Getting The Operation Could Not Be Completed. (WinMgmt) Error Suddenly In SSMS For RS Connection
Feb 7, 2008
suddenly I'm getting a connect to server error dialogue box that says...
Cannot connect to serverinstance name
Additional information
The operation could not be completed. (WinMgmt)
...when trying to connect to RS2005 Server in Management Studio. I can reach Reporting Manager thru IE and run my reports.
Is it possible that my setting IIS to basic authentication (and turning off Windows Integrated) might be preventing me from connecting in MS, perhaps because MS has to go thru the RS service and doesnt know what basic auth is?
I'm temporarily unable to set IIS back to Windows Auth cuz the server is being used by users to test reports.
Why do I get the message "Operation can't be completed?" when I try to save a stored procedure!!! When I create a new stored procedure and copy the code into it it works fine!
We have a scheduled weekly full backup job running through maintenance plan. We are using Sql 2008r2. Our backup server is windows 2008R2. There is plenty of space in the backup server but still my database full backup failed with the following error.
Executing the query "BACKUP DATABASE [Test] TO DISK = N'C:fullbackup." failed with the following error: "Write on "C:fullbackup est_backup_2015_04_12_200003.bak" failed: 665(The requested operation could not be completed due to a file system limitation) BACKUP DATABASE is terminating abnormally.
We've been using SQL Server 2005 for a while as the db for our web app. Everything has been working fine, until yesterday when we started getting a "Arithmetic operation resulted in an overflow. (System.Data)" error message when trying to connect from SQL Server Management Studio or from our web app. This only happens when trying to connect remotely, although remote connections have worked for us perfectly in the past. The full error message is reproduced below. Thanks ahead of time for any help. ===================================Cannot connect to serverName===================================Arithmetic operation resulted in an overflow. (System.Data)------------------------------Program Location: at System.Data.SqlClient.TdsParser.ConsumePreLoginHandshake(Boolean encrypt, Boolean trustServerCert, Boolean& marsCapable) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
I've been building a simple test application and things have been working all day. Suddenly, about a half an hour ago - I started getting this error every time I attempt to go to the main web page: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I have no idea what changed... Can someone help me figure this out please? Thanks!~A~
Dear members,I'am thinking about the "best" way to connect to my sql-server viaADO.Net (if there is a best way).My application uses the sql-server very intensively. At the momentevery database-operation opens a connection, executes and then closesthe connection.Another way would be to use only a single connection to the database,which is opened when the application starts.What do you think is the better way to get a high performing sqlserver: using one single application connection vs. using oneconnection for every operation?Cheers, Sebastian
I'm troubleshooting a performance issue , Looking at Profiler - for the given statement, I'm getting the following figures , why would there be such a disparity between the figures. ? How can I go about finding out why there is such difference?
hi, i have a message queue system using sql 2005 service broker. the code and setup is the same on both dev and live database. but soon after i restored a live backup to dev. the queue stopped working on dev, live is ok thou. after some trouble shooting, i found that the server is not sending the message at all, but it says "Command(s) completed successfully" without any error messages.
setup:
-----------------------
create message type TestQueryMessage validation = none
create contract TestQueryContract (TestQueryMessage sent by initiator)
create queue TestSenderQueue
create service TestSenderService on queue TestSenderQueue
create queue TestQueueReceiver
create service TestServiceReceiver on queue TestQueueReceiver (TestQueryContract)
send message:
-------------------------
declare @conversationhandle uniqueidentifier;
begin dialog @conversationhandle
from service [TestSenderService]
to service 'TestServiceReceiver'
on contract [TestQueryContract]
with encryption = off;
send on conversation @conversationhandle
message type [TestQueryMessage] ('blah blah blah');
result:
----------------------------------
Command(s) completed successfully.
but when i do "select * from TestQueueReceiver", there's nothing. and i sure nothing else had picked up the messages.
I have a New default instance of SQL2k5 installed and i am trying to setup access to the this via a vpn.
The VPN is setup and allows access to the server and can T/S to the server and perform everything all ok.
When trying to connect over the VPN with SSMS installed on my laptop I am able to connect using Windows authentication only by using Named Pipes. To accomplish this i perform a Net Use ..... and everything works fine.
However if i specify in the connection tab to use TCP/IP it fails with an unknown username or password. The Event Viewer on the server shows this and for what ever reason the username / pwd is that of my laptop and not of the account used in the VPN setup or the net use.
Also if i try to connect to the SQL Server over the VPN using VS 2005 it also gives the same issue.
I need to get this sorted so that TCP is able to be used.
I execute a script that someone else wrote and I get Query Completed with Errors but there is not an error message.If I highlight and execute parts of the script, it completes successfully.
Hello, I am trying to use the Import export wizard to created a package, using the provide source query option. If i just copy the query from a text file and try to paste , sql only accepts it partially. so i saved it as a sql file and then opened it in the window. However, when i click on 'next' or 'parse' , i get the below error.
TITLE: SQL Server Import and Export Wizard
------------------------------ The statement could not be parsed.
------------------------------ ADDITIONAL INFORMATION: Deferred prepare could not be completed. Query timeout expired (Microsoft SQL Native Client)
The query is pretty big, but it executes successfully in the Management Studion Query Explorer window. I had no problem creating a package using DTS with the same query in Sql 2000. I also tried to migrate the package already existing in Sql 2000, but even though i can migrate it successfully , the package does not execute in Sql 2005. Also i tried other queries which are as big as this one, again the query source window during import/export does not seem to accept large queries??? I depend heavily on large queries for my packages, which i run daily. I have not had any issues with this is sql 2000. Can someone help me with this???
One of our dba's runs a process every night to update the database with a daily data file received from an external source. He was testing on a new SQL Server 2012/Windows 2012 R2 cluster that has an Availability Group. While trying to process INSERTs, the process failed with a error: "could not allocate a new page for database X because of insufficient disk space in filegroup PRIMARY."
The log also contains "Operating System Error 1237 (The operating could not be completed. A retry should be performed) encountered".
However, there is 300 GB free on the data drive (E:) where the .mdf file is located. The SQL Server service account has the "Perform Volume Maintenance Tasks" permission (instant file initialization).
All of the disks are VMware 5.1 or 5.5 VM's and the E: disk has thick/eager zero provisioning.
I am running the following query trying to return server properties across a linked server. I want to store the results in a table on the server where I an running the query.
DECLARE @BuildClrVersionx nvarchar(128)
SET @BuildClrVersionx =
(SELECT *
FROM OPENQUERY(LKMSSQLXYZ01, 'CONVERT(nvarchar(128),SERVERPROPERTY("BuildClrVersion")'))
I am getting the following errors:
OLE DB provider "SQLNCLI" for linked server "LKMSSQLADM01" returned message "Deferred prepare could not be completed.".
Msg 8180, Level 16, State 1, Line 1
Statement(s) could not be prepared.
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'CONVERT'.
If you have any ideas how I can run this query across a linked server I would appreciate it.
I am trying to establish a OLEDB connection for a db2 server from SSMS adn some one tell me the settings. I haver tried different options but failed. This is my connection string from SSIS "Data Source=DB2W;User ID=myid;Provider=IBMDADB2.1;Persist Security Info=True;"
I gave Linked Server: DB2W Provider: IBM OLEDB provider for DB2 Product name: ??? DataSource: ??? Provider string:??? Location: ???
One of the instance is hosted in a cluster node with 128GB of ram and 80 processors allocated to this instance...And last week, we had an issue with temp DB as it was full.We increased the drive space over the weekend.
Now whenever we connect this instance from other server through remote SSMS, we see, refreshing the object including connecting to this instance is very very slow...It takes more than 10 sec. Initially this was not the case. Even hear from end user that the application is performing gradually slow.
I check the network, fregmentation, settings across this instance, and all looks good.
I used the selfssl.exe tool to generate a certificate on my db server, successfully added to Personal Certificates in MMC, added R/W permissions for the service account to the cert, selected the new certificate in the protocols for mssql and restarted the service. So far so good, however when trying to connect from SSMS with encryption check box checked I get the following error:
A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.) (Microsoft SQL Server, Error: -2146893019)
The certificate chain was issued by an authority that is not trusted.
When I look in MMC, the only intended purpose for the certificate is "Server authentication" and I'm not able to add "Client authentication". Does selfssl.exe not support client authentication?
connecting to a SQL Server Instance. I have a SQL server DB on a server having an Instance not running on the default port. Let's say ServerAInstanceA has the services exposed on Port 12345. When I'm trying to connect to ServerAInstanceA without specifying the port number, while I can connect from one client machine (ClientA), I am unable to connect from a different client machine (ClientB).On a side note, when I provide the port number, I can connect both from clients A and B. My question is, when I do not provide the port number, why is one client machine able to connect while the other isn't?
We have a nagging issue here in our application side, which I was trying to troubleshoot and reach no where. Can I have your valuable inputs for resolving/understanding the root cause of the issue?
3709-The connection cannot be used to perform this operation. It is either closed or invalid in this context
This error is not coming regularly (twice it happened and after the program is running successfully with out any problem). Problem having exe is running every 2 minutes interval.
Most of the sites saying this is something related to code written in the application but if that is the case why this error is not happening continuously? The problem having exe is running past 4 months with 2 minutes interval and suddenly thrown this error.
I found one MS site describing about this error but not able to find any fixes for this issue (http://support.microsoft.com/kb/839428). We are on the process of upgrading the operating system with SP2; will this help us to resolve this issue? Please advice.
Details
1. Windows 2003 with SP1 2. MDAC 2.8 3. SQL 2005 with SP1 4. VB Application.
My apologies...I wasn't for sure where to post an error like this...
Over the last 2 months I have gotten this SQL Server error (twice). All existing processes will continue to work, however no new processes can be created and users cannot connect to the server. This is the exact text of the message in the SQL Server error log.
Operating system error 10038: An operation was attempted on something that is not a socket...
Error: 17059, Severity: 18, State: 0
Error accepting connection request via Net-Library 'SSNETLIB'. Execution continuing.
Error: 17882, Severity: 18, State:
While we can typically just stop SQL Server Service and restart the services...I have found it is best to restart the machine during non-production times to take care of any 'residual' effects of this error.
The SQL Server 2000 SP4 box with Windows 2003 Standard SP1 is well maintained by our I.T. team and it typically will run 4 or 5 months without a reboot.
Hi, I have developed a website in asp.net 2. I have tester it and it is working fine on my computer but when I have uploaded it to my server I'm getting an error message when the user signup. The error occurs when I'm setting the user role to 'members'.
Error line > Roles.AddUserToRole(user.UserName, "members")
The strage thig is that it is working on my computer but not on the server. My home computer and the server are running the same software versions and the website database is the same as well.
To double check that my code is not generating the error I have lonched 'SQL Query Analizer' and executed the folowing code on my database: NOTE: In my database I have create the user “teeluk12� and a role “members�
I'm using SQL Server 2012 Analysis services in Tabular mode and connected to Oracle Database and while importing, I'm getting below error after importing some rows.
OLE DB or ODBC error: Accessor is not a parameter accessor.. The current operation was cancelled because another operation in the transaction failed.
I am playing with DBCC command to check the contsrainst on a perticular table (DBCC CHECKCONSTRAINTS ('myTable') WITH ALL_CONSTRAINTS), it always gives the following result:
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
System.Data.SqlClient.SqlError: Exclusive access could not be obtained because the database is in use. (Microsoft.SqlServer.Smo)
===================================
any ideas?
this is actually a restore from a BAK file saved from the live server. we copied the bak file over and placed it on the test server hard drive, now we are trying to restore this using SSMS
Executing Parse in Sql Server 2005 Management Studio I get the following error:
.Net SqlClient Data Provider: Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
Reading SP1 fixes, I found a similar problem but despite I installed latest hotfix (sql version is now 9.0.2153) I can't able to execute Parse to check T-SQL statements...
I executed the following code statements in my SQL Server Management Studio Express Edition program that is on Windows XP Pro PC-Microsoft Windows NT 4 LAN system:
-----SQLQuery.sql-------
USE testDb
GO
CREATE VIEW InventoryPublisherView AS
(SELECT * FROM Inventory AS I FULL OUTER JOIN Publisher AS P ON I.ID=P.InventoryID
SELECT * from InventoryPublisherView
SELECT Name, type, quantity, pubName from InventoryPublisherView
DELETE FROM InventoryPublisherView WHERE ID=1
ALTER VIEW InventoryPublisherView AS
(SELECT ID,name,type,quantity,pubName FROM Inventory AS I FULL OUTER JOIN Publisher AS P ON I.ID=P.InventoryID)
I have W2K Adv, SQL 7 Enterprise in a workgroup with mixed security. The SQL installation is an almost entirely default install.
At the console, in SQL Enterprise Manager, when I select open a database, open tables, select a table, open table, and select all rows the system displays "an unexpected error happened during this operation". As far as I know this has never worked on this installation.
The error occurs with every logon account (including sa and local administrator accounts), both the "all rows or top row" options, every table, every database (including the customers database and the Northwind database).
I have tried adding administrators and accounts as users of the databases etc. and given the accounts all the permissions I can dream up.
There are no interesting messages in the event viewer. The SQL agent is running.
Technet found two documents but not related to the problem.
I can run SQL Analyzer and run "select * from table_name". That works on the Northwind and customer database tables - every time.
Colleagues with other installations do not get the error, and their systems return the rows correctly.
We are using a microsoft small bussiness server. One of our workstations get an mgrntw illegal operation error sometimes when doing an invoice in pastel premier. Does anyone know what can cause this problem and how can I fix it? The server run on windows 2000 and the workstations all use windows 98SE. This problem does not happen everyday. I formatted that computer, hoping the problem will go away but after 3 weeks it suddenly appeared again. I am not sure what version our mgrntw.exe is.
Hiwhen i right click table and click design table then error occured(an unexpected error occured during this operation)If any one knows please let let me know your help would be appreciated .thankspardhi--Message posted via http://www.sqlmonster.com
