How Can I View The Design Of The Ssis Package After Migration
Jun 8, 2007
OK, I was able to successfully migrate all of my DTS packages to SSIS, for SQL 2005. I can log into intergration services and see my packages listed under:
servername --> stored packages --> msdb. Now my question is, how can I open these packages, not run them open them in a design mode like you can in SQL 2000, you can double click on the package name and view the design of the package. how can i do that now that I have them in SQL 2005?
View 6 Replies
ADVERTISEMENT
Feb 21, 2007
Hello,
I have designed a quite small SSIS package and everything worked just fine .
Untill I moved the SSIS project folder to another solution folder and added whole solution to Visual source safe.
Since then opening the package for design has become unbelievably slow, debugging it even worse.
I think the cause is in moving the SSIS project folder. But I have no idea how to fix this.
Any suggestions ?
Janez
View 10 Replies
View Related
May 15, 2008
Hi
I am busy designing a ETL solution and have a question about how to design the packages.
We have over 30 source systems for different customers. We are building a WH that will combine all this data for analysis. The main issue is that these systems are always at different versions of the software. When a patch is released, it usually goes to one or two for a Beta process before it moves to the rest. These patches can affect the DB design, and we would want to be able to extract any new data as it comes available from the systems that have it.
Solution 1 - Package Versions
The idea was to create the SSIS packages with a version number in their name. For each change, you would create a new version. The Batch control application that is being developed will store which system needs to use which version of the package.
Solution 2 - Multiple paths within a package
This was to create a single package for each table, with a conditional split as the first task. The batch system will still provide which path the package needs to take with different Data Flow tasks containing the different column mappings.
Both have pros and cons, but was wondering if anyone has experience with this type of setup and which way worked best, or if there are any other options.
Many Thanks
Michael
View 3 Replies
View Related
Nov 28, 2006
Greetings SSIS friends,
I am in the process of designing a package for populating a Dimension table for my new data warehouse. I would like to discuss with you my proposed solution in the hope that some of you will be able to advise me on any mistakes that I have made so far.
I have 3 source tables which are used to populate my Dimension table (I will restrict each source table to a few columns to keep this simple).
The source tables are :
Meetings (MeetID, NameID, Meeting_Start_Date, Meeting_End_Date, Meeting_Time_Stamp)
Events (EventID, MeetID, Event_Start_Date, Event_End_Date, Event_Time_Stamp)
Names (NameID, Long_Name, Short_Name, Names_Time_Stamp)
My Dimension table structure is very basic as follows :
Product_DIM (EventID, MeetID, Meeting_Long_Name, Event_Long_Name..... Meeting_Time_Stamp, Event_Time_Stamp)
Please note that I haven't included the start and end dates to keep this simple, but in my real solution, the Dimension table has many more columns.
The Meetings and Events tables contains hundreds of thousands of records so when my package is run, I should only retrieve information that has changed since the last time my Dimension table was populated. This is why I store the time stamps in my Dimension table.
So when my package runs, I get max(Meeting_Time_Stamp) and max(Event_Time_Stamp) from my Dimension table then retrieve all records from the source table where their timestamps are GREATER than the max values.
The problem is this :
If in the source system, an event is changed, the time stamp associated with that record will change value but the meeting record associated with that meeting will not have its time stamp changed.
How do I ensure that when my package is run, I retrieve all meeting and events information even if one hasn't changed?
Should I build a table made of IDs?! And if I do need to build a table made up of IDs, should I store this as a permanent table in my database or is there an SSIS data structure I can use to hold this information?
I hope this makes sense!
View 5 Replies
View Related
Oct 20, 2006
We are downloading 4 large (500mb) zip files in the package. Those come from 4 different FTP sites. Sometimes the FTP download on one of those fails.
Zip files contain images which need to be uploaded for existing listings. Each zip file is processed the exact same way. The question is how can I make the SSIS package so that each downloaded zip file can be processed immediately after the download - and not duplicating the processing logic?
View 3 Replies
View Related
Apr 2, 2008
Hello,
I am new to SSIS. I need to transfer data from SQL Server 2005 Operational Database to SQL Server 2005 Report Database. The upload needs to work every night. There are few master tables and remaining are transactions tables.
I am planning to create 2 packages one for master tables and other for transactions tables.
Is it the good approach?
Also few of transaction tables are heavy in terms of number of records. Will it better if i further break them in many packages?
I am using book "Microsoft SQL Server 2005 Integration Services Step by Step".
Can you suggest any other good book?
Regards,
Shailendra Shelar
View 7 Replies
View Related
Nov 21, 2015
Win 7 SP1 x64 PC. I installed SQL Server 2014 Dev Edition + Visual Studio 2015.
I'd like to create some basic ETL SSIS packages, and I worked very comfortably in 2008R2.
For 2014, I started with this tutorial:[URL]However, it says to go to Start->All Programs->Microsoft SQL Server->SQL Server Data Tools.
I did explicitly install SSDT when I installed VS2015. I also installed it separately. I see SSDT listed in Programs, and SSIS is running according to SQL Server Config Manager, and Services. Half of Microsoft's docs seem to be 2012 era, which is a shame because 2014 is out and it's nearly 2016...
how do I get to the GUI where I can design ETL packages?
View 7 Replies
View Related
Jan 4, 2008
When I open my SSIS package in VS2005, the designer shows the very bottom right of the control flow design area where none of my package objects are so the screen appears blank. I have to move the scroll bars up and to the left to view my package. Is there some setting to change this behavior?
View 9 Replies
View Related
Jul 27, 2015
We are migrating sql server Stored Procedures from 2005 to 2012.We are facing some conflicts(Keyword changes) while migrating into 2012. We are executing each and every stored procedure and finding some keyword changes.We have nearly 2000 stored procedures. It is a time consuming process.
What are the best way to find out the changes in 2012. Anyscript(Sql server) to find out/what are the changes need to be change in 2012.
View 3 Replies
View Related
Aug 17, 2007
Hi i tried designing a SSIS package which loads only those rows which were different from existing rows in the table , i need to timestamp the existing row with an inactive date when a update of that row is inserted (ex: same studentID )
and the newly inserted row with a insert time stamp
so as to indicate the new row as currently active, in short i need to maintain history and current rows in same table , i tried using slowly changing dimension but could not figure out, anyone experience or knowledge regarding the Data loads please respond.
example of Data would be like
exisiting data
StudentID Name AGE Sex ADDRESS INSERTTIME UPDATETIME
12 DDS 14 M XYZ ST 2/4/06 NULL
14 hgS 17 M ABC ST 3/4/07 NULL
New row to insert would be
12 DDS 15 M DFG ST 4/5/07
the data should reflect
StudentID Name AGE Sex ADDRESS INSERTTIME UPDATETIME
12 DDS 14 M XYZ ST 2/4/06 4/5/07
12 DDS 15 M DFG ST 4/5/07 NULL
14 hgS 17 M ABC ST 3/4/07 NULL
Please provide your input as much as you can even though it might not be a 100% solution.
View 4 Replies
View Related
Oct 23, 2014
"SSIS 2012 Catalog doesn't have option to give read access to SSIS Catalog to view package run reports" ... Any luck allowing power developers / operators access to READ the SQL 2012 SSIS Execution Reports without granting them SSIS_Admin or Sysadmin?
According to this link posted back in 2011 (w/ Microsoft's feedback in Nov 2011: "We’re closing this issue as “Won’t Fix.” At this point the bug does not meet our bar for resolving prior to SQL Server 2012 RTM. As we approach the SQL Server 2012 release the bar for making code changes gets progressively higher." URL....Regarding Permissions to SSIS Catalog, here are the findings. We can give access in three ways:
1. READ Access – We can provide a user db_datareader access. With this the user can see the objects within the SSIS catalog database, but cannot see the reports.
2. SSIS_ADMIN – Add the user to this database role in SSISDB. With this the user can view the reports. But it also provides them privileges to modify catalog information which is not expected. We can add it using below script EXEC sp_addrolemember 'ssis_admin' , 'REDMONDPAIntelAnalyst'
3. SYSADMIN - Add the user to this server role. This will make the user an admin on the SQL server. This is not intended. Is there any method available which will have provision to give read only access to see SSIS Catalog package execution reports and not having modify Catalog access.
View 1 Replies
View Related
Aug 30, 2006
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
View 7 Replies
View Related
Jan 11, 2007
I've been migrating SQL 2000 DTS packages into SQL 2005 using the Migrate DTS 2000 Package wizard in Visual Studio 2005. All packages migrate fine except one which throws out the following error:
exception of type 'Microsoft.SQLServer.DTS.MigrationWizard.HelperUtility.DTSMWException was thrown
No other supporting information is given to help diagnose the problem. Has anyone else come across this error before? Looking at past threads, I've checked the DTS package for leading or trailing spaces which might cause an issue and there are none.
Thanks.
View 3 Replies
View Related
Mar 13, 2007
In Visual Studion I invoke the wizard, indicate the source for the DTS packages and pick a folder for the migrated package but I don't get a list of my source packages. Instead, I get the error message, 'index out of range, must be non negative, parameter name index(mscorlib)'.
Has anyone ever gotten this error. What does it mean and how can I fix it?
Thanks in advance,
View 1 Replies
View Related
Apr 19, 2007
I have a two questions that hopefully someone can assist.
Question 1
We use the XML file option to store configuration information for our SSIS packages. It seems that the XML configuration files are not being used in all instances even though we specify the file in SQL Agent. From what Ive seen, properties like server name and SQL user id are being pulled from the XML configuration file. Other types of references in the configuration file like email addresses for a send email task are not being pulled.
The way I determined this is that I manually edited the configuration XML file on SQL Server. Changes done to email addresses in the configuration file are not used when I run the package via SQL Agent. But changes to server name and/or SQL user name are used.
If we run the deployment wizard and update the email addresses via the Wizard, the changes are reflected in the configuration file and the SQL Agent job picks up the changes. It seems a waste to have to rerun the SSIS migration wizard just to update the configuration XML file.
We are using SQL Server 2005 SP 1. When we deploy SSIS packages, we run the deployment wizard and choose the following options:
SQL Server deployment and check the Validate packages after installation.
Specify SQL Server, Use Windows Authentication, and check the Rely on server storage for encryption
Update information in the configuration file within the wizard
Question 2
When we migrate SSIS packages on the production server, we get the following error message during the Package Validate step: The SSIS logging provider has failed to open the log. Error code: 0x80070005. Could this be caused by differences in the SQL directory structure between the Development and Production Servers? On the Development workstation and the Development server, a directory called C:Program FilesMicrosoft SQL Server90DTSLogProviders exists. On our production server, this folder is located on D:Program FilesMicrosoft SQL Server90DTSLogProviders.
View 7 Replies
View Related
Jul 25, 2001
How do you get the design view of a table in sql server query analyser?
I know in oracle its desc table_name.
Thanks
View 6 Replies
View Related
Nov 22, 2005
hi
suppose that i have 2 tables:
TBCars(Keep information about one car like model,plaqueNo, owner,...)
&
TBServices(keep service information,like serviceType,serviceDate,..)
in this system, when a car for a first time enter to this system, i insert 1 record for it into TBCar, from second time, every time this car enter to system, one record inserted into TBServices(that refer to 1 record in TBCar,1-& relationship).
now i build a VIEW with these fields:
IDCar,Model,PlaqueNo,Owner,ServiceType,ServiceDate
the expected result from this view, return n record that n is number of records in TBServices. but i want 1 record in result for every car in TBCar.
in this result grid, serviceDate & serviceType is the last record inserted into TBServices.
& i want records in TBCars that dont have any child in TBServices come into my VIEW.
View 1 Replies
View Related
Jul 23, 2005
Is there a way to allow users to see the design view of a table withouthaving dbo permissions?Thanks
View 1 Replies
View Related
Jun 10, 2015
i have a question about updating views:for example: lets assume we have a table which keep the users score and we have a view which created from so many tables and calculate the sum of the users scores. now if one of the user's score changes all the view created again or just part of the view will update?i ask this to find out how can i design my database? how can calculate users scores?i can wrote a trigger to do it or use the view. which way is faster and better in this case?
View 9 Replies
View Related
Nov 10, 2005
I am unable to migrate any DTS packages, from a SQL Server 2000 package, from a structured storage file, or from a DTS package imported into SQL2005 (Developer Edition, 32 bit). Running the Package Migration Wizard, every time I get to the List Package screen, i get the error below. I haven't found any other mention of this so far. Anyone else seen this error or have suggestions?
View 20 Replies
View Related
Apr 10, 2008
Have a View where I need to enter a conditional IF_THEN_ELSE statement in a new field (field has an alias). If this were an Access query I would do following:
IIf([dbo.AR1_CustomerMaster.EmailAddress] Is Null, "A", "B")
How can I accomplish same in View design??
View 2 Replies
View Related
Feb 28, 2008
I need to control DOF (date of order) which data type is datetime for today's date.
I use 1) or 2) but got null.
1) = getdate(),
2) = DATEADD(day, DATEDIFF(day, 0, GETDATE()), 0)
I use
between '2/28/2008' and '2/28/2008'
will get result.
How to get today's date?
View 7 Replies
View Related
Nov 3, 2006
Even though I select "Column Names" in Design View when creating a query (or view), only "* (All Columns)" appears in the table box.
In InfoPath, when I connect a combo-box, err drop down box, to the database, I am unable to connect directly to a table... no tables are shown. If I select a different database, these problems do not exist.
I can not find any setting to allow these columns to be shown in the design view or any setting that will "expose" the tables in InfoPath.
I tried creating a new database and exporting the data, tables and data, from the troubled DB to the new DB; however, the new DB exhibited the same behaviour. The system tables, Master and Model, have the same behaviour. Please help me with your ideas and suggestions... thank you very much for your time.
This database was upsized from Access 2003 to SQL Server 2000 SP4.
rogge
View 7 Replies
View Related
Jun 9, 2015
I would like to alter view to add columns. My base table is populated by application and the base table name is always change. Is there any way to add some extra columns to this view.
One way is to create a sp to add columns and use the view inside the sp. But I would like to know is there any way to alter the view.
View 4 Replies
View Related
Aug 4, 2015
I have a cube. Its xml is different at some point than its design view. Suppose for some dimension and its attributes, source table is different than what it showing in the properties window for them..
Is this possible? How to read cube xml because there are repeating tags in it. There are two type if dimension tags.. one has only attributed and other has all properties.
View 7 Replies
View Related
Nov 12, 2007
I have a problem with this ActiveX Script. I need to find out why I'm getting this error message: "retrieving the file name for a component failed with error code ..." I think it has something to do with my global variable setting. Am I right? Help please.
'**********************************************************************
' Visual Basic ActiveX Script
'************************************************************************
Function Main()
Dim fn
Dim mm, dd
mm = Month(Now)
dd = Day(Now)
'Padded a 0 in front of the month if its less than 10 to maintain the YYYYMMDD format
If cInt(mm) < 10 then
mm = "0" & mm
End If
'Padded a 0 in front of the month if its less than 10 to maintain the YYYYMMDD format
If cInt(dd) < 10 then
dd = "0" & dd
End If
'Dev Server
fn = "D:Documents and SettingsUserDesktopDTSMigrateSamplesAEC_" & Year(Now) & mm & dd & ".txt"
dim oPackage
dim oConn
set oPackage = DTSGlobalVariables.parent
set oConn = oPackage.connections("HR Feed")
oConn.datasource = fn
set oPackage = nothing
set oConn = nothing
Main = DTSTaskExecResult_Success
End Function
View 3 Replies
View Related
Jan 10, 2006
Good Day,
I am currently in the process of migrating my DTS packages to SSIS---one at a time---and have come accross the following error during the excecution of a "Copy SQL Server Objects Task". The exact error is:
[Transfer SQL Server Objects Task] Error: Execution failed with the following error: "Version80 database compatibility level is not supported.".
What I am doing with this particular task is to copy a table(s) from another SQL Server, to the current SQL Server. The original location is a SQL2000 DB table. In the near future the source server for this table will be a SQL 2005 server but not until the current migration has been completed.
I have looked at all of the properties, but can not find anything relating to the db compatibilty level. Is there an easier way? Or a setting that I can change to accomplish what I am trying?
Thanks for any help/suggestions.
View 8 Replies
View Related
Sep 6, 2007
Hi everybody,
I would REALLY appreciate it if some had a link to a good tutorial about migration from DTS to SSIS, but without visual studio . net.
For example I need to use DTS package in sql server 2005 and execute them, I used migration wizard (SQL 2005) but it didn't work because i have in my computer sql 2000 et sql 2005 and the server name is PC2, however when i use the server source PC2 and the server destination PC2 an error message appear "server destination should be a sql server 2005 instance ".
help me please..
Thanks very much anyone response my question.
View 3 Replies
View Related
Nov 6, 2006
Well..
Have migrated my SQL 2000 DTS packages to SSIS packages through the package migration Wizard.Also, the hurdle to schedule it as a job has been resolved.But, the concern is the package contains entrieslins for old dataserver.
Is it possible to edit the SSIS pckage using management studio or integration services?
View 1 Replies
View Related
Nov 7, 2007
I have a database called ‘Objects’ which has many field. One of its fields is called ‘Image’ and has a data type image.
I want to add pictures to each one of my records offline, is this possible? i.e. by copying the address from my C drive such as C:Documents and SettingsfseyedarabiMy DocumentsMy Pictures
View 1 Replies
View Related
Jul 30, 2000
Help, is something wrong with my SL Server? I am unable to return any rows from all tables in all databases (user and system)on My SQL 7.0 SP2 machine. Whne i right click on the table in E.M and select design or open table i get no results. Does anyone know why this is happening? It did not always happen either.
Thanks
View 1 Replies
View Related
May 14, 2007
in SQL Query analyzer i get the desired result for the following querry succesfull.
But can any one help me in getting the same result in design view so that i can save this view and get the required result on my aspx page.(Web page)
A beginer !!!! not much familiar with MS SQl.....HELP>>>
USE nfxdash SELECT *, DATEDIFF(day, Date_Opened, getdate()) AS no_of_days
FROM nf_Tickets
View 1 Replies
View Related
Sep 15, 2015
I am creating a view and want to select records where the value of a Customer field (Klant Test Plan) is NULL or has exact the same value as for example customer field 2 (Klant Schedule).
I have already the code below:
SELECT DISTINCT
TOP (100) PERCENT dbo.Product.ERPKey, dbo.TestPlan.CoA, dbo.TestMethod.WorkInstruction, dbo.Customer.Name AS [Klant Testplan],
Customer_1.Name AS [Klant Schedule], LEFT(dbo.ShopFloor.ShopFloorNumber, 7) AS Schedule,
CASE WHEN Customer_1.Name = 'ItsMe BV' THEN Customer.Name ELSE Customer_1.Name END AS Customer
FROM dbo.Customer AS Customer_1 INNER JOIN
[Code] ....
View 9 Replies
View Related
