Getdate() >= Startdate And Getdate() <= Enddate
Oct 4, 2000
Please i need an exmple of ur solution, thanks :)
I'm using some files to show certain pages on certain date for an example
File name : aa.doc
start date: 10/02/00
end date : 10/03/00
But it expires on 10/02/00, here is the strored procedure:
Before the date comes, it expires the page
Here is my stored procedure:
"
SELECT startdate, enddate,archivedate
and (startdate is null or (getdate() >= startdate and getdate() <= enddate))
and (archivedate is null or (getdate() <= archivedate))
group by startdate, enddate order by startdate desc "
Thankx a lot
View 1 Replies
ADVERTISEMENT
Jan 3, 2008
Hi,
If i pass a date(03/01/2008) i need to get the startdate(31/12/2007) and enddate(05/01/2007) of the week. Is there any functionallity in SSRS 2005 to do this.
Thanks
Dinesh
View 3 Replies
View Related
Aug 1, 2005
Say I have a table which has the validity of an offer as two seperate field, being startDate and endDate:
Code:
ID startDate endDate
1 2005-09-01 2005-10-01
2 2005-06-20 2005-10-20
3 2005-07-18 2005-08-16
Now say I want to filter on this data by startDate and endDate, however I have to return any offer that is valid for a specific period.
E.g. if I filter by startDate = 2005-09-10 and endDate = 2005-10-01 then I want it to return the offers with the ID of 1 and 2 as both of these are valid for the dates I'm filtering on.
I can't for the life of me figure out how to do this at the moment, maybe it's too early in the morning to be thinking about this.
Any help is greatly appreciated.
-D
View 6 Replies
View Related
Jun 27, 2014
I want to know how to make StartDate and EndDate should be greater than current date....
View 4 Replies
View Related
Jul 28, 2014
Here is sample data I am working with:
Create table cattimelines (categoryID int, EffectiveDate datetime, CategoryValue varchar(11))
INSERT INTO cattimelines(categoryID, EffectiveDate, CategoryValue) VALUES(1000, '2014-01-01', 'A')
INSERT INTO cattimelines(categoryID, EffectiveDate, CategoryValue) VALUES(1000, '2014-02-01', 'B')
INSERT INTO cattimelines(categoryID, EffectiveDate, CategoryValue) VALUES(1000, '2014-04-01', 'C')
INSERT INTO cattimelines(categoryID, EffectiveDate, CategoryValue) VALUES(1000, '2014-07-01', 'A')
I need to calculates a term date for each record which will be 1 day before the effective date of any new record, thus:
CATEGORYIDEFFECTIVEDATETERMDATECATEGORYVALUE
10002014-01-012014-01-31A
10002014-02-012014-03-21B
10002014-04-012014-06-30C
10002014-07-01NULLA
View 3 Replies
View Related
Nov 4, 2014
I have one table,
Table1:
EventId EventName EventStartDate EventEndDate RepeatCount StartTimeEndTime
1Event1 2014-11-04 00:00:00.0002014-11-25 00:00:00.000 4 4:30 PM6:30 PM
2Event2 2014-11-05 00:00:00.0002014-11-12 00:00:00.000 2 3.00 AM4.00 AM
3Event3 2014-11-01 00:00:00.0002014-11-15 00:00:00.000 3 1.00 PM 2.00 PM
4Event4 2014-10-30 00:00:00.0002014-11-06 00:00:00.000 2 5.30 PM 6.30 PM
5Event5 2014-10-16 00:00:00.0002014-11-16 00:00:00.000 0 5.30 PM 6.30 PM
I want to display 2 weeks Events from Table 1 depends on repeat count
(if event scheduled on Tuesday(2014-11-04) and repeat count is 4 then it should repeat the 2 row of data)
We have to display only upcomming events, if the repeat count is 0 and the startdate and enddate falls by todays date then it should display as a single row.Data's Should be ordered by recent date
Expected Result
S.NoEventIdEventName EventDateTime
11Event1 2014-11-04 00:00:00.000
22Event2 2014-11-05 00:00:00.000
34Event4 2014-11-06 00:00:00.000
43Event3 2014-11-08 00:00:00.000
51Event1 2014-11-11 00:00:00.000
62Event2 2014-11-12 00:00:00.000
73Event3 2014-11-15 00:00:00.000
85Event5 2014-11-16 00:00:00.000
Assume today's date 2014-11-04 00:00:00.000 and time now 3.40 PM
View 8 Replies
View Related
May 3, 2012
I need query which will check user supplied date range is in between the existing table startdate and enddate.
if any of the date of user supplied date range is in between the tables start date and end date,it should retrun that record from table.
for example user supply date range is from 1 may 2012 to 5 may 2012.
then query must check that
1 may 2005
2 may 2005
3 may 2005
4 may 2005
5 may 2005
(all dates) is in between startdate and enddate of existing table.
View 2 Replies
View Related
Jul 31, 2015
For some of my calculations it is mandatory to get the first and the last date, filtered by the slicer type "timeline".
This works well as long as the date is not used on rows or columns ...
As soon as I'm using theDate within the rows this very simplistic dax measure doesn't work ...
I'm wondering how to determine the StartDate (from the timeline) and the EndDate (from the timeline) when "thedate" is actively contributing to the filtercontext.
In my opinion it is not another example of the "event in progress" situation, due to the fact that start and end dates are actively selected by the user and can not be derived from within the date model.
[URL]
View 2 Replies
View Related
Aug 14, 2015
i have problem generating the SSRS Reports.Â
i have Report URL Â with 2 parameters-- @StartDate and @EndDate
when i hard coded the values and copy the URL in IE, Report gets generated
sample URL's:
[URL]
but when i use Parameters--Report is not getting generated.
[URL]
Below is the error;

Reporting Services Error
The value provided for the report parameter 'StartDate' is not valid for its type. (rsReportParameterTypeMismatch)
SQL Server Reporting Services
View 2 Replies
View Related
Jan 15, 2007
Hi,
I have created a report in SQL reporting using serveral parameters including a date parameters called
StartDate EndDate
Now my requirement is, in ReportViewer I need to validate in such a way where
"StartDate" should not be greater than "EndDate".
So kindly help me out by giving me possible solution for the above issue.
thanks in advance,
Ramesh KS
View 1 Replies
View Related
Sep 26, 2007
select convert(varchar(16), getdate(), 101)+LEFT(REPLACE(convert(varchar, getdate(), 108), ':', ''),4)
From above query I get
mmddyyyyhhmm
but it' s yyyy and hour can not be separated
04/12/200702:05
How can I separated the year and hour ?
Thanks
Daniel
View 2 Replies
View Related
May 13, 2008
When I use the getDate() function I get something like
2005-03-09 15:13:45.017
but I don't want the time, just 2005-03-09
how do you strip out the time from the result?
Thanks
View 2 Replies
View Related
May 28, 2008
How can i getdate in C# code, like we do in SQL Server ?
Thanks.
View 1 Replies
View Related
Apr 27, 2001
However, when I run select getdate() in Sql 6.5 I get the following
Apr 27 2001 11:59AM
Both queries are run from the QueryIsql window.
How can I get the sql 7 version of getdate to be exactly the same as the
sql 6.5 version from the query window without resorting to usign the
convert function?
According to Sql 7 books online, getdate
"Returns the current system date and time in the Microsoft® SQL Server™ standard internal format for datetime values"
View 1 Replies
View Related
Oct 3, 2000
I'm facing some strange problem here:
-----------------------------------------
I'm using some files to show certain pages on certain date for an example
File name : aa.doc
start date: 10/02/00
end date : 10/03/00
But it expires on 10/02/00, here is the strored procedure:
Before the date comes, it expires the page
Here is my stored procedure:
"
SELECT startdate, enddate,archivedate
and (startdate is null or (getdate() >= startdate and getdate() <= enddate))
and (archivedate is null or (getdate() <= archivedate))
group by startdate, enddate order by startdate desc "
Thankx a lot
View 2 Replies
View Related
Sep 20, 2000
i am also trying to write a query that
retrieve information on yesterdays new registered
member. So far as i am concern with sqlserver you use
the getdate()-1 to retrieve this information. But the
problem i get when i try to use the getdate()-1 is
that i tend to get todays and yesterdays registered
users. Is there anywhere that i would be able to
retrieve information on just yesterdays new registered
members and also only todays new register members.
View 1 Replies
View Related
Sep 28, 2000
The following WHERE clause does not generate a datetime from my GETDATEs. Can anyone help me out on the syntax?
WHERE (FROMTIME = GETDATE() AND ToTime = GETDATE())
Thanks much.
TM
View 7 Replies
View Related
Aug 7, 2003
Is it right, that getdate() cannot be used in an user defined function. if so, then how do i get hte current date and time in my function?
View 2 Replies
View Related
May 19, 2005
Hi
I know this is going to sound really daft, but what is the easiest way of getting today's date without the time? Getdate() on it's own doesn't work because it always brings out the time. I know I'm missing something really basic but I can't figure it out.
Please help.
Thanks
View 3 Replies
View Related
Aug 17, 2005
How to get the first and last day of the previous month using function getDate()?
View 2 Replies
View Related
Oct 20, 2004
G'day,
I want to display the current time minus 5 minutes. say
2004-03-29 11:43:49.123 to be 2004-03-29 11:38:49.123.
Is there any Equivalent to the DB2's CURRENT TIMESTAMP - 5 MINUTES which will display the current day say 2004-03-29 11:43:49.123 as
2004-03-29 11:38:49.123
cheers
Melb
View 2 Replies
View Related
May 19, 2006
I'm using getdate() - 74 and getting something like
2006-03-06 11:26:02.870
Is there a simple way to get
2006-03-06 00:00:00.000
instead?
Or just get the date and not the time part. I'm using this date with a between function and the time component is throwing it off.
I'm using
cast(convert(char, getdate(),112) as datetime) - 74
and it works...but there must be an easier way...
View 6 Replies
View Related
Feb 10, 2007
Hi,
when I used getdate() fuction, its giving the correct time in this format 10/02/2007 01:04:31 PM. But I need the time in 24 hour format. Means it should be like 10/02/2007 13:04:31.
How to get it. Please help me!!
shaji
View 5 Replies
View Related
May 21, 2007
select
H.IsoDate,
HI.Country,
HI.Center,
H.ExchangeCode,
HC.Holiday,
H.HolidayCode
from
Holidays H
join
HolidayInfo HI
on
HI.Code = H.ExchangeCode
join
HolidayCodes HC
on
H.HolidayCode = HC.Code
where
H.isodate = getdate()
This is a script but the getdate part is not working can somebody point me in the right direction where i might be going wrong.
The date format in H.isodate is like this:
2005-06-24 00:00:00.000
cheers in advance
View 2 Replies
View Related
Dec 27, 2007
Hello,
I'm new to SQL server and I'm trying to insert the system time into a table.
I'm using following insert statement. But I get an error 'incorrect syntax near the keyword select'
INSERT INTO today(datum) VALUES(SELECT getdate() FROM today)
The datatype of datum is Datetime
Can someone please tell me what I'm doing wrong
Thanks
View 1 Replies
View Related
Mar 13, 2008
I am setting up a table and I want to capture the creation date of each record when it comes in. Obviously the easy way to do this is set the dfault value of this field to getdate(), but I am wondering if there is a benefit to using an insert trigger instead?
I will also be adding a seperate updatedOn field and plan to use an update trigger to populate it. If there is a better way to do either of these please let me know.
View 3 Replies
View Related
Mar 13, 2008
Folks:
I use,
PRINT CONVERT(VARCHAR, GETDATE())
To write the current date to the console (for debugging purposes). Only problem is it only shows hours and minutes (not seconds). Can anyone suggest an equivalent that shows seconds as well?
View 1 Replies
View Related
Mar 27, 2007
Hi if i in a table using getdate then
the field get the date from the Machine this is all right
But when i use getdate in my Query then i get Zerro records Why?
Alvin
View 6 Replies
View Related
Jan 5, 2007
Hi ,
I have problem with Getdate()
i want to create Guest book with VWD 2005 and SQL 2005
I have same problem here for Q1,
http://forums.asp.net/thread/1513111.aspx
I put the Defualt value for the date : getdate()
and then I create insert page, but i got the error below
I tried to [Allow Null] for the data field in sql 2005, but when I add new entries, there is no date entered to the DB.
Can you Help.
thank you
---------------------------------------
Cannot insert the value NULL into column 'guestdate', table 'tour2.dbo.gues'; column does not allow nulls. INSERT fails.The statement has been terminated
View 2 Replies
View Related
Aug 15, 2007
Hello All,
I have a problem as follows
if i execute SELECT GETDATE() statement multiple times in a single run it returns me the same datetime without any difference in even milliseconds.
I am unable to figure out what is wrong. I am assuming that whenever executed in a transaction it will give the same result.
could anybody let me know what is correct. Thanks for your help in advance.
SELECT GETDATE()
SELECT GETDATE()
SELECT GETDATE()
SELECT GETDATE()
SELECT GETDATE()
SELECT GETDATE()
SELECT GETDATE()
even then i get the same date.
View 6 Replies
View Related
Feb 27, 2008
Hi,I want to fetch all records of a table where the datefield (datetime field) equals getdate().select * where mydatfield = getdate()but this gives nothing because getdate() which also contains the min. and seconds, is always greater than the data field which contains 00:00 as min/seconds.Any help would be appreciated.ThanksTartuffe
View 8 Replies
View Related
Apr 11, 2008
hi allcan somebody tell me how can i insert todays date in sqlserver 2000 in dd/mm/yyyy format...i knw we use getdate but how exactly..plz write the code for me...i have datetime as datatype for my column name.....i want it in this format because i am using a datetimepicker to compare values while retreiving the data..and this datetime picker is taking dd/mm/yyyy format so i want to insert records in that format...plz helpthanks in advance
View 12 Replies
View Related
Oct 29, 2005
Can anybody tell me, how can i avoid the seconds in getdate().I want only date and time (hh:mm) format.Thanks in advance
View 2 Replies
View Related