i tried on CTE but iam not gettng correct result plz help me
Declare @TMaster Table (MasterId int, Type varchar(100), ParentMasterId int)
Insert into @Tmaster
Select 1, 'Fixed', 14 Union All
Select 2, 'Flexible',14 union All
Select 3, 'Others',14 union All
Select 13, 'Retirement benefits',1 union All
Select 14, 'PBHeads', 0
Select * From @Tmaster
Declare @TDetails Table ( MasterId Int, Description varchar(100))
Insert into @TDetails
Select 1, 'Basic' union all
Select 1,'Conveyance' union all
Select 1,'HRA' union all
Select 1,'Special Allowance' union all
Select 2, 'Children Education' union all
Select 2,'Travel Allowance' union all
Select 2,'Medical Expenses' union all
Select 2,'Variable Spl Pay' union all
Select 3, 'Project Allowance' union all
Select 3,'Quarterly Incentive' union all
Select 3,'Shift Allowance' union all
Select 3,'Annual Component' union all
Select 13,'Provident Fund' union all
Select 13,'Gratuity' union all
Select 13,'Super annuation'
Select * From @TDetails
in group list we have to show fixed, flexible, other
in subgroups(L1) list under fixed we have to show
Basic salary, HRA, Conveyance, Special Allowance,Retirement benefits
in subgroup(L2) we have to show Gratuity, providedfund, Super annuation they are subgroups of retirementbenefits
output :
Group Subgroup(L1) Subgroup(L2)
Fixed
Basic salary
HRA
Conveyance
Special Allowance
Retirement benefits
Provident Fund
Gratuity
Super annuation
Flexible reimbursements
LTA/Group Travel
Medical expenses
Children education
variable special pay
Others
Project allowance
Performance incentive
Medical insurance
The relationship between state and sales region is n:1, i.e. one state belongs to exactly one sales region, and one sales region can consists of one or multiple states.  Unfortunatly I can't define this attribute relationsship in the dimension because it would lead to a diamond-shaped relationsship without a user-defined-hierarchy to back it up. So far that isn't much of a problem, user don't drill down from sales region to state. But now I want to define a calculated member that multiplies a measure from the main measure group with another measure from a weighting factor measure group at the state level and above. The granularity attribute of the geography dimension in the dimension usage tab of the weighting factor measuregroup is the state.Â
So far what I've got is:
CREATE MEMBER Currentcube.Measures.[weighted measure state and above] AS NULL; SCOPE (Measures.[weighted measure state and above], Descendants(geography.[political territory].[all member],3,SELF_AND_BEFORE), Descendants(geography.[salesterritory].[all member],2,SELF_AND_BEFORE), ... Descendants(geography.[hierarchy 9].[all member],1,SELF_AND_BEFORE)); this = sum(existing(geography.[political territory].state.members), measures.[main measure group measure] * measures.[weighting measure group measure]);END SCOPE;
This works from a functional point of view, but is rather slow when querying any other hierarchy than the political territory hierarchy, because SSAS first goes down from the state level to the key attribute of the geography dimension, and then aggregates from there to the sales region.In other words, I want SSAS to resolve the relationsship (which state belongs to which sales region) through the dimension, and not through the fact, and apply the calculation afterwards. Like some kind of currency conversion, but only from a certain level upwards.
Eg: I have productivity records of each day and each employee. I need to calculate avg of each last level employee productivity by monthly. Again Last level employee productivity avg must be added up with their immediate head. But, when I define a Measure Item as avg in the cube, it sums all the values of lost level employees & head and divides with number of records (normal avg).
My requirement is calculating each head avg by sum of each last level employee avgs / no of employees. If head having value, he too will be added. Again Head’s Avg will be added up immediate head.
The following calculation gives average value at each level.
Average of Level 3(E4) = > (4+3+7+6)/4 = 5 hrs/day< = (E6+E7+E8+E4)/4
Average of Level 2(E2) = > (5+3+5)/3= 4.333 < =avg(Level3(E4))+avg(Level3(E5)))/2
Average of Level 1(E1) = > (4.333+4+1)/3 = 3.111 < = avg(Level3(E2))+avg(Level3(E3)))/2
Formula for average of level : : (Sum of Children value + Head Value of Corresponding children) / (No.of Children +1)
I want to calculate average of each employee as well as average of each level in cube (SQL Server Analysis Services).
I've got a fairly large hierarchy table and I'm trying to put together a query to find the lowest level descendants of the hierarchy. I think there must be some way to use the "Breadth-first" approach that's stated in the MSDN technet sites about SQL Server HierarchyID but i'm not sure how to write the necessary T-SQL to traverse that. I know I can get all the descendants of a parent node like this
SELECT * FROM AdventureWorks2012.HumanResources.Employee WHERE OrganizationNode.IsDescendantOf(@ParentNode) = 1
However, this query returns all levels for that parent's branch. If I just wanted list of employees that were at the lowest level of the branch(es) for this parent node, how would I do this?
I want to perform column level and database level encryption/decryption.... Does any body have that code written in C# or VB.NET for AES-128, AES-192, AES-256 algorithms... I have got code for single string... but i want to encrypt/decrypt columns and sometimes the whole database... Can anybody help me out... If you have Store procedure in SQL for the same then also it ll do... Thanks in advance
When you utilize transactions in ADO.NET are the locks put on the entire TABLE used or at the row level? For instance if you do a SELECT within a transaction if you only pull 5 rows out of a 1000 row table can you just make it lock the rows that have been pulled? It seems like it locks the entire table?
Hi, Can anybody please explain me, what is low level and high level locking in SQL Server 2005 database. Also what is the name of process which converts low level locking into high level locking and vise versa. -Sanjeev
Hi..I'd very much appreciate it if someone would tell me how to translatea statement level trigger written in Oracle to its equivalent (if there isone)in MS SQL Server. Ditto for a row level trigger.If this is an old topic, I apologize. I'm very much a newbie to SQL Server.Regards,Allan M. Hart
HI! I am new in DB so I need some advices for finding the right solution. I need to be able to make automatically any join between tables which the user choose and deliver the result. is like making an hierarchy between all tables in DB (parent-child) and then making the select statement for the right join.
if u have any idea about how can I manage this, pls help me.
I have an Interesting situation that I'm hoping some of you experts can help me with basically I have the following hierarchy:
Net Profit .....Gross Profit ..........Revenue ..........Direct Costs .....Indirect Expense
Now, I have another hierarchy - separate from the above - that I need to assimilate to the hierarchy above - Example:
Expenses .....Node a ..........Child a (Indirect Expense Type) .....Child b (Direct Cost type) Net Sales Adjustments .....Child a (Revenue type) .....Child b (Revenue type)
Depending on the type, the top most node needs to be assigned to the appropriate node in the initial hierarcy, like this:
Net Profit ....Gross Profit ........Revenue ................Net Sales Adjustments ....................Child a (Revenue type) ....................Child b (Revenue type) ........Direct Costs ...........Expenses .................Child b (Direct Cost type) ........Indirect Expense ............Expenses .................Node a .....................Child a (Indirect Expense Type)
Now, I've been able to figure out how to assign the top most node and leafs if all the children have the same type (using the expan stored proc listed in the books online), but my question is on this portion:
Expenses .....Node a ...........Child a (Indirect Expense Type) .....Child b (Direct Cost type)
Basically, the answer is to work backwards - if a child has a type that is different than the other children, a copy of the hierarch (up to the child) needs to be made and assigned to the appropriate initial node.
I've tried modifying the expand stored proc to give me the lineage of the child and see if there's a way I can copy the node and place it appropriately - I'm brainfried at this point, and I'm hoping that someone outthere can point me in the right direction.
Hai everyone., i need to get solution for tree hierarchy in sql is there any solution or any keyword like 'connect by prior' in oracle .. plz help me on this..
for example: id | FName |parentid | 1 | sandy | 2 | robert| 1
if i give the parentid 1 in where condition of a query i need the details of 'sandy'
Hi, I'm trying to figure out how to write I SP on the following table that will produce the results show at the bottom. My main problem is the sorting, is there a way I loop through the records in TSQL and ORDER BY SortSort where the ParentID's are the same?
I also have the following query (again ive stripped out the non-relevant fields)
SELECT TOP (100) PERCENT SUM(dbo.RECORD.Stock_Held_Number) AS TotalStock, CATEGORY.Name AS FundName FROM CATEGORY LEFT OUTER JOIN dbo.RECORD ON CATEGORY.ID = dbo.RECORD.CATEGORY_id GROUP BY CATEGORY.Name, RECORD.Stock_Held_Number
At the moment its grouping all the CATEGORIES and giving me a sum total for each which is great.
The problem I have is the CATEGORY table, there is an optional join to parent CATEGORY records on the table.
What Im trying to do is to provide a fully ordered result within the CATEGORIES and I don't have a clue.
For example:
The CATEGORY table has the following values ID Name Parent_Category_id 1 Pens 2 Animals 3 Rocks 4 Horses 2 5 Dogs 2
When I currently run the query I get: Name TotalStock Pens 20 Animals 30 Rocks 40 Horses 50 Dogs 60
It's technically correct because I don't want the parent to calculate the total value of the children
What Im really trying to do is order them within the hierarchy though and indent (if possible) the result so I would get
I have structure:FolderId, FolderName, ParentFolderId, FullPathe.g.1, First, null, First2, Sec, 1, First/Sec.....When update happens to FolderName, i need to update all FullPaths thatare below Folder which is changing.Any ideas?Thank you.
Greetings!I could really use some suggestions on how to improve on thefollowing, it at all possible:Table 'Customer'---------------------ID GUID PK....Table 'Facility'-----------------ID GUID PKCustomerID GUID FK (FK to Customer GUID)....Table 'Rate'----------------ID PKOwnerID GUID Nullable FK (FK to Customer, Facility GUID PK)OwnerLevel INT Contraint 1-3<Rate Data>Table 'Rate' is a sparse hierarchy of data. There are 3 possiblelevels in the hierarchy as follows:OwnerID <NULL>OwnerLevel 1This indicates Global rate data.OwnerID <Customer.ID>OwnerLevel 2This indicates Customer-specific rate data.OwnerID <Facility.ID>OwnerLevel 3This indicates Facility-specific rate data.Now, a given Customer need not have an entry in the Rate table. If aCustomer does not have an entry, it is supposed to 'inherit' Globalrate data. A given Facility need not have an entry in the Rate table.If a Facility does not have an entry, it is supposed to inheritCustomer-specific rate data, and in the absence of an entry for theFacility's parent Customer, it is supposed to inherit Global ratedata.The challenge is that I want to write a view to give me back theappropriate rate record for Customer and Facility. Here's what I'vedone so far.View _Rate--------------SELECTRate.*,NULL AS TargetIDFROMRateWHERERate.OwnerID IS NULLUNIONSELECTRate.*,Customer.ID AS TargetIDFROMRateCROSS JOINCustomerWHERERate.OwnerID IS NULLOR Rate.OwnerID = Customer.IDUNIONSELECTRate.*,Facility.ID AS TargetIDFROMRateCROSS JOINFacilityWHERERate.OwnerID IS NULLOR Rate.OwnerID IN (Facility.CustomerID, Facility.ID)View view_Rate--------------------SELECT_Rate.*FROM_RateINNER JOIN(SELECTTargetID,MAX(OwnerLevel) AS OwnerLevelFROM_RateGROUP BYTargetID) AS Filtered_RateON_Rate.TargetID = Filtered_Rate.TargetIDAND _Rate.OwnerLevel = Filtered_Rate.OwnerLevelThe combination of these two views gives a resultset that contains 1record for every Target ID as follows:TargetID <NULL>OwnerID <NULL>OwnerLevel 1This indicates Global rate data established at the Global level.TargetID <Customer.ID>OwnerID <NULL>OwnerLevel 1This indicates Customer rate data for the specific Customer identifiedby Customer.ID is inherited from the Global rate data.TargetID <Customer.ID>OwnerID <Customer.ID>OwnerLevel 2This indicates Customer-specific rate data for the specific Customeridentified by Customer.ID (not inherited).TargetID <Facility.ID>OwnerID <NULL>OwnerLevel 3This indicates Facility rate data is inherited from the Global ratedata.TargetID <Facility.ID>OwnerID <Customer.ID>OwnerLevel 2This indicates Facility rate data for the specific Facility identifiedby Facility.ID is inherited from the Facility's parent Customer'sCustomer-specific rate data.TargetID <Facility.ID>OwnerID <Facility.ID>OwnerLevel 3This indicates Facility-specific rate data for the specific Facilityidentified by Facility.ID (not inherited).I know this is a lengthy post, and a complicted query scenario, butI'm not willing to accept that my solution is the best solution justyet. Please consider that I really need this functionality in a VIEWas much as possible.Thank you for your learned consideration.I eagerly await your replies.Darryll
Hi everybody, I've been reading the book MCITP Self-Paced Training Kit (Exam 70-441): Designing Database Solutions by Using Microsoft SQL Server(TM) 2005 (Self-Paced Training Kits) as a part of my preparation for exam 70-441 The book is really clear, and I could understand everything easily because I've some experience as a database developer. Until now, there's only one thing that I didn't fully understand: On pages 53 and 54, it mentions a type of hierarchy called: a graph hierarchy, and it gives a small example made the things even more complicated I've many books about database design theories, but they don't use the term (graph hierarchy) any where... So, I appreciate if you can point me to an online resource or a book that discusses this term thorougly.
Last time I worked with SSAS and build a Cube. Because I€™m now very happy with the front-end excel 2003 or excel 2007 I thought I build my own Report with SSRS. Now there is something I don€™t understand: I build a Hierarchy in SSAS that a want to use in SSRS. Is there a chance to use it without any features? Have I to use parameters or something another? In my opinion it makes any sense to build a hierarchy new, because it€™s already exists in SSAS.
I'm facing a complicated problem and I don't think that the solution will be an easy one.
I have an SQL statement in Oracle which I need to translate it in Sql Server 2005.
select lpad(' ',5*(orderid)) || to_char(descr) as menui from <table _name> where MENU_ITEM not in ('test1','test2','test3') and item_parent not in ('test4,'test5,'test6') start with <item_parent='item_parent' > connect by prior <menu_item = item_parent and menu_name='something'; > ?(condition)
Somewhere I have read that SQL server does not support Hierarchical Sql statements. Is this true ? How am I going to do that ?
And I specify that I want all child items below the Id 2, it must return: Id | Title | Url | ParentId | Depth 2 | Sub-Test | http://localhost/subtest | 1 | 0
I have a table with a parent, child, and grandchild relationship. Can anyone help me with a query that will return the child and grandchild of a parent? Heres my table:id pid name--------------------------------1 0 UntID2 0 Vin Number3 0 Make4 3 Model5 4 Model Number6 0 Model Year7 0 Vehicle Type8 0 Odometer MilesWhen I select 3 as the id I need these results:id pid name--------------------------------3 0 Make4 3 Model5 4 Model Number
For a short time I have considered how to get the hierarchy in a self-linked table, incidentally I have found an article about ‘Recursive CTEs’ in ‘SQL Server Books Online’, where an example is very impressive and arouses me to find a way to get the ancestors or descendants of a given node in a self-linked (self-referenced) table.
And now I want to share this method to anyone who has the same problem to resolve or someone like me who has addiction in SQL.
First of all we have to create a table for the following functions and build some test data. The statemens look like:
insert into ST_CATEGORY(CATEGORYID, PARENTID, [NAME], COMMENT) values(NEWID(), @rootoid, 'Business Application', 'group for all business applications')
declare @techoid uniqueidentifier set @techoid = NEWID()
insert into ST_CATEGORY(CATEGORYID, PARENTID, [NAME], COMMENT) values(NEWID(), @techoid, 'C#', 'C# tips') go
Now that the test table and data are prepared, we can get ancestors or descendants through the following four stored procedures of a given category.
CREATE PROCEDURE spGetAncestor @categoryID uniqueidentifier AS BEGIN -- find parents/ancestor WITH Ancestor( CATEGORYID ) AS ( SELECT PARENTID FROM ST_CATEGORY WHERE CATEGORYID = @categoryID UNION ALL SELECT PARENTID FROM Ancestor, ST_CATEGORY WHERE Ancestor.CATEGORYID = ST_CATEGORY.CATEGORYID ) SELECT * FROM Ancestor END GO
CREATE PROCEDURE spGetSelfAndAncestor @categoryID uniqueidentifier AS BEGIN -- find self and parents/ancestor WITH SelfAndAncestor( CATEGORYID ) AS ( SELECT CATEGORYID FROM ST_CATEGORY WHERE CATEGORYID = @categoryID UNION ALL SELECT PARENTID FROM SelfAndAncestor, ST_CATEGORY WHERE SelfAndAncestor.CATEGORYID = ST_CATEGORY.CATEGORYID ) SELECT * FROM SelfAndAncestor END GO
CREATE PROCEDURE spGetDescendant @categoryID uniqueidentifier AS BEGIN -- find children/descendant WITH Descendant( CATEGORYID ) AS ( SELECT CATEGORYID FROM ST_CATEGORY WHERE PARENTID = @categoryID UNION ALL SELECT ST_CATEGORY.CATEGORYID FROM Descendant, ST_CATEGORY WHERE Descendant.CATEGORYID = ST_CATEGORY.PARENTID ) SELECT * FROM Descendant END GO
CREATE PROCEDURE spGetSelfAndDescendant @categoryID uniqueidentifier AS BEGIN -- find self and children/descendant WITH SelfAndDescendant( CATEGORYID ) AS ( SELECT CATEGORYID FROM ST_CATEGORY WHERE CATEGORYID = @categoryID UNION ALL SELECT ST_CATEGORY.CATEGORYID FROM SelfAndDescendant, ST_CATEGORY WHERE SelfAndDescendant.CATEGORYID = ST_CATEGORY.PARENTID ) SELECT * FROM SelfAndDescendant END GO
Ok first I am still very new to SQL so I really do not understand quite a bit (SP's, Sub Query's,CTE, etc..). I also went through the SQLTeam article on trees and hierachies but only confused myself even more.
I will try my best to put all the information that I know of (in the shortest way that I know).....sorry I know this is long :(
SQLExpress2005 SQL Server Management Studio Express
Two Tables
PartMaster PRTNUM_01.......varchar(30) ////Part Number PMDES1_01.........varchar(50) ////Primary Description PMDES2_01.........varchar(50) ////Secondary Description
ProductStructure PARPRT_02........varchar(30) ////Top Level Part Number COMPRT_02......varchar(50) ////Component Part Number EFFDTE_02.........smalldatetime //// Effective Date QTYPER_02.........float ////// Quantity
I have gotten Close but no cigar with the following:
SELECT ps.PARPRT_02, ps.COMPRT_02, pm.PMDES1_01 + ' ' + pm.PMDES2_01 as Description, ISNULL(ps2.PARPRT_02, 'n.a.') AS [Sub Component], ISNULL(ps2.COMPRT_02, 'n.a.') AS [Part Number of Sub], ps.EFFDTE_02, ps.QTYPER_02 FROM ProductStructure ps INNER JOIN (SELECT COMPRT_02, MAX(EFFDTE_02) AS EFFDTE_02 FROM ProductStructure WHERE (PARPRT_02 = '4235') GROUP BY PARPRT_02, COMPRT_02) AS p3 ON ps.COMPRT_02 = p3.COMPRT_02 AND ps.EFFDTE_02 = p3.EFFDTE_02 Inner Join PartMaster AS pm On pm.PRTNUM_01 = ps.COMPRT_02 LEFT JOIN ProductStructure ps2 ON ps2.PARPRT_02 = ps.COMPRT_02 WHERE ps.PARPRT_02 = '4235' ORDER BY ps.PARPRT_02, ps.COMPRT_02
Line 1 - fine / Line 2 - fine / Line three (need to add description Part number of Sub)(need to keep original) / Line 4 and 5 same as line 3 / Line 6 and Line 7 should not show because the later date has a QTY of zero / Line 9 should not show because date is zero.
I once again appologize for the length and details on this , but this is has been driving me nutts. ANY help will be appreciated.
how to create a hierarchy using SQL. I have a database with ID numbers that are duplicated based on customer preferences. For example, an ID number can fall into multiple categories
ID# 001 in section A ID# 001 in section B ID# 001 in section C
The same ID Number is in section A, B and C.The hierarchy is that A is at the top and C is at the bottom. So, if my ID number is in all 3 sections (A, B & C) I only want to count it as falling into section A as that is at the top of the rating scale.
This structure requires complicated queries (recursive call) to find out all the child of a root node, so I have added another field for the root id. Is this a good relational database design ? kindly suggest.
My problem is that my:hustyp)[1] only fetches the first occurace of this tag. In my xmlfile this field is a repeating table created in infopath 2007. How do I manage to get the rest dynamically.
------T-SQL for fetching data from XML datatype------ WITH xmlnamespaces('http://schemas.microsoft.com/office/infopath/2003/myXSD/2007-01-15T13:29:33' AS my) SELECT FormData.value('(/my:xxx/my:Formular/my:group1/my:group2/my:hustyp)[1]', 'varchar(99)') AS IdFastBet FROM MinaDekl CROSS APPLY FormData.nodes('(/my:xxx/my:Formular/my:group1/my:group2/my:hustyp) as TempTab(testTab1) -----------------
