Hi,
A few months back i saw a sample rds file where there was a kind of line graph in a table cell
that indicated how much percent a sales person had to the complete sale figure.
But i cannot find the link anymore.
I would like to have such a linge graph next to all my agents that indicates a value againts a total value.
Does anybody has any pointers where i could find that info ?
Greetings
Vinnie
Hi,
I'm working with MRS and I've got a table with a lot of entries. For each value in the table I'm trying to get the text colour to be set to 'red' when the value of the cell is less than 0. Otherwise remain black.
I can do this by setting the colour property cell by cell. But I have a lot of cells in the table. Is there a way to set the statement to apply to ALL cells in the table?
Basically I'm asking if there is a way to set the property in bulk instead of going through tediously cell by cell.
Any help would be much appreciated. Thanks!
Hi!
What I'd like to do is:
UPDATE table1
SET
A_TEXT_COLUMN = (SELECT another_text_column
FROM table2
WHERE table2_id = @precomputed_id_1)
WHERE table1_ID = @precomputed_id_2
Since the cells are text, this does not work. Since the cell to be updated is in an already exitant row, it's not possible to simply use insert.
I'd like to do something like (PSEUDOcode):
WRITETEXT(table1.A_TEXT_COLUMN, READTEXT(@textptr_initialised_to_point_at_target_c ell))
But the *actual* synatx of WRITETEXT and READTEXT seem totally inappropriate for any such trick...
Any hints or pointers HUGELY appreciated... THANX
I have a column defined as smalldatetime. Default length (4), and "allow NULLS" is checked.In the Enterprise Manager UI, when i enter data into that table row, if i just tab past that column, all is well, and the value is represented in the UI as <NULL>.The problem comes once i ever enter a date into that column. Say i have entered a date (all is well), and now i want to remove that entry and go back to NULL (after the date value has been committed, different entry session, say).How is that done?It seems to me, once a date has ever been entered into that column, now, if i try to remove it, i get the error "The value you entered is not consistant with the data type or length of the column, or over grid buffer limit". I have tried deleting the value, entering spaces, entering the string NULL or the string <NULL>; maybe some other tries as well, but none works, i always get that error message and am not allowed to proceed past that cell until i restore a date value to it. I want to get back to <NULL>.Anybody know?Thank you.Tom
View 1 Replies View RelatedI have a report where in I want to show each record on a separate page.
So, to achieve that I took a single cell from table control, expanded it and used all the controls in that single cell. This looks nice so far.
Now, I also have to show a sub grid on each record. So I took a table control and added on the same single cell and tried to add a parent group to the table row.
When I preview, it throws this error.
"The tablix has a detail member with inner members. Detail members can only contain static inner members."
What am I doing wrong? How can I achieve table grouping inside a table cell?
HI,I HAVE AN EXCEL SHEET WITH SOME DATA, I WANT TO IMPORT THAT DATA (CELLBY CELL WITH MANIPULATION) INTO THE SQL SERVER TABLES BY USING STOREDPROCEDURE(IF POSSIBLE).IF ANYBODY HAVE DONE SIMILER TYPE OF JOB OR KNOWING ABOUT IT, PLS. LETME KNOW.THANKS IN ADV.T.S.NEGI
View 4 Replies View RelatedI have a report that has 3 graphs and two tables that render to 5 pages in pdf. Some users should only get a subset of the 5 elements and some need all 5. When I set the Hidden property (in the designer or via a parameter) for any of the elements they become invisible but in pdf but the report still prints out a page for the hidden element. It works fine in the designer and rendered to html and excel but I get an extra page in pdf. it is like the hidden element still takes up the same amount of space but is just hidden.
Any help would be great.
Greg
I'm hoping to create a graph with durations as bar graphs and % met as a line graph. Is this possible in BIDS?
View 1 Replies View Related I'm looking at a system where formulas have been added into fields in a table and I need to look at the field to see what formula to use when selecting eg: eg this + this, this / this etc.Here's a basic table I have knocked up to try different things...
CREATE TABLE #HeaderOrder(
[HeaderCode] [varchar](10) NOT NULL,
[HeaderCode2] [varchar](10) NOT NULL,
[FormulaCode] [varchar](10) NOT NULL
[code]...
Hi,
I need to realize multicolumn cell in table for grouping fields, but i don't know how to do that. Help me please.
1col. 2 col. 3 col.
long text grouping field
first second third
data data data
Thank you.
Hello,
In my .NET.ASP application I generate a random five digit password, like so:
string password = Membership.GeneratePassword(5, 1);
The result could be a password like "0l$IE" and I the save this password to an SQL server. The problem is however that with the generated password five blanks are also added. Instead of "0l$IE" I get "0l$IE ". I hope you understand what I mean? Is there an easy way to correct this?
I appreciate any help!
This is embarasing.I'm creating a 500 line query from XML, CSV's, etc. and I can't fingure this out. I'm building a very complex "SELECT" query and then shoving it into the [Select] column in a SQL 2005 table. I want to call a stored procedure that just "executes" that query and returns the results....Any help would rock.
View 3 Replies View RelatedI am converting a site from asp to .net and the previus writer did something I never saw.(I am somewhat new to programming all together). He put multiple values in a single cell of the database. I have always learned to use a seperate column for each value.
Is this a classic asp thing and there are better ways now? Or is this something I should do myself? The columns type is text and the contents look like this:<Details Expertise="bla bla" Description="We are a three-divisional company ...," WebSite="www.blabla.com" AccountLevel="Free" AccountStatus="Active" WorkHomeZIP="22222" ContractStartDate="01/01/2003" ContractEndDate="12/31/2003"><Address Location="Work" State="Oh" ZIP="22222"/><Email Location="Work" Value=""/><Phone Location="Fax" Code="9801" Ext=""/></Details>
I really want to update just one cell without notify the others in record ,but i can not.
example; my table like this.
ID
Increasingnumber
LastModified
1
15
1/1/1900
i want to modify the "increasingnumber" cell only and also not let "LastModify" cell being updated. Can anyone help me solve this problem?
I'm trying to use DTS to import data from an XLS into a SQL table.It works fine in that it INSERT's the data. However, I need it toUPDATE the table, based upon a ProjectID. Can this be done?Can a DTS package be fired from a SP using parameters?Eg UPDATE tProjects SET MyField1=XLS.Sheet1.CellA1,MyField2=XLS.Sheet2.CellA1 WHERE ProjectID = @ProjectID.Also, it must handle dynamic XLS file names, eg 981-Budget.xls,513-Budget.xls, xyz-Budget.xlsIs this the best way to go? Other suggestions most welcome?Thanks everyone in advance!
View 2 Replies View RelatedHella all,
Is it possible to stack two images on top of each other in a table ?
Let me clarify where i'm going to.
I have a report where in one table i would like to display (in a graphical way) how much a sales person has sold towards
the whole sales amount.
To do so i would like to set my background of my cell to yellow and then use an image (just a green rectangle)
where i adjust the padding according to the percentage.
When i set my background to yellow and i insert my image in the cell, the textbox cell properties disapear and are
replaced with the image properties. So also my background that was defined in my textbox is gone.
Now i was thinking if i could set two images on top of each other (a yellow rectangle and a green rectangle). But when
i do that, one image is replaced with another.
Am i doing something wrong or is there another way to achieve what i want to do?
Greetz
Vinnie
Hello All,
I uploaded custtable under the database, the data looks fine except that the name that apprears has a lot of distance e.g
it should be :
firstname lastname however the format appears very strange:
firstname lastname
firstname lastname
fistname lastname
Same is the case with the address, I need to adjust or format the apperance that appears on the cell. Is there a way/ sql statement to format the data under the table so that the apprearence looks okay.
I will really appreciate any sort of help on this one.
Thanks,
Rashi
need help
condition 1
replace characters on condition in table and cells
but only if
how to do it - if i put * (asterisk) like in employee 111 in day1 - the the upper characters the (A S B)
i replace characters with '-'
and it must work dynamically
condition 2
replace characters on condition in table and cells
but only if
if i put number or 1 , 2 , 3 , 4 above any cell for example( employee id=222 name =bbbb day1)
i replace characters with '0' and '#'
and it must work dynamically
table before the replace
id
fname
val
day1
day11
day111
day2
day22
day222
day3
day33
day333
day4
day44
day444
day5
day55
day555
111
aaaa
2
A
S
B
e
t
y
R
Y
M
j
o
p
111
aaaa
1
*
*
*
*
222
bbbb
2
1
1
222
bbbb
1
A
-
-
-
B
-
333
cccc
2
333
cccc
1
444
dddd
2
3
4
444
dddd
1
-
-
C
C
555
EEE
2
A
G
C
555
EEE
1
*
table after the replace
id
fname
val
day1
day11
day111
day2
day22
day222
day3
day33
day333
day4
day44
day444
day5
day55
day555
111
aaaa
2
-
-
-
-
-
-
-
-
-
-
-
-
111
aaaa
1
null
null
null
null
222
bbbb
2
0
0
222
bbbb
1
#
-
-
-
#
-
333
cccc
2
333
cccc
1
444
dddd
2
0
0
444
dddd
1
-
-
#
#
555
EEE
2
-
-
-
555
EEE
1
null
tnx for the help
Is there any way I can set the background colour for an image in a table cell (or even for a non-embedded image for that matter)? I always seem to get a white background.
It is a GIF image file.
Thanks
What would be an equivalent expression for ISNULL(datafield, 0) for a table/matrix cell? I am using iif( Len().. to find out if there is something in the cell, and displaying zero in the cell if the length of cell item is 0, however am wondering if there is any better/elegant way of doing that?
Hi all
I have two cells,having first cell 0 and other cell 5.
How can i add these two cell values.
I used following expression
=Fields!LITMIN.Value + Fields!NUMMIN.Value
But i am getting Concatenated result ie:05
But i need 5.
How can i do it.Pls help me
Is there any option to set auto fit the cell size of a table in SSRS 2005?
Thanks
Does anyone know if it is possible to have text in a single table cell where the first field is formatted in italics and the second is in normal?
eg: = Fields!firstname.Value(as italic) & " " & Fields!lastname.Value(as normal)?
shidot
Im a beginner here and i have a graph, in the graph I need to show the actual number that the graph is showing can i do this. My graph has numbers that go down the side from 5,000 to 0 in 1000, increments. Say the number is 2234 i need to show thatnumber in that graph somewhere. Can i do that?
Hey guys. I feel like the prodigal son that has returned. It's been while!
In your experience, what is the most like kind of cause to the cpu graph sitting quite high most of the time along with a constant second graph line in red at around the 10% line.
I feel that my aim should be to get rid of the red line alltogether. I've got a few ideas, but I don't know for certain how to target that particular symptom.
Any suggestions?
Hi folks,
I run into problems where some metrics have value associated with dim attributes Markets where some don't have... The graph shows NaN, in the reporting services. Is there a way to get of NaN. something like filter out.
--Imran
Hi everybody,
I've been reading the book MCITP Self-Paced Training Kit (Exam 70-441): Designing Database Solutions by Using Microsoft SQL Server(TM) 2005 (Self-Paced Training Kits) as a part of my preparation for exam 70-441
The book is really clear, and I could understand everything easily because I've some experience as a database developer.
Until now, there's only one thing that I didn't fully understand:
On pages 53 and 54, it mentions a type of hierarchy called: a graph hierarchy, and it gives a small example made the things even more complicated
I've many books about database design theories, but they don't use the term (graph hierarchy) any where...
So, I appreciate if you can point me to an online resource or a book that discusses this term thorougly.
Thank you
Hi,
I have setup a chart with series on right hand side.
The series is from one of the fields.
How is it possible to remove series and instead place each series name on a graph line?
Or at the very least, how can I place a text on each graph line?
Thanks
Hello everybody,
I have a small challenge for you.
I'm developing an application using SQL Integration Services and SQL Reporting Services. I need to have the ability to drill down from a graph created with Reporting Services.
Let me explain: If I have a pie chart, I want to be able to click in one of the slides and see the information details that could be in another graph or in a table.
Somebody know how to do this?
Thanks for your help
I have a simple bar graph. All I am looking to do is display the values on each bar. Can someone please help me. Thanks
View 1 Replies View RelatedGood evening,
View 8 Replies View RelatedHi!
I need to represent a graph in TSQL.
The graph is directed. It is essentially a number of trees which all have various (non-root) nodes in common with each other.
Any ideas or pointers would be most welcome :)
Thanks,
Angelos
Hi,
trying to develop a report that shows the sum total for each month during a specified date range.
I have parameters asking for the start date and end date of the date range, the report needs to show the months in between this date range.
One of the fields in the dataset is durationminutes which I need to sum for each month then divide by 60 to show hours. I then need to show the total of each month in a bar graph (with each month along the x axis).
If anyone can shed some light on how I am going to do this it would be greatly appreciated.
Thanks.