How Can I Get Vb6 To Update Offline Recordset When View Has Defined An Attribute As AdFldUnknownUpdatable?
Aug 21, 2006
hopefully, someone has already solved this problem
I have been assigned an application that maps data from access databases into a view in Sql Server 2005. A vb6 application does a select on the view. The recordset is then modified by the application, and eventually, the original tables will be updated with the new data. Some of the fields in the view are the result of calculations ( i.e. adding multiple varchar fields together to produce one complex varchar result ). Any of the fields that are calculated in the manner previously described have the adFldUnknownUpdatable bit set in the attributes of the recordset, and consequently, you get a -2147217887 error ( multiple-step operation .... ) when you try to change the value of the field in the recordset. Does anyone know how to get around this problem?
View 1 Replies
ADVERTISEMENT
Mar 26, 2006
The application is running ADO (MDAC) version 2.81.1117.0.
The application gets an recordset created by SQLServer by an select statement. In this case the recordset is empty.
The application adds a record to the recordset by AddNew(). Works fine. But when assigning the first field (smalldatetime in database) I get ADO error -2147217887.
I have inspected the recordset and I found a difference between the working one from SQLServer2000 and the new one from SQLServer2005: The Attributes item for the fields in the recordset has the flag adFldUnknownUpdatable set in the working SQL2000 version but is not set from SQL2005.
The database on SQL2005 is copied from the SQL2000 system and attatched to the SQL2005 system. I Have checket that the compability flag for the database on the SQL2005 system is set to SQL2000 compability.
Nils Nordenbrink
Winkonsult AB
Sweden
View 4 Replies
View Related
May 27, 2008
Hello Everyone,
I am creating a Metadata management application for a business intelligence platform on SQL Server 2005.
For this purpose, I've set out to consolidate all DB-object metadata (Databases, Tables, Columns, Views) into a single repository that business users can browse through. It has been fairly straightforward so far, but I've hit a wall in the views department.
In fairly simple terms, I want to know which physical columns are selected in a view, with the twist of also knowing the columns' alias. This seems to be impossible as far as I can tell, it is easy enough to get both of these independently, but I can't figure out how to connect an alias to an actual column.
(I prefer to use the metadata catalog views to the INFORMATION_SCHEMA as I need to know the object_id's)
Aliases are easy enough to obtain:
select object_id, column_id, name
from sys.columns
where object_id = object_id('SomeViewsName');
As are the 'physical' columns:
SELECT
t.object_id as TABLE_OID,
c.column_id as COLUMN_OID,
c.name
FROM
sys.views v
JOIN sys.sql_dependencies d
ON d.object_id = v.object_id
JOIN .sys.objects t
ON t.object_id = d.referenced_major_id
JOIN sys.columns c
ON c.object_id = d.referenced_major_id
AND c.column_id = d.referenced_minor_id
WHERE
d.class < 2 AND
v.name = 'SomeViewsName';
As I've said before, the problem is joining these two datasets. One of the problems associated with this is that the latter query also returns columns used in JOIN statements, even if they are not projected in the select part of the view definition.
Ultimately I'd like to get this result:
Alias used in View, physical table's object id, physical column's id
Am I missing something?
Thank you very much in advance for your help.
View 3 Replies
View Related
Jul 20, 2005
Could someone help me by answering the questions below?What's a cursor?What's difference between Query and View?Is a RecordSet just part of a table? Can it be part of a query of view?If the content in a table changed, is it necessary for a old recordset torenew itself by do "Requery()"?Thanks for your help!
View 4 Replies
View Related
Jul 29, 2004
Hi All,
How can I link a view into MS Access from MS Sql Server, that I can update as a tabble.
Thanks
Laszlo
View 3 Replies
View Related
Aug 22, 2007
I've a view in which one of the fields were DATEDIFF(day,contract date,received) AS AgeOfAccount. I changed it to DATEDIFF(day, m.received, CASE WHEN m.clidlp > m.clidlc THEN m.clidlp ELSE m.clidlc END) * - 1 AS AgeOfAccount. When I execute the view I'm getting an error. But the results are getting displayed properly. That's what's puzzling me. Could someone tell me what the error is.
The following errors were encountered while parsing the contents of the sql pane.
Your entry cannot be converted to a valid date time value.
View 4 Replies
View Related
Apr 10, 2007
Hi, I am relative newbie to SQLServer. When I try to take a user database offline, the query "hangs," with the query processing circle spinning. The Sharepoint 7 application is running on top of the Enterprise SQL Server 2005 db with several logins sleeping and awaiting commands. No errors are generated until I kill the offline command. Anyone have any ideas? Do I need to kill all the connections?
View 2 Replies
View Related
Nov 27, 2006
Hi! A question just struck me that I cannot test right now (don´t have vs2005 on this computer)...Is it possible to add a database-field value to an Xml-Source object attribute?
For instance <Object id=1 name="void" description="" /> is my souce xml... in this case I want to replace the description attribute value (string.Empty) with a value from my db... can this be done?
Regards
Erik B.
View 1 Replies
View Related
May 19, 2004
I want to add a record and then get the automatically generated identifier(ReqChildID in this case). Is there a better way? Why won't this one work.
This is what I have:
rsRec.AddNew
rsRec("RequisitionID") = intReqNum
rsRec("CreatedBy") = cint(session("empno"))
rsRec("DateCreated") = Now
rsRec.Update
intItemId = rsRec("ReqChildID")
rsRec.Close
Forgive me if this has already been posted, but I couldn't find it.
[edit to add:]
rsRec is an ADODB.Recordset in case that wasn't clear.
View 10 Replies
View Related
Feb 9, 2007
Hi,
I am converting a VB6 application to C# using ADO. I have the following code:
private ADODB.Connection cn = new ADODB.Connection();
private ADODB.Recordset rs = new ADODB.Recordset();
private connectionString = "Provider=Microsoft.Jet.OLEDB.4.0; Data source= " + stdDir;
strClientSQL = "SELECT * FROM Client ORDER BY casename, renldate, product, fundingcode";
cn.CursorLocation = ADODB.CursorLocationEnum.adUseClient;
cn.Open(Utilities.connectionString,null,null,0);
rs.CursorLocation = ADODB.CursorLocationEnum.adUseServer;
rs.Open(strClientSQL,cn, ADODB.CursorTypeEnum.adOpenStatic, ADODB.LockTypeEnum.adLockOptimistic,-1);
rs.Fields["CaseName"].Value = this.txtCaseName.Text;
rs.Fields["CaseNo"].Value = this.txtCaseNumber.Text;
rs.Update();
When I try to compile and run it I get the following error message:
"No overload for method 'Update' takes '0' arguments"
I am not sure if I need to enter information in the update command or do something else. This seems pretty straight forward but I can't figure out how to do it. Can someone please help me?
Thanks,
Mark
View 4 Replies
View Related
Jan 31, 2014
I have a function that accespts a string and a delimeter returns the results in a temp table. I am using the funtion for one of the columns in my view that needs be to split and display the column into different columns. The view takes for ever to run and finally it doesn't split and doesn't display in the column.
Function:
-----------------------------------
ALTER FUNCTION [dbo].[func_Split]
(
@DelimitedString varchar(8000),
[Code].....
Not sure what I am missing in the above view why it doesn't split the string.
View 8 Replies
View Related
Oct 19, 2006
I want to pass user-defined column names to views or procedures
I am using SQL Server 2005 Express.
I tried this.
CREATE PROCEDURE @userDefinedColumn varChar(10) = 'My_Column'
select @userDefinedColumn, count(ID) as [Total Records] from My_Table
GROUP BY @userDefinedColumn
This was not accepted. It won't allow a user defined parameter in the group by.
But I need to pass user defined parameters to views as well.
View 5 Replies
View Related
Aug 10, 2015
I want to insert attibute att1 in field F1 . Value for this attribute is content of another field in this table (F2).
My query :
update MyTable
set F1.modify
('insert attribute att1 {sql:column("F2")} into (/ROOT/Node1)[1]')
Where F1 Is not null
But I get this error :
XML well-formedness check: Duplicate attribute 'att1'. Rewrite your XQuery so it returns well-formed XML.
How do I check the douplicate attribute ?
View 0 Replies
View Related
May 16, 2008
HI,
I had to change the key columns of a dimension attribute to fix an error. I did this in BIDS. The change was from a single key column to a composite key column. Now I am getting these error when I process the cube:
Measure group attribute key column x does not match source attribute ..
I looked at the cube XMLA definition under mesaure groups and it still shows a single key column with inherited binding. However, the BIDS does not give me an option correct this in any way. I have had to do this once before and the only option seems to be removing the dimension from the cube and add it back in. But that is very error prone since I lose any specific settings at the cube dimension level not to mention aggregations no longer include the dimension, etc.
Not seeing an alternative, I went through each measure group (I have 7) and changed the key columns manually in the XMLA and saved the cube. This worked, but I don't understand why BIDS automatically doesn't do it.
Is this a flaw in the BIDS or I should be missing something.
thanks
MJ
View 3 Replies
View Related
Dec 4, 2006
We recently migrated from SQL Server 7 to SQL Server 2005. Now there's a curious thing with some legacy applications. I have pasted some code below. Don't judge me, because like I said, it's legacy.
You can see, that I have two connection strings. One is commented and accessing via SQL Native Client. The other one is doing this through the old SQL Server driver. Funnily enough, when I use the new Native Client driver, the exception "Run-time error '-2147467259 (80004005)' [Microsoft][SQL Native Client]Invalid attribute value" is thrown in the rsPorder2.Update line. With the old driver, this works just alright.
Is this a bug? Is there a way, to make the code run, because we don't want to search the whole application for other occurances, if not necessary.
Any insights would be greatly appreciated.
Best regards,
DD
Dim ilinx As New ADODB.Connection
Dim rsPorder As New ADODB.Recordset
Dim rsPorder2 As New ADODB.Recordset
Dim cmdLinx As New ADODB.Command
Dim strConn As String
Dim lvIli_number As String
'strConn = "DRIVER=SQL Native Client;Server=10.0.14.7;Description=Test2k;UID=sa;PWD=asdf;APP=Microsoft® Access;WSID=DEHHC023;DATABASE=Linx;Network=DBMSSOCN;"
strConn = "DRIVER=SQL Server;Server=10.0.14.7;Description=Test2k;UID=sa;PWD=asdf;APP=Microsoft® Access;WSID=DEHHC023;DATABASE=Linx;Network=DBMSSOCN;"
ilinx.Open strConn
Set cmdLinx.ActiveConnection = ilinx
lvIli_number = "12345"
cmdLinx.CommandText = "SELECT * FROM porder WHERE previous_ili_no = '" & lvIli_number & "' "
cmdLinx.CommandType = 1
rsPorder.Open cmdLinx, , 1, 1
If rsPorder.EOF Then
cmdLinx.CommandText = "SELECT * FROM porder WHERE ili_no = '" & lvIli_number & "' "
cmdLinx.CommandType = 1
rsPorder2.Open cmdLinx, , 1, 3
If rsPorder2.RecordCount > 0 Then
rsPorder2("Locked") = 0
rsPorder2.Update
End If
End If
rsPorder.Close
View 7 Replies
View Related
Jan 13, 2008
Hi to all....
I'm new on this forum, but, I'm a experienced programmer.
I wanna solve this problem (if you can helpme....), recently, I'm trying to migrate an old SQL 7 to the new SQL 2005 server enterprise edition, I have no problem to import the data, users, stored procedures, etc. and all work fine, I can connect troght ODBC from the others computers, including some older pentium 1 mmx 200 mhz. with WIN98 (yes!).
My problem is an legacy VB6 application that work (well fine) with SQL7 server, but, when i change the odbc of the desktops systems to the new 2005 SQL server and run this legacy application hi recibe this error:
(english translation from spanish language)
[ODBC SQL Server Driver][SQL Server] The table to be modified is not included on this cursor or these can't be modified throught this cursor.
I have look on the source code of the legacy application, and someone of the segment's that causes error is:
------------------------------------------------------------------------
Public Function ConsultaCamara(sRutOP As String, _
sRut1 As String, _
strConsulta As String, _
Tipo As String, _
chk As CheckBox, _
Timer1 As Timer, _
LbAviso As Label) As Long
'----------------------------
Dim rsCACH, rsCACH_upd0, rsCACH_upd1, rsCACH_upd2 As ADODB.Recordset
Dim CmCACH As ADODB.Command
Dim lPendiente As Boolean
Dim lActivo As Boolean
Dim strSQL1, strSQL_upd0, strSQL_upd1, strSQL_upd2 As String
Dim StrWHE As String
Dim DameTiempo As Integer
Dim snombre As String
Dim sMsgEstado As String
Dim sAviso_Inicial As String
Dim cNum As String
Dim cDig As String
...
...
...
'Defino el string de consulta
strSQL1 = " SELECT RUTOPERADOR, " & _
" IDCAMARA, " & _
" RUTCONSULTADO, " & _
" ESTADO, " & _
" CANCON, " & _
" CADENACONSULTA, " & _
" FINGRESO, " & _
" FULCONSINT, " & _
" ULTRUTOP " & _
" FROM BOLETIN " & _
" WHERE RUTCONSULTADO = '" & sRut1 & "'" & _
" AND (ESTADO = 'PE' OR ESTADO = 'AC' )"
Set rsCACH = CreateObject("ADODB.Recordset")
rsCACH.ActiveConnection = cn
rsCACH.CursorType = adOpenKeyset
rsCACH.LockType = adLockOptimistic
rsCACH.Open strSQL1
If rsCACH.EOF Then 'No hay registro antiguo o en consulta, creo uno para consultar
sMsgEstado = "NO Existen datos ES REGISTRO NUEVO" & vbCr
rsCACH.AddNew
ConsultaCamara = GeneraID()
rsCACH.Fields("IDCAMARA") = ConsultaCamara
rsCACH.Fields("RUTOPERADOR") = sRutOP
rsCACH.Fields("RUTCONSULTADO") = sRut1
rsCACH.Fields("ESTADO") = "PE"
rsCACH.Fields("CANCON") = 1
rsCACH.Fields("CADENACONSULTA") = strConsulta
rsCACH.Fields("FINGRESO") = GetDateTime() 'Format(Date, "Short Date")
rsCACH.Fields("FULCONSINT") = GetDateTime() 'Format(Date, "Short Date")
rsCACH.Fields("ULTRUTOP") = sRutOP
rsCACH.Update <----- here's launches the error
...
...
...
--------------------------------------------------------
As you see, I'm not english spokeman, I hope that you understand me.
Thanks and best regards.
View 3 Replies
View Related
May 11, 2006
I am getting error 0x80040E25 when I try to call seek after update on a Recordset opened as (adOpenStatic, adLockOptimistic, adCmdTableDirect)
9 - (13.250) - <2> - *** error in .DbRecordset.cpp, line 908
10 - (13.250) - <2> - ADO_ERRORS FOR pRs = 200a420, seek, err=-2147217883(80040e25)
11 - (13.250) - <2> - ADO_ERROR: E R R O R 1 of 1.
12 - (13.250) - <2> - ADO_ERROR: DESCRIPTION: All HROWs must be released before new ones can be obtained. [,,,,,].
13 - (13.250) - <2> - ADO_ERROR: NUMBER: 80040E25
14 - (13.250) - <2> - ADO_ERROR: NATIVE_ERROR: 0
15 - (13.250) - <2> - ADO_ERROR: SOURCE: Microsoft SQL Server 2005 Mobile Edition OLE DB Provider
I registered SQL Mobile 3.0 dlls using regsvr32.exe so now I can connect to SQLCE3.0 databases on desktop using plain ADO with such connection string _T("Provider=Microsoft.SQLSERVER.MOBILE.OLEDB.3.0; Data Source=") + name of the file
I have not asked this question before as it did not make sense -> there was no official SQLCE3.0 support on desktop. Now, since SQL CE is promiced to be supported on desktop as SQL/E I decided to ask.
View 1 Replies
View Related
Dec 20, 2005
As part of our security project, I've done the following when logged in as 'sa':
Created database roles 'dbrole1' within dbAccount
Created login and user 'user1' and added user to be a member of 'dbrole1'
Granted execute permissions on sp1 and sp2 to 'dbrole1'
However, I didn't see the above permissions listed in SQL Server Management Studio - Database - Security - Roles - Database Roles - 'dbrole1' properties - securables
Any ideas? Thanks!
View 4 Replies
View Related
Mar 5, 2008
I work on a copy of SQL Server Express on my desktop. After modifying and creating views and user defined functions, I would like to copy and paste them into the working database. Is there a method programmatically of doing this or must I copy and paste the t-sql language from the existing view to the new database--then save the new view on the working database?
View 6 Replies
View Related
Aug 25, 2014
T-SQL script for the following request ?
Generate script for view dependencies of user defined table types ?
View 2 Replies
View Related
Mar 9, 2007
I have a site and there is a ` current features` on the index which shows our newest pictures for movies. I use dreamweaver, so When you insert record a "picture", it takes place on the table, but when you insert another one, it doesn't replace the current one.
View 1 Replies
View Related
Nov 23, 2014
When i try to use the following command;
Update (table name)
set (Field name)='0'
where ID='1449' (1449 location of the record).
The "Field name" value is 875 and i need to edit the value to 0(zero).
It appears an error -
----------------------------
Msg 260, Level 16, State 1, Line 1
Disallowed implicit conversion from data type varchar to data type money, table 'dbname.dbo.table name', column 'field name'. Use the CONVERT function to run this query.
-----------------------------
So if i change the data type from right click design menu to nvarchar(50) can it be edited from the command that i used above?
View 3 Replies
View Related
Sep 26, 2007
Please help.
give you example
I have table = Product
and column = Product_name varchar(20)
Then I have view call v_product this view select * from product.
Each time I modify product type become varchar(25). My view v_product didn't get change. I have to alter the view
The question I have. I have a lot of tables more then 80 need to change the data type. Any one have best way refesh the view??? Thank you
View 11 Replies
View Related
Aug 24, 2007
hi
i have one view name vtest .which contains records from two table .i want to update this view in sqlserver 2000
how we can do this?
thanx
View 8 Replies
View Related
Jul 19, 2006
Hi all ,
I have a problem to insert new data to a view which created from 2 tables.
I am trying to so from run time
Any help will be appreciated
View 3 Replies
View Related
Mar 26, 2014
I am going to create a custom view (SQL08R2 now, but in SQL2012 later this year). One unusual feature is that someone suggested to limit the update capability to one column, and only allow certain number of rows to update, for instance in dev stage, 1 row at a time, and change it to allow 5 rows at a time when in production.
Could you build a trigger on a view? What other options out here?
View 2 Replies
View Related
Aug 15, 2014
I create a view with 2 joined tables:
with cte as (
select
DataID,
Name,
SubType,
FileType,
MimeType,
VersionID,
Version
from dtree A1, dversdata A2
where A1.dataid=A2.Docid And A1.Subtype='144'
AND
A2.mimetype='application/news-message-id'
update cte set MimeType = 'application/x-outlook-msg', Subtype=749
what I want to do is to update two columns. Both are from different tables and I get an error..
View 1 Replies
View Related
May 21, 2006
Hello all,
I'd like to create a view which shows all specific column values
(null values for example)
as calculated values from another column,
if for example i have the table:
---------------
| col1 | col2 |
|------|------|
| 123 | null |
| 126 | 9 |
---------------
i would like the view to be:
---------------
| col1 | col2 |
|------|------|
| 123 | 6 | ----> 6, since it's the sum of col1 digits 1+2+3
| 126 | 9 |
---------------
I don't really know how to do that, although i'm quite sure it's possible, any help will be appreciated,
Best Regards,
pitt
View 3 Replies
View Related
Mar 14, 2008
How can we use Update Properties on View? How update properties deals with multiple tables in view.
View 1 Replies
View Related
Mar 19, 2008
I have a flat /derived table of orders that customers made, virtually
order_tbl
(
order_id
,item_id
,product_id
,product_price
,product_name
,customer_id
,customer_name
,order_price
,order_tax
,order_date
,order_year
,order_month
,order_day
)
and I would like to have:
1.update on this derived table daily (how/what should I do - with triggers/jobs against the original tables?)
2.create a view that would show:
- by years the percentage of sold products
- quarterly percentage of new customers / rebuyers / etc.
- ...
3. Thinking of making a cube in BIDS (with dimensions / measures)
Any help is appreciated. :-)
View 1 Replies
View Related
Sep 25, 2006
Hi all,I asked a similar question a few weeks ago but I didn't explain myself to well so I was hoping for some more input.I have created a webpage in Visual web developer that contains a gridview that points to an SQL table.All works well as far as searching the table and sorting. The SQL table itself is Droped ( deleted ) and then re-created every 1 minute from a query to a linked DB2 database so that we have a "live" table of our DB2 system but in SQL.....However,There is now a requirement to be able to ADD data to this SQL table. eg: a comments field.. from the website.My procedure for re-creating the SQL DB is now useless as any data added through the website would be lost when the table gets re-created.What is the best way for me to achieve a permanent table in SQL that gets updated from the Linked server DB2 but that I can also add comments from the front end (Website Gridview)..I'm assuming some sort of update query and a join to a seperate, permanent table that contains the comments?.Please help. Ray..
View 1 Replies
View Related
Feb 27, 2008
hiii, i am using asp.net 2005 and sql server 2005...i hav a page in which i have used gridview and sql data source..i have written the update command for the same..the problem is when i add the where clause in the query i get an error ,,,,here is the code
UpdateCommand="UPDATE SMEtre_Master SET FirstName =@FirstName, LastName =@LastName, Type_of_SME =@Type_of_SME, Agency_Name =@Agency_Name, Email =@Email, Address =@Address, Phone =@Phone, Mobile =@Mobile, Fax =@Fax, Experience =@Experience, City =@City, State =@State where SME_Id=@SME_Id"
View 3 Replies
View Related
