How Can I Get Which Columns Were Updated In Trigger On Update
Nov 22, 2006
Hi,
I'm using sql-2005.
I want to update several columns in different tables whenever an update is happend on specific table. I have a trigger for that which update all the relevant places when it fires.
I want to do this update only if certains columns were changed, otherwise - do anything, to reduce performance.
How Can I know which columns were updated inside the trigger? The tables has many columns and only if 2 of them were changed then I need to update other tables.
Many thanks,
Nira.
View 2 Replies
ADVERTISEMENT
Dec 17, 2007
Hi,
I am creating update trigger(After) on a table.I want to catch an updated row and insert the values of this row into
a new table.How can i catch this row while creating a trigger after update.
View 7 Replies
View Related
Mar 8, 2008
I have a Trigger Instead of Update.
When I Update my table, the trigger runs correctly but my table never is updated.
View 5 Replies
View Related
May 8, 2008
Im using a trigger to check updates on particular table and execute a email. it works but it doesnt show the right record
im looking into one table called SiteInfo.
here is my code
Im using sql 2005, can someone look at my code or the select statement.
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
CREATE TRIGGER TTSUpdate
ON SiteInfo
FOR UPDATE
AS
declare @SiteID varchar(10)
declare @Body2 varchar(2000)
declare @Sitename varchar(50)
declare @TTSCreate varchar(30)
declare @TTSCreator varchar(50)
declare @Subject2 varchar (100)
SELECT @SiteID = SiteID,@Sitename = AccountName,@TTSCreator = TTSOwner,@TTSCreate = TTSCreatedDate
from SiteInfo
SET @Body2 = 'New TTS site created: ' + @Sitename + ' With TTS Site ID:' + @SiteID + ' TTS was created on: ' + @TTSCreate + ' By:' + @TTSCreator
SET @subject2 = 'New TTS site created: ' + @Sitename
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'TTSAdmin',
@recipients = 'email address here',
@subject = @subject2,
@body = @body2
GO
View 3 Replies
View Related
Jun 4, 2007
Hi
Apologies if this is a silly question
I have a basic table "Customer" which has
Id
Address1
Address2
Address3
Town
County
Postcode
SearchData
After I insert or Update a row in this table I need to update the SearchData column
with
UPPER(ADDRESS1) + UPPER(ADDRESS2) + UPPER(TOWN) + UPPER(POSTCODE)
only for that Id
I'm sure this is only a basic update but all the examples I can find are for inserting into other tables not the row itself.
Regards
David
View 4 Replies
View Related
Jun 15, 2004
I've gotten conflicting info about this in the past so I thought I'd try to get clarification.
When a record is deleted, I'm sure it fires the delete trigger. Does it also fire the update trigger?
Thanks
View 3 Replies
View Related
Jan 22, 2008
Hi guys, may I know is it possible to create an update trigger like this ? Assuming there are two database, database A and database B and both are having same tables called 'Payments' table. I would like to update the Payments records on database A automatically after Payments records on database B had been updated. I can't use replication because both tables might having different records and some records are the same. Hope can get any assistance here, thank you.
Best Regards,
Hans
View 8 Replies
View Related
Nov 11, 2013
I want to update a field with a trigger only if a specific field is updated.
When I try the code below, it updates the field when any field in the record is updated. Is there a way to only make look at picked_dt?
ALTER TRIGGER [dbo].[UpdatePickedDate]
on [dbo].[oeordlin_sql]
after update
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
[Code] .....
View 4 Replies
View Related
Feb 16, 2006
Hi SQL fans,I realized that I often encounter the same situation in a relationdatabase context, where I really don't know what to do. Here is anexample, where I have 2 tables as follow:__________________________________________ | PortfolioTitle|| Portfolio |+----------------------------------------++-----------------------------+ | tfolio_id (int)|| folio_id (int) |<<-PK----FK--| tfolio_idfolio (int)|| folio_name (varchar) | | tfolio_idtitle (int)|--FK----PK->>[ Titles]+-----------------------------+ | tfolio_weight(decimal(6,5)) |+-----------------------------------------+Note that I also have a "Titles" tables (hence the tfolio_idtitlelink).My problem is : When I update a portfolio, I must update all theassociated titles in it. That means that titles can be either removedfrom the portfolio (a folio does not support the title anymore), addedto it (a new title is supported by the folio) or simply updated (atitle stays in the portfolio, but has its weight changed)For example, if the portfolio #2 would contain :[ PortfolioTitle ]id | idFolio | idTitre | poids1 2 1 102 2 2 203 2 3 30and I must update the PortfolioTitle based on these values :idFolio | idTitre | poids2 2 202 3 352 4 40then I should1 ) remove the title #1 from the folio by deleting its entry in thePortfolioTitle table2 ) update the title #2 (weight from 30 to 35)3 ) add the title #4 to the folioFor now, the only way I've found to do this is delete all the entriesof the related folio (e.g.: DELETE TitrePortefeuille WHERE idFolio =2), and then insert new values for each entry based on the new givenvalues.Is there a way to better manage this by detecting which value has to beinserted/updated/deleted?And this applies to many situation :(If you need other examples, I can give you.thanks a lot!ibiza
View 8 Replies
View Related
Dec 8, 2006
is there a Trigger that monitors updated rows? I would like to run a
insert into sometable (pkcolumnname)
select pkcolumnname from monitoredtable where ????
"i dont know what goes here to only get value of rows that have been updated"
View 1 Replies
View Related
Feb 14, 2007
Hello
I am a newbie creating triggers and I would like to know what is the name of the updated logical table. That is, since the are identifiers like "inserted" and "deleted" that represent the inserted and deleted rows, respectivaly, I presumed that "updated" existed - but it does not.
I have a table with a column named "UpdatedTimeStamp" which I would like to update anytime the other columns are modified. I intended to create the following trigger:
create trigger myTrigger
on myTable
after update
as
update updated set UpdateTimeStamp=GetDate()
Of course, "updated" is not a valid identifier that represents the updated row.
Please, help me in creating this trigger. What is the correct way of doing a trigger like this?
Thanks a lot in advanced.
View 6 Replies
View Related
Jul 23, 2005
Hi,I want to log updates to specific fields, storing the new and oldvalues. Is there any way I can iterate the collection of updatedfields within a trigger in order accomplish this?Thanks in advance,Julie Vazquez
View 4 Replies
View Related
Aug 30, 2007
Hi,
We have a column syncUpdate in some tables and we need a trigger (or one for each table) which will set the current dateTime for the syncLastUpdate (dateTime) when either the row is inserted or updated (we have to ignore the syncLastUpdate column itself as this would be an infinite loop, I think).
I don't know much about DB but I think that is easly doable.
Can anyone help me with that, please?
Cheers
View 3 Replies
View Related
May 16, 2008
Hi All,
I am using a trigger. I want to get the data of a row before updating inside this trigger and insert it into a backup table. Please anybody help me. Example with code is highly appreciated.
Thanks in advance.
View 3 Replies
View Related
Mar 25, 2013
I am having a hard time understanding triggers. My goal is to put a trigger on table x where records are UPDATED or DELETED. When this trigger fires I need to take the record ID and put the ID modified record into table y with the date modified. so basically logging the recordid changed with the getDate()
I don't quite understand how to get the rowid of the modified record.
View 14 Replies
View Related
Oct 12, 2007
I was asked this question due to performance issues..
If you update a 1 or two columns in table, what gets replicated?? Is it the whole row or just those columns that were updated??
I am trying to find this answer cause it will have an effect on the way we do some updates in the future.
Thanks...
also if you have any links to information about this that would be great.
View 1 Replies
View Related
Apr 10, 2006
Hello,
I am using SQL Server 2005 and ASP.NET 2.0. We have a very simple content management system where we have to keep track of date last modified for each row in all of our content tables. I know there's a "timestamp" datatype that is used for replication scenarios, but is there anything similar that I can use to set up a date_modified column for each of my content tables that will automatically update with GETDATE() whenever anything in a given row is updated?
Or do I have to create a date_modified column of smalldatetime datatype and write a trigger on update for EVERY single table of content that I have in the database? It seems there should be an easier way to do this than to write 20 triggers for my 20 content tables.
Thanks!
View 1 Replies
View Related
Dec 11, 2006
Trigger not running when trying to select data from a column that is being updated?
View 1 Replies
View Related
Jul 9, 2015
I am looking to created a trigger that inserts records into a log table to show the stored porcedure that has updated a specific column to a specific value in a specific table
At present I have:
CREATE TRIGGER [dbo].[trUpdaterTable]
ON [dbo].[t_account]-- A DB level trigger
FOR UPDATE
--Event we want to capture
AS
IF update (document_status)
[Code] ...
However this doesn't appear to bring back the procedure that triggered the update...
The value the trigger should update on is document_status = 0
DDLProcExecutedByEventDate
NULLNULLLOMBDAadministrator2015-06-25 07:42:01.677
NULLNULLLOMBDA im64602015-06-25 07:51:34.503
NULLNULLLOMBDAadministrator2015-06-25 07:52:01.610
NULLNULLLOMBDAadministrator2015-06-25 08:02:01.417
CREATE TRIGGER [dbo].[trTableupdateaccount] ON [DoesMore].[dbo].[t_account]
[Code] ....
View 9 Replies
View Related
Feb 21, 2006
I have a table that contains a field LastUpdated. This field should contains the date of the last update of the record.
Is there a way to auto-update this field value to the getdate() value each time the record is "touched" by an UPDATE sql command?
Thanks in advance,
Joannes
View 1 Replies
View Related
Jan 31, 2005
I wrote a stored proc to be implemented in a datagrid. I went and used it on a record to update some information and it updated THE WHOLE DATABASE WITH THAT ONE RECORD..
IF anyone could shead some light on what I'm doing wrong that would be great.
Here is the syntax for my stored proc.
CREATE PROC updateResults2
@id int, @address1 nvarchar (50), @address2 nvarchar (50), @CITY nvarchar (33), @ST nvarchar (10), @ZIP_OUT nvarchar (5), @ZIP4_OUT nvarchar (4), @home_phone nvarchar (22), @NEWPhone nvarchar (20)
AS
UPDATE Results
SET address1 = @address1,
address2 = @address2,
CITY = @CITY,
ST = @ST,
ZIP_OUT = @ZIP_OUT,
ZIP4_OUT = @ZIP4_OUT,
home_phone = @home_phone,
NEWPhone = @NEWPhone
GO
As said previously it ran but it updated the WHOLE DATABASE with the same change (WHICH I DIDNT WANT IT TO DO)!!
Thanks in advance.
RB
View 3 Replies
View Related
Jun 29, 2006
Using MS SQL 2000I have a stored procedure that processes an XML file generated from anAudit program. The XML looks somewhat like this:<ComputerScan><scanheader><ScanDate>somedate&time</ScanDate><UniqueID>MAC address</UniqueID></scanheader><computer><ComputerName>RyanPC</ComputerName></computer><scans><scan ID = "1.0" Section= "Basic Overview"><scanattributes><scanattribute ID="1.0.0.0" ParentID=""Name="NetworkDomian">MSHOMe</scanattribute>scanattribute ID = "1.0.0.0.0" ParentID="1.0.0.0", etc etc....This is the Update portion of the sproc....CREATE PROCEDURE csTest.StoredProcedure1 (@doc ntext)ASDECLARE @iTree intDECLARE @assetid intDECLARE @scanid intDECLARE @MAC nvarchar(50)CREATE TABLE #temp (ID nvarchar(50), ParentID nvarchar(50), Namenvarchar(50), scanattribute nvarchar(50))/* SET NOCOUNT ON */EXEC sp_xml_preparedocument @iTree OUTPUT, @docINSERT INTO #tempSELECT * FROM openxml(@iTree,'ComputerScan/scans/scan/scanattributes/scanattribute', 1)WITH(ID nvarchar(50) './@ID',ParentID nvarchar(50) './@ParentID',Name nvarchar(50) './@Name',scanattribute nvarchar(50) '.')SET @MAC = (select UniqueID from openxml(@iTree, 'ComputerScan',1)with(UniqueID nvarchar(30) 'scanheader/UniqueID'))IF EXISTS(select MAC from tblAsset where MAC = @MAC)BEGINUPDATE tblAsset set DatelastScanned = (select ScanDate fromopenxml(@iTree, 'ComputerScan', 1)with(ScanDate smalldatetime'scanheader/ScanDate')),LastModified = getdate() where MAC =@MACUPDATE tblScan set ScanDate = (select ScanDate fromopenxml(@iTree,'ComputerScan', 1)with(ScanDate smalldatetime 'scanheader/ScanDate')),LastModified = getdate() where MAC =@MACUPDATE tblScanDetail set GUIID = #temp.ID, GUIParentID =#temp.ParentID, AttributeValue = #temp.scanattribute, LastModified =getdate()FROM tblScanDetail INNER JOIN #tempON (tblScanDetail.GUIID = #temp.ID ANDtblScanDetail.GUIParentID =#temp.ParentID AND tblScanDetail.AttributeValue = #temp.scanattribute)WHERE MAC = @MAC!!!!!!!!!!!!!!!!!! THIS IS WHERE IT SCREWS UP, THIS NEXT INSERTSTATEMENT IS SUPPOSE TO HANDLE attributes THAT WERE NOT IN THE PREVIOUSSCAN SO CAN NOT BE UDPATED BECAUSE THEY DON'T EXISTYET!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!INSERT INTO tblScanDetail (MAC, GUIID, GUIParentID,ScanAttributeID,ScanID, AttributeValue, DateCreated, LastModified)SELECT @MAC, b.ID, b.ParentID,tblScanAttribute.ScanAttributeID,@scanid, b.scanattribute, DateCreated = getdate(), LastModified =getdate()FROM tblScanDetail LEFT OUTER JOIN #temp a ON(tblScanDetail.GUIID =a.ID AND tblScanDetail.GUIParentID = a.ParentID ANDtblScanDetail.AttributeValue = a.scanattribute), tblScanAttribute JOIN#temp b ON tblScanAttribute.Name = b.NameWHERE (tblScanDetail.GUIID IS NULL ANDtblScanDetail.GUIParentID ISNULL AND tblScanDetail.AttributeValue IS NULL)ENDELSEBEGINHere are a few table defintions to maybe help out a little too...if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[FK_tblScan_tblAsset]') and OBJECTPROPERTY(id,N'IsForeignKey') = 1)ALTER TABLE [dbo].[tblScan] DROP CONSTRAINT FK_tblScan_tblAssetGOif exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[tblAsset]') and OBJECTPROPERTY(id, N'IsUserTable') =1)drop table [dbo].[tblAsset]GOCREATE TABLE [dbo].[tblAsset] ([AssetID] [int] IDENTITY (1, 1) NOT FOR REPLICATION NOT NULL ,[AssetName] [nvarchar] (50) COLLATESQL_Latin1_General_CP1_CI_AS NULL,[AssetTypeID] [int] NULL ,[MAC] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,[DatelastScanned] [smalldatetime] NULL ,[NextScanDate] [smalldatetime] NULL ,[DateCreated] [smalldatetime] NULL ,[LastModified] [smalldatetime] NULL ,[Deleted] [bit] NULL) ON [PRIMARY]GO-----------------------------if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[tblScan]') and OBJECTPROPERTY(id, N'IsUserTable') =1)drop table [dbo].[tblScan]GOCREATE TABLE [dbo].[tblScan] ([ScanID] [int] IDENTITY (1, 1) NOT FOR REPLICATION NOT NULL ,[AssetID] [int] NULL ,[ScanDate] [smalldatetime] NULL ,[AssetName] [nvarchar] (50) COLLATESQL_Latin1_General_CP1_CI_AS NULL,[MAC] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,[DateCreated] [smalldatetime] NULL ,[LastModified] [smalldatetime] NULL ,[Deleted] [bit] NOT NULL) ON [PRIMARY]GO----------------------------if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[tblScanDetail]') and OBJECTPROPERTY(id,N'IsUserTable') = 1)drop table [dbo].[tblScanDetail]GOCREATE TABLE [dbo].[tblScanDetail] ([ScanDetailID] [int] IDENTITY (1, 1) NOT FOR REPLICATION NOTNULL ,[ScanID] [int] NULL ,[ScanAttributeID] [int] NULL ,[MAC] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,[GUIID] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_ASNOT NULL,[GUIParentID] [nvarchar] (50) COLLATESQL_Latin1_General_CP1_CI_ASNULL ,[AttributeValue] [nvarchar] (50) COLLATESQL_Latin1_General_CP1_CI_ASNULL ,[DateCreated] [smalldatetime] NULL ,[LastModified] [smalldatetime] NULL ,[Deleted] [bit] NOT NULL) ON [PRIMARY]GO------------------------------------------------------------My problem is that Insert statement that follows the update intotblScanDetail, for some reason it just seems to insert everything twiceif the update is performed. Not sure what I did wrong but any helpwould be appreciated. Thanks in advance.
View 9 Replies
View Related
May 23, 2007
Here is my problem: I've created a table in MSSQL named MyReferences and then a typed dataset to connect to it.
Then I realized that I needed to add a column to MyReferences table and then I did it.
The problem is that I cannot find a way to add the new column to the typed dataset. I am unable to view it in the available columns.
Can anyone help me?
I'm using Visual Studio 2005 sp1 and C#.
Best regards
Alessandro
View 1 Replies
View Related
Mar 6, 2008
Hi all. I have this problem:
on insert in a new table a have to change one column before insert.
I wrote this trigger:
create trigger SUBSCR_ID_TRANSFER ON dbo.SalesOrderExtensionBase AFTER INSERTAS BEGIN SET NOCOUNT ON;DECLARE @OpportunityID uniqueidentifier;DECLARE @subscrId uniqueidentifier;declare @salesorderid uniqueidentifier;set @salesorderid = (select SalesorderID from inserted)SET @OpportunityID = (SELECT OpportunityId FROM SalesOrderBase where SalesOrderID=@salesorderid)SET @subscrId = (SELECT New_old_subscridId from OpportunityExtensionbase where OpportunityID=@OpportunityID)Update inserted set New_old_subscridId = @subscrIdENDbut SQL Rise the error "The inserted values can not be modified"
how to slove this issue.
Thanks.
View 5 Replies
View Related
Jul 20, 2005
Are there any limitations or gotchas to updating the same table whichfired a trigger from within the trigger?Some example code below. Hmmm.... This example seems to be workingfine so it must be something with my specific schema/code. We'reworking on running a SQL trace but if anybody has any input, fireaway.Thanks!create table x(Id int,Account varchar(25),Info int)GOinsert into x values ( 1, 'Smith', 15);insert into x values ( 2, 'SmithX', 25);/* Update trigger tu_x for table x */create trigger tu_xon xfor updateasbegindeclare @TriggerRowCount intset @TriggerRowCount = @@ROWCOUNTif ( @TriggerRowCount = 0 )returnif ( @TriggerRowCount > 1 )beginraiserror( 'tu_x: @@ROWCOUNT[%d] Trigger does not handle @@ROWCOUNT[color=blue]> 1 !', 17, 127, @TriggerRowCount) with seterror, nowait[/color]returnendupdate xsetAccount = left( i.Account, 24) + 'X',Info = i.Infofrom deleted, inserted iwhere x.Account = left( deleted.Account, 24) + 'X'endupdate x set Account = 'Blair', Info = 999 where Account = 'Smith'
View 1 Replies
View Related
Apr 7, 2014
I know 2008 MS SQL Server has a timestamp data type that adds date and time when the rows are inserted. Is there a way to automatically update the date and time when the rows are updated?
View 5 Replies
View Related
Dec 23, 2014
I'm working on databases where statistics of some indexes (tables) are changing too frequently. Once I update them manually, one minute after they get 10-20% change, and five minutes after they get over 100% change. Tables get updated very frequently (multiple times in a second).
When I run a query to read from sys.stats, sys.dm_db_stats_properties and other dynamic views, I see that they were last updated when I did it manually, but the change rate overpassed the 500+20% (tables have multiples of 10K rows). Auto create and update statistics are set to true on all databases, and I don't know why sql server does not do that automatically.
View 2 Replies
View Related
Jan 3, 2005
hi!
I have a big problem. If anyone can help.
I want to retrieve the last update time of database. Whenever any update or delete or insert happend to my database i want to store and retrieve that time.
I know one way is that i have to make a table that will store the datetime field and system trigger / trigger that can update this field record whenever any update insert or deletion occur in database.
But i don't know exactly how to do the coding for this?
Is there any other way to do this?
can DBCC help to retrieve this info?
Please advise me how to do this.
Thanks in advance.
Vaibhav
View 10 Replies
View Related
Jul 8, 2015
I have a table where table row gets updated multiple times(each column will be filled) based on telephone call in data.
Initially, I have implemented after insert trigger on ROW level thinking that the whole row is inserted into table will all column values at a time. But the issue is all columns are values are not filled at once, but observed that while telephone call in data, there are multiple updates to the row (i.e multiple updates in the sense - column data in row is updated step by step),
I thought to implement after update trigger , but when it comes to the performance will be decreased for each and every hit while row update.
I need to implement after update trigger that should be fired on column level instead of Row level to improve the performance?
View 7 Replies
View Related
Jul 30, 2015
If the id1 will change in table1 it should also change the corresponding id1 field in table2 it does not do anything.
CREATE TRIGGER [dbo].[IDCHANGE]
ON [dbo].[table1]
AFTER UPDATE
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
[Code] .....
View 1 Replies
View Related
May 30, 2008
Hi,
I am not sure if this is the right forum to post this question.
I run an update statement like "Update mytable set status='S' " on the SQL 2005 management Studio.
When I run "select * from mytable" for a few seconds all status = "S". After a few seconds all status turn to "H".
This is a behaviour when you have an update trigger for the table. But I don't see any triggers under this table.
What else would cause the database automatically change my update?
Could there be any other place I should look for an update trigger on this table?
Thanks,
View 3 Replies
View Related
Feb 15, 2008
Hello
I've to write an trigger for the following action
When a entry is done in the table Adoscat79 having in the index field Statut_tiers the valeur 1 and a date in data_cloture for a customer xyz
all the entries in the same table where the no_tiers is the same as the one entered (many entriers) should have those both field updated
statut_tiers to 1
and date_cloture to the same date as entered
the same action has to be done when an update is done and the valeur is set to 1 for the statut_tiers and a date entered in the field date_clture
thank you for your help
I've never done a trigger before
View 14 Replies
View Related
Dec 17, 2001
I have an update trigger which fires from a transactiion table to update a parent record in another table. I am getting no errors, but also no update. Any help appreciated (see script below)
create trigger tr_cmsUpdt_meds on dbo.medisp for UPDATE as
if update(pstat)
begin
update med
set REC_FLAG = 2
from deleted dt
where med.uniq_id = dt.uniq_id
and dt.pstat = 2
and dt.spec_flag = 'kop'
end
View 1 Replies
View Related
