Group Expression Does Not Work

Dec 10, 2007

HI,

I tried to run the following query.






Code Block
WITH YesterdayCTE AS
(
SELECT type = 'Members Joined Yesterday'
, Borrowers = (select count(*)
from LoanApplication INNER JOIN
Member ON LoanApplication.MemberFK = Member.Id AND LoanApplication.Id = Member.LastLoanApplicationFK INNER JOIN
CreditUnion ON Member.CreditUnionFK = CreditUnion.Id
where (LoanApplication.SubmittedOn >= GETDATE()-1) AND (Member.CuStatus = 'Approved')
GROUP BY CreditUnion.Name )
, Depositors = (select count(*)
from CDOrder INNER JOIN
Member ON CDOrder.MemberFK = Member.Id AND CDOrder.Id = Member.LastCDOrderFK INNER JOIN
CreditUnion ON Member.CreditUnionFK = CreditUnion.Id
where (CDOrder.SubmittedOn >= GETDATE()-1) AND (Member.CuStatus = 'Approved')
GROUP BY CreditUnion.Name )

),

MonthlyCTE AS

(
SELECT type = 'Members Joined Last Month'
, Borrowers = (select count(*)
from LoanApplication INNER JOIN
Member ON LoanApplication.MemberFK = Member.Id AND LoanApplication.Id = Member.LastLoanApplicationFK INNER JOIN
CreditUnion ON Member.CreditUnionFK = CreditUnion.Id
where (LoanApplication.SubmittedOn >= GETDATE()-30) AND (Member.CuStatus = 'Approved')
GROUP BY CreditUnion.Name )

, Depositors = (select count(*)
from CDOrder INNER JOIN
Member ON CDOrder.MemberFK = Member.Id AND CDOrder.Id = Member.LastCDOrderFK INNER JOIN
CreditUnion ON Member.CreditUnionFK = CreditUnion.Id
where (CDOrder.SubmittedOn >= GETDATE()-30) AND (Member.CuStatus = 'Approved')
GROUP BY CreditUnion.Name )

),

YearlyCTE AS

(
SELECT type = 'Members Joined Last year'
, Borrowers = (select count(*)
from LoanApplication INNER JOIN
Member ON LoanApplication.MemberFK = Member.Id AND LoanApplication.Id = Member.LastLoanApplicationFK INNER JOIN
CreditUnion ON Member.CreditUnionFK = CreditUnion.Id
where (LoanApplication.SubmittedOn >= GETDATE()-360) AND (Member.CuStatus = 'Approved')
GROUP BY CreditUnion.Name )
, Depositors = (select count(*)
from CDOrder INNER JOIN
Member ON CDOrder.MemberFK = Member.Id AND CDOrder.Id = Member.LastCDOrderFK INNER JOIN
CreditUnion ON Member.CreditUnionFK = CreditUnion.Id
where (CDOrder.SubmittedOn >= GETDATE()-360) AND (Member.CuStatus = 'Approved')
GROUP BY CreditUnion.Name )


),

combinedCTE AS

(
SELECT * FROM YesterdayCTE
UNION ALL
SELECT * FROM MonthlyCTE
UNION ALL
SELECT * FROM YearlyCTE


)

SELECT *
, Members = Borrowers + Depositors
FROM combinedCTE






But I get the following error message.


An error occurred while reading data from the query result set.
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression. (Microsoft Report Designer)
===================================
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression. (.Net SqlClient Data Provider)

Please can anyone help me to make this work?

Thanks

View 7 Replies


ADVERTISEMENT

Getting A Sql Data Base To Work From Expression Web

Feb 13, 2008

Sql date base help 1 do not  now where to start I am trying simple to run the sql database I have in expression web which I built within visual web developer 2005. I thought. I would upload it in with expression web in the website using ftp and it would run on the server. No can anybody help   the web site uses all ASP.NET pages , I have everything tested and working right on my computer, I have three simple data bases I up date through master details forms  pages I run on my computer and not on the server.The data is of names addresses, ex and I display them with a grid view control on the web site pages. I used visual web developer 2005 to do this.And I do not use ASP.NET 2.0 Membership, Role and Profile features. I tested it on a server got a server error connecting to sql server 2005. I think I need sql server 2005 installed on the server and is the sql server 2005 just a program for and to run sql data basesAt this point I’m lost.I do not know how it works Do not know anything about sql data bases other than the above.I need a simple explanation no how to get the sql data base to work on the web site and a quick explanation on how all this works. In the   Recipe: Deploying a SQL Database to a Remote Hosting Environment (Part 1) It said unfortunately there hasn't historically been a super-easy way to accomplish this. Copying the .aspx files and compiled assemblies to the remote system is pretty easy (just FTP or copy them up).  I coped the data base files by ftp but what are compiled assemblies?  The release candidate of a new SQL Server Hosting Toolkit is this, what I need and how do I use it.The toolkit allows you to work with SQL Express, SQL Server 2000, and SQL Server 2005 databases locally and then easily transfer your schema and data and install themWhat is a schema? And how do I use it to setup and recreate the database contents - both schema and data - on the remote hosted site.  Bill
Deploying a SQL data base to a server  have looked at the sql server videos from Microsoft and now can create a fantastic data base but cannot get a simple signal table data base published and running on a sql server 2005. Why is it so difficult to get help or a video or publication from Microsoft on the most important things?  What good is the most fantastic data base if you cannot get it up and running it was the same for a simple piece of script to get an asp web form to post the results of a form as an e-mail took me 3 months to scrap together the script to make it work? How this with the data base. As I have explained do not know the process never down it, first time too build and try to put a data base on a website.
If you publish to sql express all you need to do is ftp it up to the server and it will work I think.
But it’s not so simple with SQL server 2005 it’s much more complicated. So I have installed the new publishing wizard in Microsoft for visual web developer 2005 to help get it running on the server.  This was the simplest way I think. Have three data bases the data bases are so simple as they only have one table each.
Does anybody now of a video or article that explains from the start how to get a simple data base up and running no SQL server 2005 for a beginner that explains in detail the possess.

View 2 Replies View Related

Does Expression Really Work In The Table's Details ?

Mar 9, 2007

Hello all,

I had editted this post to ask a better question.

I had noticed that certain expressions won't work in details. Is this true ?
when I tried using an IIF expression, I always get a blank or an empty field even if it was a text.
could someone clarify this ? I don't know whether it is just me or is it a limitation.

Sincerely,
Bernard Ong

View 5 Replies View Related

Filters &&amp; Expression With String Values, Should They Work??

Dec 7, 2007

Any idea why this expression would not work in SSRS?

Based on a expression on a group textbox I get 0 records that match:
=Iif(Fields!ACCRUAL_CODE.Value <> "A", CountDistinct(Fields!LOAN_NBR.Value), 0)



I've evaluated in the proc & there should be a count of 29 records.

I found a work around by using this in the stored proc & I get my record count:


ACCRUAL_CODE = CASE WHEN BASE.ACCRUAL_CODE = 'A' THEN 0 ELSE 1 END

and changed the expression in SSRS to this & it works:
=sum(Fields!ACCRUAL_CODE.Value)



Is this a known issue with strings? From searching on this site I see that string evaluations are widely used so I do not see why it wouldn't work. I've also see this when filtering the dataset on anything that is a character. Any suggestions?

View 3 Replies View Related

Does The .. Expression In Stored Procedure Work In SSRS 2000 ?

Mar 13, 2007

Hi,

I am not understanding this part of the problem. I am currently reusing a stored procedure that has a ".." as part of the select statement.

I can't put the select statement up here due to privacy but I have found the error where the error states the following:-

Invalid Column Prefix: AM, invalid table name.

I noticed that part of the select statement was the following:-

AM..Field1

I tried executing this stored procedure in the query analyzer and it works fine, but when I tried executing it in SSRS, it gives me the error. After searching through the internet for possible causes, I found out that it was the ".." was giving the error. Anyone knows why ? I found out that it was supposed to bypass any users and permissions to the table.

Thakns !

Bernard

View 1 Replies View Related

Division In A Precedence Constraint Expression Does Not Work Properly - Huh?

Dec 13, 2006

Greetings,

I have an expression in a precedence constraint that is returning false when it should return true. This is the expression that returns false:

((5500 / 9990) * 100) > 10

The following expression returns true. I did the division (5500 / 9990) myself and substituted the resulting value:

((0.55055055055055055055055055055055) * 100) > 10

Why is the first expression returning false? I'm stuck in the mud up to my axles on this and I know I'll probably feel like a fool when I learn the answer...

Thanks,

BCB

View 3 Replies View Related

Any Work Around For 4000 Char Maximum Limitation In Expression

Jul 6, 2007

Hello,



I have to build dynamic sql statement in an SQL task.

The SQL statement is way over 4000 char.

The expression builder complains the length of the expression.



Any work around to this limitation?



Thanks a lot!

View 4 Replies View Related

DateAdd Expression Works In Tsql But Doesn't Work In Ssis

May 9, 2007

Hi There,

I am trying to set a variable with this default value using expression. This works in tsql but doesn't in ssis. Can anybody tell me what is wrong with this?



dateadd("dd", -1, datediff("dd", 0, getdate()))



Thanks.

View 8 Replies View Related

GROUP BY Column-name Problem (need Expression)

Aug 11, 2005

Please advise on how to get the GROUP BY coded in an acceptable way:DECLARE @LO INTDECLARE @HI INTDECLARE @StartDate varchar(10)DECLARE @EndDate varchar(10)SELECT @StartDate = '01/01/2005'SELECT @EndDate = '06/30/2005'SELECT @LO= 250SELECT @HI= 333SELECTStateCD, CountyCD, Zip, Z.CityName, Z.StateCode, Z.CountyName, 'Criteria' = 'JumboRange:' + Convert(varchar(4),@LO) + '-' +Convert(varchar(4),@HI), 'StartingDate' = @StartDate, 'ThruDate' = @EndDate, JumboAmount = SUM(JumboAmount), JumboMortgages = SUM(JumboMortgages), JumboFIXMortgages= SUM(JumboFIXMortgages), JumboFIXAmount = SUM(JumboFIXAmount), JumboARMMortgages = SUM(JumboARMMortgages), JumboARMAmount= SUM(JumboARMAmount)FROM LoanDetails T INNER JOIN dbo.ZipCodesPreferred ZON T.StateCD = Z.FIPS_State AND T.CountyCD = Z.FIPS_County AND T.Zip =Z.ZipCodeGROUP BYStateCD, CountyCD, Zip, Z.CityName, Z.StateCode, Z.CountyName, 'Criteria' = 'JumboRange:' + Convert(varchar(4),@LO) + '-' +Convert(varchar(4),@HI), 'StartingDate' = @StartDate, 'ThruDate' = @EndDate

View 2 Replies View Related

Using An Expression To Group On Multiple Fields

Mar 23, 2008



I have an exisitng report that lists unit name, provider, runday, shift, patient. The report groups by unit name and there is a page break after each unit name. So in the current environment the report prints one page per unit that contains all of the providers, rundays, shifts, and patients for that unit name its grouping on. So the report would like like this when it prints:

Unit A
Provider 1 Runday 1 Shift 1





patient 1
patient 2
Provider 1 Runday 1 Shift 2





patient 1
patient 2
Provider 1 Runday 2 Shift 1





patient 1
patient 2
Provider 1 Runday 2 Shift 2





patient 1
patient 2
Provider 2 Runday 1 Shift 1





patient 1
patient 2
Provider 2 Runday 1 Shift 2





patient 1
patient 2
Provider 2 Runday 2 Shift 1





patient 1
patient 2
Provider 2 Runday 2 Shift 2





patient 1
patient 2
PAGE BREAK
Unit B............(repeat data from page 1)
PAGE BREAK
Unit C............(repeat data from page 1

The end user would like the ability to keep the report as is but would like to also be able to print the report as one page per each unit name, provider, runday and shift. so it would look like this

Unit A
Provider 1 Runday 1 Shift 1





patient 1
patient 2
PAGE BREAK
Unit A
Provider 1 Runday 1 Shift 2





patient 1
patient 2
PAGE BREAK
Unit A
Provider 1 Runday 2 Shift 1





patient 1
patient 2




So I created a boolean parameter with a prompt of Page break by Unit, Provider, Runday & Shift? My thought is if the users sets this to False, the report will group on just Unit Name (the first example). If the user sets this to True, the report will group on Unit Name, Provider, Runday & Shift.

I set the grouping expression for this data table as:
=iif(Parameters!Grouping.Value = "False", Fields!unit_Name.Value,(Fields!unit_Name.Value,Fields!Lname.Value,Fields!Rundays.ValueFields!Shift.Value))


Within the expression editor window it displays a syntax error and the report will not run.

Any help would be greatly appreciated!!!!!!!!!

View 7 Replies View Related

Group Expression That Calculate Percentages.

Mar 8, 2007

I have an expression in a group that calculates percent of sales:

=iif(Sum(Fields!BOOKD.Value)=0,0,IIF(Sum(Fields!NET.Value)=0,0,((Sum(Fields!BOOKD.Value)-Sum(Fields!NET.Value))/Sum(Fields!BOOKD.Value))))*100

The problem I'm having is that if both the

Sum(Fields!BOOKD.Value)=0 and

Sum(Fields!NET.Value)=0 ,

the expression returns the message #ERROR instead of a 0.



I have the initial query set to display 0 if the value is null.

,SUM(ISNULL(R.BOOKD,0))BOOKD
,SUM(ISNULL(R.NET,0))NET



I would greatly appreciate any help on how to solve this issue.

Thank Barb

View 4 Replies View Related

SQL 2012 :: Group By Expression - Outer Reference

Sep 2, 2014

When attempting to pull this query I get this error: "Each GROUP BY expression must contain at least one column that is not an outer reference."

View 1 Replies View Related

SQL Server 2008 :: Using Expression In GROUP BY Clause

Feb 23, 2015

I am working to move an application from MySQL to SQL Server. The person who developed the MySQL application has little database experience, and took some shortcuts that the lax nature of MySQL allows. One query with which I am struggling looks something like this:

SELECT StartTime + Offset, min(Sensor), max(Sensor)
FROM SensorData
WHERE SensorID = @SensorID AND
StartTime + Offset > @BeginTime AND
StartTime + Offset < @EndTime
GROUP BY (StartTime + Offset) / 100
ORDER BY StartTime + Offset

What we are trying to accomplish is to return minimum and maximum sensor values over a number of periods between the BeginTime and EndTime. When I run this query in MySQL on a sample dataset, it returns a small number of rows, with each one being the min/max values for a portion of the overall period.

Under MS SQL Server 2008, SP3, I get the two following error messages:
Column 'SensorData.StartTime' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
Column 'SensorData.Offset' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.

View 9 Replies View Related

Group By Won't Work??

May 30, 2008

can anyone explain why, when i do a group by clause on the following data....it has no effect?
Part          SubPart         Qty
120887     66743             83
120887     66743            100
120887     667443            25
553212     122987           119
553212     122987             67
here's my select statement:
select part, subpart sum(qty) from partdata group by part,subpart,qty
the resulting data looks identical to the original.
what i was expecting was a return of just two lines:
 
Part          SubPart         Qty
120887     66743             208
553212     122987           186
 

View 2 Replies View Related

SQL Server Reporting Services 2005 Group Expression

Mar 8, 2007

I have an expression in a group that calculates a percentage of sales:

=iif(Sum(Fields!BOOKD.Value)=0,0,IIF(Sum(Fields!NET.Value)=0,0,((Sum(Fields!BOOKD.Value)-Sum(Fields!NET.Value))/Sum(Fields!BOOKD.Value))))*100

If there is a 0 balance for both the book dollar and the net dollar the expression returns #Error.

I have made sure that if the value is null it should return a 0 in the initial query.

,SUM(ISNULL(R.BOOKD,0)) BOOKD
,SUM(ISNULL(R.NET,0)) NET



Any suggestions would be greatly appreciated.

View 1 Replies View Related

DISTINCT Or GROUP BY Does Not Work. Help

Oct 17, 2002

I have have a column where there would be some duplicate records, but I have tried using the IN list, DISTINCT, and GROUP BY, and it does not give me distinct record set.

However DISTINCT and GROUP BY will work as long as my columns to display remain only one, but the minute I add more columns to my SELECT statement it does not make them distinct anymore.

Example 1 works, but Example 2 does NOT. In Example 2, I have added more columns otherwise it identical to Example 1. In Example 3, I was using the IN list, but the results of Example 3 is identical to Example 2 !!

EXAMPLE 1:
SELECT DISTINCT email_address AS Email
FROM email_address
WHERE Send = 'y' and (DATEDIFF(DAY, Sent, getdate()) > 30)

EXAMPLE 2:
SELECT distinct email_address AS Email, email_address_ID AS ID, Sent
FROM email_address
WHERE Send = 'y' and (DATEDIFF(DAY, Sent, getdate()) > 30)

EXAMPLE 3:
SELECT email_address_ID AS ID, email_address AS Email, Sent
FROM email_address
WHERE email_address IN (SELECT DISTINCT email_address FROM email_address
WHERE Send = 'y' and (DATEDIFF(DAY, Sent, getdate()) > 30))

View 2 Replies View Related

Domain Group Account Won't Work

Sep 17, 2007

Greetings,

I am trying to configure Reporting Services to allow a domain group access to reports. I am able to configure the domain and group (mydomaingrpname) in both Report Manager and BIDS. I'm sure I entered the correct name because I purposely misspelled it and received an error. I think this tells me it is finding the group correctly.

However, when my test user goes to Report Manager, there are no folders displayed. I checked and he is in the domain group I am using. If I explicitly add him (mydomainandy) to the folders, he can see them and execute the reports.

After searching the forums and other websites, I have checked IIS is using Windows Integrated Security and not anonymous access.

Any ideas?

Rob

View 7 Replies View Related

Group By Doesn't Work Properly

Apr 3, 2008



hi guyz i am trying to trap the duplicate records . cannot trap the below dupes any idea. i also used ltrim and rtrim it still thinking it is a duplicate but it is not. what is the best way doing it.


select count(*) , muzenbr from muzealbums_1 where muzenbr = '1000082' group by MuzeNbr, PNOTES, CNOTES, CAT3, Performer having count(*) > 1


MuzeNbr nvarchar no 14 yes (n/a) (n/a) SQL_Latin1_General_CP1_CI_AS
PNOTES nvarchar no -1 yes (n/a) (n/a) SQL_Latin1_General_CP1_CI_AS
CNOTES nvarchar no -1 yes (n/a) (n/a) SQL_Latin1_General_CP1_CI_AS
CAT3 nvarchar no -1 yes (n/a) (n/a) SQL_Latin1_General_CP1_CI_AS
Performer nvarchar no 510 yes (n/a) (n/a) SQL_Latin1_General_CP1_CI_AS


1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL
1000082 NULL NULL Classical NULL

View 6 Replies View Related

Cannot Get CREATE LOGIN From A Windows Group To Work

Jan 28, 2007

I have created a database fronted by an ASP.Net application. It's all nice and simple, and I only need a very simple level of security (and even that is only as a protection against accidents rather than maliciousness). My intention is that users connect using Windows impersonation (<identity="true">), with the database creator having full access and the public group (I'm talking SQL groups here) having specific premissions granted on specific tables.

If I set <identity="false"> on my XP box the application connects to the database as [MACHINEASPNET]. This is easy to set up access for - I simply do a

CREATE LOGIN [MACHINEASPNET] FROM WINDOWS

and then within the actual database do a

CREATE USER [MACHINEASPNET]

But as I said, I want to use Windows impersonation. When I set <identity="true">, the application correctly attempts to connect as the actual Windows user account (e.g. [MACHINE estuser]). If that user is the user who installed the database, then all is well and it has full access. For anything else, I get a "cannot log on" error - this much I expect.

So I want to permit logins for all other users, and I want this to work regardless of whether the machine is a standalone machine whose "domain" is simply the machine's own name, whether it is in some form of traditional peer-to-peer workgroup, or whether the machine is connected to a real domain. I also want it to work on XP and Windows Server 2003 (and ideally Vista also, but that can wait). When I try the following:

CREATE LOGIN [MACHINEUsers] FROM WINDOWS

I get this error:

Msg 15401, Level 16, State 1, Server MACHINESQLEXPRESS, Line 1
Windows NT user or group 'MACHINEUsers' not found. Check the name again.

Nor does it work with [Everyone] (that one has no domain/folder listed against it in any permissions dialogs on my domainless development PC). So I'm stuck and confused. It's taken me ages just to get this far. Any suggestions anyone?

Thanks in advance.

View 8 Replies View Related

Changing Code Page Property Using Property Expression Doesn't Work

Jun 16, 2006

I am having problems exporting data into a flat file using specific code page. My application has a variable "User::CodePage" that stores code page value (936, 950, 1252, etc) based on the data source. This variable is assigned to the CodePage property of desitnation file connection using Property expression.

But, when I execute the package, the CodePage property of the Destination file connection defaults to the initial value that was set for "User:CodePage" variable in design mode. I checked the value within the variable during runtime and it changes correctly for each data source. But, the property of the destinatin file connection doesn't change and results in an error.

[Flat File Destination [473]] Error: Data conversion failed. The data conversion for column "Column01" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".

[DTS.Pipeline] Error: The ProcessInput method on component "Flat File Destination" (473) failed with error code 0xC02020A0. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.

If I manually update the variable with correct code page and re-run the ETL, everything works fine. Just that it doesn't work during run-time mode.

Can someone please help me resolve this.

Thanks much.

View 5 Replies View Related

Reporting Services :: SSRS Group Total Expression - Add Total Disabled

Oct 26, 2015

For some reason my Add Total is grey out, when i tried to add grand total using some expression.

I have two row & two column groups?

Is there any alternative or how can i enable add total? using expression..as you can see in my Attached Image

I'm using iff condition in my expression.. 

View 15 Replies View Related

URGENT - My Error Or Bug? The Result Of The Expression Cannot Be Written To The Property. The Expression Was Evaluated, But

Feb 8, 2007

Error 3 Error loading MLS_AZ_PHX.dtsx: The result of the expression ""C:\sql_working_directory\MLS\AZ\Phoenix\Docs\Armls_Schema Updated 020107.xls"" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property. c:documents and settingsviewmastermy documentsvisual studio 2005projectsm l sMLS_AZ_PHX.dtsx 1 1


"C:\sql_working_directory\MLS\AZ\Phoenix\Docs\Armls_Schema Updated 020107.xls"

Directly using C:sql_working_directoryMLSAZPhoenixDocsArmls_Schema Updated 020107.xls
as connectionString works

However - I'm trying to deploy the package - and trying to use expression:
@[User::DIR_WORKING] + "\Docs\Armls_Schema Updated 020107.xls"
which causes the same error to occur

(Same error with other Excel source also:
Error 5 Error loading MLS_AZ_PHX.dtsx: The result of the expression "@[User::DIR_WORKING] + "\Docs\Armls_SchoolCodesJuly06.xls"" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property. c:documents and settingsviewmastermy documentsvisual studio 2005projectsm l sMLS_AZ_PHX.dtsx 1 1
)

View 4 Replies View Related

Reporting Services :: Running Value Expression Within Lookup Expression In SSRS?

Oct 28, 2015

I have created 1 report with 2 datasets. This report is attached to the 1st dataset.For example,1st one is "Smallappliances", 2nd is "Largeappliances".

I created a tablix and, the 1st column extracts Total sales per Sales person between 2 dates from 1st dataset (Small appliances). I used running values expression and it works fine.

Now, I would like to add another column that extracts Total sales per sales person between 2 dates from 2nd dataset (Large appliances). I am aware that I need to use Lookup expression and it is giving me the single sales value rather than the total sales values. So, I wanted to use RunningValue expression within lookup table to get total sales for large appliances.

This is the lookup expression that I added for the 2nd column.

=Lookup(Fields!salesperson.Value,Fields!sales_person.Value,RunningValue(Fields!sales_amount.Value,
sum, " sales_person"),
"Largeappliances").

I get this error when I preview the report.An error occurred during local report processing.The definition of the report is invalid.An unexpected error occurred in report processing.

(processing): (SortExpression ++ m_context.ExpressionType)

View 7 Replies View Related

Reporting Services :: Display Group Name Value Of Each Group In Column Header Outside The Group?

Sep 29, 2015

I have an SSRS 2012 table report with groups; each group is broken ie. one group for one page, and there are multiple groups in multiple pages.

'GroupName' column has multiple values - X,Y,Z,......

I need to group 'GroupName' with X,Y,Z,..... ie value X in page 1,value Y in page 2, value Z in page 3...

Now, I need to display another column (ABC) in this table report (outside the group column 'GroupName'); this outside column itself is another column header (not a group header) in the table (report) and it derives its name partly from the 'GroupName'  values:

Example:

Value X for GroupName in page 1 will mean, in page 1, column Name of ABC column must be ABC-X Value Y for GroupName in page 2 will mean, in page 2, column Name of ABC column must be ABC-Y Value Z for GroupName in page 3 will mean, in page 3, column Name of
ABC column must be ABC-Z

ie the column name of ABC (Clm ABC)  must be dynamic as per the GroupName values (X,Y,Z....)

Page1:

GroupName                 Clm ABC-X

X

Page2:

GroupName                 Clm ABC-Y

Y

Page3:

GroupName                 Clm ABC-Z

Z

I have been able to use First(ReportItems!GroupName.Value) in the Page Header to get GroupNames displayed in each page; I get X in page 1, Y in page 2, Z in page 3.....

However, when I use ReportItems (that refers to a group name) in the Report Body outside the group,

I get the following error:

Report item expressions can only refer to other report items within the same grouping scope or a containing grouping scope

I need to get the X, Y, Z ... in each page for the column ABC.

I have been able to use this - First(Fields!GroupName.Value); however, I get ABC-X, ABC-X, ABC-X in each of the pages for the ABC column, instead of ABC-X in page 1, ABC-Y in page 2, ABC-Z in page 3, ...

View 4 Replies View Related

What's Microsoft Doing About Providing Page Numbering Per Group And Total Pages Per Group?

Nov 27, 2007

Hi!

I've posted a feedback with Microsoft to see if we can get them to fix the issue described below, but so far no one from Microsoft has commented to let us know what they're doing about this problem! I'm posting this here to see if maybe we can get more people to rate this feedback or chime in on what a pain it is! Please feel free to add your own comments or how you had to work around this issue and whether or not you think this is something Microsoft should be addressing NOW.


https://connect.microsoft.com/SQLServer/feedback/ViewFeedback.aspx?FeedbackID=311679

Provide Individual Page Numbering per Group and Total Pages per Group

Currently in a Reporting Services report, you can't readily reset the page number for each group in a table, nor can you display the total number of pages per group. For example, if I'm printing invoices and each invoice is a separate group, I'd like to be able to print "Page 1 of 5" , "Page 2 of 5" etc. for the first invoice, then "Page 1 of 3" when the next invoice begins, and so on. This was easy in Crystal Reports. I realize that Crystal Reports has a two-pass process that enables that kind of pagination. However, this is REALLY important functionality that's just missing from Reporting Services and I'm hoping you'll provide it REALLY SOON! Yeah, I know there are work-arounds if you can know exactly how many rows of information there are on each page. But gosh! That's not practical, especially if you have second level groups inside the main group or text blocks in rows that can 'grow' to more than one line. I've read a couple of work-arounds, but none of them works correctly and consistently when more than one user is running the same report or when you print the report while you're looking at it on the screen. I still may need access to the overall report page number and the overall total number of pages, so don't get rid of that. It's just that if you're doing this already for the entire report, I don't see why you can't do it per group! Lots of people have been asking for this for years, and I don't understand why it hasn't been implemented.


I've read a few articles on this topic, but no one has come up with a decent work around. My theory is that Microsoft should be addressing this immediately. This is major functionality that's just plain missing from SSRS and should have been there from the start. If anyone from Microsoft can let us know what's going on with this issue or if anyone would like for me to clarify this further, feel free to let me know.


Thanks!
Karen

View 1 Replies View Related

Reporting Services :: RDL XML To Unmerge Cells In Group BUT Keep Group Drill-In In Excel

Nov 6, 2015

I have an SSRS report with groups that when exported to excel contains drill-in's (plus marks on left side). The issue I have is that for all the groups in the drill-in, those cells become merged. I want to keep the group drill-in but have the cells UNMERGED. I have heard this can be done with the RDL XML but I don't know what to modify to accomplish this. 

View 4 Replies View Related

SQL Server 2012 :: Obtaining A Comma Delimited List For Each Group In The Output Of A Group By Query?

Jan 10, 2014

I'd like to ask how you would get the OUTPUT below from the TABLE below:

TABLE:
id category
1 A
2 C
3 A
4 A
5 B
6 C
7 B

OUTPUT:

category count id's
A 3 1,3,4
B 2 5,7
C 2 2,6

The code would go something like:

Select category, count(*), .... as id's
from TABLE
group by category

I just need to find that .... part.

View 3 Replies View Related

Error 15401: Windows NT Group Or Group Not Found

Sep 25, 2003

I have a user in SQL Server with a NT login of Mike
I changed his NT account to Mikel in User Manager

Now when I try to add Mikel, Im getting error 15401.

Do I need to delete NT login in SQL Server 'Mike' account first ?..before adding 'Mikel' ?

Can I go into the Master database and just change Mike login to Mikel ?

Thank you

View 3 Replies View Related

SQL 2012 :: SSRS Average Column Group Value For Row Group

Feb 28, 2014

I'm having a fight with Reporting Services at the minute when trying to compute an average at the row group level for a value summed in a column group.I have the following column groups:

Year
Month
Date

And the following row groups:

Region
Product
SubType (hidden, data at the date level is summed to Product)

At the moment I'm computing the average for SubType for each Date at the Product level (giving a decimal value), so for each day I end up with a nice average, that works. However I am unable to average that average over the whole Year for a Product. The issue being that I'm trying to combine Row Groups (Product) and Column Groups (Date/Year)

View 0 Replies View Related

SQL 2012 :: Fast Way To Do Group By Count On Items Within Group?

May 1, 2014

select top 15 count(*) as cnt, state from table
group by state
order by cnt desc

[code[...

Can the above three queries be combined into one and still be fast, if so how?What i am trying to go is an item count, by group, similar to ones Inbox in Outlook.

View 9 Replies View Related

Any Way To Show A Group Detail Header Row Once For Each Group In A Table?

Nov 21, 2007

I have a need to show a row inside a table group to simulate a header row for the data rows inside the group. The table will not have a real header or footer. Thanks for the help.

View 1 Replies View Related

Login For Domain Local Group And Global Group

Jan 5, 2008

I have one domoain in the forest. The domain level is set to Windows 2000 native mode and forest level is set to mixed mode. My SQL server 2005 server joined to this domain. I added a brand new domain local group and add a normal user account to this domain local group. I login to the SQL server 2005 server and make a query "SELECT * FROM sys.login_token". I cannot see my domain local group in sys.login_token. However, if I add my account to a global group, I can see it there.

Then, I setup another forest. This time, I have domain level set to Windows 2003 mode and forest level is set to Windows 2003 native mode. I do the same testing. This time, I can see my domain local group in sys.login_token.

Why does SQL server 2005 has this limitation? Is it a bug?

View 1 Replies View Related

Adding A Group By Clause And Getting A Count Of A Group

Feb 6, 2008

HiI am new to SQL and am having a problem. I need to fix my query to do the following...2) get a total of the number of rows returned.
DECLARE @StartDate varchar(12)DECLARE @EndDate   varchar(12)DECLARE @Region    varchar(20)
SET @StartDate = '01/01/2002'SET @EndDate   = '12/31/2008'SET @Region    = 'Central'
SELECTA.createdon,A.casetypecodename,A.subjectidname,A.title,A.accountid,A.customerid,A.customeridname,B.new_Region,B.new_RegionName
FROM  dbo.FilteredIncident AINNER JOIN dbo.FilteredAccount B ON A.customerid = B.accountid
WHERE (A.createdon >=@StartDate  AND A.createdon <= @EndDate)AND   (B.new_RegionName = @Region)AND   (A.casetypecode = 2) 
 

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved