail'.
As an experiment, deleting the table 'Pricing_Service_Extensions' and regenerating did make the two associated messages go away.
Basically, I want to set GeneratedDesc = Data1 + ' ' + Data2 + ' ' + Data3 where an account sets the order 1,2,3
GeneratedDesc = Data2 + ' ' + Data3 + ' ' + Data1 where an account sets the order 2,3,1
Basically, The Generated Description is set in an order that is chosen by the Account.
I am not sure how to go about doing this, outside of dynamically generating the query and looping throughout all the rows in the table, which, i think for large amounts of data, can get expensive. I don't think creating a query for each combination would be good either (in this case, 6 combinations, but for larger order sets, such as 6, can get quite alot of queries).
any ideas? (not sure if this makes sense to anyone)
We have an MIS system which has approx 100 reports. Each of thesereports can take up to several minutes to run due to the complexity ofthe queries (hundreds of lines each in most cases). Each report can berun by many users, so in effect we have a slow system.I want to seperate the complex part of the queries into a process thatis generated each night. Then the reports will only have to querypre-formatted data with minimal parameters as the hard part will havebeen completed for the users when they are not in. Ideally we willgenerate (stored procedure possibly) a set of data for each report andhold this on the server. We can then query with simpler parameterssuch as by date and get the data back quite quickly.The whole process of how we obtain the data is very complex. There arevarious views which gather data from the back office system. These arevery complex and when queries are run against them including othertables to bring in more data, it gets nicely complicated.The only problem is that the users want to have access to LIVE datafrom the back office system, specifically the Sales team who want toaccess this remotely. My method only allows for data from the nightbefore, so is there an option available to me which will allow me todo this ? The queries can't be improved on an awful lot, so they willtake as long as they take. The idea of running them once is the onlyway I can see to improve the performance in any significant way.True I could just let them carry on as they are and let them sufferwith the performance on live data, but I'd like to do something toimprove the situation for them.Any advice would be appreciated.ThanksRyan
I have a stored procedure that is pulling 3 parameters: @user_id, @, begin_date and @end_date. The parameters are setup in the 'parameters' tab of the data set, and also the 'report parameters', however, when I go to run report, I get textbox for user_id, instead of a drop down with pick list.
I tried creating a separate dataset to bring in user_id's only and manually create a parameter for it in 'report parameters'. I then get a drop down box with repeating data, and when I run the report, I get back all user_id's instead of the one I chose.
I'm finding the parameters are the most difficult concept within RS. Does anyone know I can make this work?
I need to copy data from warehouse tables to master tables of different SQL instances. Refresh need to done once in an hour. What is the best way to do this? SQL agent jobs or SSIS packages?
Hi, I'm using SQL Express Advanced CTP and I'm in the process of adding a search facility to an asp.net site. I'm having a huge problem deciding the easiest and most optimised method to use when creating the index using multiple tables and where I can't seem to to produce a unique, clustered index. The site I'm testing on is a portal in which we have various, different clients advertising their business. A user will be able to search using keywords such as business activity, business location and anything else that may appear in the business / publicity descriptions. A publicity (publicity_id) may belong to one or more TOWNS (ville_id), e.g., Business A might have a promotional offer that applies to three local towns, Business B to all towns and Business C to just one town. A publicity may belong to one or more ACTIVITIES (activity_id), e.g., Business D is a resturant but has also a bar and Business E belongs to prêt-à -porter, fashion, and beauty. I'm using a view (ActivePubs) to produce a query across multiple tables Clients (business name), Publicities (publicity descriptions), Towns and Activities. So from the nature of how the publicities are connected to activities and towns, I have many to many relationships that produce duplicate publicity_id values when I create the view, and thus this provides a problem when trying to create a unique, clustered index on ActivePubs; and none of the coloumns produce unique values that monotonically increases, ideal, I believe, for creating unique, clustered indexs. I have also read that it is only best to use interger values for creating unique, clustered indexes. I thought that if I SELECT the row number in ActivePubs, SELECT ROW_NUMBER() OVER (ORDER BY dbo.Publicities.publicity_id) AS ROWNUM, ... in addition to the rest of the query, then I might be able to use the unique values from the query result to create the unique, clustered index CREATE UNIQUE CLUSTERED INDEX CL_Inx_Pubs ON ActivePubs(ROWNUM) but instead this produces the following error... Cannot create index on view "ActivePubs" because it contains a ranking or aggregate window function. Remove the function from the view definition or, alternatively, do not index the view. So I scrapped this idea but without this method using just CREATE UNIQUE CLUSTERED INDEX CL_Inx_Pubs ON ActivePubs(publicity_id) I get the following error... CREATE UNIQUE INDEX terminated because a duplicate key was found for object name 'ActivePubs' and index name 'CL_Inx_Pubs'. The duplicate key value is (32). I did consider NOT using a UNIQUE clustered index, but got this error... Cannot create nonunique clustered index on view 'daysandnights.ActivePubs' because only unique clustered indexes are allowed. Consider creating unique clustered index instead. The only other method I think about using is storing the query in a temporary table instead of using a view, then creating an additional column in the temporary table to store a unique, automatically incremented, PK for the table to give me my unique index, but my guess is that this is overkill? Much appreciate any help you can provide. Deakus
Hello,We are developing an application against an MS SQL Server 2000 databasewhich requires that we implement full-text searching across columns inmultiple tables. The research that we have conducted seems to indicatethat this is not directly possible within SQL Server 2000. And we canfind no way to implement this as the catalogs that are generated aretable specific.As a work-around, we are planning to create a secondary table usedstrictly for searching which is going to denormalize and combine thesearchable data into one catalog. We just want to confirm that this isthe recommended approach or if there is an alternate solution anyonehas used. Please note that upgrading to SQL Server 2005 is not anoption.Thanks.John FlemingJoin Bytes!
Hi, I have tried this code from http://jtkane.spaces.live.com/Blog/cns!1pWDBCiDX1uvH5ATJmNCVLPQ!316.entry for full-text search on multiple tables & columns. Here's my code: SELECT * from [tStaffDir] AS e, [tStaffDir_PrevEmp] t,CONTAINSTABLE([tStaffDir], *, @Name) as AwhereA.[KEY] = e.[ID] andt.[ID] = e.[ID] I have FT the both the tables above and I am able to get results from the [tStaffDir] table but not the [tStaffDir_PrevEmp] table.The [tStaffDir_PrevEmp] table does have a column (which is [ID]) that is indexed, unique and non-Nullable.Please advise what I should do and look out for. Many Thanks.
Hi, There have been a number of posts on querying multiple tables using full text in SQL Server. I haven't quite found the answer I'm looking for, and I'm aware that in 2005 some full text functionality changed. I have an Events table which joins to a Venue table and also a many-to-many link (via a table called EventsToArtists) to an Artists table.When a user searches for "Rolling Stones Wembley" (without the apostrophes), I want the query to look in the following columns:Event.EventNameEvent.DescriptionArtists.ArtistNameVenue.VenueNameI have done quite a bit of testing on this, and haven't yet got the desired results. Rolling Stones will be found in the Artists table, and Wembley in the Venue table. At the moment, if I search for Rolling Stones, it behaves as expected. But if search for the venue name as well I get no results. I'm pretty sure this is because EventName wouldn't contain all key words and so the record is excluded from the results. At the moment I am using INNER JOINs between the tables....perhaps I should be executing a full text search on each table's catalogue and then do a UNION to join the resultsets?Hope you can point me in the right direction.Thanks
hi friends, i need the steps for full text search with more than one tables in single database. I know the steps for full text search by single table in single database. Thanks in advance
Hi all, I am using Visual web developper 2005 with sql server express 2005 and i have also sql server management studio express. it's all free now . my web site is ready I didn't have problem to upload my site to my hoster. Now I want to upload all my tables and my stored procedure create locally with VWD express How can i do it ? NB: I know i can't design DB (create/modify tables and stored proc) with express edition thank's for your help
Hi all, I have a large Excel file with one large table which contains data, i've built a SQL Server DataBase and i want to fill it with the data from the excel file.
