I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com) B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com) C - Just the end portion of the SMTP properties: (abcd.efgh.company.com) D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
I have an issue with a DTS package. We create a zip file and then attach it to emails going out using DTS. The problem is that the attachment, when received, is named using the full path to the file, so it is quite long.
Has anyone seen this before? Is there a way out of this?
I am considering mapping a drive to the share holding the file to be named, but the fact is this will shorten the name but will still result in the path being included.
I am wondering if this is a bug, as I suspect this isn't the default behaviour.
Attemping to reattach a recovered .mdf and associated .ldf from a crashed disk drive and I am getting the error below. I attempted to create a new db, stop the service, replace the new data files with the recovered db files and restarted the SQL service so that I could run a dbcc checkdb while the db was in suspect mode, however was unable to do this. This error leads me to belive that the log file needs to be rebuild, but that the mdf files could be a decent shape. Any help would be apprecaited. Thanks!
===================================
Attach database failed for Server 'AUTOBASEAutobase'. (Microsoft.SqlServer.Smo)
------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
------------------------------ Program Location:
at Microsoft.SqlServer.Management.Smo.Server.AttachDatabase(String name, StringCollection files, String owner) at Microsoft.SqlServer.Management.SqlManagerUI.AttachDatabaseData.PrimaryFile.Attach() at Microsoft.SqlServer.Management.SqlManagerUI.AttachDatabase.SendDataToServer()
===================================
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------ Program Location:
at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType) at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(StringCollection sqlCommands, ExecutionTypes executionType) at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQuery(StringCollection queries) at Microsoft.SqlServer.Management.Smo.Server.AttachDatabaseWorker(String name, StringCollection files, String owner, AttachOptions attachOptions) at Microsoft.SqlServer.Management.Smo.Server.AttachDatabase(String name, StringCollection files, String owner)
===================================
An error occurred while processing the log for database 'ABSystem7'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log. Could not open new database 'ABSystem7'. CREATE DATABASE is aborted. (.Net SqlClient Data Provider)
------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=9004&LinkId=20476
------------------------------ Server Name: .Autobase Error Number: 9004 Severity: 21 State: 1 Line Number: 1
------------------------------ Program Location:
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType)
I have a VBExpress 2008 application that uses LINQ to SQL to manipulate data in an SQLExpress 2005 database.
I successfully instatiate a DataContext object and examine its metadata through its .Mapping methods and properties. But when I attempt to set the DataSource for a BindingSource control to one of the tables, I get a run-time error.
Specifically:
Dim dc As New DiabetesData(My.Settings.DiabetesData_dbPath)
generates the error: System.Data.SqlClient.SqlException was unhandled Class=14 ErrorCode=-2146232060 LineNumber=65536 Message="An attempt to attach an auto-named database for file SbearMedicalDiabetesDiabetesData2.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share." Number=15350 Procedure="" Server="\.pipe8280AA0D-38A6-41 sqlquery" Source=".Net SqlClient Data Provider" State=1
From the Immediate window: ?My.Settings.DiabetesData_dbPath
"SbearMedicalDiabetesDiabetesData2.mdf"
bsPrimary is a BindingSource on a form named frmEZView.
Public Class DiabetesData includes a property Public BGTests As Table(Of BGTest) and a subsequent definition of BGTest.
I installed sql 2005 a while back. Then I recently found out my file system was fat32 (I don't understand why the hardware people did this...) and I had to convert to NTFS. Naturally the sql service no longer worked so I uninstalled inorder to reinstall now I can't reinstall it I keep getting this message
native_error=5039, msg=[Microsoft][SQL Native Client][SQL Server]MODIFY FILE failed. Specified size is less than current size.
I just created a very simple package in SQL 2005 using the Send Mail task - i made a connection manager & specified the Exchange server - and then ran the package and i got the below message: I am not sure what i did wrong since the message is pretty general. Anyone help would be very appreciated. Thanks
SSIS package "Test.dtsx" starting. Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Failure sending mail.". Task failed: Send Mail Task SSIS package "Test.dtsx" finished: Success.
Hello, I have the following problem. I have a (Test-) package containing a task that deletes rows in a table. On Failure I implemented a Send Mail task that informs me about the output. Now the problem: If I run the package in BIDS on my client computer the mail is sent and I get it. The same is true if I run the package on BIDS on the Testserver where the package is stored. Also I get a mail when running the package as SQL Agent Job. But I never get a message when I simply execute the package from the Managament Studio. Then I get the error message: "The task Send Mail Task cannot run on this edition of Integration Services. It requires a higher level edition. " This is the same whether the package is stored in msdb or in the Filesystem. Does anyone know why this is the case or how I can get rid of this error?
I am trying to use Send Mail Task to send mails within my package and I get the following error. "The server response was: 5.7.1 Unable to relay for test@mail.com". Can anyone help me on this?
I setup a "Send Mail Task" task and an SMTP connection objection. I ran the package and got this error:
>>>
SSIS package "Package.dtsx" starting. Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Failure sending mail.". Task failed: Send Mail Task Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. SSIS package "Package.dtsx" finished: Failure.
>>>
Usually the SSIS error messages are too complicated for me to understand but this one doesn't say enough to be useful. Next, I purposely put in an invaid IP address (last octet = 3456 !) for the SMTP address, ran the package, and got the identical error message. I learned something.
What SSIS toolslogsstrategies can help me track down the problem?
I am trying to explore the email task in SSIS. I have a task which has only the email task. When I run its not throwing any error instead it says successfuly run but I am not recieving mail. I dont know how to trace this, could someone help me on this?
I have a package which is creating a excel file 'ExcelName.xls' and storing in 'E:ReportingDelivered_Reports'. Now I have to attach this report using send mail task and send it to given mail id. To achieve this I have configured the send mail task and in Expression Builder, I have selected the below expression:
I need file name should be 'ExcelName_20150601' where suffix is the current date. But I recieve file which name is 'ExcelName', which is the original file name.
Could you tell me which code of vb scrip that i can check file size as follow ?
Dim FSO, Fyl Set FSO = CreateObject("Scripting.FileSystemObject") Set Fyl = CreateObject("File")
If FSO.FileExists("C: emplcbseg.log") Then Set Fyl = FSO.GetFile("C: emplcbseg.log") If Fyl.Size > 0 Then Main = DTSStepScriptResult_ExecuteTask Else Main = DTSStepScriptResult_DontExecuteTask End If End if
I have a problem using the send mail task with expressions. What I want to do is send a mail to all email addresses stored in a particular table.
What I already did:
I created a dataflow task that retrieves all email addresses from that particular table and writes them to a recordset destination; After that, I created a 'for each loop container' that loops through all email addresses. Until here, the package runs without any problems, and all email addresses are returned. Now I put a 'Send Mail' task in this 'for each loop container'. I enter a smtp connection, a from, a subject and a messagesource manually. But of course, I want the 'to' to be filled dynamically on runtime. Because of that, I added an expression on the expression tab where I map the ToLine with the variable filled during the loop. And now the problem: confirming everything and exiting the 'Send Mail' task result in a red cross appearing on the task, telling me 'No recipient is specified'. Of course, no recipient has been specified, as I want it to be filled on runtime. What I already tried, was to enter a recipient in the 'to'. Then the red cross disappears, but when running the package I get the same error.
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
We currently have a SSIS package which is using a batch script . This batch script actually executes on TERADATA server and loads data in to terdata db. We did not get access to UNIX env so we are planning to create SSIS packages that can call the batch scripts and perform tasks on terdata.
Can somebody throw some light how to caputure the information if there is error in batch script or data loading and send a mail.
Ealrier we created packages that were doing data loading on SQL server and if something fails then we used error handling machanism in stored procedures which logs failure event in to SQL table and then using send mail task it send a email.
I nwant to know how to use error handling when something fails on terdata and send mail to us.
Hello everyone, I'm having an issue with dynamically setting the Send Mail task's to field to decent sized recipient list(approx 15 email addys). The strange thing is that this same package works fine if I'm using a list of say 4 email addys. I have double checked everything I can think of....list is seperated by semicolons, each address looks good....and have ran script tasks to check my variables along the path of the package but so far have not found the reason. The error I get is below:
"The specified string is not in the form required for an e-mail address"
Also of note, these addresses are being populated from a table, that is then setting the To string of the send mail task via a seperate variable...that variable being populated from a foreach loop. Again, all of this works fine with a smaller recipient list. Any ideas?
The only thing I can think of right now is to run the send mail task within the foreach loop...but then I'll be sending a seperate email for each address and would like to avoid that if possible.
Is there anyway to  send excel file from ssis using send mail task without saving the excel file locally. I need to automate the process which involves loading the excel file from the database and send it to some people.Â
Dear all, I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail. but still the Mail Task is failing.. plz suggest.
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete [Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.". Progress: The SendMail task is completed. - 100 percent complete Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
I am trying to resize a database initial log file from 500M to 2M. I€™m using€?
ALTER DATABASE <DBNAME> MODIFY FILE ( NAME = <DBLOGFILENAME, SIZE = 2 ) "
And I'm getting "MODIFY FILE failed. Specified size is less than current size." I tried going into the database properties and setting the log file to 2M, but it doesn€™t keep the changes.
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Does anyone know how to do this using variables? Everytime I try it, I get the
Error: Failed to lock variable for read access with error 0xc00100001.
I also tried it writing a script and still the same error. If I hard code the values into the variables it works fine but I will be running this everday so that it will pull in the current date along with the filename. So the value of the variables will change everyday. Here is my expression:
I am able to run SSIS packages as SQL Server Agent jobs with a Control Flow items "File system task", if I move a file (test.txt) from a drive (c on the server (where SQL Agent jobs run) to a subdirectory on the same drive. But, if I try to move a file on a network drive, the package fail.
I have trying to execute the Sendmail task in my development envinorment i face this error..I have given the clear details error message below,Please have a look.
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.  System.Net.WebException: Unable to connect to the remote server  System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions ".Alternatively  i use the  SMTP connection to create the subscription as well,its working properly.
Here we are accessing SMTP connection manager as Virtually.Here in my client network we are using Macafee Anti virus ,We have excluded the Rsconfigration file in the excluded list.I dont know why this problem occures again using Sendmailtask in ssis?
I'm trying to send a email to myself when my DTS package has successfully been executed or failed. However, my "Send Mail Task" will not execute successfully, not even in BIDS. I don't see any error messages, however, I do remember seeing something about "Server Authenication Required". I'm at work on the company's network and using MS Outlook 2003. I have no problems sending and recieving mail through Outlook. I went into Outlook to find my companys' SMTP server name and entered that info in the SMTP Connection Manager Editor, with the "Use Windows Authenication" button checked. But it still do not run successfully. I get the same error at home on my own computer. Can't figure it out!
When using "Send Mail Task" is there any other configuration required in BIDS to activate sending mail out or is there something I'm missing in configuring SMTP Connection Manager? Please advise. Thank you in advance.
I want to store a Zip file as a BLOB, but I get an error: "File 'C:<path of mdf file> ' appears to have been truncated by the operating system. Expected size is 2560KB but actual size is 1536KB " whenever the BLOB exceeds 1MB.
Any suggestions? How can I store larger .ZIP files to the Database? I am using MS SQL 2005 Express and the data type that I gave for the column to store Blob is "varbinary(MAX)".
I am inserting byte array in to this field. It works fine for a zip file less than 1MB but as soon as the zipped file size increases beyond 1MB, lots of error pop-up and then the database is not readable. Its says that, the data in the data base may have been corrupted...