Is it possible to host more than one site on the server that hosts reporting services?We have a web app that is accessed through intranet. This site is hosted (IIS)on the same server as the sql server 2005 database that is used as the backend. Is it possible to run reporting services from this same server? or does the reporting services default site require to be the only site hosted?
I installed SQL reporting services 2005 and successfully configured reporting services.After designing the report using Bussiness Intelligence Studio, i tried to deploy my reporting services application to the localhost , I got the below mentioned error :
TITLE: Microsoft Report Designer
------------------------------
A connection could not be made to the report server http://localhost/ReportServer.
------------------------------
ADDITIONAL INFORMATION:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. (Microsoft.ReportingServices.Designer)
------------------------------
The request failed with HTTP status 404: Not Found. (Microsoft.ReportingServices.Designer)
Can anybody provide a solution for this issue....
Thanks in advance
Nirupa
hi all. my question is simple: can i have 1 sql data base for multiple sites?
View 3 Replies View RelatedI am trrying to figure out what the best replication would be to use and or setup...
Her eis the current goal and structure..
We are just moving over to a new custom POS system that will be using SQL databases....We have have three locations and we want each location to be independent in case of network connectively failures to our primary location.
Basically, all three locations will be running SQL server 2005 and the POS app...
We want replication to occur overnight, so that each location will have the other locations transactions from the previous days, etc...
Essencially I want all three locations to "syncronize" their data every night....basically two-way replicaiton between all three sites...
Master Site will have say databaseA that the local POS system will use
Sencond Site will have say databaseA that the local POS system will use as well
Third Site will have say databaseA that the local POS system will use well...
Any thoughts or Ideas will be helpful
Thx
Martin
Hello all, I am in the process of doing some research and thought I would query you guys (and gals) for your opinions. I have never setup replication and my company is bringing up multiple sites, multiple GIS servers with one master GIS server. They want them to be replicated. Network bandwidth throughout the day is a concern and I may have an option to run replication at night. All servers will be continuously connected and they tell me that each site will be owners of it's data so data conflict should not be an issue. I originally thought qued-updating subscribers and transactional replication but it sounds like that does not work if the servers will always be connected. Any opinions on this anyone? Also, keep in mind that this is GIS data so there will be pretty big blob files in the database. Thanks in advance. RayH
View 1 Replies View RelatedHow does database connection pooling work for multiple "copies" of the same web application on the same server? My IIS 5 win2K server has 32 sites, all pointed to the same code. Each site responds to a different IP/URL(www.a.com, www.b.com, etc.) for SSL reasons. DB is SQL 2000.
Based on perf stats, as a new site spins up, a new pool is created. So when I hit site 1, I see 10 pooled connections. Site 2 bumps it up to 20, etc. However, I don't see it go up to 320, so it isn't linear.
BTW, I'm trying to build a case for having 1 site/application that all URL's point to in order to conserve memory, connection pooling, caching, etc.
Any help is greatly appreciated.
-Allen
I have successfully installed the reporting services in SQLServer 2005 and have integrated with WSS 3.0. When I go to a site to add in the Viewer web part it is not there. Any ideas?
View 6 Replies View RelatedCan I create reports with Crystal Reports and Deploy them in SSRS?
Thanks in advance,
saied
Hi all
I have SQL 2000 SP4 running on a W2K server SP4.
The server acts as a subcriber and publisher and acts as its own distributor.
Each publication uses its own distribution agent and is set to loop.
There are 4 queued updating subscriptions on this box.
When running 3rd party tools to determine open active ports, the replication executables (distrib and logreader) are connecting to local server multiple times. Easily 15+ established connections plus many more waits.
Everything connects to 1433 then opens a new port.
Is this because of the queued updating?
Replication is functioning as it should without any problems.
I even checked our 2 main distribution servers which only act as distributors and there is not one connection from replication to itself.
Any insight would be appreciated
Thx
John
I would like to know if it is possible to have different applications on separate report servers sharing one report server database. If so are there possible issues or ptfalls to this type of architecture?
Thanks,
thecoleman
Can any one pls gime list of sql server websites similar to SWYNK.
also pls gime some good sql server links for diccussion groups.
Thanks in Advance
Kinds regards
sk
I am wondering how people maintain their SQL Servers which run at several customers sites and disk space is getting smaller and smaller? I want to say that we have tables in SQL dbs which hold a lot of date consisting of statistics, errors, logs etc.
They grow and grow and existing data is not needed anymore as soon as the data get older than let's say for one year. How do you overcome the problem reducing the tables but not charging the system too much as the major application also runs on the same server?
Thanks for any input
mipo
I want the sites for ASP.NET 2.0 and SQL SERVER 2005 interview questions.
2) Sites for SQL SERVER 2005 concepts
All,
Is there a way to simulate hosting three environments on one Report Server. Due to resource limitations, I would like to set up three environments DEV, TEST, STAGE on one report server such that the data source for each environment would be different. Can I use a different folder structure for each and then deploy the reports by providing server url accordingly?
e.g.
http://servername/DEV_Reports or should it be (http://servername/ReportServer/DEV_Reports)
http://servername/TEST_Reports
http://servername/STAGE_Reports
and then in each of the above define a datasource that has connections to appropriate database on db server. Can we do something like this?
Thanks.
Greetings... I'm working at consolidating several Reporting Services installations into one so we can decommission some old servers. We have two Report Servers that are in SQL Server 2000 and three that are in SQL Server 2005 (none are in a web farm configuration). I can upgrade the 2000 databases to 2005 format just fine, but now how do I merge these five ReportServer/ReportServerTempDB databases into one? I'm reluctant to redeploy reports to the "official" Report Server because we lose security, subscription, and scheduling information by doing that. So redeploy would cost us time and data loss over hundreds of reports, thus my hope to merge the databases at a data level. Is there a tool to automate this process, or has anyone tried this before? Thanks in advance.
Austin
I am in the process of creating a Report, and in this, i need ONLY the row groups (Parents and Child).I have a Parent group field called "Dept", and its corresponding field is MacID.I cannot create a child group or Column group (because that's not what i want).I am then inserting rows below MacID, and then i toggle the other rows to MacID and MacID to Dept.
View 3 Replies View RelatedHi all,
I want to use 2 stored procedures in one report, but I could not find what is the way of doing this. I searched this subject on the intrernet, and I found some solutions. However, they used stored procedures in one stored procedure and used in one report. This is not the thing which I want to do, I want only do using 2 stored procedures in one report at the same time.
Thanks, for now...
I'm trying to create an email report which gives a result of multiple results from multiple databases in a table format bt I'm trying to find out if there is a simple format I can use.Here is what I've done so far but I'm having troble getting into html and also with the database column:
EXEC msdb.dbo.sp_send_dbmail
@subject
= 'Job Summary',
@profile_name =
'SQL SMTP',
[code]....
At work, we are in the process of moving a server running SQL Server 7 from one domain to another. A part of this domain change will necessitate that the server be renamed. In a couple of tests that we ran we found that changing the domain does not cause problems, but changing the server name does. How does one register the databases with the new server name without reinstalling everything from scratch?
Any assistance would be greatly appreciated as we are under a time crunch here. Please reply to my email as I am unable to check this board often.
Thanks,
Mike Sinnott
I have change the name of my host by "network neighborhood"
and user sp_dropserver and sp_addserver.
But when rebooting the host, I have this following message.
"Your SQL Server installation is either corrupt or has been
tampered with (unknown package id). Please run setup."
But I change the name of the hostanme to the former name, there
is no error.
Please, can you advise me something ?
VPC Host: Vista 64Bit
VPC Guest: Win2K3 (32Bit)
VPC is configured to use the wireless card on the host.
Firewalls on both systems are completely disabled.
Machines can ping each other.
Both machines can access the Internet.
I can browse the SQL Reporting Services Web Site on the Host from the Guest.
Host SQL Install has remote connections enabled.
If I browse for Network server from teh connect dialog on teh Guest, it finds the Host.
Why can't I connect to the Databse Engine on the Host from the Guest?
I have tried both TCP/IP and Named Pipes and both show a connection failure. (Not a login failure)
If it matters, the Guest OS also has a SQL Database Engine running. But I don't know why that would stop me from connecting to a remote instance.
And suggestions would be appreciated.
Thanks.
J
I don't know why my application on the internet try to access the SQL Server 2005, when the host still having the 2000 edition. I put the following connection string:
Data Source=##DBSERVER##;Initial Catalog=##DBNAME##;User ID=##DBUSER##;Password=##DBPASSWORD##;
Isn’t everything fine with that? I created the table by host but dosen’t work. I’m wondering if can I conect straight with Data Base, without register in the server, like with mdb?
This is the error that I’m getting.
When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I have a page that connects to SQL server. It works fine when running in local host but when I publish to the server, I get the following: An error has occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact that under
the default settings SQL Server does not allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Any ideas on where to start? Thanks,Mark
Issues on Changing Name of our SQL Server Host
Michael G (m1g@hotmail.com)
We are going to rename the Server machine Host Name that our SQL2000
(named instance) Server now resides on.
* I am searching for all references in Operating System items, such as .cmd, .bat. ftp files referring to it (eg., sqlservNM)
* I am searching for all references in Operating System items, such
as ODBC, VB ADO, DOA and DSN-less connections that refer to it.
These references will be changed manually on the day of the change.
I am NOT so certain that I need to search for all SQL Server Objects referring to it, (eg., DTS packages and scheduled Jobs). Must these
objects be changed manually or will they be redirected somehow?
Anyone with any experience on this?
Thanks,
Michael
I understand that for SQL Server rtrim is not needed in where clause equates because SQL Server
automatically trims the spaces. Is rtrim necessary when comparing to a host variable since rtrim is a deterministic function? It it needed in the following example
Select ....
where
TEXT = rtrim(:I--HV-001)
TEXT is a varchar column in the SQL Server database and it is getting compared to the host variable.
I'm creating an app and have SQL Server 2005 Express installed. Most of the hosts now offering SQL Server 2005 are a bit pricey compared to those only offering 2000. Will I have any difficulty uploading my site and running the db on SQL 2000? Thanks in advance.
View 3 Replies View RelatedHow do I display multiple parameter values on report page from a multi-value report parameter. For example, I have a report parameter where users can select multiple attendance codes and I want them displayed at the top of the report after it's run.
Currently, only the first value is showing on the report.
Thanks.
I am trying to use the new Common Language Runtime (CLR) hosting feature to write stored procedures in C# i have addedMicrosfot.sqlserevr.server name spaceand ia m trying to use sqlContext Object as below
using (SqlConnection connection = new SqlConnection(dbConn)) { connection.Open(); SqlCommand sqlcmd = new SqlCommand("select @@ version", connection); SqlContext.Pipe.ExecuteAndSend(sqlcmd); }
i get the below error when i execute (SqlContext.Pipe.ExecuteAndSend(sqlcmd);)
System.InvalidOperationException was unhandled by user code Message="The requested operation requires a SqlClr context, which is only available when running in the Sql Server process." Source="System.Data"
i checked if (SqlContext.IsAvailable) and it returns false as well.
Please le me know how to make it work.
Thanks
THNQDigital
I am trying to deploy my database-driven ASP.NET application to my web server. I have hosting through godaddy.com and they require that you run a script through their SQL admin Query Analyzer to create the database. After I attach the database in the Management Studio, I generate the script, copy and paste it into the QA and get the following error. Any help?Error -2147217900
Line 18: Incorrect syntax near '('.SET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOIF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Students]') AND type in (N'U'))BEGINCREATE TABLE [dbo].[Students]( [StudentID] [int] IDENTITY(1,1) NOT NULL, [FirstName] [nvarchar](20) NULL, [LastName] [nvarchar](20) NULL, [PhoneNumber1] [nvarchar](15) NULL, [PhoneNumber2] [nvarchar](15) NULL, [Instrument] [nchar](20) NULL, [Interests] [nvarchar](50) NULL, [Active] [bit] NULL, [TimeID] [int] NULL, [UserID] [nchar](20) NULL, CONSTRAINT [PK_Students] PRIMARY KEY CLUSTERED ( [StudentID] ASC)WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF) ON [PRIMARY]) ON [PRIMARY]ENDGOSET ANSI_NULLS ONGOSET QUOTED_IDENTIFIER ONGOIF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Lessons]') AND type in (N'U'))BEGINCREATE TABLE [dbo].[Lessons]( [LessonID] [int] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL, [CurrentNotes] [nvarchar](250) NULL, [FutureNotes] [nvarchar](250) NULL, [DateTime] [datetime] NULL, [StudentID] [int] NOT NULL, CONSTRAINT [PK_Lessons] PRIMARY KEY CLUSTERED ( [LessonID] ASC)WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF) ON [PRIMARY]) ON [PRIMARY]ENDGOIF
NOT EXISTS (SELECT * FROM sys.foreign_keys WHERE object_id =
OBJECT_ID(N'[dbo].[FK_Lessons_Students]') AND parent_object_id =
OBJECT_ID(N'[dbo].[Lessons]'))ALTER TABLE [dbo].[Lessons] WITH CHECK ADD CONSTRAINT [FK_Lessons_Students] FOREIGN KEY([StudentID])REFERENCES [dbo].[Students] ([StudentID])ON DELETE CASCADEGOALTER TABLE [dbo].[Lessons] CHECK CONSTRAINT [FK_Lessons_Students]
I have a application which uses the automatic asp.net membership stuff to make it work. (In app_data). It works fine on local host, but when I use it on the web server I get the error message (after clicking the log in button):An error has occurred while establishing a connection to
the server. When connecting to SQL Server 2005, this failure may be
caused by the fact that under the default settings SQL Server does not
allow remote connections. (provider: SQL Network Interfaces, error: 26
- Error Locating Server/Instance Specified) Please help me fix this. Thank you for your help,Sam
(i am not sure which forum to post this too)
Hi, I imported a table onto my host's server, table_Login which has username password, and userID. userID is Primary Key & identity.
When I had my code do insert of new user, I was getting error the Login.userID doesn't allow null values. Which shouldn't have mattered because userID is an identity.
After making a diagram from Enterprise Manager, I noticed that I have two Login tables (although only one shows in Enterprise Manager's "Table" node view. The second table, which had none of the constraints that my table of the same name which is listed under the "Table" node does; appears to be the table which is being written to by my code.
I can't find this table, Login(dbo), through Enterprise Manager, nor am i sure how to access it through Query Analyzer. Needless to say, I don't like this arrangement. and well tech support for this host seems to leave a lot to be desired.
Anyone know what needs to be done so that I can fix it or fight with tech support to convince them that they should?
Hi,after i exported my DataBase From my local computer to host, all tables and views have exported, but my tables Realations dosent exported and i have'not any realation in my database, i can't create new realation , when i want to do this i get an error:" You do not have sufficient privelege to create n new database diagram" What this mean??how i can export my database to my host whit my realations?plz help me i you can!thanks.
View 6 Replies View RelatedI have a web app and database created in sql server 2005 express. In addition to using the membership and role providers I have added custom tables and stored procedures to my db. When I try to export this with Sql Server Management Studio (not the express version) to my db on my shared host(sql server 2005) the custom tables and stored procedures are not transferred.
How can this be accomplished?
Thanks in advance.