Get Timezone Specific Date
Aug 11, 2006
Hello,
I am struggling with one algo i.e. I want to retrieve the date according to time zone
I have table called TIMEZONe in which i have the information about the hours difference (+12 to -12) from GMT...
now my scenario is that I want to get the date, using information from timezone area table (time difference from GMT), of any particluar time zone
can any one tell me, how will I able to achieve this task.
for example:
it 4:00 AM in the mornign in GMT TIME and date is 11-08-2006 but in US it 11:00 PM and date is 10-08-2006
Note: Server date is set to GMT (System date)
regards,
Anas
View 5 Replies
ADVERTISEMENT
Feb 23, 2004
Hi,
I have a requirement for a function which would convert a given date with a present timezone to a new timezone.
For eg : the function would be called lets say TZ
then I can issue the following select statement to get the new timezone
select getdate(), TZ(getdate(), PST, EST)
where PST is the current timezone and EST is the new timezone.
I know that ORACLE has a built in function to do this. Am just wondering if theres some function that I can use to accomplish the task.
Thanks
-soumil
View 3 Replies
View Related
Nov 17, 2015
In C#, I can convert UTC time to a specific timezone using:
TimeZoneInfo localTimeZone = TimeZoneInfo.FindSystemTimeZoneById("Pacific Standard Time");
DateTime UTCTime = TimeZoneInfo.ConvertTimeToUtc(localTime, localTimeZone);
Is there any equivalent function in T-SQL (SQL Server 2014 / SQL Azure)?
Specifically, I want to be able to convert a time into UTC before inserting it into a table. Right now I am doing:
INSERT INTO Incident (IncidentDescription, dtOccurred)
VALUES (@IncidentDescription, DATEADD(hour, 8, @dtOccurred))
I don't want to hardcode "8" and I want it to adjust for daylight savings time (DST).Â
Is there any concise solution that does not require me to define SQL functions or have lookup tables? I also don't want to use the difference between GETDATE() and SYSUTCDATETIME(), because the timezone of my server is not my local timezone.
View 5 Replies
View Related
Aug 11, 2006
Hello,
I am struggling with one algo i.e. I want to retrieve the date according to time zone
I have table called TIMEZONe in which i have the information about the hours difference (+12 to -12) from GMT...
now my scenario is that I want to get the date, using information from timezone area table (time difference from GMT), of any particluar time zone
can any one tell me, how will I able to achieve this task.
for example:
it 4:00 AM in the mornign in GMT TIME and date is 11-08-2006 but in US it 11:00 PM and date is 10-08-2006
Note: Server date is set to GMT (System date)
regards,
Anas
View 1 Replies
View Related
Jun 20, 2006
i want to limit the data being stored in a table to the past 6 months only.
data in the table is refreshed each night.
how do i do this without hard coding a date?
View 3 Replies
View Related
Apr 16, 2008
Hi all
How do i set a specific between date in here
i want to add this line or How do i set specific between date
WHERE between '06-06-2005' And '04-01-2007'
SELECT * FROM gradeaverage
WHERE Name='student'
ORDER BY Date
Thank advance
View 9 Replies
View Related
Mar 28, 2008
Can i able to find what time zone that the os has been set,
using some sql function
or is it better to use an sql script
like calculating the difference between GetUtcDate() and GetDate()
View 15 Replies
View Related
Jul 23, 2005
In MS SQL 2000, I would like to obtain the timezone offset from UTC fora given date. For today's date, I can doDATEDIFF(ss,GETDATE(),GETUTCDATE()). However, the offset for a futuredate may not be the same as today because some countries go in DaylightSaving mode. Can you suggest a way to obtain the timezone offset forany given date?ThanksYash
View 3 Replies
View Related
Jul 8, 2014
from getdate(), how can i get today's date with specific time :
For example : (i just need specific 11oclock today)
2014-07-08 11:00:00.000
This do the trick :
select DATEADD( HH, 11, CAST(CAST(DATEADD(DAY,-1,GETDATE()) AS INT) AS DATETIME))
But at second half of the day it changed from 2014-07-08 11:00:00.000 to the next day, i dont know why who controls the past controls the future, who controls the present controls the past. ¯(º_o)/¯ ~~~
View 1 Replies
View Related
Mar 2, 2015
I know how to calculate age from DOB using the current date, but how do I do it if I want to say show me the age as of Jan 1, 2015. Where the DOB is short date looks like:
1946-04-13
View 3 Replies
View Related
Aug 23, 2006
Does the SQL Server equivalent of the ANSI SQL data type DATETIME (TIMESTAMP, if I'm not mistaken) have the notion of time zone? In a project, I store a complex timestamp, composed of a DATETIME field and a FLOAT type, which gives me a sub-microsecond resolution for thousands of years (all right, it's a bit of an overkill but not by much). I use both plain SQL commands and ADO.Net to store the data. It wasn't until I hit a violation of a constraint that I discovered that, at least the way I am doing it, SQL has no concept of time zones: when I wrote a value executing a SQL INSERT (and providing the DATETIME as a string, like this: '8/23/2006 12:43:09 PM') and then when I tried to store the same thing using the ADO.Net SqlAdapter->Update(), it said it was not the same value! Well, it turns out my object was set to be local time, while when parsing it off of a string the kind is "unspecified". The funny thing is that it appears as though just before writing to the SQL Server, the ADO.Net methods do a conversion to local but it ultimately seems to be keeping it as UTC because only then my DateTime values would be different. I can live with that but if I'm missing something and I have the ability to store the time zone as well, I'd like to do that.
Kamen
View 4 Replies
View Related
May 18, 2007
Dear all
I am pretty new to SQL server 2005 and have the following issue:
I get the date from the asp applciation in format dd/mm/yyyy and then try to do a search for all records that might match that date in sql server 2005. The date is storred in ther database in datetime format.
I am having trouble composing the stored procedure to do that.
Any help would be apreciated.
Sincerely
d
View 2 Replies
View Related
Mar 7, 2008
How would i find the 3rd date in a sequence of dates, that is ordered?
Example
Date1 = 08-01-01
Date2 = 08-02-01
Date3 = 08-03-01
Date4 = 08-04-01
i need to retrieve Date3
View 4 Replies
View Related
Apr 10, 2008
I'm trying to find a way to count the number of times a ContentFile, appears in a ContentLog, for a specified period of time.
SELECT DISTINCT ContentFile FROM ContentLog
Shows a list the list of content files.
I'm not sure though how to count for a specific ContentFile, or how to count for on a specific date range.
Thanks for any help you can give.
View 6 Replies
View Related
May 7, 2015
How I can update the following date to get the desired result with specific hour, minute and second
2014-01-01 00:00:00.000
Desired Result
2014-01-01 17:20:20.000
View 4 Replies
View Related
Jan 10, 2008
Hi,
Can anybody tell me to How to get the week number of a specific Date in SQL Server 2005.
Like : say Date "03/01/2008" belongs to the 1st week of the year 2008, same way "21/02/2008" is 8th week of the year 2008.
So, the same way I need to know the week number of a given (variable) date.
I need to write / use a Function in SQL server which will return the Number (INT) (i.e. 1 or 8 or 10 etc...) against a specific (Parameter) date.
regards,
Saibal
Note : Please feel free to write me if my question is not clear.
View 5 Replies
View Related
May 18, 2015
I have a ssis package which runs daily. This ssis package has couple of execute sql tasks which load data for yesterday's transaction. Ex.
INSERT INTO Shipped (Div_Code, shipment_value, ship_l_id, shipped_qty, shipped_date, whse_code,
ord_id, ship_id, ship_l_ord_l_id, Created_date) select ord.DIV_CODE as div_code, ship.SHIPMENT_VALUE as shipment_value, ship_l.SHIP_L_ID as ship_l_id, ship_l.SHIPPED_QTY as shipped_qty, ship.SHIPPED_DATE as shipped_date, ship.WHSE_CODE as whse_code, ord.ORD_ID as ord_id, ship.SHIP_ID as ship_id, ship_l.ord_l_id as ship_l_ord_l_id, Getdate() as Created_date from SHIP ship, ORD ord, SHIP_L ship_l where ship.SHIPPED_DATE=(dateadd(day, -1, CONVERT(VARCHAR(10),GETDATE(),120))) and ship.WHSE_CODE='WPP' and ord.ORD_ID=ship.ORD_ID and ship.SHIP_ID=ship_l.SHIP_ID
All execute sql task has query like above query. and in some query we have date filter which loads data for yesterday. Ex. one query has ship.SHIPPED_DATE=(dateadd(day, -1, CONVERT(VARCHAR(10),GETDATE(),120))). some other query has ord.trans_date=(dateadd(day, -1, CONVERT(VARCHAR(10),GETDATE(),120))). this package runs daily through sql server job, so It loads data for yesterday. Now If i want to run for any particular date, How could we achieve from ssis?
View 3 Replies
View Related
May 31, 2015
I have a ssis package, which runs on date parameter. If we dont specify the date it always load data for yesterday's date. And if we give any specific date like '2015-05-10', It should load for that date. How can we achieve this dynamically (using package configuration)? Once we load for any specific date, package should be set for yesterday's date dynamically. How to achieve this as I am new to SSIS.
View 2 Replies
View Related
Jul 13, 2015
I would like to know about the DML process (Insert/update /delete) in a particular table .. it is like change tracking but I also want to know the modification date
I know CDC ( Change data capture ) but unfortunately it needs SQL 2008 developer/enterprise edition and my SQL server is SQL 2008 STANDARD edition.
View 5 Replies
View Related
Nov 18, 2015
I have a table with all my orders lines, I need to identify (DAX formula) for a specific customer which is the first order of a specific article (first date filtered for customer and article) and use this information to tag the order line for that article for the specific customer as "Newly Ordered article" if the order date = first order date or as "Reordered article" if the date on the specific order line is subsequent to the first order date.
I imagine I need to combine a Lookup date filtered for customer and article and use it with a IF formula.
Similar to this I would also like to define that if the first order for a product for the specific custumer is older then a certain date, then this would be defined as and historical customer for the specific article, if the first order on the article is more recent the a specific date, then this will be defined as "new customer for that article".
View 2 Replies
View Related
May 10, 2007
I have a few flat files that I need to read a date from. The date will always be on Line No 4 and will be in YYYYMMDD string format in chars 2-9 of line 4
Here's what I have so far to convert the string YYYYMMDD into date format... I don't know enough VB to be able to just hit Line 4... I am sure it's simple so could someone pelase put me out of my googling misery
Code Snippet
Public Sub Main()
'
Dim oStream As New IO.StreamReader("Z:TreasuryFilesdeals.dat")
Dim strReadLine As String, filedate As Date
'??? how to just read a date from the fourth line of the file ??
'strReadLine = oStream.ReadLine()
strReadLine = "A20050331" 'sample string variable
'convert the fourth line of the flat file to a date format
filedate = New DateTime( _
CInt(Strings.Mid(strReadLine, 2, 4)), _
CInt(Strings.Mid(strReadLine, 6, 2)), _
CInt(Strings.Mid(strReadLine, 8, 2)))
'write filedate to package variable
Dts.Variables.Item("User::Load_Date_Loan").Value = filedate
System.Windows.Forms.MessageBox.Show(CStr(Dts.Variables.Item("User::Load_Date_Loan").Value))
'
Dts.TaskResult = Dts.Results.Success
End Sub
View 4 Replies
View Related
Dec 21, 2012
I have a sales order table that has customer, sales, product and sales date. Â I am looking to return the first sales date by customer for a specific product.
SalesTable:
Customer
Product
Sales Date
Sales
First Bike Date
Jon
Bike
12/4/2011
 $10.00
[Code] ....
I would like to return the date of the first bike purchase date by each customer and repeat that date for each row and customer. Â Can I use function to complete? Â I have a datedim table as well related to the sales date.
View 3 Replies
View Related
Jul 8, 2015
In the typical Job Cost Reporting world you can easily create SQL Views / Stored Procedures (or create a report) that can return both Job To Date values along with period values for another date range. Something like this:
Job,
Phase of Work,
Cost Type,
UM,
Budgeted Cost,
Budgeted Quantity,
Period Cost,
Period Quantity,
Period Unit Cost,
JTD Cost,
JTD Quanity,
JTD Unit Cost,
Variance between JTD and Period Cost,
Variance between JTD and Period Quantity,
Variance between JTD and Period Unit Cost
But in the tabular BI world I am not certain how to have these values show up in a pivot table or BI visualization. My current Fact table is essentially every job cost transaction so it is at the most granular level holding Company, Job, Phase of Work, UM, Cost Type, Date, Budget Cost, Budget Quantity, Actual Cost, Actual Quantity. The Budget values only have a value if the entry was updating the budget and the Actual values hold actual cost for each transaction. If you don't restrict by date you have your Budgeted Quantity / Cost and Job To date Cost / Quantity.
I can generate a Pivot table or chart and not restrict by date and I can get all the Budget Totals and the Job To Date Totals when I have the Company, Job, Phase Of Work, Cost Type.
But what if I want to look at a range like last quarter or yesterday or last week. I can indeed filter that data in Pivot Table and get the period values, but now I don't know how to have the Job To Date values show up for comparison purposes.
I am guessing maybe a DAX formula (if using Excel Powerpivot or SQL Tabular Model), but I am at a loss.
So in the BI world how do you get Job To Date totals while also viewing the data for a period of time?
Here are some example graphs we would want to show for a single Job. Let's say we want to show the 10 worst performing cost distributions.Â
I would want a graph to show the cost distribution and for each cost distribution it would show Budgeted Cost, Period Cost, Job To Date Cost.I would want a graph to show the cost distribution and for each cost distribution it would show Budgeted Unit / Cost, Period Unit / Cost, Job To Date Unit / Cost.I would want a graph to show the cost distribution and the variance between JTD and Budget and Period and Budget.
As you can see it all stems around seeing JTD and Budget values vs Period Values. Here is a visualization that may work. I am using PivotTable filtered on one Company, Job, Phase of Work. I can see the sum of actual cost which is the totals for the date range I provided. But I still want to see the JTD totals for that Phase of Work and Cost Types and actually the Budget Totals as that is sort of a JTD, but for budget... especially if I want to compare Budget vs JTD vs Actual.
View 8 Replies
View Related
Jul 29, 2015
I want to delete all backup files from a folder older than a specific date. But if I use the beklow query, I need to pass how many days of older backup files I need to delete whereas in my case, I dont know how many days/month/syears of old backup files are there in the backup folder.
EXEC xp_cmdshell 'FORFILES /p c:BACKUP /s /m *.sql /d -30 /c "CMD /C del /Q /F @FILE"'
View 2 Replies
View Related
Mar 5, 2015
I have a table which is updated daily using a MERGE statement. As records are insert, updated and deleted, I am saving the OUTPUT from the MERGE statement into a history table with a timestamp and action$ column appended to the record.
Using this history table, I'd like to rebuild the data based on specific past date. I was able to create a stored procedure that inspects each record in the history table and apply it to the data in a temp table. The stored procedure solution uses multiple queries to rebuild the data at a point in time. I was curious if there was an easier and more efficient solution using a table function.
View 2 Replies
View Related
Jun 5, 2012
I'm struggling with trying to display a single vertical stripline at a date value along my x-axis.Â
I'm using the following non-default settings within the stripline editor:
bordercolor = tomato
borderstyle = solid
borderwidth  = 1pt
intervaloffset =Â Fields!uidate.Value.ToOADate()
where uidate is a calculated field in my dataset that always has the value of 05/29/2012  (using formatdatetime("05/29/2012",dateformat.ShortDate))
Everything else is set to Auto, with stripwidth=0
I'm trying to display a single vertical line at the x-axis value of 05/29/2012
I have previously tried setting the interval offset to "05/29/2012" but that didn't work. I've also tried setting the value of a hidden text box on the report to "05/29/2012" and setting the interval offset to the value of that text box, but that gave me a "text box not declared" error.
How I can simply display a vertical stripline on my line graph at the x-axis value of 05/29/2012 ?
View 2 Replies
View Related
May 23, 2015
I need to select specific values from all rows where the value of a specific column is "Active"
This part works: SELECT LastName, FirstName, MiddleInit, ClientId FROM dbo.Client
But I want to add: WHERE StatusType = (Active) and how to do this.
View 4 Replies
View Related
Jun 30, 2015
We have a "main" SQL 2014 server who imports XML files using SSIS in a datacenter. In remote sites (which are warehouses), there is an instance of SQL 2014 Express. A merge replication is setup, as every operations done on each site must be "forwared" to the main database, as some XML files are generated as output for an ERP system.
Now, the merge replication replicate all the data to the server on each sites. But a specific site don't need the data of every other sites, only the data relevant to itself (which is the warehouse code). Is there a way to replicate only the data relevant to each individual sites to the subscribers? Or is there a better way than replication to accomplish this?
View 2 Replies
View Related
Oct 10, 2007
I want to ship 500,000 aged transactions each night to an archive table and delete them from their source table in one or more logical units of work (LUW). Each row is approx 60 bytes and there is only one non clustered index on the source table presently.
I'm trying to weigh the pros and cons of 3 alternatives. One of them would basically insert the non-aged rows into tempdb, ship the aged records, truncate the table and then insert the tempdb records back into their source all in the same LUW.
For this alternative, I'd at least like to turn off logging when the records get inserted into tempdb as I dont see any value in logging that part of the activity. Is this possible?
View 4 Replies
View Related
Jan 23, 2007
Hi All,
Could you guys please help me with printing reports invoked thru command line/ URL access to print automatically to specific printers and specific trays and also is it possible to set the specific printer and tray as parameters.
Any suggestions is appreciated
Thanks A lot in advance
e,g :
http://localhost/reportserver?/testreports/employee sales&UserID='ABC'&LName=Lastname='victor'&rs:Command=Render
View 1 Replies
View Related
Mar 27, 2007
Hi there !
Thanks for taking the time to read this thread.
I don't know whether anyone has this problem, but I am definitely not using the right keywords to search for a thread.
My situation is this...
I have a dataset that has values to fill cells to multiple tables in a report.
However, I only want to select specific data from the dataset to fill textboxes and others.
I cannot change the stored procedure, but the sample of the data is shown below:-
Row Stat Val
0 dtRpt1 02/01/2005
1 Value1 1
2 Value2 2000
3 dtMailSent 02/28/2005
4 Value3 0
5 Value4 5
6 Value5 658
I know it looks weird, but the row really represents which "row" or textbox is it to fill with the Val. The Stat Column is just a way to make sure that I am filling the right values.
so my new report would have multiple tables to denote different categories.
In my first table, I tried putting the cells as follows:-
(expressions are highlighted in italics and bold)
TextBox1 =IIF(Fields!Row.Value =0, Fields!Val.Value,"")
Table1
Column1
DetailRow1 =IIF(Fields!Row.Value =1, Fields!Val.Value,"")
DetailRow2 =IIF(Fields!Row.Value =2, Fields!Val.Value,"")
Table2
Column1
DetailRow1 =IIF(Fields!Row.Value =3, Fields!Val.Value,"")
DetailRow2 =IIF(Fields!Row.Value =4, Fields!Val.Value,"")
DetailRow3 =IIF(Fields!Row.Value =5, Fields!Val.Value,"")
DetailRow4 =IIF(Fields!Row.Value =6, Fields!Val.Value,"")
I only expect this report to print out one page holding the previous values.
However, it ended up printing like this
----------------------------------------------------------
Table1
Column1
DetailRow1 1
DetailRow2
Column1
DetailRow1
DetailRow2 2000
Table2
Column1
DetailRow1 02/28/2005
DetailRow2
DetailRow3
DetailRow4
Table2
Column1
DetailRow1
DetailRow2 0
DetailRow3
DetailRow4
Table2
Column1
DetailRow1
DetailRow2
DetailRow3 5
DetailRow4
Table2
Column1
DetailRow1
DetailRow2
DetailRow3
DetailRow4 658
------------------------------------------------------
I tried putting it into the headerrows instead of DetailRows, and it ended up printing the last value.
Is there anyway to do this ? print all the values out in one table ? I tried using textboxes, but I think I got my expression wrong.
Is this the correct expression ?
=IIF((Fields!Row.Value,"Dataset") =1, (Fields!Val.value, "Dataset"), "")
and it give me an error
The value expression for the textbox €˜textbox5€™ contains an error: [BC30455] Argument not specified for parameter 'FalsePart' of 'Public Function IIf(Expression As Boolean, TruePart As Object, FalsePart As Object) As Object'.
Appreciate any advice or suggestion for this scenario !
Thanks!
Bernard
View 3 Replies
View Related
Mar 21, 2008
I am very early on in developing a website to track issues with projects which is tied to a SQL database. I have my Projects Table, my Users Table, and am creating a third table to track issues. I'm wondering what is the best way to assign specific users to specific data/projects. The user should only be able to view & update the projects assigned to him. He should not be able to see other projects. What is the best way to assign projects/data to the users to make sure they are only viewing their data?
View 1 Replies
View Related
Sep 21, 2006
HiI am using SQL 2005, VB 2005I am trying to insert a record using parameters using the following code as per MotLey suggestion and it works finestring insertSQL; insertSQL = "INSERT INTO Issue(ProjectID, TypeofEntryID, PriorityID ,Title, Area) VALUES (@ProjectID, @TypeofEntryID, @PriorityID ,@Title, @Area)"; cmdInsert SqlCommand; cmdInsert=new SqlCommand(insertSQL,conn); cmdInsert.Parameters.Add("@ProjectID",SqlDbType.Varchar).Value=ProjectID.Text; My query is how to detail with dates my previous code wasinsertSQL += "convert(datetime,'" + DateTime.Now.ToString("dd/MM/yy") + "',3), '";I tried the code below but the record doesn't save?string date = DateTime.Now.ToString("dd/MM/yy"); insertSQL = "INSERT INTO WorkFlow(IssueID, TaskID, TaskDone, Date ,StaffID) VALUES (@IDIssue, @IDTask, @TaskDone, convert(DateTime,@Date,3),@IDStaff)"; cmdInsert.Parameters.Add("IDIssue", SqlDbType.Int).Value = IDIssue.ToString();cmdInsert.Parameters.Add("IDTask",SqlDbType.Int).Value = IDTask.Text;cmdInsert.Parameters.Add("TaskDone",SqlDbType.VarChar).Value = TaskDoneTxtbox.Text;cmdInsert.Parameters.Add("Date",SqlDbType.DateTime).Value = date;cmdInsert.Parameters.Add("IDStaff",SqlDbType.Int).Value = IDStaff.Text;Could someone point to me in the right direction?Thanks in advance
View 3 Replies
View Related
