All i got so far is this query:
SELECT DATEPART(ww, login) as weeknumber , DATENAME(dw, login) AS day, DATEDIFF(minute, login, logout) / 60.0 as hours
FROM timeliste
WHERE userid = '2'
Which isnt even close to what I want, can anyone give me some clues on what I should do to get it right?
I have to calculate the total working hours between days, there hours must get automatically round off to nearest value example:
Date :12-05-2013 time : 4:15 will change to 4.00 and if Date :13-05-2013 time: 4:25 then needs to 4.30 and sum the above total hours and results Total : 8.30 hrs.
This function will return working hours between given 2 dates. This function assumes that the break is between 9:45 AM and 10 AM and that Lunch is between 12:30 PM and 1 PM. This function also assumes that the working hours are between 7:30 AM and 4 PM. There is a section for public holidays there. We have a table for that you might not so that piece needs to be fixed.
This function will return working hours between given 2 dates. This function assumes that the break is between 9:45 AM and 10 AM and that Lunch is between 12:30 PM and 1 PM. This function also assumes that the working hours are between 7:30 AM and 4 PM. */ AS BEGIN
--check if one of the dates is null if @StartDate is null or @EndDate is null RETURN 0
I need to be able to add minutes to a datetime value, which only cover working hours.
I have a holiday table as below:
Examples: (dd/MM/yyyy hh:mm) Date..........Description 01/01/2015 New Years Day 26/12/2014 Boxing Day 25/12/2014 Christmas Day 25/08/2014 August Bank Holiday
Our Business hours are 08:00-18:00 Mon-Fri (unless the day is in the holiday table)
I have tried to create a function to do this (fn_pp_AddMinutesWithinWorkingHours(@StartDate,@Minutes)) but I am unable to come up with a solution which factors in everything correctly.
Total Validated hours for the Employee 12345 will be 32 NOT 47. How do I list employees who worked less than 80 validated hours. The hours are validated only when it is true.
I know I can do a JOIN(parameter, "some seperator") and it will build me a list/string of all the values in the multiselect parameter.
However, I want to do the same thing with all the occurances of a field in my result set (each row being an occurance).
For example say I have a form that is being printed which will pull in all the medications a patient is currently listed as having perscriptions for. I want to return all those values (say 8) and display them on a single line (or wrap onto additional lines as needed).
Something like: List of current perscriptions: Allegra, Allegra-D, Clariton, Nasalcort, Sudafed, Zantac
How can I accomplish this?
I was playing with the list box, but that only lets me repeat on a new line, I couldn't find any way to get it to repeate side by side (repeat left to right instead of top to bottom). I played with the orientation options, but that really just lets me adjust how multiple columns are displayed as best I can tell.
Could a custom function of some sort be written to take all the values and spit them out one by one into a comma seperated string?
Trying to get a report to run daily between certain hours. I can set a start time and an "end date" in Report Manager, but as far as I can tell, I can't say run hourly every day from X to Y. am I missing something?
If this isn't doable from RS, can I just find the associated job in the Agent and change the schedule of that job?
I have a Report where i want to show in a DataList only those values Filtered by one of the fields of my dataset. I want to show a Date value ONLY if another column value in that row in my dataset = "IN".
But nothing seems to happen here. No records are shown. It's like the condition is never true.
Steps:
1. I drag a DataList
2. I drag a DatasetField inside the DataList (automatically creates a textbox)
3. Right Click on the Datalist, Properties, then Filter Tab
I have data coming from a telephony system that keeps track of when anemployee makes a phone call to conduct a survey and which project numberis being billed for the time the employee spends on that phone call in aMS SQL Server 2000 database (which I don't own).The data is being returned to me in a view (see DDL for w_HR_Call_Logbelow). I link to this view in MS access through ODBC to create alinked table. I have my own view in Access that converts the integernumbers for start and end date to Date/Time and inserts some otherinformation i need.This data is eventually going to be compared with data from someelectronic timesheets for purposes of comparing entered hours vs hoursactually spent on the telephone, and the people that will be viewing thedata need the total time on the telephone as wall as that total brokendown by day/evening and weekend. Getting weekend durations is easyenough (see SQL for qryTelephonyData below), but I was wondering ifanyone knew of efficient set-based methods for doing a day/eveningbreakdown of some duration given a start date and end date (with theday/evening boundary being 17:59:59)? My impression is that to do thiscorrectly (i.e., handle employees working in different time zones,adjusting for DST, and figuring out what the boundary is for switchingfrom evening back to day) will require procedural code (probably inVisual Basic or VBA).However, if there are set-based algorithms that can accomplish it inSQL, I'd like to explore those, as well. Can anyone give any pointers?Thanks.--DDL for view in MS SQL 2000 database:CREATE VIEW dbo.w_HR_Call_LogASSELECT TOP 100 PERCENT dbo.TRCUsers.WinsID, dbo.users.username ASInitials, dbo.billing.startdate, dbo.billing.startdate +dbo.billing.duration AS EndDate,dbo.billing.duration, dbo.projects.name ASPrjName, dbo.w_GetCallTrackProject6ID(dbo.projects.descript ion) AS ProjID6,dbo.w_GetCallTrackProject10ID(dbo.projects.descrip tion) AS ProjID10,dbo.billing.interactionidFROM dbo.projects INNER JOINdbo.projectsphone INNER JOINdbo.users INNER JOINdbo.TRCUsers ON dbo.users.userid =dbo.TRCUsers.UserID INNER JOINdbo.billing ON dbo.users.userid =dbo.billing.userid ON dbo.projectsphone.projectid =dbo.billing.projectid ONdbo.projects.projectid = dbo.projectsphone.projectidWHERE (dbo.billing.userid 0)ORDER BY dbo.billing.startdateI don't have acess to the tables, but the fields in the view comethrough as the following data types:WinsID - varchar(10)Initials - varchar(30)startdate - long integer (seconds since 1970-01-01 00:00:00)enddate - long integer (seconds since 1970-01-01 00:00:00)duration - long integer (enddate - startdate)ProjID10 - varchar(15)interactionid - varchar(255) (the identifier for this phone call)MS Access SQL statement for qryTelephonyData (based on the view,w_HR_Call_Log):SELECT dbo_w_HR_Call_Log.WinsID, dbo_w_HR_Call_Log.ProjID10,FORMAT(CDATE(DATEADD('s',startdate-(5*60*60),'01-01-197000:00:00')),"yyyy-mm-dd") AS HoursDate,CDATE(DATEADD('s',startdate-(5*60*60),'01-01-1970 00:00:00')) ASStartDT,CDATE(DATEADD('s',enddate-(5*60*60),'01-01-1970 00:00:00')) AS EndDT,DatePart('w',[StartDT]) AS StartDTDayOfWeek, Duration,IIf(StartDTDayOfWeek=1 Or StartDTDayOfWeek=7,Duration,0) ASWeekendSeconds,FROM dbo_w_HR_Call_LogWHERE WinsID<>'0'
I have a fairly complex report that was given to me that was hard coded for single parameters. There is a dropdown for each market (created from a query in SSRS). The users have to run for each market each week.
Is there a way to use this report as a Sub-report inside a list of a master report and then use a mult-value parameter?
I want this multi-value parameter to build the values for the list and then run the "sub-report" for each value.
i just clicked on Advanced mode in Column Group, and then in Row Group Side i set Fixed Data=true for first top static. I'm using local report not server report and i'm displaying that local report in Reportviewer. Now also its not working....
I just installed a fresh lab machine with WSS 3.0 and SQL 2005 SP1. I registered the RS web parts.
In the home page I added the Reports Explorer and the Report viewer web parts. I set up the Reports Explorer and the list of reports are showed.
When I connect the Report Viewer Web part to get report from the Report Explorer web part I get the maintenance WSS page. I have to delete the Report Viewer web part to have the page working again.
If I use only the Reports Viewer with a report (not connected to Reports Explorer) is working just fine.
Any ideas what could be the problem? Any hints on how to investigate this is also much appreciated.
From SQL Server, how to generate a text document which can be read in StarOffice Writer ?? SQL Server may call another application to do it, but how ? I have no clue -- please help.
Note: The text document should NOT be an MS Word document.
In always on under availability group server name properties can see the option Readable Secondary. In that for secondary server the Readable Secondary Option is YES and for Primary it is Read-Intent. I believe Read-Intent allows only read only connections and YES allows all user connections.
In always on under availability group server name properties can see the option Readable Secondary. In that for secondary server the Readable Secondary Option is YES and for Primary it is Read-Intent. I believe Read-Intent allows only read only connections and YES allows all user connections.
What exactly it means for the primary and secondary?
I have been working with a BI colleague to access the readable secondary through SSRS. For some reason it keeps complaining that ApplicationIntent is not recognized keyword. I am starting to think it's something to do with the driver for SSRS.
I have a table that contains the following two columns:BITS (image(16))BIT_LENGTH (int(4))When I look at the table, I see "OLE Object" in the BITS column. Whatsyntax should I use in a SELECT statement to convert the binary imageinfo contained in "BITS" into simple text that I can read? What roledoes the BIT_LENGTH field play?
Hello,I am receiving a text file that is produced from a mainframe that isout of my control. I am attempting to find a (hopefully clean) way toimport it into a SQL Server database in an automated fashion. I amnot really concerned about how many tables it requires or what theschema looks like as long as the data remains related and ends up inits respective fields (I will probably use scratch tables for this).The data is given to me in a format that is meant to be printed outand read by human eyes (in a text file). The format looks somethinglike this:Begin File:-------------------------------------------------------------------------------1234 1234 1234 1234 XYZ Company 01/01/2003.......More stuff related to XYZ company for a couple of lines ..............(this stuff can easily be parsed by position).......MCARD VISA AMEX DISC-------------------------------------------------------------------------------TOTAL 11111.11 4444.44 5555.55 30.01TRANS FEE .20 .20 .15 .15TRANS AMOUNT 2222.22 888.89 833.33 4.50DISC .0165 .0165 .0365 .0355-------------------------------------------------------------------------------ANOTHER HEADER............More stuff related to XYZ Company................End File:Well, this isn't the exact format, but just an example. The point isthat all of the data in each column is related and should end up inthe same record which is related to the parent record of XYZ Company(or all in a single record in a single table if that is the closest Ican get).Also, the rows are not always present. For example, if TRANS FEEdoesn't apply to anything in the row, then the entire row willcollapse and TRANS AMOUNT would be the next line after TOTAL.I was looking at the bcp utility and dts, but dts doesn't seem to havethe performance capabilities (or reliability for that matter) I amlooking for. Bcp seems like it might work if there is some advancedformatting commands that I can't find in the documentation - Anyone?The best I can come up with is to use a high level language such as C#or VB.NET to parse the text file into another text file that is commadelimited, and then use the bcp utility (or bulk insert) to import itinto SQL Server where I can then use TSQL to manipulate it how I want.I am trying to eliminate the high level language parse and just gostraight from file to database. Does anybody know an easier route?TIA
Im developing a program where i would like to export to excel. I found the report function, but cant get it to work Im developing in VB.net and in a form i would like to have this form.
I have a dataset with some fields. I add the fiels into a table. It works but it only show the first record. Not the secound one. It dont give me the oppertunity to step forward or backward.
I if i could i would like all the posts in the database to be show in the same report for exampel
Firstname Lastname John Mcgreen Daniel Johnsson George Anderson
Right now only the first person shows in the report.
I am using Visual Studio 2005 to create a report from a OLAP cube.
I am building a drop down list for user to select the desired branch. My mdx query as follow:
with member [Measures].[ParameterCaption] AS '[Company].[Branch].Currentmember.Member_Caption' member [Measures].[ParameterValue] AS '[Company].[Branch].Currentmember.Uniquename' select {[Measures].[ParameterCaption], [Measures].[ParameterValue]} on columns, {[Company].[Branch].ALLMEMBERS} on rows from [Profit And Loss]
I would like to add a blank row in the result set, such that I can consider that as selecting ALL Branch
When I'm building a report in report designer and get error message that says --error like --field textbox25--whats the easiest way to see all my report fields and quickly access them instead of clicking every field in a report?
To maximize the number of names and phone numbers we can fit on a page, we'd like to have three or four columns of LastName, FirstName, Number on each page. The first column starts with the A's and goes down until the bottom of the page then goes back up to the top of the page in the second column. When the maximum number of columns (probably 3 or 4) is reached for one page, it starts again in the first column of the second page.
I can use Report Builder on my server. However, when am on the client machine (logged in as myself with Admin rights) I see the Report Builder button. I click it and nothing happens. I do have the 2.0 .NET framework install on the client machine.
When I move the mouse over the button it displays the ReportServer/ReportBuilder/ReportBuilder.application on the status bar at the bottom of the window.
I've tried setting the security on the server, but I've had some problems understanding exactly what I need to set and where. For example, in this http://msdn2.microsoft.com/en-us/library/ms365173.aspx link it says, "1. Create a role assignment under Home that includes the Report Builder role. An item-level role assignment is necessary for granting access to report models."
Where exactly is Home? Is it the directory, is on the Report Manager? Do I set these role assignments on the directories in IIS? I've tried a bunch of different things, but I feel like I am grasping around in the dark.
On the server, I clicked the "Enable My Reports to support user-owned folders for publishing..." and I can see that on the client machine, but that is all I've been able to accomplish.
I've seen other posts about this, but I haven't been able to nail down this issue.
I am working on a Actuals vs Budget report which needs drillthrough capability. Right now the reports are not deployed, I am working on them in Visual Studio 2005.
My main report has a text box with the Navigation tab set to Jump to report: DrillThrough1025. I have set all the parameters to pass through to the drill through report.
When I preview my main report and click on the drillthrough textbox, the DrillThrough1025 Report opens, but it opens with the parameter bar at the top, waiting for the parameters to be filled in.
Am I making a basic newbie error somewhere?
Any ideas, references, or resources would be greatly appreciated.
Is this a known issue? When I try to filter my report using Like operator on one of the Report parameters/dataset field it returns nothing. If I use = it works? Any ideas how to use the "Like" operator in reporting?
I am trying to report against a cube and I want the user to be able to choose the date for the report.
Now the cube dimension has been built against a calendar which contains values for the next 30 years(!) so when I create a parameterized report the list of dates is ridiculously huge.
I want to filter the dates out and show only the dates for which there is data. How do I filter out the list of dates for a parameter?
