I am executing a DTS package from within a java application using the xp_cmdshell procedure and dtsrun via JDBC.
My question is how do I pass back error info on the DTS package to my app?!
Any help is appreciated!
Hi!
I want to log package info like when the package starts and ends, and write info to a sql server table. there are of course many ways to do this. I just want some opinions from you if you have some clever ways to do this.
regards geir f
Ok, I understand it is possible, but I still can't quite get the mechanics of it to work.
I create a new BIDS project, and add a package to it, and add 3
connection managers, and set the server, instance, DB, etc. for SQL
connections. I change the name of each connection manager so the server
name is not there, but use something more like a generic name of what
the database is. Fine. I right click in the Control Flow area and go to
configurations. I enable configurations, and save to a common place on
the C drive. Save everything, exit, VS, fine, and I export all
connection managers properties.
Then I start Visual Studio again. Create another new BIDS project, add
a package to it, and add 3 connection managers. I don't actually
connect them, but use those same generic names from the first
iteration. I enable configurations for the package. I am somewhat
expecting to see the connections change from the same-o-default to the
data I used in the first go around.
I am obviously missing something big here.
The scenario is an ETL that takes flat file feeds via FTP to move data into varous production SQL server databases nightly.
There are a number of packages involved, and this depends upon the type of data being sent.
There are a set number of servers and databases to receive the
transformed data. I would like to be able to define say 3 servers, and
maybe a couple of databases in each one time in the configuration. For
simplicity lets say 6 databases total. I would like a single point of
maintenance for these 6 locations. I would like all connection managers
in all packages in all solutions to share these 6 settings in all
connection managers. Is this possible? From my initial attempts, it
would appear each package gets its own independent list of connection
managers and which must be configured separately. I don't see how to
share settings, which is really where the power of SSIS configurations
would be.
Similarly, I would like to be able to locate flat files at given paths.
The package may know the name of the file it is looking for, or the
file it will create, and the folder path needs to be computed from a
configured folder root, and for the package connection manager to store
only the name of the file, which never changes.
I can not see how to set something like this up with connection
managers and configurations. Perhaps I still need a highly customized
solution to achieve this, as we did for DTS, where we would only
execute packages using our own executor, which would load the package,
search out all environment specific settings and modify them on the fly
prior to executing the package.
Thanks for any direction you can give here. The books I've read seem to
imply I might be able to do what I need here, but I can't seem to find
the mechanics of making it happen.
It is pretty easy to create the package configuration to the shared, never-changing path to XML file. But to get this to work, I have to add a bunch of package variables which are driven from the configuration. I then use expressions to compute actual paths to source files and packages.
This business of copying a block of variables from one package to another is extremely tedious, and at least to me, something of a maintenance issue. I have found if I get ahead of myself and forget to create the variables first, then Visual Studio is NOT very forgiving, and will complain repeatedly just prior to crashing without the offer to save anything. If I add a new variable, it is like an easter egg hunt. This does NOT feel very single point of maintenance when variables must be used in this way to really effectively apply configuration, and it is so tedious and error prone, and unforgiving. I seem to spend a great percentage of time copying the names and datatypes and values of variables ONE AT A TIME. What is that all about?
I hear people telling the praises of configurations, but I must be missing something.
With DTS I used a system where global scope settings were "injected" into packages as they ran, and I never had to worry about anything, and it was damn hard to goof it.
Please someone, evangelize me!! Are people bypassing VS and using NOTEPAD on the packages or something like that to save time?
I have deployed to production a number of nested packages (parent packages that call child packages) to the SQL msdb via the Save As option rather than building a deployment utility. These packages reference configuration files in a static location off of the c: drive on the production server. In the development environment, when connection changes are made and I run the Reload with Upgrade option the connection manager takes on the new server and user id settings. However, out on the production side I get the following error from the SQL job log:
Cannot load the XML configuration file. The XML configuration file may be malformed or not valid.
As a result the SQL job uses the default connection information which references the development database rather than the production database. I did research the error but found no good solutions. Is there a way to ensure the configuration files are formed correctly and that the packages are correctly referencing the configuration files? We are trying to run the ETL updates via a SQL job.
Any suggestions? Thanks.
T
We just installed SQL Server 2000 (as part of SBS 2003) including service pack 3a.
When we reboot the server a message pops up that a service did not start properly.
The error is 'SuperSocket info: (SpnRegister): Error 8206'.
I have searched here and other places on the Internet without any success.
All assistance is appreciated as we cannot continue.
So far I have not been able to figure out how to get more info
regarding the sql server errors. For example, I get this error
from sql server query analyzer (this just an example):
-----------
Server: Msg 128, Level 15, State 1, Line 5
The name 'does' is not permitted in this context.
Only constants, expressions, or variables allowed here.
Column names are not permitted.
-----------
Is there a way to find more information regarding this error, or
like Oracle has MeataLink, where you can search, if someone else
already got this error and how it got resolved?
Or how you folks go about resolving errors you get? Is it based
on trail and error, or experience (like already encountered this
type before) etc.?
Hi,
SQL Server returned me error 8623 "Internal Query Processor Error: The query processor could not produce a query plan." I've looked for info in the SQL books, but there's no info about this error. I would appreciate it a lot if somebody could tell me what this error means, how is it triggered, and if it's possible, how to avoid it.
Thanks a lot,
Federico
I want to be able to see when records have been added to a table. The issue is we have a DTS job scheduled to run every night. The developer who wrote it password protected it and doesn't work here anymore. I want to add a step to this series of DTS jobs and want to run it just prior to his job. Is there a way to see when the records are being added or when this job is being run? Thanks again, you guys are the best.
ddave
i seem to be getting a lot of this "SuperSocket info: (SpnRegister) : Error 8344" errors in my event viewer. Does anyone know what this is ?
View 1 Replies View RelatedHi All,For hardware upgratdation we have to move our database server(MSSQL2000) from a P3(Window 2003) machine to a p4(Windows 2003) machine. Wehave replicated the data from P3 machine to P4 machine.the replication was success full.After this we have changed the name of the p4 machine to tha of p3machine.now when we try to connect to the new p4 machine using the windowsauthentication we are not getting errror "Cannot generate SSPIContext."for solving it we have tried to change the name of the sqlserver.REF:http://groups.google.co.in/group/mi...0b0966be28f835ewhile replication the database we have made the mssql service run undera network account.this could be a possible reason for not able to register with the ADS.Later we have changed it to run under the local user account.Any help will be highly appreciated.Mayank
View 1 Replies View RelatedHi All:I am getting an error when trying to open a recordset in SQL Server 2000.The error states that the transaction log is full. Is there any way I canclear out or empty the transaction log, or get rid of it alltogether as itis not really needed?Any help would be appreciated.Thanks and regards,RyanThe error msg is: tempdb transaction log is full. B/U transaction log tofree up space..."
View 2 Replies View RelatedQuestion 1: SQL TimeOut Error
I get this when i run my program and when it happens the program no longer displays data from the database. When i restart the program it seems to work fine. Is there away to fix this or at least make a message to the user telling them to restart the program?
Question 2: Can I e-mail form info to myself?
I want the user to be able to fill a form and click submit and have it emailed to myself. how can i go about doing that?
{Edit}The Below is for a different project
Question 3: Picture Box' and SQL
Can I make it so the user a browse for a picture as his Avatar or Just his Picture and the save it to the Database again?
ie
Fill In This Form To Complete Registration:
Picture: {Pic Box Goes Here} [Browse]
Name:
Date of Birth:
(at this point im going to stop)
thx so much
Hey...
I am running a parent SSIS package (running sp2, 9.0.3042) that calls several child packages.
On our development server, we now cannot run this because we get 1 or more of these errors:
"Error 0x80004003 while preparing to load the package. Invalid pointer . "
"Error 0xC0011008 while preparing to load the package. Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored. . "
It is not occuring on the same packages. It varies every time it is run.
I can run every one of the child packages individually, using the same login ID that the parent is executed under.
The parent package works fine on my local machine and other servers running the same version of SSIS. Just not on this server.
Does anyone have any ideas???
Thanks
BobP
When I attempt to move a package to another server, or sometimes just try to open it on another server, I get the useless message "The parameter is incorrect". All of my connections are valid on the new machine, and even if they weren't I should be able to correct them in design mode on the new server. This is REALLY making it difficult to design a package on the development server, then move it into production.
View 1 Replies View Related
All,
Could someone please tell me what to do with it and what might be causing it?
The packages were fine yesterday.
Here is the error message:
[Script Component 1 1 [3941]] Error: System.Runtime.InteropServices.COMException (0x80040154):
Retrieving the COM class factory for component with CLSID {A138CF39-2CAE-42C2-ADB3-022658D79F2F}
failed due to the following error:
80040154. at Microsoft.VisualBasic.Vsa.VsaEngine.CreateEngine()
at Microsoft.VisualBasic.Vsa.VsaEngine.CheckEngine()
at Microsoft.VisualBasic.Vsa.VsaEngine.set_RootMoniker(String value)
at Microsoft.SqlServer.VSAHosting.Runtime.CreateVsaEngine()
at Microsoft.SqlServer.Dts.Pipeline.ScriptRuntime..ctor(String projectName,
String moniker, String language, Boolean showErrorUI)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.CreateUserComponent()
Thanks in Advance
HI ALL.
I HAVE A PACKAGES WHICH THEN EXECUTES CHILD PACKAGES. tHE CONNECTION managers are specified. and environmental variables are saved on xml file. when i run(debug) parent packages on BIS , it gives me error saying the "error loading package file "childpackage_name.dtsx1st ".the system canot find the file specified.
how ever if i build solution it gives me output saying build successful..
i do not ge this..
anyhelp guys.
HelloWe ran into a peculiar problem. We copied all of our DTS packagesfrom one server to another server (both of which run SQL 2000 and areon the same Service Pack 3/3a). When we execute an embedded DTSpackage from within anothe DTS package, we get the following error:Error Title: Server BusyError Description: This action cannot be completed because the otheprogram is busy. Choose 'Switch To' to activate the busy program andcorrect the problem.Buttons Available: Swith To..., RetryButtons Disabled: CancelDoes any one know about this error and what to do about it?ThanksJagannathan Santhanam (Jags)
View 1 Replies View RelatedWhen I try import a SSIS package into the MSDB I get the following error message:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
The SQL server specified in SSIS service configuration is not present or is not available. This might occur when there is no default instance of SQL Server on the computer. For more information, see the topic "Configuring the Integration Services Service" in Server 2005 Books Online.
The .Net Framework OleDb Data Provider requires Microsoft Data Access Components(MDAC) version 2.6 or later. Version 2.12.4202.3 was found currently installed. (MsDtsSrvr)
------------------------------
BUTTONS:
OK
------------------------------
I do have default instance installed and the SSIS servie is running. When I look at the SSIS service configuration it shows a period for the server which I thought meant local host. Also I have MDAC 2.8 installed. What else do I need to look at?
Hi ,
I have an issues that worries me alot. I have SSIS packages scheduled in SQL Agent and they sometime error out or hang in Agent but never when i run them in BI IDE (Visual studio). There are two particular packages that always hang, alway in Agent but when i run them in BI IDE, they run just fine. Im was running them under in Agent under type= Sql server intergration services and also tried running under type = Operating System (CmdExec). Both types have the same problem. The packages hang. The log files dont say much, because the packages hang, no logging is doing so i dont get any infomation to determin what is going on. Can someone please help me ou.
Hi guys,
i'm running my SSIS package via a web application,
Microsoft.SqlServer.Dts.Runtime.Application app = new Microsoft.SqlServer.Dts.Runtime.Application();
Package pkg = app.LoadFromSqlServer("\send mail test", "localhost", null, null, null);
Variables vars = pkg.Variables;
vars["username"].Value = "C# user Name ";
vars["message"].Value = "C# body text";
DTSExecResult result = pkg.Execute();
//MessageBox.Show(result.ToString(), "result from dts"); --app mode
now sometimes the "result" variable return Failure, but i don't know what's wrong, when i run the package in debug mode (in VS) it works fine. DTSExecResult only returns "Success" or "Failure", is there a way to find out more information about the result. like why did the package fail?
the ssis package is built with event handlers but they don't get triggered. it's just when i execute from the web it just returns failed. i checked all the SQL connections as well, they are all fine, as they use SQL authentication, and connection strings are hardcoded as expressions.
any help?
Hello,
I have a SSIS package and I am trying to build it using devenv.com from command line. It gives me this error:
Error: Could not get a list of SSIS packages from the project.
However if I open the project in Visual Studio it builds properly. In project property I have set CreateDeploymentUtility=true.
This is what I do from command line:
devenv.com MySSIS.sln /Build "Development|Default"
Any idea what I should do ?
Thanks
Deval
Hi All
View 4 Replies View RelatedHi,
I recently encountered an error when I created several copies of one package.
It's always nearly the same package with small modifications. I call this packages from a parent package which is part of our datawarehouseing-framework.
The problem is, when copying a packages or using a packages as template the packages' IDs and Task's-IDs are the same. And this isn't only an issue concerning logging!! :
When the parent package calls one of the copied packages the first task is executed in every package parallely. Furthermore ... when I for example set a breakpoint on a data transformation task in one of the packages, the breakpoint is set in all packages on the same task! This is resulting in strange errors because the tasks-states and variable values seem to get mixed up.
Unfortunately there is only a possibility to change the package's ID, but the IDs of tasks are readonly!
One solution is, to create a new package and copy all the tasks to the new package which creates new IDs, but doing so, I have to manually recreate a long list of variables, all the configurations, all the connection-managers once again. Furthermore I loose the layout of tasks.
I found some posts about it here
http://groups.google.de/group/microsoft.public.sqlserver.dts/browse_thread/thread/6f85a31ea190608a/0eae312aa8440cf8?lnk=gst&q=pitfall&rnum=1&hl=de#0eae312aa8440cf8 or
http://groups.google.de/group/microsoft.public.sqlserver.dts/browse_thread/thread/760093d58bf6ccb5/32ced2f2020ef3f7?lnk=st&q=data+flow+task+id+copy&rnum=2&hl=de#32ced2f2020ef3f7
saying the issue will be fixed by SP2, but now I don't see any comment on it in the CTP of Service Pack 2.
Is there any solution to this problem or official roadmap about a fix from Microsoft??
Greetings Monte
I've run into a problem with SSIS packages wherein tasks that write or copy files, or create or delete directories, quit execution without any hint of an error nor a failure message, when called from an ASP.NET 2.0 application running on any other machine than the one where the package was created from. By all indications it appeared to be an identity/permissions problem.
Our application involves a separate web server and database server. Both have SQL Server 2005 installed, but the application server originally only had Integration services. The packages are file system-deployed on the application server, and are called using Microsoft.SqlServer.Dts.Runtime methods. For all packages that involve file system tasks, the above problem occurs.
When the above packages are run using the command prompt (either DTEXEC or DTEXECUI) the packages execute just fine. This is expected since we are using an administrative account. However when a ShellExecute of the same command is called from ASP.NET, the same problem occurs.
I've tried giving administrative permissions to the ASPNET worker process user to no avail.
I have likewise attempted to use the SQL Server Agent job approach but that approach might not be acceptable for our clients since it means installing SQL Server 2005 Database services on the application server.
I have read the relevant threads in this forum, namely http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1044739&SiteID=1 and http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=927084&SiteID=1 but failed to find any solution appropriate for our set up.
Anybody got any idea on how to go about this?
Hello All,
I am working on an application used to move packages (SSIS Packages) from one server to another.The packages are saved under MSDB folder.
Case: When the application is running on my system, i try to copy packages created from another server to my Server.I am using package protection level as "Server Storage". When i try to execute the coppied package from my system, it is giving me error.
An oledb error has occured, Error Code 0x80040E4D, An Oledb record is available, Source : Microsoft OLedb Provider for Sql Server", Description : "Login failed for sa".
Case : When the Package Coppier application is running on my system, i try to copy packages created on my server to my another Server.I use the same package protection level as "Server Storage". When i try to execute the copied package on destination server it is working fine without errors.
Please guide me on this issue, as soon as possible
Thanks And Regards
Subin
I've just installed sql 2005x64 and sp2 on a active/passive cluster on 2003. Everything is working fine except browsing the stored msdb packages in SSIS. Remote acces is enabled - as are named pipes. I've tried doing this on the local server as well. I was able to create a maintenance plan and run it with no problems.
We got an error during the install pertaining to SSIS, but hit ignore and it went on successfully.
It was - failed to install and configure assemblies .....MSMQTask.dll in the com+ catalog. Error -2147467259.
description: Error HRESULT E_FAIL has been returned from a call to a COM component.
The browsing error is below.
Thanks!
Sam
TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
The SQL server specified in SSIS service configuration is not present or is not available. This might occur when there is no default instance of SQL Server on the computer. For more information, see the topic "Configuring the Integration Services Service" in Server 2005 Books Online.
Login timeout expired
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
Named Pipes Provider: Could not open a connection to SQL Server [2]. (MsDtsSrvr)
------------------------------
BUTTONS:
OK
------------------------------
I encounter this error when importing SSIS packages using SQL Server Management Studio:
===================================
Unable to cast object of type 'Microsoft.SqlServer.Dts.ObjectExplorerUI.ImportPackageAsAction' to type 'Microsoft.SqlServer.Dts.ObjectExplorerUI.ISimpleAction'. (Microsoft.SqlServer.DtsObjectExplorerUI)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.ObjectExplorerUI.DtsServerMenuItem.Invoke(INodeInformation parent, String mode, String assembly, String type)
The Integration Services that I'm using has just been rebuilt due to problems after installing SP2. I'm using Integration Services 9.0.3042. I can't find anything having this same problem. Any help will be appreciated.
Thanks!
We manage some SSIS servers, which has only SSIS and SSIS tools installed on them and not the sql server DB.
SSIS packages and configuration files are deployed on a NAS. We run the SSIS packages through DTEXEC by logging in to the server.
We want to allow developers to run their packages on their own on the server, but at the same time we dont want to give them physical access on the server i.e we do not want to add them into RDP users list on server properties. We want them to allow running their packages remotely on the server.
One way We could think of is by using powershell remoting and we are working on that. But is there any other way or any tool already present for the same.
Hello all,
I am trying to execute the ssis packages using code.These packages are hosted on remote server under MSDB in local Network.
Below is the code tried to Execute
--------------------------------------------------
DTSExecResult execRslt = _dtsxPackage.Execute();
foreach (DtsError dtserr in _dtsxPackage.Errors)
{
Console.WriteLine("Source: " + dtserr.Source + ", Description: " + dtserr.Description);
}
I get hte following Error
--------------------------------
"Dupaco Load MMAs"-------------"An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.".
"
"Data Flow Task" -------"The AcquireConnection method call to the connection manager "Dupaco" failed with error code 0xC0202009.
"
"Data Flow Task" ----------"component "OLE DB Destination" (119) failed validation and returned error code 0xC020801C.
"
"One or more component failed validation.
"
"There were errors during task validation.
"
When i try to execute the same code on the server where all the package are hosted. It is working fine.
More Info:
In thepackage we are using one "Source Flat file connection" and one "Oledb Destination connection"
Please help me to solve this problem, as my client needs it very badly
Thanks
Subin
Hi.
I have problem executing several SSIS-packages in a chain.
To be more precise:
I have implemented a Biztalk 2006 application which via a local webservice executes an SSIS package. The package it self calls another SSIS package, which is located in the same folder as the calling package. The second package then calls a third package etc.
The problem arises, when the first package calls the second package. An Access Denied exception is received. Can any one explain me how to fix this?
The user connected to the application-pool that the weservice is running under, has execution-rights on all of the packages.
Thanks
Hi all
Our data management system currently runs DTS packages using DTSPKG.dll.
I am currently looking at the possibliity of replacing the DTS packages and SQL 2000 with DTSX packages using SSIS in SQL 2005.
Do I need a new dll? or will the current dtspkg.dll handle the new DTSX packages?
Many thanks in advance!