I have an mircosoft access database, but now i want to attach it to MSDE, how can i do impliment this????
i already try to use the following commands
exec sp_attach_db 'example','c:example.mdb'
but i got the following error message
The header of this file 'c:example.mdb' is not a valid database file header. The FILE SIZE property is incorrect.
hi!
I'm trying to configure MSDE. I think it's ok, but now I don't know how to attach the database. It's only copy paste to the data directory??? If not how this is done? I don't see any configuration tool for it...
Thanks in advance!
Liliana
I have a medical records system, SoapWare v4.90, that uses MSDE (SQL2000) databases. Due to the 2gb limitation, I am trying to migrate over to SQL 2005 (Standard or Express) which I have heard works fine. The SoapWare has a datamanager that allows me to log in to the MSDE instance, detach the SoapWare databases from msde (as well as do backups, etc) which I can confirm are detached.
Then I log back into a SQL2005 database instance using the datamanager and try to attach the database. This is what their pictured instructions demonstrate. However, I get the following error:
Database 'sw_charts' cannot be upgraded because it is read-only or has read-only files. Make the database or files writeable, and rerun recovery.
Of course, some of the entries will be read only, since doctors have to sign off the charts and are not allowed to subsequently change them. But I should still be able to switch over to sql 2005?!?!?!?
Or... is there a way to attach the databases to SQLExpress manually?
Help pls?
Hi I'm creating a database instance with the MSDE 2000 using the Command line(executing a batch File) and once the installation is finished(from the same batch file) I'm trying to attach a database to it. but the database is not attached to the database. but when I go to the sql server and register this new database and run the same command the database is attaching.
can any one suggest how to do this without going to Enterprise manager and registering the database again.
-regards
GRk
my commands I'm using to create is (Batch FIle)
CD
CD test
sqlrun01.msi targetdir="c: estmssql$test" datadir="c: estmssql$test" securitymode=SQL disablenetworkprotocols=0 sapwd="sa" instancename="test"
cd
c:
cd
move C: est1 est_Data.MDF c: estlmssql$testmssql$testData
cd
move c: est1 est_Log.LDF c: estlmssql$testmssql$testData
CD
osql -U sa -P sa -S GRKPC estl -q "EXEC sp_attach_db @dbname=N'TestDB', @filename1=N'c: estmssql$testmssql$testData est_Data.MDF',@filename2=N'c: estmssql$testmssql$testData est_Log.LDF'"
I have a medical records system, SoapWare v4.90, that uses MSDE (SQL2000) databases. Due to the 2gb limitation, I am trying to migrate over to SQL 2005 (Standard or Express) which the company says works fine. The SoapWare has a datamanager that allows me to log in to the MSDE instance, detach the SoapWare databases from msde (as well as do backups, etc) which I can confirm are detached.
Then I log back into a SQL2005 database instance using the datamanager and try to attach the database. This is what their pictured instructions demonstrate. However, I get an error:
Database 'sw_charts' cannot be upgraded because it is read-only or has read-only files. Make the database or files writeable, and rerun recovery.
Or... is there a way to attach the databases to SQLExpress manually?
Help pls?
HiI am just starting my first .NET project using the web matrix and an MSDE database. I am pretty much at the limit of my knowledge - all very interesting. I have some data in an Access spreadsheet (6 columns and 365 rows) which in the past I have copied and pasted into an Access database table. How do I get it into a MSDE database table? This process does not need to be automated/programmed as I will only have to do it once a year. Any ideas on the easiest way forward would be much appreciated.Thanks in advance.Mike
View 2 Replies View RelatedHi all
I have MSDE installed on my machine to support off-line use of a web application.
The database (MDF) file in question is stored on an encrypted area of my hard drive, which must be unlocked each time the machine starts up by the user entering a password.
Unfortunately, by this time the SQL Server service has already started, and although it still lists the database along with master, etc, it cannot access it. I believe the error mentions that some files are unavailable.
Stopping and restarting SQL Server using Service Manager fixes this problem. However, this can only be done when logged in as Administrator. I need to find a solution for normal users without Admin privileges.
Is there any other way of making the now-unlocked MDF file available to SQL Server? I thought about using SQLDMO to Refresh databases, but no joy.
This is a real show stopper for my application, which I've spent three years developing! It goes without saying that I'm writing this message with a long face. If anybody has any suggestions I would be very happy to hear from you!
Best wishes
Rob
hi,
I need to choose a database based on the following criteria (using .NET app):
1) a light but fully functional database, preferably with the support of store proc and constraints, less than 8000 transaction a day.
2) portable or the database can be export/import very easily
3) reliable and stable
4) least maintenance
I have two db in my mind, Access and MSDE?
Does anyone have some hand-ons experience on the above two? Or any other better suggestions?
Any advice is appreciated.
thanks,
bryan
In Access 97, I am trying to attach to a table in my SQL Server 2000db.I use File/Get Data, which displays all the SQL tables including theone I can't attach to. (I can attach to all the other SQL tables.)But, when I select that table I get a message that tells me the nameis invalid. I don't understand this because it gives me the name inthe Get Data dialog, and I don't have to enter it manually.Any ideas?Thanks,Bob C.
View 3 Replies View RelatedI'm using SQL Server Management Studio eExpress and I'm tryng to link to a database created in Visual Web Developer Express. My problem is that I can't see large parts of my file system when I try to attach a database in SQL Server Express. Web Developer Express likes to put its databases in C:Documents and Settings<User Name>My DocumentsVisual Studio 2005WebSites<Site Name>App_Data. However, when I try to attach a database in that location to SQL Server Express (Right Click Databases node, select Attach from the shortcut menu then Add from the Attach Databases dialog) I get a folder tree that won’t let me go any further than C:Documents and Settings<User Name>. There seem to be large parts of my folder structure that I cannot access with this dialog.
Just in case this is a permissions issue, I am using Windows XP Pro on a stand alone machine. I log on as Administrator, and the <User Name> in the above paths is Administrator. The Administrator is a member of the Administrators group. I have never logged on as anything else and never made any changes to the way permissions are set. When I start SQL Server express I select Windows Authentication.
TIA
I had few databases developed in SQL Server 2005 Developer Edition. I have detached all the databases and stopped developing anything new other than taking reqular backup of detached .mdf and .ldf files. I installed Vista on the other Hard drive that corrupted my XP installation drive letters so I had to reinstall XP OS. I have reinstalled SQL 2005 Dev edition. Now I am trying to attach the database it is giving error of Operating system error 5: "5(Access is denied.)". I tried to copy those .mdf and .Ldf files through windows explorer and it is not letting me copy past in the other place. I am getting Access denied from OS. I have about 5 databases and only one has this problem.
What is going on and how do I solve this? Is the OS has locked the file? My home computer is not in a domain. I tried to right click the file to see if I can set access permission on the file. There is no such security options. Any help is appreciated.
Thanks,
Vijay
An attempt to attach an auto-named database for file C:WebApp_Dataaspnetdb.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
My web.config file, the connection strings
<connectionStrings>
<add name="POAdatabaseConnectionString1" connectionString="Data Source=sss;Persist Security Info=True;Initial Catalog=POAdatabase.mdf;Integrated Security=SSPI" providerName="System.Data.SqlClient" />
</connectionStrings>
I cann't really find the statement for attaching aspnetdb.mdf. I don't where to find it. Is there any other web.config file in the C drive? Thanks for help!
I need to make a website with lots of datatables, ans connections bettween them.
who's better? MSDE or access? WHY? WHYNOT?
...thanks
Hi,
I don't have Visual Studio, so I'm using web matrix and MSDE. My question is, how do I get to MSDE? I don't have the enterprise manager that comes with SQL Server. Thanks
amit
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
If I detach a database on a server, then attach the database with asingle file only using the data file...will I lose any transactionsthat were in the original log file? There is a debate going on here atwork where some people think that during the detach, transactions inthe log file are saved to the data file.Thanks!
View 4 Replies View RelatedI've created a database inside my ASP.net project, the database is in the App_Data folder as exepcted.I can't run the aspnet_regsql until I have attached it using SQL Server Management Studio, but when I try to attach the database it doesn't let me navigate through my folders properly. The database is in C:UsersWardieDocumentsFirstProjectApp_Data but SQL SMS only lets me navigate to the folder C:UsersWardie and no further for some reason, meaning I can't attach the database and can't use the aspnet_regsql service to create the membership tables.Does anyone know how to fix this?
View 3 Replies View RelatedHi guys,
I had user who would like attach trial database and de-attach database when he do development. I do not want him had any other permission except the database he attach. I give him database creator role. But it did not seems work. I have to give him database creator role and system admin role also. Any one have better ideas about this?
Thanks for help
Helen
Basically says chain linkage mismatch
Any way to fix this?
hi ,
i want to use a database that someone created in SQL SERVER 2000/WINDOWS SERVER 2003.My system is SQL SERVER 2000/XP SP2 PRO .The problem is that the database is an unknown file .I mean ,it isn't ,as usually, an .mdf or .ldf file ,so i cannot attach it to the server.
Is there a problem in compatibility between the different versions of windows?Or is missing something from the database?What can i do?
Thanx in advanced
I want to attach a database that one of the developers had detach it. The LDF file was deleted after detach.
I tried to attach and rebuild the log file in SQL2005 using the following:
USE [master]
GO
CREATE DATABASE [Test] ON
(FILENAME = N'G:MSSQLDataTest.mdf')
FOR ATTACH_REBUILD_LOG
GO
I get the following error:
File activation failure. The physical file name "D:MSSQLDATATest_log.LDF" may be incorrect.
The log cannot be rebuilt because the database was not cleanly shut down.
Msg 1813, Level 16, State 2, Line 1
Could not open new database 'Test'. CREATE DATABASE is aborted.
What should I do?
Thanks,
Canada DBA
I have a database on a server and want to put it my local laptop that also has sql express. I attached the db, I see it in Management Studio but it does not show up in
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData so my app is not working correctely. How do I get the db to show up in the MSSWLData folder. I'm a bit confused.
That's the error I get.Please help
'
TITLE: Microsoft SQL Server Management Studio Express------------------------------Failed to retrieve data for this request. (Microsoft.SqlServer.Express.SmoEnum)------------------------------ADDITIONAL INFORMATION:An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)------------------------------C:Program FilesMicrosoft SQL ServerMSSQL.3MSSQLDataMyNewDB.mdf is not a primary database file. (Microsoft SQL Server, Error: 5171)
Hi,
I have a database that I developed using both Toad for SQL and SQL Server Managment Studio.
All was working fine. I could connect to the database with one of the above and also run two an applications I developed (one in C# and One in VB.NET using VS Express) using the standard SQLConnection class.
the following connection string worked fine...
Server="(local)"; Trusted_Connection="yes"; Database="CDEvolution";
Now, for one reason or another I decided to create a new data source in my Visual Studio project and pointed it to the database fine.
At first it seemed ok as I could see all tables from teh database. However somethign strage has happened. I now can't access the database in TOAD or SQL Server Managment Studio. I also couldn't connect using the above string.
I finally managed to get the two appllications I developed to access database using the following connection string...
Data Source=.SQLEXPRESS;AttachDbFilename=C:Program FilesMicrosoft SQL ServerMSSQLDataCDEvolution.mdf;Integrated Security=True;Connect Timeout=6000;User Instance=True;
and the applications work fine, however I can access the database using the DB tools.
In SQL Server Managment Studio I remove the database and tried to attach it again but I keep getting the following error message...Could not find row in sysindexes for database ID 5, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes.
Could not open new database 'C:PROGRAM FILESMICROSOFT SQL SERVERMSSQLDATACDEVOLUTION.MDF'. CREATE DATABASE is aborted. (.Net SqlClient Data Provider)
Any ideas on how I can get access back?
Cheers in advance,
Kevin
Can not attach database,
Error message;
The file you've specified is not a valid SQL Server database file.
My costumer HDD some files Deleted mybe elektric prblem -Elektric
go,com,go,come- then windows not opened.
insert corrupt hdd Another computer, then recovering (recover my files
software)
Recover mdf and ldf files. but I can not not attach mdf. file,
I am recovery .mdf file http://www.officerecovery.com/mssql/ some table ok.
but my importand table is not ok.
if I can recover another recovery software , my database correct recover or
same.?
I am using RecoverMyFiles.
Pleace help me.
Thanks.
Hi,
We are trying to attach a Database from SQL7 to SQL2K SP3.
On SQL7
The Database was detached and the MDF copied to the New Server.
On SQL2K
We used the attach Db (in Enterprise Manager).
We get a red 'x' as normal against the logfile and noramlly it would create a new one when u proceed, but this time we are getting an error after the dialogue box asking to create a new one:
Error 1813: Could not open new database 'dbname'. CREATE DATABASE is aborted.
Device activation error. The physical file name 'd:mssql7datadbname.ldf' maybe incorrect.
The path is where the logfile resided on the old server.
Regards
John.
Hi i am upsizing a db from access to msde. I provide it a username and password.
But when i try to connect to the db in Visual Studio i get this error
"Login failed for user 'user': Reason. not assocaited with a trusted SQL Server Connection"Thanks
Hi,
I have a customer with Office 2000 and uses Access 2000. I normally use SQL/7, but for this job would it be save to use MSDE on the web site so the customer can upload and download the MSDE file for product information? I use SQL/7 for the backend. Please advise.
Duane
hi,
I have a database in MSDE. Now if I create a database in Access, is it possible to import the msde tables into Access. probably not right?
Thanks
Does anyone know if it is possible to replicate a database from MSDE to Access 2002??
View 3 Replies View RelatedHi everyone,In using the SQL Server Database Wizard in Access 2000 to create a newaccess project, I get two consecutive error messages and then the wizardshuts down. The first, which apprears immediately after starting the wizardis a message box stating something like "the property value is too large".After clicking through and filling out the values in the connection anddatabase dialog, I get a second dialog box with the message "Overflow" andthe wizard terminates.My operating system is Windows 2000 Professional with Access 2000 and MSDE2000.Does anyone have any thoughts about what might be causing these errors?Thanks in advance.
View 3 Replies View RelatedI want to move my Access 2K database into MSDE. The Access UpsizingWizard crashes (a known bug wi A2K), so I'm using the followingsuggested method:Access --> New --> Project (Existing Database)This asks for the name of the .adp file to create and then launchesinto the Data Link Properties dialog box (so far so good) I select myMSDE server from the drop-down, enter the sa account & passwd, attacha database file and try to select the .adp file that was just created.Unfortunately, the "Select SQL Server Database File" dialog is lookingfor an .MDF file, not an .ADP file.If I try to kludge it and select the .adp file anyway, the TestConnection produces an error:"Test connection failed because of an error in initializingprovider. The header file "D: est.adp" is not a valid database fileheader. The FILE SIZE property is incorrect."Any suggestions on how to proceed?Note:I've got Access 2000 SP1, Visual Studio.Net 2002, MSDE and SQL WebAdministrator running on XP Prof SP2.
View 3 Replies View RelatedI know that SQL Server cost plenty to license for internet use...per year. But is there the same costs for MSDE and/or Access? I was recently told that every internet user would have to have a license to use a site that had Access as the database. I'm really not sure how true that is or if its MS support fobbing me off. Anyone know?
View 4 Replies View Related