Hi,
When a record is to be inserted, how can I check whether the insert is succeeded or not?
CREATE TRIGGER MY_TRIGGER ON MyTable AFTER INSERT
AS
DECLARE @id INT
DECLARE @name NVARCHAR(50)
SELECT @id=id,@name=name FROM INSERTED
BEGIN
INSERT INTO MySubTable(id,name) VALUES(@id,@name)
-- if failed, rollback
END
GO
GO
This problem is being seen on SQL 2005 SP2 + cumulative update 4
I am currently successfully using the output clause of an insert statement to return the identity values for inserted rows into a table variable
I now need to add an "instead of insert" trigger to the table that is the subject of the insert.
As soon as I add the "instead of insert" trigger, the output clause on the insert statement does not return any data - although the insert completes successfully. As a result I am not able to obtain the identities of the inserted rows
Note that @@identity would return the correct value in the test repro below - but this is not a viable option as the table in question will be merge replicated and @@identity will return the identity value of a replication metadata table rather than the identity of the row inserted into my_table
Note also that in the test repro, the "instead of insert" trigger actually does nothing apart from the default insert, but the real world trigger has additional code.
To run the repro below - select each of the sections below in turn and execute them
1) Create the table
2) Create the trigger
3) Do the insert - note that table variable contains a row with column value zero - it should contain the @@identity value
4) Drop the trigger
5) Re-run the insert from 3) - note that table variable is now correctly populated with the @@identity value in the row
I need the behaviour to be correct when the trigger is present
Any thoughts would be much appreciated
aero1
/************************************************
1) - Create the table
************************************************/
CREATE TABLE [dbo].[my_table](
[my_table_id] [bigint] IDENTITY(1,1) NOT NULL,
[forename] [varchar](100) NULL,
[surname] [varchar](50) NULL,
CONSTRAINT [pk_my_table] PRIMARY KEY NONCLUSTERED
(
[my_table_id] ASC
)WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF, FILLFACTOR = 70) ON [PRIMARY]
)
GO
/************************************************
2) - Create the trigger
************************************************/
CREATE TRIGGER [dbo].[trig_my_table__instead_insert] ON [dbo].[my_table]
INSTEAD OF INSERT
AS
BEGIN
INSERT INTO my_table
(
forename,
surname)
SELECT
forename,
surname
FROM inserted
END
/************************************************
3) - Do the insert
************************************************/
DECLARE @my_insert TABLE( my_table_id bigint )
declare @forename VARCHAR(100)
declare @surname VARCHAR(50)
set @forename = N'john'
set @surname = N'smith'
INSERT INTO my_table (
forename
, surname
)
OUTPUT inserted.my_table_id INTO @my_insert
VALUES( @forename
, @surname
)
select @@identity -- expect this value in @my_insert table
select * from @my_insert -- OK value without trigger - zero with trigger
/************************************************
4) - Drop the trigger
************************************************/
drop trigger [dbo].[trig_my_table__instead_insert]
go
/************************************************
5) - Re-run insert from 3)
************************************************/
-- @my_insert now contains row expected with identity of inserted row
-- i.e. OK
i am trying to create a trigger which when I insert a "y" on a student table in insCheck column, instructor table will create a record of the same person.
The reason is there are two tables are in my DB, student and instructor table. Student can be a instructor so whenever insCheck conlum in studnent table is checked as "y", instructor table should be populated.
Both table studentId and instructorId inserted as manually so that I am not sure how i should populate the instructor's table just fName, mI, and lName and I have go back to the instructor table and populate the rest of the table manually or is there any way to poppulate the insturctorid also while trigger is populate the name onthe instructor table.
My Two tables DDL are like down below
create table student(
studentId char(4) not null primary key,
fName varchar(25) not null,
mI char(1) null,
lName varchar(25) not null,
insCheck char(1) not null,
);
create table instructor(
instructorId char(4) not null primary key,
fName varchar(25) not null,
mI char(1) null,
lName varchar(25) not null,
instructorQual varchar(100) not null,
);
thanks for your help in advance!
gazawaymy
hello everyone ,
i have a table named "Employee" with EmpID as PK.
i want to insert EmpID one by one in another table named "AssignedComplaints"
so if i have all the EmpID inserted in "AssignedComplaints" table then on next insert operation , the first EmpID will be inserted and then second on so on.
like i gave u a sample
i have three EmpIDs in "Employee" table named M1,M2,M3
first M1 is inserted secondly M2 and lastly M3.
now i have all EmpID in "AssignedCompalints" table.
now if i do want to insert again then the whole process will repeat , first M1 will be inserted secondly M2 and so on.
i need the query
i have created a trigger and will use this query in that trigger.
thanks
Hi,
i am facing a problem with creating a Trigger to insert into another table.
i have 4 tables namely:
PurchaseOrder
PurchaseOrderItem
DeliveryOrder
DeliveryOrderItem
i want the trigger to create a new row in the DeliveryOrder when i creates a PurchaseOrder.
I tried the following:
CREATE TRIGGER trgInsertPO
ON PurchaseOrder
FOR INSERT
AS
INSERT INTO DeliveryOrder (DeliveryOrderNo,DeliveryOrderDate, SupplierID, DeliveryOrderStatus)
VALUES (PurchaseOrderNo,PurchaseOrderDate,SupplierID,'d')
GO
but it cant work. Help required.
Thanks.
Can an INSERT statement also return all columns inserted as a result set? If so what clause of the INSERT statement does this?
View 3 Replies View RelatedCan an INSERT statement also return all columns inserted as a result set? If so what clause of the INSERT statement does this?
View 2 Replies View Relatedhow can insert statement script of data present in sql server can
be generated in a .sql file
I'm trying to Insert data from a linked server connection into one of my tables in the sql database. it seems to be giving me an error saying column cant be found. It only does this when I put the Where clause in the statement. I dont have the server in front of me but this is how my statement looks.
Insert into WorkList (DSK)
Select *
From OPENQUERY (SCH, 'Select Desk_ID from public.ACCOUNT Where Desk_ID = LA1')
Hi there can anyone help me to create a SQL Insert Statement. I dont know SQL at all.
To explain, I have two web pages. search.asp and results.asp.
search.asp has the following.
Form Name: searchForm
Set to: Post
Action: results.asp
Text Field: Keyword
Drop Down: CategoryTable
Drop Down: Location
UserName Session Variable: MM_UserName
results.asp has the following SQL which pulls all the results.
SELECT SupplierName, Location, ShortDescription, TimberSpecies, CategoryTitle, Country, CustomerType
FROM Query1
WHERE TimberSpecies LIKE '%MMColParam%' AND CategoryTitle LIKE '%MMColParam2%' AND Location LIKE '%MMColParam3%' AND CustomerType = 'Trade/Retail'
ORDER BY CategoryTitle, TimberSpecies ASC
The database & form I want to insert into.
tblSearcheResults
idSearch (AutoNumber)
location (Text) "Want to insert the 'Location' result here"
category (Text) "Want to insert the 'CategoryTable' result here"
user (Text) "Want to insert the UserName Session Variable result here"
result (Text) "Want to insert the 'Keyword' result here"
Please ask if u need more info.
Mally
Hello,
I have a trigger on a table named Store. The trigger updates the longitude and latitude on store based on the zip. Simple right? Well, I'm trying to import data and of course the trigger is not updating the data as triggers are not on a row by row basis with multi row inserts.
Here is the error message I'm receiving:
Msg 512, Level 16, State 1, Procedure SetLongLat, Line 17
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
How would one go about resolving this issue? I've includes my snippets below:
Trigger:
Code Block
ALTER TRIGGER [dbo].[SetLongLat]
ON [dbo].[Store]
FOR INSERT, UPDATE
AS
BEGIN
SET NOCOUNT ON;
DECLARE @Long float
DECLARE @Lat float
SELECT @Long = LONGITUDE, @Lat = LATITUDE
FROM Zipcode..ZipcodeLite
WHERE ZIP_CODE = (SELECT Zip FROM Inserted)
UPDATE Store SET Longitude = @Long, Latitude = @Lat
FROM Store INNER JOIN Inserted ON Store.Id = Inserted.Id
IF UPDATE(Zip)
BEGIN
UPDATE Store SET Longitude = @Long, Latitude = @Lat
FROM Store INNER JOIN Inserted ON Store.Id = Inserted.Id
END
END
Thanks for your help!
Nathan
I have two tables:tb_news---story_id-productlisttb_lookup---story_id-productwhen an insert command is run on tb_news, productlist field ispopulated with a value such as 'abc, def, de'when this happens, i need tb_lookup to be populated with seperaterecords for each product in productlist and the story_id from tb_news.Example:INSERT INTO tb_news (story_id, product_list)VALUES (12345, 'abc, def, de')Results:tb_news--12345, 'abc, def, de'tb_lookup--12345, 'abc'12345, 'def'12345, 'de'Ideally, I would like this to use recursion and give me tha ability tochange the delimiter at any time (might not always be a comma). someproducts may have a period in them. number of products is unknown andmight be 0 (field may be empty or NULL).
View 2 Replies View RelatedWhat statement do I use, as part of an insert trigger, to insert xml data from the xml database to a flat file database, to check if a record with a specific ID exists to delete first then insert the changed record, instead of adding the changes or an updated from the original xml database.
What I’m trying to do is take the xml formatted data out of one sql server database and insert the data only in that xml into a another sql database. So I can play with the data.
Problem is if the data in the xml is updated or changed for a specific record on the original xml database then the trigger inserts another copy into the created database (which I don’t want).
This is on SQL Server 2008R2.
Hi,
If I want to automatically insert a record which has default value in a table,
how can I create the trigger?
Table 1
First_Name
Middle_Name
Surname
John
Ian
Lennon
Mike
Buffalo
Tyson
Tom
Finney
Jones
Table 2
ID
F
M
S
DOB
1
Athony
Harold
Wilson
24/4/67
2
Margaret
Betty
Thathcer
1/1/1808
3
John
Ian
Lennon
2/2/1979
4
Mike
Buffalo
Tyson
3/4/04
5
Tom
Finney
Jones
1/1/2000
I want to be able to create a trigger that updates table 2 when a row is inserted into table 1. However I€™m not sure how to increment the ID in table 2 or to update only the row that has been inserted.
A
ID
Name
1
Joe
2
Fred
3
Ian
4
Bill
B
ID
1
4
I want to be able to create a trigger so that when a row is inserted into table A by a specific user then the ID will appear in table B. Is it possible to find out the login id of the user inserting a row?
I believe the trigger should look something like this:
create trigger test_trigger
on a
for insert
as
insert into b(ID)
select i.id
from inserted i
where
--specific USER
Hello
How can i say this I would like my if statement to say: if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement.
<% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>"
ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)">
<SelectParameters>
<asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" />
</SelectParameters>
</asp:SqlDataSource>any help would be appreciated
Trying to create a dataset for a report. I need to bring back percentage in the result set. The fields that I am using to get the percentage have valid data but the result field is 0.00%. Is there reason I cant bring back a percentage field?
Code:
SELECT JobNum, Mailed, LT_7, BT_6_10, GT_10,
Format([LT_7]/[Mailed], 'p') AS PctScaned1,
Format([BT_6_10]/[Mailed], 'p') AS PctScaned2,
Format([GT_10]/[Mailed], 'p') AS PctScaned3,
[Code] ....
I have 2 tables (#raw1 & #raw2). Each has a year (yr) and month (mnth) and a count (cnt1 / cnt2) field. I need a table created as follows:
2013 2014 2015
cnt1 cnt2 cnt1 cnt2 cnt1 cnt2
jan 5 77 77 8 88
etc....
Normally, I would ask about a pivot but since it is months down one side and year and columns on the top, I don't know if a pivot will work.
create table #raw1 ([yr] int, [mnth] int, [cnt1] int)
insert into #raw1 values
(2013, 1, 5)
, (2013, 2, 5)
, (2013, 3, 5)
, (2013, 4, 5)
, (2013, 5, 5)
, (2013, 6, 5)
[code]....
Hi,
I have a 'Execute SQL Task' in my 'control flow', my 'Execute SQL Task' will return a value which I am assigning to a variable. Based on the value of the variable, I need to control my other flows. If the variable's value is 1 then I should invoke a dataflow, else I should write a failure error message in event viewer. Please could someone provide some inputs on how this can be done.
'Execute SQL Task' ----->value 1 ------>data flow to be executed
'Execute SQL Task' ----->value !=1 ------> write some error message in the event viewer and no tasks should be executed after that.
Thanks
raj
Hi
I am trying to use multiple insert for a table T1 to add multiple rows.
Ti has trigger for insert to add or update multiple rows in Table T2.
When I provide multiple insert SQL then only first insert works while rest insert statements does not work
Anybody have any idea about why only one insert works for T1
Thanks
Hi,
What I would like to do is run a select statement, and then have the result of the select be used/run thru the same select again untill it hits a certain where clause.
This is for a where used search in our BOM (Bill of Material) table.
So for example
BOM 1
level 1 Item# 123 type Finished Good
level 2 Item# 45 type subassembly
level 3 Item# 56 type purchased item
BOM 2
level 1 Item# 678 type Finished Good
level 2 Item# 78 type subassembly
level 3 Item#56 type purchased item
So my input into the select statement would be Item# 56, it will then first find Item# 45 and Item# 78, but those I am not interested in. I want the select to then take Item#45 and Item#78 and run it thru the same select so that it will find Item#123 and Item#678.
The select will know to stop there since these are flagged as "Finished Good" in our system, so they will not be in any other BOM. This is what I would imagine being specified in the "where clause".
I can write the first part, where the select will find Item #45 and Item#78, but don't know how to get past that point.
Any help or suggestions are greatly appreciated!!
Thanks,
Michiel
I want to create a trigger in SQL 2000 Enterprise, but not sure about triggers, how they work, etc. I just know that I was told I could create a trigger when new info is added to one table and check another table to see if this info is already in the other table, if not, copy the data to the other table too.
Would this be what a trigger can do for me?
what would be the best place to learn how triggers work, how to write one and install it, test it, etc?
I have 3 tables on my db, Projects, ProljectAllocationLog and Users
Project consists of Projectid(PK), ProjectName, UserID
ProjectAllocationLog consists of ProjectAllocationID(PK), Projectid, UserID,Date
Users consists of UserID (PK), Fullname
Over the course of time the user allocated to a project may change. The db has been set up to always show the most current user in the UserID of the Projects table,
I want to create a log that will record everytime that user has changed. (ProjectAllocationLog)
Having read through some examples posted on Forums, I believe that I can do this with a trigger, but I am not sure if I am doing it right, the trigger I have written is
Create Trigger tr_UpdateAllocationLog
ON Projects
AFTER Update
AS
If NOT UPDATE (Userid)
DECLARE @PROJECTID
DECLARE @NEWUSER
DECLARE @PREVIOUSUSER
SET @PROJECTID= (SELECT projected FROM Inserted)
SET @NEWUSER = (SELECT UserID from Inserted)
SET @ PREVIOUSUSER = (SELECT UserID from Deleted)
If @NEWUSER <> @PREVIOUSUSER
INSERT INTO ProjectAllocationLog (ProjectID, UserID, Date) VALUES (@PROJECTID, @NEWUSER, GETDATE())
Go
I would appreciate any comments
Hello,
I do have one table "ABC" in DB "Master" & other table "XYZ" in DB "Test".
Both tables are having same structures & same data currently. Now i want to create trigger in such a way that after every insertion & updation on table "ABC" in DB "Master" will insert & update records in table "XYZ" in DB "Test" respectively.
Can any one help me out?
Thanks
Prashant Hirani
Where Dreams Never Ends
I am using MSDE and WebMatrix. My stored procedure is creating a Dynamic SQL query and is is about 200 lines long.
I am not getting the expected results, but also not generating any errors. I inserted a Print statement to print the resultant SQL query, but I don't know how to see or display that print result.
I do NOT have SQL2000, only MSDE. I am using WebMatrix and VB.net to create my application. Is there some class in asp.net that will help me, or some free utility. One of the problems is that the dynamic SQL is using over 20 parameters to create the query; the end result of the user picking fields on the webform.
I am using MSSQL 2000, SQL Server Developer Edition and product version is : 8.00.760 (SP3)
Application Server: JBoss v 4.0.4
Driver : sql 2005 driver.
Hi,
I am running my application in JBOSS and hibernate to do all the query to the DB. While we are testing our application, it is working fine for the 1st day of stress testing, however after running for one days, it starts throwing the following exception. This can occur in a number of method call with no fixed pattern. Anyone has any idea what is going on?
used by: org.hibernate.exception.GenericJDBCException: could not execute query
at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:103)
at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:91)
at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:43)
at org.hibernate.loader.Loader.doList(Loader.java:2148)
at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2029)
at org.hibernate.loader.Loader.list(Loader.java:2024)
at org.hibernate.loader.hql.QueryLoader.list(QueryLoader.java:392)
at org.hibernate.hql.ast.QueryTranslatorImpl.list(QueryTranslatorImpl.java:333)
at org.hibernate.engine.query.HQLQueryPlan.performList(HQLQueryPlan.java:172)
at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1114)
at org.hibernate.impl.QueryImpl.list(QueryImpl.java:79)
at org.hibernate.impl.AbstractQueryImpl.uniqueResult(AbstractQueryImpl.java:756)
at org.hibernate.ejb.QueryImpl.getSingleResult(QueryImpl.java:63)
... 88 more
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doExecutePreparedStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement$PreparedStatementExecutionRequest.executeStatement(Unknown Source)
at com.microsoft.sqlserver.jdbc.CancelableRequest.execute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.executeQuery(Unknown Source)
at org.jboss.resource.adapter.jdbc.WrappedPreparedStatement.executeQuery(WrappedPreparedStatement.java:236)
at org.hibernate.jdbc.AbstractBatcher.getResultSet(AbstractBatcher.java:186)
at org.hibernate.loader.Loader.getResultSet(Loader.java:1669)
at org.hibernate.loader.Loader.doQuery(Loader.java:662)
at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:224)
at org.hibernate.loader.Loader.doList(Loader.java:2145)
... 97 more
Hi, I execute a select statement
SELECT COUNT(*) FROM TABLEA WHERE DTRECORD < '1-MARCH-2008'
every times I execute it I get different result.
1st result : 17036986
2nd result : 17037903
3rd result : 17038309
Any idea??? There is no any inserting on TABLEA, so it should not has changes. Is that because of statistic is still updating?? I don't have much knowledge on this so I cannot sure the cause of the problem. Please advise.
Hi everyone,My brain refuses to remember the (undocumented?) stored procedure I'mthinking of. It takes at least two parameters: a sql statement toexecute, and a table name (or something of that nature).Then, for each value in the table, it executes the sql statement andpasses the value as a parameter.Can anybody refresh my memory? The functionality may be slighlydifferent than described, but the principle is the same. Thanks verymuch...-Joe
View 3 Replies View RelatedI need help writing an Update trigger that puts the current date in a changed record. I understand the basic idea but can't seem to get it to work. Any help would be greatly appreciated
View 1 Replies View RelatedThere are 2 tables: OrderID and Order_Details
CREATE TABLE Orders
(OrderID int
Constraint Order_ID_pk primary key
, CustomerID nchar (5)
, EmployeeID int
, OrderDate datetime
, RequiredDate datetime
, ShippedDate datetime
, ShipVia int
, Freight money
, ShipName nvarchar (40)
, ShipAddress nvarchar (60)
, ShipCity nvarchar (15)
, ShipRegion nvarchar (15)
, ShipPostalCode nvarchar (10)
, ShipCountry nvarchar (15)
)
CREATE TABLE Order_Details
(OrderID int NOT NULL
, ProductID int NOT NULL
, UnitPrice money NOT NULL
, Quantity smallint NOT NULL
, Discount real NOT NULL
, constraint Order_Details_PK
Primary key (OrderID, ProductID)
)
Create a Transact SQL procedure, customer_activity, that would, for a given CustomerID, return the number of orders that customer has made, average amount of all the customer orders, and the maximum customer’s order. The CustomerID should be the stored procedure’s input parameter. The stored procedure should use the view customer_orders.
what kind of code to create this? it says i need to use a view customer_orders, which i made:
create view customer_orders as
select orders.orderID, customerID, sum(order_details.orderID) as orderamount
from orders, order_details where orders.orderID=order_details.orderID
group by orders.orderID, customerID
but i don't know how to do it.
Next: the trigger:
Write a trigger that would, for any order entered (inserted), print the order amount as well as the customer’s average and maximum order so far, by using the view and the stored procedures created in this lab.
please and thank you
I have problem with Triggers,Iv never done it before except @school!!
One of our clients Server has same database names(WeighBridge) but Different Instances(1got Express and Other3 have SQL2005).There is a weighbridge scale on SQL Express Database.
I want to create a Trigger that Automatically updates everytime there is weighbridge scale In other Databases that have SQL2005.
If someone can help please a code or tell me what to do,
Create a Trigger on a Table ot Database??
Please Help!!!!!!
Hi Everyone,
I have a database which once every week gets backup/restored and then renamed for training purpose. The problem is that I got trigger on some of the tables and once the database gets renamed the trigger failed to work as it referring to the old database name. I have idenify all the trigger and done a ALTER TRIGGER. However I can't seem to get it to run as a JOB. Tried to create a store procedure but get a error as the ALTER TIGGER is after CREATE PROCEDURE I could do it as a SQLstring but theirs alot of trigger, want to know if there any other ways of doing it. Please help