I am trying to find a needle in a haystack.
One of the tables in this database has a column named column_xyz.
There are over 800 tables, each with numerous columns. If I know that the column I am looking for is "column_xyz" is there an easy query I can do to identify all tables that contain that column?
I hope.
Thanks
How can I easily identify who dropped a table?
View 8 Replies View RelatedHi
I have been looking for a way to identify the primary key defined in a
table using a SQL Sentence...how can i do it?
Thanx for your support!!!
Diego Bayona
Hi,
Have a LOB error which provides the corrupt PageID and this recommends a DBCC CHECKDB. However I'm unable to identify what the base table for the PageID. DBCC PAGE does not provide base table info (I think), DBCC PGLINKAGE has been retired in SS2005 and DBCC READPAGE doesn't work either.
Does any know of a valid SS2005 command or technique which will allow my to identify the base table for a PageID???
Hi,
Have a LOB error which provides the corrupt PageID and this recommends a DBCC CHECKDB. However I'm unable to identify what the base table for the PageID. DBCC PAGE does not provide base table info (I think), DBCC PGLINKAGE has been retired in SS2005 and DBCC READPAGE doesn't work either.
Does any know of a valid SS2005 command or technique which will allow my to identify the base table for a PageID???
I have installed the Adobe iFilter 11 64 bit and set the path to the bin folder. I still cannot find any text from the pdf files. I suspect I am missing something trivial because I don't find much when I Bing for this so it must not be a common problem.Here is the code.
--Adobe iFilter 11 64 bit is installed
--The Path variable is set to the bin folder for the Adobe iFilter.
--SQL Developer version 64 bit on both Windows 7 and Windows 8.
USE master;
GO
DROP DATABASE FileTableStudy;
GO
CREATE DATABASE FileTableStudy
ON PRIMARY
[code]....
How to find if there is a query that can be written on DMV's which will be able to retrieve the indexes that are not being used in a table.
View 2 Replies View RelatedI have a query/report that I need to create that needs to look at the size of a company and based on that size apply different rules. I am sure that this is not the only query/report I'll need to do using this and I'm also not so sure that the size ranges won't be changed in the future. Given this, I'd like to store the size ranges in a lookup(global) table. That way, if the ranges ever change I can just alter them in that table and not in all of the queries/reports that use them. What I need to figure out is how to join the live table with the look up table.
Specifically, here is what I have. The look up table would be:
Code Block
CREATE TABLE #gl_sizerange (
glsid int IDENTITY(1,1) NOT NULL,
lowsize int,
highsize int,
sizecat varchar(10),
milestone varchar(25),
days int
) ON [PRIMARY]
INSERT into #gl_sizerange VALUES(1, 24, 'Small', 'Approach', 14)
INSERT into #gl_sizerange VALUES(1, 24, 'Small', 'Interview', 14)
INSERT into #gl_sizerange VALUES(1, 24, 'Small', 'Demonstrate', 21)
INSERT into #gl_sizerange VALUES(1, 24, 'Small', 'Negotiate', 14)
INSERT into #gl_sizerange VALUES(1, 24, 'Small', 'Close', 7)
INSERT into #gl_sizerange VALUES(25, 99, 'Medium', 'Approach', 14)
INSERT into #gl_sizerange VALUES(25, 99, 'Medium', 'Interview', 21)
INSERT into #gl_sizerange VALUES(25, 99, 'Medium', 'Demonstrate', 21)
INSERT into #gl_sizerange VALUES(25, 99, 'Medium', 'Negotiate', 14)
INSERT into #gl_sizerange VALUES(25, 99, 'Medium', 'Close', 7)
INSERT into #gl_sizerange VALUES(100, 499, 'Large', 'Approach', 14)
INSERT into #gl_sizerange VALUES(100, 499, 'Large', 'Interview', 21)
INSERT into #gl_sizerange VALUES(100, 499, 'Large', 'Demonstrate', 21)
INSERT into #gl_sizerange VALUES(100, 499, 'Large', 'Negotiate', 14)
INSERT into #gl_sizerange VALUES(100, 499, 'Large', 'Close', 7)
INSERT into #gl_sizerange VALUES(500, 300000000, 'Super', 'Approach', 28)
INSERT into #gl_sizerange VALUES(500, 300000000, 'Super', 'Interview', 35)
INSERT into #gl_sizerange VALUES(500, 300000000, 'Super', 'Demonstrate', 28)
INSERT into #gl_sizerange VALUES(500, 300000000, 'Super', 'Negotiate', 35)
INSERT into #gl_sizerange VALUES(500, 300000000, 'Super', 'Close', 35)
Then what I have is two more tables, one that indicates the size of the company and another that has the milestone contained within it and I will also calculate how long that milestone has been open and if it is longer than what is in the lookup table for that milestone and size range I need it returned in the report. Here are some quick sample table to represent that data (I've condensed the size and number of tables for the example):
Code Block
CREATE TABLE #en_entity (
enid int NOT NULL,
orgsize int,
) ON [PRIMARY]
INSERT into #en_entity VALUES(1, 5)
INSERT into #en_entity VALUES(2, 18)
INSERT into #en_entity VALUES(3, 24)
INSERT into #en_entity VALUES(4, 25)
INSERT into #en_entity VALUES(5, 47)
INSERT into #en_entity VALUES(6, 101)
INSERT into #en_entity VALUES(7, 499)
INSERT into #en_entity VALUES(8, 500)
INSERT into #en_entity VALUES(9, 10000)
INSERT into #en_entity VALUES(10, 567890)
CREATE TABLE #op_opportunity (
opid int NOT NULL,
enid int NOT NULL,
milestone varchar(25),
daysopen int
) ON [PRIMARY]
INSERT into #op_opportunity VALUES(1, 1, 'Approach', 5)
INSERT into #op_opportunity VALUES(2, 2, 'Interview', 18)
INSERT into #op_opportunity VALUES(3, 4, 'Negotiate', 24)
INSERT into #op_opportunity VALUES(4, 7, 'Demonstrate', 25)
INSERT into #op_opportunity VALUES(5, 7, 'Approach', 7)
INSERT into #op_opportunity VALUES(6, 9, 'Close', 35)
INSERT into #op_opportunity VALUES(7, 8, 'Close', 36)
So, given the sample data, I would expect the results to return me the following opids from the #op_opportunity table because they don't comply with what is in the look up table based on milestone, size and days open: 2,3,4,7
I have a table that contains words that will be used to search another table where FullText index has been created on searchable columns. I'm basically trying to run something like this:
SELECT t1.col1, t2.col3
FROM tbl1 t1, tbl2 t2
WHERE CONTAINS (t1.col1, t2.col1)
I know this won't work but is there a way to join these two tables so the words (t2.col1) can be passed as search conditions? There is no common key on both tables so normal join won't work. I'm trying to find a way to pass the search words from one table to another.
I'm getting a replication error that an object (Table) was not found. Any script that can capture this information?
View 3 Replies View RelatedAny SQL that can be used to identify all objects that depend on a particular table? For example, sprocs, functions, views, etc.
View 3 Replies View RelatedI've attempted to identify a primary and foreign key in these two tables, but I am getting a bunch of errors re duplicate keys and column names needing to be unique.Perhaps the primary and foreign key I have identified don't meet the criteria?
CREATE TABLE StockNames
(
-- Added Primary key to [stock_symbol]
[stock_symbol] VARCHAR(5) NOT NULL CONSTRAINT PK_stock_symbol PRIMARY KEY,
[stock_name] VARCHAR(150) NOT NULL,
[stock_exchange] VARCHAR(50) NOT NULL,
[code].....
I am looking to create a script that will go through a table a pick out the necessary columns to create a unique record. Some of the tables that I am working with have 200 plus columns and I am not sure if I would have to list every column name in the script or if they could be dynamically referenced. I am working with a SQL server that has little next to no documentation and everytime I type to mere some tables, I get too many rows back.
View 4 Replies View RelatedIF Object_id('GoldenSecurity') IS NOT NULL DROP TABLE dbo.GoldenSecurity;
IF Object_id('GoldenSecurityRowVersion') IS NOT NULL DROP TABLE dbo.GoldenSecurityRowVersion;
CREATE TABLE dbo.GoldenSecurity (securityID INT, CompanyId INT, Securityname VARCHAR(50), issuedate SMALLDATETIME, currencyID INT)
[Code] ......
In the Operating environment databases, may be made tables in the database on a temporary basis but they are still yet and they are not removed, how to identify tables that have been made on a temporary basis are not used (don’t have any read & write records)?
View 4 Replies View RelatedI’ve got a situation where the columns in a table we’re grabbing from a source database keep changing as we need more information from that database. As new columns are added to the source table, I would like to dynamically look for those new columns and add them to our local database’s schema if new ones exist. We’re dropping and creating our target db table each time right now based on a pre-defined known schema, but what we really want is to drop and recreate it based on a dynamic schema, and then import all of the records from the source table to ours.It looks like a starting point might be EXEC sp_columns_rowset 'tablename' and then creating some kind of dynamic SQL statement based on that. However, I'm hoping someone might have a resource that already handles this that they might be able to steer me towards.Sincerely,
Bryan Ax
we have a table in our ERP database and we copy data from this table into another "stage" table on a nightly basis. is there a way to dynamically alter the schema of the stage table when the source table's structure is changed? in other words, if a new column is added to the source table, i would like to add the column to the stage table during the nightly refresh.
View 4 Replies View RelatedHello,
I'd like to create a temporary table with the same schema as an exiting table. How can I do this without hard coding the column definitions into the temporary table definition?
I'd like to do something like:
CREATE TABLE #tempTable LIKE anotherTable
..instead of...
CREATE TABLE #tempTable (id INT PRIMARY KEY, created DATETIME NULL etc...
I'm sure there must be a simple way to do this!
Many thanks,
Ben S
I have one control table to store all related table name
Table ID TableName
1 TableA
2 TableB
In Table A:
RecordID Value
1 1
2 2
3 3
In Table B:
RecordID Value
1 1
2 2
3 3
How can I get the result by select the Table list first and then combine the data in table A and table B?
Thank you!
I'm just wonder if this is a bug in MS Search or am I doing something wrong.
I have a query below
declare @search_clause varchar(255)
set @Search_Clause = ' "hepatitis b" and "hepatocellular carcinoma"'
select * from results
where contains(finding,@search_clause)
I don't get the correct result at all.
If I change my search_clause to "hepatitis" and "hepatocellular carcinoma -- without the "b"
then i get the correct result.
It seems MS Search doesn't like the phrase contain one letter or some sort or is it a know bug?
Anyone know?
Thanks
I am struggling to come up with a set-based solution for this problem (i.e. that doesn't involve loops/cursors) ..A table contains items (identified by an ItemCode) and the set they belong to (identified by a SetId). Here is some sample data:
SetIdItemCode
1A
1B
24
28
26
310
312
410
[code]....
You can see that there are some sets that have the same members:
- 1 and 10
- 2 and 11
- 7, 8 & 9
What I want to do is identify the sets that have the same members, by giving them the same ID in another column called UniqueSetId.
Hi
I come from a MySQL background and have been having some trouble finding the MSSQL command that corresponds to MySQL's "describe." I Googled for around 1/2 hour but can't seem to find it.
Any help appreciated
Hey,
I'm looking at creating a table in a stored procedure
[declare @tempTable table]
however, rather than then declaring the tables schema
[declare @tempTable table (pkField IDENTITY (1,1), SomeOtherField varchar(50), ...)]
I'd like it to simply use the schema of an already existing table (plus an additional column).
Is there a way to do this without having to manually write the table schema?
A simple example is:
I have a table
OriginalTable (idCol, NameCol, InfoCol)
I'd like to create a temp instance of that table called tempTable which would have a final schema of
tempTable (idCol, NameCol, InfoCol, myTempCol)
The reason I'd like to do this using the schema is so that I don't need to update all my procedures in the future when we decide to add some more detail to the originaltable which needs to be selected as well.
Thanks a lot for any help or direction you can provide.
-Ashleigh
I have a group of TV listing data need to map into database tables.Data looks like following:http://www.oniva.com/upload/1356/crew.jpgI want to create a table for productionCrew of each TV programthe data is like -crew -programID -member-member-member ... etc-programID -member-member-member ... etc-programID -member-member-member ... etc... etcabove are data from productionCrew of all TV program, for eachprogramID we have a list of members.Should I merge all member into a big string?Or should I use 2 tables to store the Crew data?If i use 2 tables, how the fields / column will look like?
View 2 Replies View RelatedGO
CREATE TABLE [dbo].[CmnLanguage]( [Id] [char](2) NOT NULL CONSTRAINT PkCmnLanguage_Id PRIMARY KEY, [UniqueName] [varchar](26) NOT NULL, [NativeName] [nvarchar](26) NOT NULL, [DirectionType] [smallint] NOT NULL, [IsVisible] [bit] NOT NULL, [CreatedDateTime] [datetime] NOT NULL DEFAULT GETDATE(), [ModifiedDateTime] [datetime] NULL)
GO
CREATE TABLE [dbo].[CmnLink]( [Id] [int] IDENTITY(1,1) NOT NULL CONSTRAINT PkCmnLink_Id PRIMARY KEY, [UniqueName] [varchar](52) NOT NULL, [IsVisible] [bit] NOT NULL, [CreatedDateTime] [datetime] NOT NULL DEFAULT GETDATE(), [ModifiedDateTime] [datetime] NULL)
GO
CREATE TABLE [dbo].[CmnLinkCmnLanguage]( [LinkId] [int] NOT NULL CONSTRAINT FkCmnLinkCmnLanguage_LinkId FOREIGN KEY (LinkId) REFERENCES CmnLink(Id) ON DELETE CASCADE, [LanguageId] [char](2) NOT NULL CONSTRAINT FkCmnLinkCmnLanguage_LanguageId FOREIGN KEY (LanguageId) REFERENCES CmnLanguage(Id) ON UPDATE CASCADE ON DELETE CASCADE, [CreatedDateTime] [datetime] NOT NULL DEFAULT GETDATE(), [ModifiedDateTime] [datetime] NULL)
I have a problem, in one of my db's I have a table tblpersons in schema web the rest of the table's in the db are in schema dbo. Now I removed the user web, but I want to change the schema of tblpersons from web.tblpersons to dbo.tblpersons. I created a stored procedure with the line " ALTER SCHEMA dbo TRANSFER web.tblpersons", when executing this I get an error that the table tblpersons couldn't be found.
View 4 Replies View RelatedHi all,
i m using sql server2005 CTP...i created a database called TEL and in that database i created a user(in security) as
USE [TEL]
GO
/****** Object: User [COLL_DB] Script Date: 09/27/2005 15:38:51 ******/
GO
CREATE USER [COLL_DB] FOR LOGIN [loginName] WITH DEFAULT_SCHEMA=[COLL_DB]
Now,when i m trying to create a table in the database TEL as
CREATE TABLE [COLL_DB].abc (c numeric)
commit;
it gives me error saying
The specified schema name "COLL_DB" either does not exist or you do not have permission to use it.
Now,can someone tell me...what i have to do to fix this error?????????
thanks...
Hi Gurus,
I am looking for a script which lists me the differences between two table schemas.
Thanks in advance
Srini
We currently have all tables in the dbo schema, but for organizational reason we would like to split them up in multiple schemas and I wonder if that can be done without re-creating the tables.
So my question is, is there a way to move a table into a different schema without re-creating it? (For those familiar with Postgres I'm looking for an equivalent to "ALTER TABLE foo SET SCHEMA newschema") sp_rename only allows a "one-part name" for the new name, so apparently that cannot be used.
I have created a table on SQL Server from SAS. The table gets created fine. However, the table schema has my user ID in it (AD-ENTmyuserid.Table1). How can I change the schema to dbo.(dbo.Table1)? It's fine if I have to make this change in SQL Server Management Studio.
View 4 Replies View RelatedI am more familiar with writing SQL for Oracle than MS SQL Server. Within Oracle there is a simple command, 'Describe', which actually shows the data types, and whether or not an attribute accepts NULLS. MS SQL Server does appear to support such a command, however I am looking for a way to describe the attributes of tables nonetheless.
View 4 Replies View RelatedHi,
I am a bit confused and wish to share this with you for help. We are designing a billing application to bill telephone calls. It currently handles a single rate plan. So what it does is that it looks up the RATES table and matches the called number area code with the RATES.ACCESS_Code field to find the tariff for that area and multiplies that by the number of minutes. Here is the current schema.
CALLS
•ID (pkid)
•Called Number
•Duration
RATES
•Destination Name
•Access_Code (pkid)
•Tariff
Now the problem is that we need to process calls based on RATES per OPERATOR. Each operator is a telephony carrier with similar RATES. However, each call will be prefixed with a number to indicate which operator carried that call. Accordingly, the database should relate that prefix with the proper operator and then looks up the RATES that are related to that operator.
In conclusion we will have a replica of the RATES table for multiple operators. An operator is only supposed to have two fields I guess (name and ID).
So now we need to re-engineer the schema to adapt to this situation.
Eg. 95004433313445 (Will be identified as BT operator)
93004422376234 (Will be identified as AT&T operator)
Can anyone help please?
PS: we are using SQL Express 2005
Thanks
I created a schema, Admin. I have to transfer a table from the dbo schema to the admin schema. I keep getting an error that I do not have permission or the table does not exist.
Simply looking for confirmation here - is my syntax correct?
ALTER SCHEMA Admin TRANSFER MyShop.Addresses;
(MyShop is the Database, Addresses is the table)
NOTE: When I created the schema, I did not create an inner table. The syntax for that was simply CREATE SCHEMA Admin;