Get @@trancount For All Users/ Connections URGENT
Sep 26, 2007
Hi all,
Is there any way to get the @@trancount for a connection from outside the connection?
The reason i'm asking is that a customer just lost a days work, and there is nothing in any table from a certain time onward. One theoy is that a backup was restored, but we checked and that is not the case.
So another theory is that a certain sproc began a transaction, but never finished because of an error. (We had some strange timeouts as well, so this is quite plausible.)
So the question: Can i get a list of current connections with their trancount? I could just run this to see if a certain connection would never get back to zero to check the transaction theory.
Thanks in advance,
Gert-Jan
View 7 Replies
ADVERTISEMENT
Mar 6, 2004
Hello,
I need to attach and detach 50 DB's, for which I have wrote a simple script. How can I make sure that there are no connections or users connected to the DB's, if there any users how can I forcefully disconnect them.
Thanks
Dakki
View 7 Replies
View Related
Mar 30, 2001
Hi,
could somebody please let me know what is the maximum number of simultaneous users/connection per single SQL Server 7.0 box? Licenses are not the issue here, rather the number of physical connections supported before another server needs to be purchased.
Another variation of this question would be what's the highest number of databases that 7can be created on SQL 7.0 server and what is the highest number of physical connections supported per database? Again, licenses are not the issue. Thanks a lot in advance.
View 2 Replies
View Related
May 3, 2008
basically, is it inefficient to open and close a data connection everytime data needs to be retrieved or is there a way for a user to use the same conenction over multiple pages orfor multiple users to share one global data connection I just wanted to know this before I built a site where data could be constantly being pulled or put into the database.It would be easier to just keep opening and closing the connection since it just means pasting in the small chunk of code I use to do that where I need it. I hear speak of connections sometimes not closing etc and wonder if that is an issue then if you are opening and closing too many of them. I am using SqlConnection SqlCommand and SqlDatareader , my code works, just wondering if my approach lacked scalability before I find out too late and have to rewrite everything . Jim
View 11 Replies
View Related
Oct 27, 2000
I have inadvertantly set the connections tab to 1. Which essentially means 0 users can connect because Enterprise Manager reserves this 1 connection for itself. Does anyone know of a way to change this back. Right now i am unable to get into the DB through EM/ query analyzer/etc.
View 1 Replies
View Related
Jun 28, 2007
Take a look a the sql code below. Can anyone explain why @@trancount increased to 2 after the 2nd print statement?
SET ANSI_DEFAULTS ON
GO
PRINT @@TRANCOUNT
GO
BEGIN TRANSACTION
PRINT @@TRANCOUNT
GO
Here is the output I got
0
2
View 1 Replies
View Related
Sep 22, 2007
Hi, I've been trying all day to make connections to SQL server 2005 express work. I have gone throgh the setup of tcp/ip, firewall exceptions, and anything else possible. My problem is that after i have gone through the microsoft support pages.
I can connect to SQL server in VS2005 but i can connect and make changes to databases with SQL Server Management Studio. In VS2005 i try to connect and i get the error System.Data.SqlClient.SqlException
Message="An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Shared Memory Provider, error: 40 - Could not open a connection to SQL Server)"
I have to write a program by the end of the week and cannot proceed without SQL Server working proerly. Any replies would be apreciated as i am so fustrated with this problem. I have included the full error stack below if it is required. Contact me for any more details
Regards
Matt
System.Data.SqlClient.SqlException was unhandled
Class=20
ErrorCode=-2146232060
LineNumber=0
Message="An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Shared Memory Provider, error: 40 - Could not open a connection to SQL Server)"
Number=2
Server=""
Source=".Net SqlClient Data Provider"
State=0
StackTrace:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable dataTable)
at Tour_Operator.DataSet1TableAdapters.ToursTableAdapter.Fill(ToursDataTable dataTable) in C:Documents and SettingsMattyMy DocumentsVisual Studio 2005ProjectsComputermat-ITTour OperatorPrintDataSet1.Designer.vb:line 1332
at Tour_Operator.main.main_Load(Object sender, EventArgs e) in C:Documents and SettingsMattyMy DocumentsVisual Studio 2005ProjectsComputermat-ITTour Operatormain.vb:line 18
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.SafeNativeMethods.ShowWindow(HandleRef hWnd, Int32 nCmdShow)
at System.Windows.Forms.Control.SetVisibleCore(Boolean value)
at System.Windows.Forms.Form.SetVisibleCore(Boolean value)
at System.Windows.Forms.Control.set_Visible(Boolean value)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(ApplicationContext context)
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)
at Tour_Operator.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 81
at System.AppDomain.nExecuteAssembly(Assembly assembly, String[] args)
at System.Runtime.Hosting.ManifestRunner.Run(Boolean checkAptModel)
at System.Runtime.Hosting.ManifestRunner.ExecuteAsAssembly()
at System.Runtime.Hosting.ApplicationActivator.CreateInstance(ActivationContext activationContext, String[] activationCustomData)
at System.Runtime.Hosting.ApplicationActivator.CreateInstance(ActivationContext activationContext)
at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssemblyDebugInZone()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
View 5 Replies
View Related
Apr 12, 2001
i need to change the object owner from actuate to dbo
i wrote this script which will give me an execute process which i just need to run on query analyser it works fine for object owner change from dbo to new user but gives an error saying the object does not exist when i want to change it from user actuate to dbo...can some one correct me in this regard..here is the script.
Select "Exec sp_changeobjectowner", + name + ",dbo"
From sysobjects
Where type = "P" and
uid = 6 order by name
uid i found from sysusers table
it gives me some thing like this
Result : Exec sp_changeobjectowner MonthlyPerformanceSummary_Occupancy,dbo
This works the other way around
Exec sp_changeobjectowner MonthlyPerformanceSummary_Occupancy,kavitha
error: object does not exist
And the other issue is i have certain stored procedures for which i need to give permission exec for a specific user, i did create the user...what shold i do to grant exec privilage to this user..for all the stored procedures at a time finding the stored procedure name.
its like this the name always starts with sp_actuate...does this help in finding the stored procedure and then granting the exec privilage.
Thanks a lot in advance.
Kavitha
View 1 Replies
View Related
Aug 14, 2001
Hi ,
I have a bunch of Users about 150 of them. I think they can't even run a SELECT .
When they try to run a select they get error messages :
"SELECT permission denied on object 'Object name', database 'Db_name', owner 'dbo'."
I have check out every thing !! All these Users are the members of public role on the database !!
They work fine on other Db's with the same settings !!
Not Sure what to do
PLEASE HELPP !!!
View 1 Replies
View Related
Jul 20, 2000
I need to know how many concurrent users are allowed to access the database at any point of time.Will it depend on the type of licence?Where do we set this parameter.Some users are complaining 'time out' problem.Thanks for any help!
View 1 Replies
View Related
Jun 15, 2000
I restored a database from one full backup.The users are missing now in the new databse.When I try to create the same users again it says that they are already existing!Please help what shall I do to restore/recreate the users?Do I need to do anything with the Master?
View 4 Replies
View Related
Apr 28, 2003
Hi,
Reviewing the MSSQL process info screen, I am seeing the same process appear a numer of times. It is always the same, being
'IF @@TRANCOUNT > 0 COMMIT TRAN'
Sometimes, there can be up to a hundred of these processes (listed in the process info screen). They generally have a 'sleeping' status, but nonetheless, I would like to see these processes disappear if they are not being used.
I have checked in all of the stored procedures and triggers in the application, and none have this sql statement.
When I run profiler, I get these entries, but the profiler says they belong to either SQL Enterprise Manager or 'Microsoft Windows 2000 Operating System', and not to the application I am running.
Does anyone know where these transactions come from? Can I prevent these from appearing? If no, what is the impact (other than sql server having to maintain a connection).
Thanks,
Jim
View 6 Replies
View Related
Jul 22, 2002
I made a backup of a production database and copied that backup over to a development server and restored the database. Now I have users saying that the application is failing on development. I have users that have NT authentication and some with SQL authentication.
What is the best way to get everything to sync up again?????
View 1 Replies
View Related
Jul 20, 2005
During testing of an application, i noticed a difference betweenSQL 2000 and SQL 7, both with identical config.In a nutshell:A table has a trigger for UPDATE and DELETE.When a column in the table is UPDATED the following happens:In autocommit mode, when entering a trigger the trancount equals1 for both SQL 7 and 2000.When the same update is performed in an explicit transactionin SQL 7 @@TRANCOUNT equal 2, and in SQL 2000 @@TRANCOUNT equals 1.Configuration is the same and there are no implicit transactions.I don't need a work around as this will invalidate the migrationprocess as both products should behave identically.What would influence the difference or why is there a difference???Is there something which has been overlooked?================================================== =======The following code replicates the problemEnsure implicit transactions are off in both versions at the serverlevel, thus defaulting to autocommitted mode.Ensure sp_configure settings are identical.Step 1: Create a DB called test:Step 2: Execute the following under the context of test DB.if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[trigtest]') and OBJECTPROPERTY(id, Outrigger') = 1)drop trigger [dbo].[trigtest]GOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[test]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)drop table [dbo].[test]GOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[trancount]') and OBJECTPROPERTY(id, N'IsUserTable')= 1)drop table [dbo].[trancount]GOCREATE TABLE [dbo].[test] ([id] [int] IDENTITY (1, 1) NOT NULL ,[text] [char] (10) NULL) ON [PRIMARY]GOCREATE TABLE [dbo].[trancount] ([id] [int] IDENTITY (1, 1) NOT NULL ,[trancount] [int] NOT NULL) ON [PRIMARY]GOCREATE TRIGGER trigtest ON [dbo].[test]FOR UPDATE, DELETEASdeclare @trancount intselect @trancount = @@TRANCOUNTinsert into trancount ( trancount ) values ( @trancount )Step 3: Run the following against the DB, then check trancount table.-- Add a record to the test table (trigger will not fire)insert into test (text) values ( 'xxxx' );go-- Update the value (autocommit mode) to fire trigger-- Under SQL 7 and 2000, trancount table will only indicate 1tranaction open.-- This is being performed in autocommit mode.update test set text = 'test1'go-- Update value using an explicit transaction-- Under SQL 7, trancount will equal 2 in trigger, in SQL 2000trancount equals 1begin transactionupdate test set text = 'test2'commit workgo
View 5 Replies
View Related
Nov 15, 2000
Is there any easy way to move users between SQL Servers for a particular database?
We have tests and development servers I would like to make sure the user lists are in sync for that db.
Thanks
View 1 Replies
View Related
Jul 28, 2015
We have an existing SSRS server, and have just created a new child domain. We'll be migrating users from the parent to the child, and want to add the users of that new domain with access to SSRS. In the parent domain they are able to access, but after migration with the child domain account, they cannot.
I have added the group CHILDDomain Users with a system user role on SSRS, and PARENTDomain Users was already there.
Is there any additional step I should/could take to get this active?
View 5 Replies
View Related
Mar 6, 2008
I have had this issue just pop up. I have local users who can connect fine, but my users that require connection by VPN cannot connect. I get the server not available or access denied error. I did confirm that the VPN'ers are connected to the network correctly and can see that their shares and mappings are correct. Any ideas? Thanking you all in advance!!
View 6 Replies
View Related
Sep 28, 2015
I am trying to revert back to Windows 7 after upgrading to Windows 10, however it will not let me and the following message occurs: "Remove new accounts.Before you can go back to a previous version of Windows, you'll need to remove any user accounts you added after the most recent upgrade. The accounts need to be completely removed, including their profiles.You created one account (NT SERVICEMSSQLSERVER) Go to Settings> Accounts> Other users to remove these accounts and then try again".However I did not create any new users and there are no other users listed in the Accounts section.
View 2 Replies
View Related
Apr 30, 2008
hi alli've got two tables called "webusers" (id, name, fk_country) and "countries" (id, name)
at the meantime, i've a search-page where i can fill a form to search users. in the dropdown to select the country i included an option which is called "all countries".
now the problem is: how can i make a stored procedure that makes a restriction to the fk_country depending on the submitted fk_country parameter?it should be something like
SELECT * FROM webusers(if @fk_country > 0, which is the value for "all countries"){ WHERE fk_country = @fk_country}
who has an idea how to solve this problem?
View 9 Replies
View Related
Nov 28, 2006
Hi Team,
In SQL Enterprise Manager, when we expand "Database -->Users", we see the
users there. When we expand "Security --> logins" we see the same users there.
Can you differentiate these two.
Thanks
Santhosh
View 1 Replies
View Related
May 17, 2005
Hi there,
Here we have got a
asp.net application that was developed when database was
sitting on SQL server 6.5. Now client has moved all of their databases
to SQL server 2000. When the database was on 6.5 the previous
development team has used oledb connections all over. As the databases
have been moved to SQL server 2000 now i am in process of changing the
database connection part. As part of the process i have a login
authorization code.
Private Function Authenticate(ByVal username As String, ByVal password As String, ByRef results As NorisSetupLib.AuthorizationResult) As Boolean
Dim conn As IDbConnection = GetConnection()
Try
Dim cmd As IDbCommand = conn.CreateCommand()
Dim sql As String = "EDSConfirmUpdate" '"EDSConfirmUpdate""PswdConfirmation"
'Dim cmd As SqlCommand = New SqlCommand("sql", conn)
cmd.CommandText = sql
cmd.CommandType = CommandType.StoredProcedure
NorisHelpers.DBHelpers.AddParam(cmd, "@logon", username)
NorisHelpers.DBHelpers.AddParam(cmd, "@password", password)
conn.Open()
'Get string for return values
Dim ReturnValue As String = cmd.ExecuteScalar.ToString
'Split string into array
Dim Values() As String = ReturnValue.Split(";~".ToCharArray)
'If the return code is CONTINUE, all is well. Otherwise, collect the
'reason why the result failed and let the user know
If Values(0) = "CONTINUE" Then
Return True
Else
results.Result = Values(0)
'Make sure there is a message being returned
If Values.Length > 1 Then
results.Message = Values(2)
End If
Return False
End If
Catch ex As Exception
Throw ex
Finally
If (Not conn Is Nothing AndAlso conn.State = ConnectionState.Open) Then
conn.Close()
End If
End Try
End Function
''' -----------------------------------------------------------------------------
''' <summary>
''' Getting the Connection from the config file
''' </summary>
''' <returns>A connection object</returns>
''' <remarks>
''' This is the same for all of the data classes.
''' Reads a specific
connection string from the web.config file for the service, creates a
connection object and returns it as an IDbConnection.
''' </remarks>
''' -----------------------------------------------------------------------------
Private Function GetConnection() As IDbConnection
'Dim conn As IDbConnection = New System.Data.OleDb.OleDbConnection
Dim conn As IDbConnection = New System.Data.SqlClient.SqlConnection
conn.ConnectionString = NorisHelpers.DBHelpers.GetConnectionString(NorisHelpers.DBHelpers.COMMON)
Return conn
End Function
in the above GetConnection() method i
have commented out the .net dataprovider for oledb and changed it to
.net dataprovider for SQLconnection. this function works fine. But in
the authenticate method above at the line
Dim ReturnValue As String = cmd.ExecuteScalar.ToString
for some reason its throwing the below error.
Run-time exception thrown : System.Data.SqlClient.SqlException - @password is not a parameter for procedure EDSConfirmUpdate.
If i comment out the
Dim conn As IDbConnection = New System.Data.SqlClient.SqlConnection
and uncomment the .net oledb provider,
Dim conn As IDbConnection = New System.Data.OleDb.OleDbConnection
then it works fine.
I also have changed the webconfig file as below.
<!--<add
key="Common" value='User ID=**secret**;pwd=**secret**;Data
Source="ESMALLDB2K";Initial Catalog=cj_common;Auto
Translate=True;Persist Security Info=False;Provider="SQLOLEDB.1";'
/>-->
<add key="Common" value='User ID=**secret**;pwd=**secret**;Data Source="ESMALLDB2K";Initial Catalog=cj_common;' />
Please help. Thanks in advance.
View 4 Replies
View Related
Jun 4, 2008
I want to be able to list all users connected/logged in a specific database and disconnect them all or a certain user.
can this be done in SQL and if so how?
View 1 Replies
View Related
Sep 26, 2007
We are using Navision with SQL server 2003.
What kind of methods is there out there to reduce hwo often this happens?
View 10 Replies
View Related
Sep 27, 2000
This morning I can not connect to our SQL Server 7.0 whatever from client or server. The error message which I list below:
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++
A connection could not be estabished to server--Timeout expired
Please verfy SQL Server is running and check your SQL Server registration properties and try again.
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++
We use windows NT authentication. We did not do any change on NT. The SQL Server daily schedule job usally stoped at 10:00AM, but today from the Window NT Task Manager, we can see that the SQL Server is still running untill now.
Please help!!!
View 3 Replies
View Related
Jul 20, 2005
Just a quick question about connection management. My application willnever need more than 1 or 2 connections about at any given time. Also, I donot expect many users to be connected at any given time. For efficiency, Iwould like to keep connections alive throughout the lifetime of the objectsrequiring them, rather than opening a new connection, executing code andthen closing it again. What is the most efficient way of doing this?Should I perform the open/close or just one open when I create the objectand a close when I dispose of it?
View 1 Replies
View Related
Oct 26, 2000
hi, I have settup up sql mail and did the following:
1. created an E-mail account and configured Out look by creating a pop3 mail profile. tested it by sending and receiving mail, that is ook
2. I Created one domain account for MSsqlserver and Sql Agent service. both services use same account and start automatically in the control panel-services
3. I used the profile that I created in outlook to test the sql mail but got an error:
Error 22030 : A MAPI error ( error number:273) occurred: MapiLogon Ex Failed due to MAPI
Error 273: MAPI Logon Failed
I really do not know what went wrong. I followed the steps from bol and still having a problem. Am I missing something.
I do have a valid email account
I do have a valid domain account
I tested outlook using the email account and it worked. so why sql server does not recognise MAPI.
My next question, How to configure MAPI in Sql server if what I did was wrong.
View 1 Replies
View Related
Mar 23, 2001
Hi, I have 2 windows 2000 server in cluster with sql server 2000 enterprise edition installed.
I have activated the Server-Requested Encryption by using the sql server network utility (Force Protocol Encryption). After this, I have stoped sql server service. But I can't start it at this moment.
The error is:
19015: The encrypton is required but no available certificat has been found.
Please help me to start sql server.
Thanks.
Michel
View 4 Replies
View Related
Jul 6, 2000
Hello,
I am facing a huge problem in my sql server database using access as a front end.The main problem is trying to execute queries "views" ,since they reside on sql server now,and using variables or parameters in reports and forms to filter on this query.
Ex.
how can the following be implemented using the same query but in sql server?
Access
------
SELECT MAT_Charts.YYYYMM
FROM MAT_Charts
WHERE ((([Area_Code] & "-" & [GROUP_CODE])=[Reports]![MAT_Chart_C1].[MAT_Key]))
GROUP BY MAT_Charts.YYYYMM;
It is specifically this statement in which I am interested:
[GROUP_CODE])=[Reports]![MAT_Chart_C1].[MAT_Key]))
Thank you very much for your concern.
View 2 Replies
View Related
Dec 20, 2000
Hi everybody,
I have a batch which needs to be run every day night at 2:00 am.I Using At command but it is not working. if u have idea, please let me know
I AM USING THE FOLLOWING COMMAND :
AT 2:00AM C:SCHED.BAT
Thanks in advance
Krishna
View 3 Replies
View Related
Apr 19, 2008
hi all
its urgent really urgent
please reply soon
I am getting error in sysindexes when i run dbcc checkdb on a production db.
the error is Server: Msg 8928, Level 16, State 1, Line 1
please help me to remove this
all the options of dbcc checkdb as well as table are not helping me
thanks in advance
View 4 Replies
View Related
Dec 27, 2007
Hi I have some simple questions of for MS SQL. Say I have a database with a table Called Company. In this table I have Employee's with these columns(EmployeeID<PK>, FirstName, LastName) Now I am inserting some data like this.EmployeeID FirstName, LastName------------------------------------------------------- 1 Bob Smith2 Joe Mitter Now Say I have this situation(this will look weird for this example but for another examples and the stuff I am working on it make sense). Say I have a new Employee Called Jessica White. Jessica must be the second record. So I need to insert it between the 1st and 2nd record. Like I said I am very noob at doing this stuff so I am not sure how I would do it. I first was going to my table and then went to modify. This brought up a blank grid with all my column names. I then started to add all my data in. I found out later to make my life easier I need to enter in certain spots null rows in it to help with formating(otherwise I would have had to figure out a way to do make null rows with c# code). I then went back to this grid and I tried to add a record before the data just like you if you used excel. I quickly found out you can not do that. This resulted me having to recreate the table and reput the all the data back in(this told me I was doing something very very wrong). I was then thinking of writing it with a query and I been playing around with it and still running into problems like say I had a table called test with a coloum called id<PK> and testss(yes bad names just playing around though).So if I did something like this:INSERT INTO testVALUES(2)INSERT INTO testVALUES(1)SELECT * FROM testNow I am trying to figure out how to insert something between rows 1 and 2. Would I have to drop the table or delete all the data and then run a saved copy of my script with the added change or what?My second question is what is a good site that has examples of all the commands(I don't want to read a book on it I have had a oracle sql course and well it was just boring and I did not learn too much.). I think the best way for me to learn is just continue doing my site and picking it up on the file and when I got a problem read about it and ask on the forums. Thanks
View 11 Replies
View Related
Jul 13, 2001
Very strange event. Installed new machine into NT 4 network, which has a PDC and a BDC. We have copies of all SQL databases on both the PDC and the BDC. I installed SQL 7 on new workstation. Throught Control Panel/ODBC connections I can reach the SQL files on bith the PDC and BDC. Howver when I try to use Enterprise Manager, I can connect to the tables on the PDC, but not the BDC. SQL lists both machines in the server group, but only allows me to access tables on PDC! Here is the Event information that I recived on the BDC:
The computer IVR1 tried to connect to the server NTBACKUPSERVER using the trust relationship established by the MASSCOM domain. However, the computer lost the correct security identifier (SID) when the domain was reconfigured.
How do I fix this?
View 2 Replies
View Related
Apr 14, 2000
HI all,
I have a problem here. I am having two computers both are loaded windows NT 4.0 AND SERVICE PACK 4 AND ALSO I INSTALLED SQL SERVER 7.0.
Now i want to connect those two servers , so pls anyone suggest me how i have to do.I connected both servers thru HUB.
Pls suggest me..
thank u..
--ram
View 1 Replies
View Related
