How Do I Calculate A Sum From A Table Group With The Footer
Mar 28, 2008
I have a sum , which is filtered within its table group, and then i have a fields in the footer. How would i aggregate these too together and use the result in another row within the footer.
I tried entering this:
=SUM(Fields!Period_1.Value,"table2_Period") / Max(Fields!Goal_1.Value)
but i get an error:
[rsInvalidAggregateScope] The Value expression for the textbox €˜textbox129€™ has a scope parameter that is not valid for an aggregate function. The scope parameter must be set to a string constant that is equal to either the name of a containing group, the name of a containing data region, or the name of a data set.
Build complete -- 1 errors, 0 warnings
what am i doing wrong, please help!
View 1 Replies
ADVERTISEMENT
Nov 29, 2007
I have a report (bills of lading for shipments) that uses a table to organize the data coming in and groups by customer. Each customer grouping has a header, body and footer in the table. A print run might generate 100 bills of lading, each between 1 and 4 pages long.
I have marked the group to force a new page when each new group occurs.
As it is the report runs beautifully EXCEPT that the footer prints wherever it happens to end up -- midway down the final page of the bill and looks quite goofy.
What I really need (and my client is really surprised that SSRS won't me) is to print the group footer at the bottom of the final page of each bill of lading.
Bills of lading may be several pages per customer, so until the group footer is hit, I don't want any footer info at all. As I said, it all works fine except for the final page of each bill, where the group footer occurs whereever it has ended up.
Jim
12/4/07
This post didn't get much of a response. So perhaps I should amend it -- If what I am trying to do is impossible, what would be the preferred way?
View 5 Replies
View Related
Aug 31, 2007
How can I calculate a subtotal for a Report Item? I have a textbox(lets call it "PlusMinus") in the detail section of my table, which is a calculated textbox of two others (lets call them "Budget" and "Spent"). So, PlusMinus = (Budget - Spent). What I would like to do is get a subtotal for PlusMinus. I have tried several ways, using Sum() or RunningValue, even tried to write code, but I can't seem to get it right. Any ideas??
Thanks in advance!
View 3 Replies
View Related
Mar 10, 2008
I'm trying to grab the Total for each "brand" in my table group (this is not in a matrix).
Period 1 Period 2 Period 3
Sensible Choice 2007 3843 4020 4746
2008 1830 3352 1025
Total: 1830
Maxi 2007 124388 132248 162429
2008 127729 194458 13732
Total: 127729
I want to make the total the same amount as the 2008 total per period. (everything in yellow is the group 1 (outer group and the red is the inner group. When i tried to get the value for the year 2008 and put it in the total field, i put Last(Fields!PeriodTotal.value), but it doesnt work, because sometimes it gives me the 2007 total, and sometimes it gives me the 2008 total. I dont know why. Any suggestions on how i can get the 2008 value everytime.
View 1 Replies
View Related
May 9, 2014
I am a student, and I am so confused by SQL code that calculates incomes of my contract in a year or each month of year.
I have 3 tables:
lodgings_Contract:
id_contract indentity primary,
id_person int,
id_room varchar(4),
day_begin datetime,
day_end datetime,
day_register datetime
money_per_month money
electric:
id_electric indentity primary key,
id_room varchar(4),
number_first int,
number_last int,
Sum_Number int,
money_electric money,
status bit
Water:
id_Water indentity primary key,
id_room varchar(4),
number_first int,
number_last int,
Sum_Number int,
money_water money,
status bit
Now what I want to do are statistics on how much money I got in a year or month. Here is my code to calculate incomes of year.
Select Year(day_register) as 'Year'
, Sum(money_per_month * month(day_end-day_register)) + sum(b.money_electric+c.money_water) as 'Incomes'
From lodgings_Contract a
, electric b
, Water c
Where a.id_room = b.id_room
And a.id_room = c.id_room
And b.status = 1
And c.status = 1
Group by Year(day_register)
View 4 Replies
View Related
May 5, 2008
Hi all,
i am using sql server 2005.
let me explain the scenario.
i have report where i bring perticular employee totalcall and workeddays(from sp) then in third field i wrote an expresion to evaluate avg call that is totalday/workeddays and all the three field i displayed in table [b]Now requirment is in tablefooter i need to display avg of above calculated avg call
please suggest some idea
thank you.
View 2 Replies
View Related
Mar 14, 2008
How would I get the rownumber() for a Group Footer in report designer not in my query?
I put the syntax rownumber(nothing), but it is giving me the row numbers for the detail section.
Any help would be appreciated.
View 1 Replies
View Related
Nov 30, 2007
I have a tabular report with grouping on the following fields:
Grouped rows: MDC, DrgDesc, ChronicOther
Detail row: Cases
The desired output follows:
MDC1
DrgDesc1
Chronic 50
Other 25
Total cases for DrgDesc1= 75
DrgDesc2
Chronic 20
Other 33
Total cases for DrgDesc2 = 53
etc....
I have everything working up to the Total cases for each DrgDesc. I tried adding a group footer to the Cases row, however this sub-totals for Chronic and Other rather than summing them together. Example is below.
MDC1
DrgDesc1
Chronic 50
50
Other 25
25
DrgDesc2
Chronic 20
20
Other 33
33
etc....
How can I achieve the desired result?
View 3 Replies
View Related
Apr 14, 2008
Is there any way to know you're at the last row in a group footer? I'd like to just hide all other rows except that one...
Thanks,
Steve
View 3 Replies
View Related
Dec 21, 2006
Hi,
I want to display a concatinated value of strings (DB field) having a "/" in between, for each group separately in the group footer.I tried using custome code.I was calling that code in detail.In detail it was showing correctly i.e running concatenated value for each record.But when i used the same global variable in group footer it's taking previous group's concatenated value and first groop footer shows a blank string.I guess its because groop footer thing is getting executed before the detail part.so can you please give me any solution for this.
Thanks in advance
Suchi
View 6 Replies
View Related
Jan 9, 2007
I have a report that is being called via stored proc, and i want to group by contract. when report gets generated i get multiple contracts info. but will be grouped/sorted by contract.
please how can i have a group header and also a group footer to show a summary of each contract information with some calculated fields in it.
i may get 100 records related to 10 contracts , 10 rows for each contract.
as soon as the first contract info is shown on the report it has to show a summary related to the first contract in the group footer, and then continue populating the second contract info and so on.
Please i am totally new to reporting and help would be appreciated. thank you all.
View 2 Replies
View Related
Jun 5, 2006
I am new to SSRS 2005 and so far the only way I can figure out how to edit groups in a table is to right click on the group header or footer and select Edit Group. But how would you edit the group if you chose to not have a header or footer? And how would you delete the group for that matter? I'm looking for something like the Crystal Reports Group Expert.
View 4 Replies
View Related
May 20, 2008
I am using RS 2005 with SP2. I am trying to print a table Group footer on a brand spanking new page. I have checked the "Page Break at Start" of the Group, However in the Report view the footer starts printing directly below the end of the group, and not on a new page. I have also tried to add a rectangle to the group footer and selected Page Breaks before rectangle but the group footer still doesnt print on a page of its own. I would appreciate any suggestions.
View 3 Replies
View Related
Apr 22, 2008
I've read a bunch of threads and can't seem to find an exact problem as what I'm having.
I believe my problem is simple enough to understand, but might not be that simple to solve. I'm hoping otherwise.
My report shows columns:
CustomerNumber
CustomerName
SummedInvoiceAmounts (summed from SQL query)
Region
The problem is that we have the same CustomerNumber with multiple CustomerNames:
CustomerNumber CustomerName Sum Region
ABC advancedballoon 1000 East
ABC AdvancedBall. 1000 East
As you can see they are the same company but in our Accounting system they show up mulitple times (about 20 companies like this). This is from clerks adding in multiple ways or misspelling, etc. Can't fix, but have to work around.
Anyhow, I have my detail row that shows two lines for the companies like this and one line for the companies that are correct. I have this report I have added two groups "Region", "CustomerNumber".
If I put all the detail Fields down in the CustomerNumber footer and hide the detail row the report looks fine to the eye. When adding a Sum down in the Region footer field though; it pulls in the added amount and makes the total wrong.
I tried running value, but it's basically the same as the sum for what I need and it doesn't work. Is there a simple way to do this using the reporting tool? In Crystal this was very easy, but I haven't figured this out yet. Any help would be greatly appreciated. Thanks.
View 1 Replies
View Related
Feb 25, 2008
I have a report with a table. Inside the table I have a subreport in a group footer and I want to force a page break before the footer.
I've tried putting the subreport inside a rectangle and set the rectangle to have pages breaks but that doesn't work.
any ideas?
Thanks!
View 4 Replies
View Related
Jul 24, 2006
I ran into this a few weeks ago and found that several others had as well, but no one had yet found an answer. I found the answer (at least one of the answers) this weekend and wanted to share it. I had recently added a subreport to a group footer in a table and started getting an error. Depending on the data, the error wasn't always present. I didn't have a problem when I moved the subreport to any other area in the report.
Here is the error I was getting:
An error occurred during local report processing
An internal error occurred on the report server. See the error log for more details.
It was a local report (rdlc), so naturally, there was no error log <g>. I added an event handler for ReportError and collected this information:
7/23/2006 5:18:22 PM
OS: Microsoft Windows NT 5.1.2600 Service Pack 2
*** EXCEPTION ***
Message: Exception has been thrown by the target of an invocation.
Source: mscorlib
Stack Trace: at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.UserControl.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at SX.MainProgram.Main() in C:Documents and SettingsMYeagerMy DocumentsVisual Studio 2005ProjectsSXSXMainProgram.cs:line 22
*** INNER EXCEPTION ***
Message: Reporting Service Exception
Source: SX
Stack Trace: at SX.ReportSalesForm.reportViewer1_ReportError(Object sender, ReportErrorEventArgs e) in C:Documents and SettingsMYeagerMy DocumentsVisual Studio 2005ProjectsSXSXReportFormsReportSalesForm.cs:line 84
at Microsoft.Reporting.WinForms.ReportViewer.OnError(Exception e)
at Microsoft.Reporting.WinForms.ReportViewer.UpdateUIState(Exception e)
at Microsoft.Reporting.WinForms.ReportViewer.OnRenderingCompleteUI(ProcessThreadResult result, PostRenderArgs postRenderArgs)
*** INNER EXCEPTION ***
Message: An error occurred during local report processing.
Source: Microsoft.ReportViewer.WinForms
Stack Trace: at Microsoft.Reporting.WinForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
at Microsoft.Reporting.WinForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
*** INNER EXCEPTION ***
Message: An internal error occurred on the report server. See the error log for more details.
Source: Microsoft.ReportViewer.Common
Stack Trace: at Microsoft.ReportingServices.Diagnostics.Utilities.RSTraceInternal.Assert(Boolean condition, String componentName)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteVariant(Object variant, Boolean convertDBNull)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteScopeTableValues(Object value)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteScopeTableValues(Object value)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteScopeLookupTable(ScopeLookupTable scopeTable)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteSubReport(SubReport subReport)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItem(ReportItem reportItem)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItemList(ReportItemList reportItems)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItemCollection(ReportItemCollection reportItems)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteRectangle(Rectangle rectangle)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItem(ReportItem reportItem)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItemList(ReportItemList reportItems)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItemCollection(ReportItemCollection reportItems)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteTableRow(TableRow tableRow)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteTableRowList(TableRowList rows)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteTableGroup(TableGroup tableGroup)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteTable(Table table)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteDataRegion(DataRegion dataRegion)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItem(ReportItem reportItem)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItemList(ReportItemList reportItems)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItemCollection(ReportItemCollection reportItems)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReport(Report report)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportSnapshot(ReportSnapshot reportSnapshot)
at Microsoft.ReportingServices.ReportProcessing.ChunkManager.SnapshotChunkManager.SaveReportSnapshot(ReportSnapshot reportSnapshot)
at Microsoft.ReportingServices.ReportProcessing.ProcessingResult.Save()
at Microsoft.Reporting.LocalService.Render(PreviewItemContext itemContext, Boolean allowInternalRenderers, ParameterInfoCollection reportParameters, IEnumerable dataSources, DatasourceCredentialsCollection credentials, CreateAndRegisterStream createStreamCallback, ReportRuntimeSetup runtimeSetup, ProcessingMessageList& warnings)
at Microsoft.Reporting.WinForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
This wasn't exactly enlightening, an exception in an ASSERT in the reporting services dll, but since I knew that results varied with different data, I tracked it down that way.
THE SOLUTION:
The problem occurs when data for group expression is null. If there is no subreport in the group footer, this isn't an issue, but if there is, you get the error. For instance, if your data comes from a SQL statement with a LEFT OUTER JOIN (as mine did), and the group expression uses a column that contains nulls as a result of the LEFT OUTER, this exception will be thrown. This one was VERY DIFFICULT to track down, but it's easily reproducable. It has nothing to do with what (if anything is) on the subreport, what the data the subreport uses looks like, whether there are parameters or not. It's purely having nulls in the data used by the group expression for the main report. I found that if I changed my SELECT from mytable.mycolumn to ISNULL(mytable.mycolumn, 0) the error went away.
Mike Yeager
View 5 Replies
View Related
May 2, 2008
Hi,
I accidentally unclicked the check-boxes for group-header and group footer - I meant to leave the group header in. Now, I can't get to the group to edit it! Is there any way I can get back to it?
View 1 Replies
View Related
Dec 18, 2006
Hi,
Im currently writing a report in SSRS which requires to take data in the fields, manipulate and perform functions on it then display it within its own textbox. For example the field Cost is manipulated so that a column will show the cost depreciated after 5 years.
Cost Final Cost
500 250
1000 634
700 500
Footer: Totals 1384
My problem is that within each group (as the data is grouped by its type) I need to have a sum of the Final Cost data. As this is NOT a field I cannot use =Sum(Fields!FinalCost.Value, "group_1") but rather I need to use =Sum(ReportItems!FinalCost.Value, "group_1"). I know that SSRS does not allow this, but after trying to find an answer going extensively through google and many forums, I am not able to find a solution on how to sum up the Final Cost column.
If anyone has any ideas on how to resolve this issue I will be greatly thankful,
Cheers,
Ben
View 6 Replies
View Related
Oct 19, 2007
Hello,
I am having a problem trying to do some conditional formatting on the text color.
This textbox is in the Group Footer so i essentially want change the color to red if the SUM of one field in the group is less than the SUM of another field in the same group.
I am doing this:
=Iif(Sum(Fields!YTDChargeHours)< Sum(Fields!YTDForecast), "Red", "Black")
but i am getting this error:
[rsRuntimeErrorInExpression] The Color expression for the textbox €˜YTDChargeHours€™ contains an error: Operation is not valid due to the current state of the object.
Thanks in advance!
View 4 Replies
View Related
Apr 9, 2008
How do i do a sum(IIF in a group footer. I just want to display one year total.
=SUM(IIF(Fields!Column_Text.Value="2007", Fields!Period_1.Value, 1))
This works in the details section, but gives me an error in the footer section. What should i do? PLease help, this is driving me crazy!
View 1 Replies
View Related
Sep 29, 2015
I have a group in my report that contains an empty footer row to get a better visibility. Because the row has a frame it should be hidden if its the last row on the page. How can I manage that?
View 4 Replies
View Related
Mar 6, 2007
Is there a way to generate an 'Others' field/item for a Field in the dataset and add it at the bottom of the group which is filtered for TOP N, for that field? For example, I have a table report which has a group on a field called Commodities, and I'm adding a TOP N filter to the group for getting the Top 30 commodities, and I need an Others item appended at the end of the group that gives me the total of all the commodities other than the top 30, and this group in turn has a subgroup that has top 10 Shippers for each commodity and also an Others item for the Shippers other than the top 10. My challenge is to create a row for the Others item of Commodities and calculate the Top N Shipper for this row which has the 'Others' Shipper item. I hope this is not too confusing to understand. Please feel free to ask me any questions to clarify.
Thanks in advance.
View 1 Replies
View Related
Nov 28, 2007
I currently have an Ungrouped Dataset being displayed in a Table. One of the columns include AMOUNT.
This is an example of what my report looks like atm:
==================
**Report Name**
No Name Amount
Signed By XXXX
==================
I would like to display a SUBTOTAL of the Amounts for each page and, on the final page, a TOTAL of the Amounts.
Yes the Last Page's SubTotal and Total will be the same.
Looking like:
===============================
pg1
**Report Name**
No Name Amount
Sub Total Amount
Signed By XXXX
(lastpage)
**Report Name**
No Name Amount
(<-----no huge spaces between Table/Subtotal)
Sub Total Amount
Total Amount
Signed By XXXX
=================================
Issues:
I've found a way to get a Page's SubTotal, but the way I found requires this to be put in a field on the Page Footer Section.
This means that on the final page, the SubTotal will be at the top of the Page Footer and not neccessarily directly beneath the table.
So:
1. Is there a way to move the Page Footer so that its printed DIRECTLY under neath the Page Body instead of at the bottom of the Page?
2. If not, is there a way to have the SubTotal of each Page and a Final Page Total in the Page Body section.
Cheers.
View 9 Replies
View Related
Mar 8, 2007
I have an expression in a group that calculates percent of sales:
=iif(Sum(Fields!BOOKD.Value)=0,0,IIF(Sum(Fields!NET.Value)=0,0,((Sum(Fields!BOOKD.Value)-Sum(Fields!NET.Value))/Sum(Fields!BOOKD.Value))))*100
The problem I'm having is that if both the
Sum(Fields!BOOKD.Value)=0 and
Sum(Fields!NET.Value)=0 ,
the expression returns the message #ERROR instead of a 0.
I have the initial query set to display 0 if the value is null.
,SUM(ISNULL(R.BOOKD,0))BOOKD
,SUM(ISNULL(R.NET,0))NET
I would greatly appreciate any help on how to solve this issue.
Thank Barb
View 4 Replies
View Related
Jun 15, 2015
I need to calculate the last two columns (noofgrp and grpsize) No of Groups (count of Clientid) and Group Size (number of clients in each group) according to begtim and endtime. So I tried the following in the first Temp table
GrpSize= count(clientid) over (partition by begtime,endtime) else 0 end
and in the second Temp Table, I have
select
,GrpSize=sum(grpsize)
,NoofGrp=count(distinct grpsize)
From Temp1
The issue is for the date of 5/26, the begtime and endtime are not consistent. in Grp1 (group 1) all clients starts the session at 1030 and ends at 1200 (90 minutes session) except one who starts at 11 and end at 1200 (row 8). For this client since his/her endtime is the same as others, I want that client to be in the first group(Grp1). Reverse is true for the second group (Grp2). All clients begtime is 12:30 and endtime is 1400 but clientid=2 (row 9) who begtime =1230 but endtime = 1300. However, since this client begtime is the same as the rest, I wan that client to be in the second group (grp2) My partition over creates 4 groups rather than two.
View 9 Replies
View Related
Nov 22, 2007
I have a report with a group total and a report total. The report total is the sum of all group totals. When I run the report in report manager (sql server 2005 SP2) it shows the report total on the last page of the report with the group total for teh client.
for instance the first page has
Report Title
Details
Group Total
Second Page
Details
Group Total
Last Page
Details
Group Total
Report Total
When I export the report to pdf the Report Total is printing on its own separate page which is not what I want. I would like the report total be on the last page of teh report just like shown above. The report total is in the table footer.
Pls help.
View 3 Replies
View Related
Jan 26, 2007
Well, we can add another table footer row by right-clicking on the footer row of the table and select, Inser Row Above, or, Insert Row Below.
But, I want to set different values to same properties of rows. Such as;
Row3.RepeatOnNewPage = False
Row4.RepeatOnNewPage = True
What do you say ?
-SMang the Frustrated Developer
View 1 Replies
View Related
Apr 24, 2008
Hi,
I have a table with say 10 rows. How can I sum up the first 10 rows and subtract that total from the 10th row value?
Rows 1-9 have a specific value in the dataset and row 10 has a different value so I can distinguish the rows. However I can figure out the expression I should add to the table footer?
I am trying this...
=sum(iif(Fields!recordType.Value<>1,Fields!Month1.Value,0))-sum(iif(Fields!recordType.Value=1,Fields!Month1.Value,0))
So I am saying, if the row has a "recordType" value of something other than 1 then sum it and then subtract any value where the "recordType" is equal to 1.
But I just get am "#error" on the report footer when I run it.
Any help?
Thanks
View 1 Replies
View Related
Aug 30, 2007
Here's a scenario that i'm trying to figure out.
In the table details, i return order number, item, manufacturer, and total cost of the order.
This is what it originally looked like:
Order Number Item Manufacturer Total Order Cost
1 portable DVD Company A $100
1 portable DVD Company B $100
1 portable DVD Company C $100
2 portable DVD Company B $100
2 portable DVD Company D $100
2 portable DVD Company F $100
Grand Total $600
I can get the table to look like this after hiding duplicates:
Order Number Item Manufacturer Total Order Cost
1 portable DVD Company A $100
1 portable DVD Company B $100
1 portable DVD Company C $100
2 portable DVD Company B $100
2 portable DVD Company D $100
2 portable DVD Company F $100
Grand Total $600
The problem is the grand total. It should be $200 but it takes in the all total costs in the row because I have:
=FormatCurrency(Sum(Fields!TotalCost.Value)) in the footer and it'll sum up all.
I'm stumped here. Any suggestions are greatly appreciated.
Thanks a lot for taking the time to read.
View 3 Replies
View Related
Jul 27, 2007
I'm using SSRS SP2. I have a table with 1 group defined. I have a group footer that includes sub totals for each group. I have a table footer that includes my grand totals, but this footer will NOT print on a separate page even though I have 'Page Break At End' checked for the group. My groups correctly start on a new page, but when I get to my Grand Total footer line, it prints just after the last group sub-total line.
Any ideas what I might be doing wrong?
Thanks in advance,
Dawn J
View 4 Replies
View Related
Feb 5, 2008
Hi
I know this is going to sound embarassingly obvious, but i cannot find a quick solution.
I have some data, I display that data in a table. Simple so far.
I have a table footer, which I want to display the total number of rows returned.
For example
"Total Rows Returned ="
Now I know how to get the total rows returned:
CountRows("Dataset1")
However when I try to put the two together like this:
= "Total Rows Returned =" + CountRows("Dataset1")
I just get the whole thing outputted, and no total for totalrows...
Anyone know what I am doing wrong?
View 6 Replies
View Related
Apr 17, 2007
I have a table that contains a column for a calcuated member (x) of type decimal number. When I tried to display the total of this calculated member in the table footer (=sum(x)), I am getting "#Error" instead of the sum of all displayed calculated values.
Column X
--------------
0
0.67
0.10
0.23
#Error (footer cell, expression -> =Sum(x))
=First(x), =Last(x) and =Max(x) worked fine, not sure why Sum failed. Please help...
Thanks.
View 8 Replies
View Related
Nov 21, 2007
I have a need to show a row inside a table group to simulate a header row for the data rows inside the group. The table will not have a real header or footer. Thanks for the help.
View 1 Replies
View Related
