hello,
i have a problem in my sql. im using a stored procedure and i want to get the newly created id number to be used to insert in the other table.
it works like:
insert into table() values()
select @id = (newly created id number) from table
insert into table1() values(@id)
something like that.
I am trying to execute three dts packages from a Job that I created. When creating the steps I am setting the Type To: Operating System Command(CmdExec).
The Command I am using is: dtsrun /S servername /E /dtsPackageName
For some reason whenever I try to run thes jobs it fails. Within this Job I have three steps. For each step I am using the same job but with a different package name. I have a trusted connection so my command should work just fine. What am I doing wrong. Can some please explain this process.
Thanks
I am trying to create a simple query like this -
SELECT
Column_1,
Column_2,
Column_3,
10*Column_1 AS Column_4,
10*Column_2 AS Column_5,
-- I am not being able to understand how to do this particular step Column_1*Column_5 As Column_6
FROM Table_1
First 3 Columns are available within the Original Table_1
The Column_4 and Column_5 have been created by me, by doing some Calculations related to the original columns.
Now, when I try to do FURTHER CALCULATION on these newly created columns, then SQL Server does not allows that.
I was hoping that I will be able to use the Newly Created Columns 4 and 5 within this same query to do further more calculations, but that does not seems to be the case, or am I doing something wrong here ?
If I have to create a new column by the name of Column_6, which is actually a multiplication of Original Column_1 and Newly Created Column_5 "I tried this - Column_1*Column_5 As Column_6", then what is the possible solution for me ?
I have tried to present my problem in the simplest possible manner. The actual query has many original columns from Table_1 and many Calculated columns that are created by me.And now I have to do various calculations that involve making use of both these type of columns.
Hi
I had DTS the Northwind sample database from SqlServer 2000 to 2005. It's went ok and no errors. Then, I created a SP named upGetCustomer, bascially it queries the Customers table and list some of it's fields and order by CustomerId,CustomerName, Country decrementally. SP is so simple and has no errors.
Then, I created a SqlServer project in VS2005 using C#. Add store procedure class as below,
using System;
using System.Data;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using Microsoft.SqlServer.Server;
public partial class StoredProcedures
{
[Microsoft.SqlServer.Server.SqlProcedure]
public static void Customers(string customerid)
{
using (SqlConnection sqlConn =
new SqlConnection("context connection=true"))
{
sqlConn.Open();
SqlPipe sqlPipe = SqlContext.Pipe;
SqlParameter param = new SqlParameter("@custId", SqlDbType.VarChar, 5);
param.Value = customerid;
SqlCommand sqlCmd = new SqlCommand();
sqlCmd.CommandType = CommandType.StoredProcedure;
sqlCmd.CommandText = "upGetCustomer";
sqlCmd.Parameters.Add(param);
SqlDataReader rdr = sqlCmd.ExecuteReader();
SqlContext.Pipe.Send(rdr);
}
}
I had taken method of created SQLCLR from source in Microsoft website, but coding is mine, and hopes it is correct. I used SqlConnection string as 'context connection=true' which I still not quite sure what does it means, hopes it mean current connection I am using on my Windows authentication.
The project did compiled & deployed OK on the VS2005 side.
The problem is that when I tried to locate the assembly on the Sql Server 2005, but can't find it anywhere on Sql Server.
I did try complied and deloyed again, it keeps saying there is an error in deployment as customers assembly is already exist on the database. I then, tried to remove this assembly on the database using SQL script, drop assembly customers in the Northwind database but got error saying it does not exist. So where is it???
Please help...
Thank you
I am trying to create a simple query like this -
SELECT
Column_1,
Column_2,
Column_3,
10*Column_1 AS Column_4,
10*Column_2 AS Column_5,
-- I am not being able to understand how to do this particular step Column_1*Column_5 As Column_6
FROM Table_1
First 3 Columns are available within the Original Table_1
The Column_4 and Column_5 have been created by me, by doing some Calculations related to the original columns.
Now, when I try to do FURTHER CALCULATION on these newly created columns, then SQL Server does not allows that.
I was hoping that I will be able to use the Newly Created Columns 4 and 5 within this same query to do further more calculations, but that does not seems to be the case?
If I have to create a new column by the name of Column_6, which is actually a multiplication of Original Column_1 and Newly Created Column_5 "I tried this - Column_1*Column_5 As Column_6", then what is the possible solution?
I have tried to present my problem in the simplest possible manner. The actual query has many original columns from Table_1 and many Calculated columns that are created by me. And now I have to do various calculations that involve making use of both these type of columns.
I have a table that I have created a table and desire to do some basic math by adding a few new columns. The problem is that i cant get this to work without create many new select statements. The new columns that I wish to add refer to other newly created columns. Is there a way I can do this with CTW or subqueries? Unless it is a best practice to chain out the logic for the newly created columns
I have an example from AdventureWorksDW since the data is very accessible. I can safely create EMP_TENURE and PTO_REMAINING is this select statement. I would then need to create a new select statement to define 'BONUS' and then another select statement to define 'NEW_COL1' and so on.
Im still pretty new at SQL and am trying to learn how to complete such a task using subqueries or CTE.
SELECT
NAME = [LastName] + ',' + [FirstName]
,HireDate
,Title
,DepartmentName
,BaseRate
,VacationHours
,SickLeaveHours
[Code] ....
I created a database called sports and then created a table which I'm going to use as a template for other tables within the same database.
What is the proper way to structure and implement copying this template table?
Should I store the template table under the system tables folder?
How do I copy the template table and create a new table from this template?
Thanks you
Goldmember
Hi!
I have a piece of code that connects to the master database and uses the simple 'CREATE DATABASE MYDATABASE' statement to create a new database on an sql server 2005 express instance.
I then close that connection and try to open a new connection using my newly created database. I use integrated authentication in both cases. However, I get the following error: Cannot open database "MYDATABASE" requested by the login. The login failed.Login failed for user 'DOMAINNAMEusername'.System.Data.SqlClient.SqlException: Cannot open database "MYDATABASE" requested by the login. The login failed.
I don't get this error all the time. I tried to run my code many times and it some times work. But in some cases it doesn't. The database is always created but some times I cannot connect to it. But again, if I wait a little and try again with the same database, the connection is made.
I know that my connections are opened and closed normally and they don't remain open. So I don't believe I reach the maximum number of available connections.
I also sometimes get this exception : A connection was successfully established with the server, but then an
error occurred during the login process. (provider: Shared Memory
Provider, error: 0 - No process is on the other end of the pipe.
Any clue?
I created a new database in SQL Server 2000, using the command
"CREATE DATABASE ContactManager ON PRIMARY(NAME = ContactManager,FILENAME ='C:Program FilesMicrosoft SQL ServerMSSQLDataContactManager.mdf',SIZE = 5MB,MAXSIZE = 20MB,FILEGROWTH = 5MB)LOG ON(NAME = ContactManager,FILENAME = 'C:Program FilesMicrosoft SQL ServerMSSQLDataContactManager.ldf',SIZE = 2MB,MAXSIZE = 10MB,FILEGROWTH = 2MB)Go"
Databse was successfully created and I created two tables also in it. Now when i try to create a new connection in Visual Web Developer 2005, I get the error message :
"Directory lookup for the file "C:Program FilesMicrosoft SQL ServerMSSQLDataContactManager.mdf" failed with the operating system error 5 (Acess is denied.).
Cannot attatch the file "C:Program FilesMicrosoft SQL ServerMSSQLDataContactManager.mdf" as 'ContactManager'."
What else do I need to do use the database?
I have many new tables for which i need to write Insert,Update and delete triggers manually. Is there any way to generate triggers script which takes table name as a input parameter and print/generate trigger's script?
View 1 Replies View RelatedWhy are the user databases that were created in the MSSQLSERVER default instance showing up in the newly created ALPHAONE instance? I'm successfully logging into the alphaone database as it shows as "DASAlphaOne,1xxxPport) at the top of the treeview in ssms. I'm logging in as sa and can edit anything.
The issue here is that all the user databases are shown and can even be edited. I created this instance in an effort to hide databases from whoever is not supposed to see.I was expecting a clean instance with only the system databases..Is there something that can be set to keep each instance's databases private into itself?
We've been running a mirrored database (using certificates since we don't have a domain) and it's all working well. Last week we decided to add a witness for automatic failovers, but for some reason I just can not get the witness to connect to the Partner2 server.
See screenshot here
Please help me troubleshoot this - I re-created the endpoints / users / certificates but it's still not working. Where can I get more information on what exactly the problem is? Can I test the endpoints somehow?
Hello dear Forum,
I guess this should be rather simple to answer but i just don't get how to do this. I just want to import some data from an Access mdb file into a SQL Server 2005 Database.
As I dont want to create all tables in Sql Server 2005 beforehand i'd like to create them out of my SSIS Package. Therefore i use the 'Execute SQL Task' in the control flow before stepping into the dataflow where only a oledb-source and an oledb-destination exist...
VERY simple... My problem is, that i can't select the table from the selectionlist in the oledb-destination because it does not exist before executing the package...
If i create the table by hand just to be able to select it, that does not help. because if everything is set up and then i delete the table (because it will be created by the package anyway) an error occurs before executing the package - in the validation phase:
Package Validation Error: "Invalid object name 'myToBeCreatedTable'".
Can't i create tables on the fly which i use then in my dataflow tasks?
Kind regards,
Wolfgang
Hello dear Forum,
I guess this should be rather simple to answer but i just don't get how to do this. I just want to import some data from an Access mdb file into a SQL Server 2005 Database.
As I dont want to create all tables in Sql Server 2005 beforehand i'd like to create them out of my SSIS Package. Therefore i use the 'Execute SQL Task' in the control flow before stepping into the dataflow where only a oledb-source and an oledb-destination exist...
VERY simple... My problem is, that i can't select the table from the selectionlist in the oledb-destination because it does not exist before executing the package...
If i create the table by hand just to be able to select it, that does not help. because if everything is set up and then i delete the table (because it will be created by the package anyway) an error occurs before executing the package - in the validation phase:
Package Validation Error: "Invalid object name 'myToBeCreatedTable'".
Can't i create tables on the fly which i use then in my dataflow tasks?
Kind regards,
Wolfgang
Hello dear Forum,
I guess this should be rather simple to answer but i just don't get how to do this. I just want to import some data from an Access mdb file into a SQL Server 2005 Database.
As I dont want to create all tables in Sql Server 2005 beforehand i'd like to create them out of my SSIS Package. Therefore i use the 'Execute SQL Task' in the control flow before stepping into the dataflow where only a oledb-source and an oledb-destination exist...
VERY simple... My problem is, that i can't select the table from the selectionlist in the oledb-destination because it does not exist before executing the package...
If i create the table by hand just to be able to select it, that does not help. because if everything is set up and then i delete the table (because it will be created by the package anyway) an error occurs before executing the package - in the validation phase:
Package Validation Error: "Invalid object name 'myToBeCreatedTable'".
Can't i create tables on the fly which i use then in my dataflow tasks?
Kind regards,
Wolfgang
I am new to SQL Programming. I am learning the basics. I am trying to create a simple query like this -
SELECT
Column_1,
Column_2,
Column_3,
10*Column_1 AS Column_4,
10*Column_2 AS Column_5,
-- I am not being able to understand how to do this particular step Column_1*Column_5 As Column_6
FROM Table_1
First 3 Columns are available within the Original Table_1
The Column_4 and Column_5 have been created by me, by doing some Calculations related to the original columns.
Now, when I try to do FURTHER CALCULATION on these newly created columns, then SQL Server does not allows that.
I was hoping that I will be able to use the Newly Created Columns 4 and 5 within this same query to do further more calculations, but that does not seems to be the case, or am I doing something wrong here ?
If I have to create a new column by the name of Column_6, which is actually a multiplication of Original Column_1 and Newly Created Column_5 "I tried this - Column_1*Column_5 As Column_6", then what is the possible solution for me ?
I have tried to present my problem in the simplest possible manner. The actual query has many original columns from Table_1 and many Calculated columns that are created by me. And now I have to do various calculations that involve making use of both these type of columns.
I run a query
select col1, col2, col3, col4
from Table
where col2=5
order by col1
I have a primary key on the column.The execution plan showing the clustered index scan cost 30% & sort cost 70%..When I run the query I got missing index hint on col2 with 95% impact.So I created the non clustered index on col2.The total executed time decreased by around 80ms but I didn't see any Index name that is using in the execution plan.After creating the index also I am seeing same execution plan
The execution plan showing the clustered index scan cost 30% & sort cost 70% but I can see the total time is reducing & Logical reads on that table is reducing.I am sure that index is useful but why there is no change in the execution plan?
I am getting ready to start a project where I am charged with moving out old data from production into a newly created historical DB. We have about 8 tables that are internal audit tables, that are big and full of old data. These tables are barely used and are taking up way too much space and time for maintenance.
I would like to create a way (SSIS?) to look at the date field in each of the 8 tables and copy out anything older than two years into my newly created history DB. Then deleting the older records from the source DB.
I don't know if SSIS is the best method to use. If it is, what containers to use to move over data, then how to do delete from source?
Can I do the mass deletes on my audit source tables without impacting performance/indexes/fragmentation?
I have a four tables called plandescription, plandetail and analysisdetail. The table plandescription has the columns DetailQuestionID which is the primary and identity column and a QuestionDescription column.
The table plandetail consists of the column PlanDetailID which the primary and identity column, DetailQuestionID which is the foreign key attribute of plandescription table and a planID column.
The third table analysisdetail consists of a analysisID which the primary and identity column, PlanDetailID which is the foreign key attribute of plandetail table and a scenario.
Below is the schema of the three tables
I have a two web form that will insert, update and delete data into these three tables in a two transaction. One web form will perform CRUD operations in plandescription and plandetail table. When the user inserts QuestionDescription and planid in this web form, I will insert the QuestionDescription Value in the plandescription table and will generate a DetailQuestionID value and this value is fed to the plandetail table with the planid. Here I will generate a PlanDetailID.
Once this transaction is done, I will show the second web form in which the user enters the scenario and this will be mapped with the plandescription using the PlanDetailID.
This schema cannot be changes as this is the client requirement. When I insert values I don’t have any problem. However when I update existing data, I need to delete existing PlanDetailID in the plandetail table and recreate PlanDetailID data for that DetailQuestionID and planID. This is because, the user will be adding or deleting a planID associated with the QuestionDescription.
Once I recreate PlanDetailID for that DetailQuestionID and planID, I need to update the old PlanDetailID with the new PlanDetailID in the third table analysisdetail for the associated analysisID.
I created a #Temp table called #DetailTable to insert the values analysisID, planid and old PlanDetailID and new PlanDetailID so that I can have them in update statement once I delete the data from plandetail table for that PlanDetailID.
Then I deleted the plandetailid from the plandetail table and recreate PlanDetailID for that DetailQuestionID. During my recreation I fetched the new PlanDetailID’s created into another temp table called #InsertedRows
After this I am running a while loop to update the temp table #DetailTable with the newly created PlanDetailID for the appropriate planID’s. The problem is here. When I have the same number of planID’s for example 2 planID’s 1,2 I will have only two old PlanDetailID and new PlanDetailID for that planID and analysisID.But When I add a new PlanID or remove a existing planID I am getting null value for that newly added or deleted planID. This is affecting my update statement of analysisdetail table as PlanDetailID cannot be null.
I tried to remove the Null value from the #DetailTable by running the update statement of analysis detail in a while loop however its not working.
DECLARE @categoryid INT = 8
DECLARE @DetailQuestionID INT = 1380
/*------- I need the query to run for the below three data.
Here i'm updating my planids that already exists in my database*/
DECLARE @planids VARCHAR(MAX) = '2,4,5'
[code].....
I am setting up SQL audit on sql servers in my environment based on requirement. I want to create database specifications ASAP database created. I tried DDL trigger but Audit doesn't support triggers. So I created audit specifications on model database. the only problem with this is every specification created on new database with same name.database specification name includes newly created database name or other methods to create database specifications on newly created databases.
View 6 Replies View RelatedHow can i assign permissions to a newly created users as of an existing user?
View 3 Replies View RelatedIs there any maximum cap on the number of users that could be created in a given database of MS-SQL Server?
View 4 Replies View RelatedI am having to debug a procedure that is called by a control in javascript that I do not have any control over accept for setting the procedure name to call.
I matched my parameters to my procedure to what I define as the parameters list, but somehow I keep getting a too many parameters specified.
If I had control over it in C# it would be easy to select which params are actually being sent, but I would like to give a procedure name to call and I can log the parameters sent somewhere.how to do.
I need to write down a sql query wherein in one particular day(user will enter manually), i need to find out a 15 minutes slot wherein purchase order's created or updated are the highest.
i.e. out of 96 slots(15 minute slot each)-I need to find the slot which has maximum number of Purchase orders created or updated.
trying to get a new database created then running a script to created the tables, relationships, indexes and insert default data. All this I'm making happen during the installation of my Windows application. I'm installing SQL 2012 Express as a prerequisite of my application and then opening a connection to that installed SQL Server using Windows Authentication.
E.g.: Data Source=ComputerNameSQLEXPRESS;Initial Catalog=master;Integrated Security=SSPI; Then I run a query from my code to create the database eg: "CREATE DATABASE [MyDatabaseName]".
From this point I run a script using a Batch file containing "SQLCMD....... Myscriptname.sql". In my script I have my tables being created using "Use [MyDatabaseName] Go CREATE TABLE [dbo].[MyTableName] .....". So question is, should I have [dbo]. as part of my Create Table T-SQL commands? Can I remove "[dbo]."? Who would be the owner of the database? If I can remove the [dbo]., should I also remove dbo. from any query string from within my code?
Hi Folks,
I'm having a bit of trouble updating my script. I have a
script used for MS Access and I need to transfer it to be
compatible with MS SQL Server. When I run the script it
gives the error
''ODBC driver does not support the requested
properties.''
This is the line of the script
that I have to change to work with sql:
''oRS.Open SqlTxt , oConn'' and the sql text is:
''Sqltxt = "SELECT MasterServer, Max(JobId) AS MaxJobId
FROM Jobs GROUP BY MasterServer ORDER BY MasterServer;".
Could anybody please help me out in solving this problem?
Cheers!
Hello All,
I've created access project using upsizing wizard. Project is created ok on slq server 7.0(ie tables, stored proc, views etc.) but when i open tables or forms in A2k it doesn't allow me to enter or modify data. Though all permissions are Ok.
Could anyone please let me know what could be wrong?
Thanks in advance!!
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I am using SQL server Express 2005 on my local machine. And ASP.net 2.0 with C#.
Hello Fellow Members,
Background:
Hopefully someone out there can help me. Here is the situation. I have a documents table which stores "documents". A document can either be a folder or a actually document(word, excel ...). This is determined by a field in the table called 'Type' which is either a '0' or '1'The table stores the following data for each 'document'--------------------------------------------------------------------------------DocID - intDocument - Actual document in bytesLeafName - Actual document nameType - Determines type of document (0 - document, 1- folder)DirName - Which folder the document resides in (can be null)
Problem:I want to create a query which navigates through the entire table and deletes all documents. For example, if a user has a folder called (Temp) and that folder has 30 documents and another folder called (Temp2) that also has documents. Now the user wants to delete (Temp). So what I want the query to do is go through the database and delete then entire folder (Temp) and all of its contents associated with it.
Question:How can I traverse through the table to delete the documents?All of your help would be greatfull.
Hi,
How do I find out on which path is the SQl server lisytening to on named pipes when I look at the registry?
Thanks,
Ganesh
Hi all,
Does anyone knows a trick to change the licensing of a SQL server 7 from a Per server to a Per seat Licensing without re-installing SQL.
Thanks,
Joanna
SQL Server 2000
Ran sp_removedbreplication @dbname = 'FooDatabase'
Did NOT want to do that!
Have the replication scripted out
but getting errors when trying to run the script to recreate.
All Push
I tried
sp_droppublication 'Foopubname'
sp_MSload_replication_status
Error 21776: [SQL-DMO] the 'publication name' was not found in the
TransPublications collection. I cannot create a new publication of the same
name.
I need to create a procedure to output mean and deviation AND then I also need to create a trigger. Below is the table 'Account' I made.. but the procedure and trigger I made below that is not correct. Can someone revise this for me? I just can't figure it out.
Here is the 'Account' table I made earlier:
create table Account(Account_Number varchar(6)NOT NULL PRIMARY KEY, Branch_Name varchar(12)NOT NULL REFERENCES Branch (Branch_Name), Balance money)
insert into Account values(10101, 'First Bank', 5500)
insert into Account values(20202, 'US Bank', 3550)
insert into Account values(30303, 'Commerce', 7550)
-------------------------------------------------------------------------
Now I need to output the Mean and Standard Deviation of the above Account. So I tried this code but I'm not sure if its right since when I Analyze it, some values come out as 'null'.
CREATE PROCEDURE project2question2 AS
DECLARE @Mean MONEY
DECLARE @Deviation MONEY
SET @Mean = (SELECT avg(cast(Balance as float)) as mean from Account)
SET @Deviation = (SELECT Balance, STDEV(Balance) st_deviation
FROM Account
GROUP BY Balance)
-------------------------------------------------------------------------
The second question was to create a Trigger that would output the name "Account" and the time of change/update to it. So I had this so far, but I KNOW its not right, so can anyone revise this for me? I basically need to create a trigger named ActionHistory that would have two columns: TableName and ActionTime. They should tie to my Account table so that when it was changed/updated then the name 'Account' would appear under TableName in my trigger, and the datetime of update would appear under ActionTime. But I just can't figure this one out.
Create table ActionHistory(TableName varchar(12) NOT NULL, ActionTime datetime NOT NULL)
CREATE TRIGGER trigger_ex2
ON ActionHistory
AFTER INSERT, UPDATE
AS
BEGIN
UPDATE ActionHistory
SET Account = UPPER(LName) WHERE TableName in (SELECT TableName FROM ActionHistory)
SET Loan = UPPER(LName) WHERE IDN in (SELECT TableName FROM ActionHistory)
-------------------------------------------------------
If someone could give me these codes I would be very grateful. I know you guys are the SQL wizzards. Thanks. (by the way, I use SQL 2000 edition)
- SOnia
Hello Everyone. Im sorry for this urgent post, but have critical issue that needs a solution quick. So for my issue. I am adjusting our sales order tables to handle a couple different scenarios. Currently we have 2 tables for sales orders
SALESORDERS
------------
SORDERNBR int PK,
{ Addtl Header Columns... }
SALESORDERDETAILS
-------------------
SODETAILID int,
SORDERNBR int FK,
PN varchar,
SN varchar(25),
{ Addtl Detail Columns ... }
Currently the sales order line item is serial number specific. I need to change the tables to be able to handle different requests like :
Line Item Request ( PN, QTY )
Line Item Request ( SN )
Line Item Request ( PN, GRADE, QTY )
ETC.
I am thinking i need to create a new table to hold the specifics for a particular line item. Maybe like this :
SALESORDERSPECS
----------------
SOSPECID int,
SODETAILID int FK,
SPECTYPE varchar, IE : SN, PN, GRADE. { one value per row }
SPECVALUE varchar IE : GRADE A
Im thinking i would need to rename the SALESORDERDETAILS table to SALESORDERITEMS. SALESORDERITEMS would just contain header info like
SalePrice,
Warranty,
Etc...
Then rename SALESORDERSPECS to SALESORDERDETAILS...
Anyone understand what im trying to do? If you need more info please ask. You can also get a hold of me through IM.
Thanks!
JayDial
JP Boodhoo is my idol.