How Is Performance If Continue Call Native Compiler SP

Jun 12, 2014

I've tested a simple insert statement using Native Compiler SP. It's was working fast if compare to normal SP. when i continuous to call the same Native Compiler SP few times. The performance is exactly same as the normal SP.

View 6 Replies


ADVERTISEMENT

Native Compiler Return Value: [BC30494] Line Is Too Long

Feb 2, 2007

I'm developing a very big and complex P&L report in RS2005 for a big bank which suppose to have 20 tables with around 12 groupings per table. This is similar like having or combining 20 reports in one big report with massive data from Analysis Services 2005 data source.

The report was successfully compiled only up to the fourth table. When I added the fifth table by copying and pasting from the fourth table and then compiled the report in Dev Studio, I've got the following error message:

An error occurred during local report processing. The definition of the report '/Profit and Loss' is invalid. An unexpected error occurred while compiling the expressions. Native compiler return value: '[BC30494] Line is too long.'.

I have carefully made sure that the fifth table has exactly the same definition as the fourth table which I copied from and which was successfully compiled.

The rdl file size is around 2.5MB with only 5 tables and if I eventually adds up to 20 tables I would expect the rdl file size could be around 10MB, which is quite large compared to normal reports.

Even though it seems does not make sense, I suspect the rdl file size getting too big for the compiler to compile the report.

Is there any maximum rdl size limit that RS2005 compiler can compile? Or any idea why this error happens?

Thanks

View 4 Replies View Related

Error Handling In MSSQL - If Error During Call Remote Stored Prcedure I Need SQL Code To Continue...

Jul 20, 2005

Hi All,I want to catch the next MSSQL error in my SQL code with following continuecalculationsServer: Msg 17, Level 16, State 1, Line 1SQL Server does not exist or access denied.If REMOTE_SERVER_1 is inaccessible (as in (a) below) the executing of SQLwill not continue with (b) - I need the code in (b) to run despite whetherthe previous exec was successful or not - Any ideas?begin transaction(a) exec REMOTE_SERVER_1...bankinsert '1' , '1' , 1 , 0 , 0(b) print @@errorcommit transactionwhere REMOTE_SERVER_1 is link to server created byEXEC sp_addlinkedserver @server = 'REMOTE_SERVER_1', @srvproduct = '',@provider = 'SQLOLEDB', @datasrc = 'MYCOMP1', @catalog = 'mirror2'EXEC sp_addlinkedsrvlogin @rmtsrvname = 'REMOTE_SERVER_1', .....Exec sp_serveroption 'REMOTE_SERVER_1', 'data access', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc out', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'collation compatible', 'true'Any help will be greatly appreciated

View 1 Replies View Related

Is There A Compiler For MS SQL Procedures?

Mar 11, 2003

I know I get my hand slapped whenever I mention the "O" word here, but the TOAD compiler for "O" is outstanding.

To my limited knowledge, SQL Query Analyzer does not provide step through debugging and variable watches.

Is there a Microsoft or third party tool that provides this?

Thanks in advance.

View 4 Replies View Related

T-SQL....Compiler Directives???

Apr 28, 2007

Hi all
I want to know is there any COMPILER DIRECTIVE for using in TSQL
codes.?

Kind Regards.

View 3 Replies View Related

Compiler Error

Sep 13, 2007

Hi everyone,

The Reporting Services demons are after me again!
I'm trying to run a report in MRS that I've created and get the following when I debug or try to run the report:

Error 1 [rsUnexpectedCompilerError] An unexpected error occurred while compiling expressions. Native compiler return value: ‘[BC42206] Maximum number of warnings has been exceeded.’

I checked the "warnings" tab, and there are none doesn't it figure?

Any ideas would be welcome.

Needing a beer already,

>scott

View 6 Replies View Related

T-SQL...Compiler Directives....

Oct 19, 2007

Hi all
I want to know is there any way to use ompiler Directives in T-Sql Codes as the same as High level Programming Languages to enable or disable compilation of certain code at run-time?

Thanks in advance.
Kind Regards.

View 5 Replies View Related

Reporting Services Compiler Error

Sep 13, 2007

Hi All,

I'm trying to run a report in MRS that I've created and get the following when I debug or try to
run the report:

Error 1 [rsUnexpectedCompilerError] An unexpected error occurred while compiling expressions. Native compiler return value: €˜[BC42206] Maximum number of warnings has been exceeded.€™ I checked the "warnings" tab and there are none
doesn't it figure?

Any ideas would be welcome.

Already looking toward the weekend,

>scott

View 2 Replies View Related

Transact SQL :: Compiler Error Of Unable To Drop Table

May 29, 2015

I have a procedure where an id is passed into the procedure.  It will either be a numeric value or it will be the word "ALL."  All that is taking place is a select statement for the specified user id.  However, if All is passed in then I 1st need to get a list of all possible user id's and produce the results for all of the associated user ids.  This is my syntax, but it keeps producing a compile error of:

Msg 3701, Level 11, State 5, Line 1

Cannot drop the table '#tbl_temp', because it does not exist or you do not have permission.And I placed a comment above the line that is throwing this error.

CREATE procedure [dbo].[TEST]
(
@id varchar(100),
@startDate datetime,
@endDate datetime

[code]...

View 10 Replies View Related

Setup Initial Configuration Compiler Returned Error 0x80040154

Sep 25, 2007



Hi there,
I am having a problem following the installation of SQL Server 2005. When i try to run the SQL Server Configuration Manager, i get the following error message:

"Cannot connect to WMI provider. You do not have permission or the server is unreachable. Note that you can only manage SQL Server 2005 servers with SWL Server Configuration Manager. Class not registered [0x80040154]"

I looked at the thread "Unable to Uninstall SQL server 2005 Express" in which the same error number was mentioned and followed the advice, but still i get the same results. I have also tried
mofcomp "C:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof" in command prompt, but no luck. Im running windows xp professional SP2.

Ive spent 4 hours on this issue, and even tried uninstalling and installing again, but i am having no luck. Any help is deeply appreciated.

Thanks in advance.

Viran

View 6 Replies View Related

I Just Want One Entry For Each Call, With SLA Status 'Breach' If Any Of The Stages For The Call Were Out Of SLA.

Mar 19, 2008

Hi,

I am producing a php report using SQL queries to show the SLA status of our calls. Each call has response, fix & completion targets. If any of these targets are breached, the whole SLA status is set as 'Breach'.

The results table should look like the one below:





CallRef.

Description

Severity



ProblemRef

Logged
Date

Call
Status

SLA Status



C0001

Approval for PO€™s not received

2



DGE0014

05-01-06 14:48

Resolved

Breach


C0002

PO€™s not published

2



DGE0014

06-01-06 10:21

Resolved

OK


C0003

Approval for PO€™s not received from Siebel.

2



n/a

05-01-06 14:48

Investigating

OK



















Whereas I can pick the results for the first 6 columns from my Select query, the 'SLA Status' column requires the following calculation:

if (due_date < completed_date)
{ sla_status = 'OK';
}
else sla_status = 'Breach';

The Select statement in my query is looking like this...

Select Distinct CallRef, Description, Severity, ProblemRef, Logdate, Status, Due_date, Completed_date;

The problem is that my query is returning multiple entries for each stage of the call (see below), whereas I just want one entry for each call, with SLA status 'Breach' if any of the stages for the call were out of SLA.






CallRef.

Description

Severity



ProblemRef

Logged
Date

Call
Status

SLA Status



C0001

Approval for PO€™s not received

2



DGE0014

05-01-06 14:48

Resolved

Breach


C0001

Approval for PO€™s not received

2



DGE0014

05-01-06 14:48

Resolved

OK


C0001

Approval for PO€™s not received

2



DGE0014

05-01-06 14:48

Resolved

Breach



















Any help will be much much appreciated, this issue has been bothering me for some time now!!!




View 7 Replies View Related

Type TypePoint Is Marked For Native Serialization, But Field X Of Type TypePoint Is Not Valid For Native Serialization

Oct 6, 2006

I made a point type by C# for deploying in SQL2005.

It builds successfully every time.

When I deploy, it gives the following error:
"Error: Type "SqlServerProject1.TypePoint" is marked for native serialization, but field "x" of type "SqlServerProject1.TypePoint" is not valid for native serialization." although x variable is value type decimal.

using System;
using System.Data;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using Microsoft.SqlServer.Server;

[Serializable]
[SqlUserDefinedType(Format.Native, IsByteOrdered=true)]
public struct TypePoint : INullable
{
private bool m_Null;

private Decimal x;
private Decimal y;

public override string ToString()
{
// Replace the following code with your code

if (IsNull) // added part
{
return "null";
}
else
{
return x + ":" + y;
} // end of this part

// return "";
}

public bool IsNull
{
get
{
// Put your code here
return m_Null;
}
}

public static TypePoint Null
{
get
{
TypePoint h = new TypePoint();
h.m_Null = true;
return h;
}
}

public static TypePoint Parse(SqlString s) // Most Important Part
{
if (s.IsNull)
{
return Null;
}
else // added part
{
TypePoint p = new TypePoint();
string str = s.ToString();
string[] xy = str.Split(':');
p.x = Decimal.Parse(xy[0]);
p.y = Decimal.Parse(xy[1]);
return p;
}
}

public Decimal X
{
get
{
return x;
}
set
{
x = value;
}
}

public Decimal Y
{
get
{
return y;
}
set
{
y = value;
}
} // end of added part

// This is a place-holder method
public string Method1()
{
//Insert method code here
return "Hello";
}

// This is a place-holder static method
public static SqlString Method2()
{
//Insert method code here
return new SqlString("Hello");
}

// This is a place-holder field member
public int var1;
}

View 4 Replies View Related

WHILE..CONTINUE Problem

Aug 25, 2006

Hi all,
I need a bit of assistance with a piece of code I have written. I keep receiving a Syntax error "Incorrect syntax near END". The procedure is ~1000 line of code so I have just cut and paste the "problem" sql here and attached the full code to this message to see if anyone can help me out. Cheers :beer:


-- BEGIN CODE
IF @NoOfChildren > 0
BEGIN
DECLARE @childNo AS INTEGER
DECLARE @SQL AS VARCHAR(8000)
SET @childNo = 1

WHILE @childNo != @NoOfChildren
BEGIN
-- Perform Dynamic SQL check for children
SET @SQL = 'IF @strChild'+ @childNo + 'Surname IS NOT NULL
BEGIN
SET @asciicounter = 1
SET @asciifound = 0

WHILE @asciicounter != 255
BEGIN
IF CHARINDEX(char(@asciicounter),@strChild'+ @childNo +'Surname) != 0
BEGIN
IF @asciicounter NOT IN (32,45,46)
BEGIN
SET @asciifound = 1
END
END
SET @asciicounter = @asciicounter + 1
CONTINUE
END
IF @asciifound = 1
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''45'''',''
END
END'
EXECUTE @SQL

SET @SQL = ''

-- Perform Dynamic SQL check for Forename
SET @SQL = 'IF @strChild'+ @childNo + 'Forename IS NOT NULL
BEGIN
SET @asciicounter = 1
SET @asciifound = 0

WHILE @asciicounter != 255
BEGIN
IF CHARINDEX(char(@asciicounter),@strChild'+ @childNo +'Forename) != 0
BEGIN
IF @asciicounter NOT IN (32,45,46)
BEGIN
SET @asciifound = 1
END
END
SET @asciicounter = @asciicounter + 1
CONTINUE
END
IF @asciifound = 1
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''46'''',''
END
END'
EXECUTE @SQL

SET @SQL = ''

-- Perform Dynamic SQL check on DOB

SET @SQL = 'IF @dtChild'+@childNo+'Dob IS NULL
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''047'',''
END

IF ISDATE(@dtChild'+@childNo+'Dob) = 0
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''048'',''
END

IF DATEDIFF(YEAR, @dtChild'+@childNo+'Dob, GETDATE()) NOT BETWEEN 0 AND 18
BEGIN
IF DATEDIFF(YEAR, @dtChild'+@childNo+'Dob, GETDATE()) > 18
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''049'',''
END
ELSE
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''050'',''
END'
EXECUTE @SQL

SET @SQL = ''

-- Perform dynamic SQL check on Gender

SET @SQL = 'IF @blnChild'+@childNo+'Gender IS NULL
BEGIN
SET @strErrorBucket = @strErrorBucket + ''''051'',''
END'

EXECUTE @SQL

SET @childNo = @childNo + 1
CONTINUE
END

-- END CODE

View 8 Replies View Related

How To Continue On Error

Jul 23, 2005

How can I cause my insert statement to skip over (without failing) rowswhere there's a primary key constraint violation?I've got a case where daily I insert >500k rows of daily data, wherethe data is date and time stamped. So, for example, I have an insertstatement with constraint: WHERE date >= '5/20/05' AND date <'5/21/05'. That takes care of one day's data (5/20).However, the next day's data (5/21) will still have some time stampsfrom the previous day. Therefore the statement needs to be somethinglike WHERE date >= '5/20/05' AND date <= '5/21/05'. The 5/20 data isalready loaded but I need to take the 5/21 data which just happens tocontain just a few rows of data marked 5/20 and insert it withoutgenerating a primary key error from all the other 5/20 rows that arealready inserted.-Dave

View 7 Replies View Related

CONTINUE In A Cursor

Nov 29, 2007

Will using continue cause an infinite loop in a cursor or will the cursor know to go to the next record?


Begin Tran



exec @rtn = spDoSomething



select @err = @@error







If @err <> 0

Begin

rollback

continue

End

Commit Tran

View 1 Replies View Related

Continue Execution

Apr 15, 2008

In my package i have to loop through files and load the data from files into a table.
but if a file has error i need to move it to a folder like errored and continue execution with other files.

View 2 Replies View Related

Continue After Error

Aug 27, 2007

I have an SSIS package that uses a for each loop to send an order confirmation e-mail. If it does not find an email I need the package to continue after the failure path. The package stops after the failure, but I need it to continue with the next iteration of the for each loop. How can I do this?

View 4 Replies View Related

Compiler Is Not Recognizing My Using Statement For SglConnection Statement

Feb 4, 2006

I am using ASP.NET 2.0, and am attempting to write some code to connect to the database and query a data table. The compiler is not recognizing my SqlConnection statement. It does recognize other commands. And just to make sure, I created other sql objects such as ObjectDataSource and SqlDataSource. The compiler does not find a problem with that code.
Basically the compiler is telling me that I am missing a "using" directive. The compiler is wrong though, because I am including the statement "usingSystemData" Can someone please take a look at my code below and to see if you notice what the problem might be?  Note that I numbered the lines of code below. Note that I also tried putting lines 3 trhough 6 before line 2(The page directive) but that did not fix the problem The compiler still gives me the same compiler message.
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request.Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0246: The type or namespace name 'SqlConnection' could not be found (are you missing a using directive or an assembly reference?)Source Error:
Line 21: SqlConnection sqlConn = new SqlConnection("server=localhost;uid=sa;pwd=password;database=master;");
1 <asp:sqldatasource runat="server"></asp:sqldatasource>
2 <%@ Page Language="C#"%>
3 using System;
4 using System.Data;
5 using System.Collections;
6 using System.Data.SqlClient;
7
8 <script runat=server>
9
10 protected void Page_Load(object o, EventArgs e)
11 {
12 ObjectDataSource dsa; // This works no problems from the compiler here
13 SqlDataSource ds; // This works no problems from the compiler
14
15 if (IsPostBack)
16 {
17 if (AuthenticateUser(txtUsername.Text,txtPassword.Text))
18 {
19 instructions.Text = "Congratulations, your authenticated!";
20 instructions.ForeColor = System.Drawing.Color.Red;
21 SqlConnection sqlConn = new SqlConnection("server=localhost;uid=sa;pwd=password;database=master;");
22 String sqlStmt = "Select UserName from LogIn where UserName='" + txtUsername.Text + "' and password='" + sHashedPassword + "'";
23 }
24 else
25 {
26 instructions.Text = "Please try again!";
27 instructions.ForeColor = System.Drawing.Color.Red;
28 }
29 }
30
31 }
32
33 bool AuthenticateUser(string username, string password)
34 {
35 // Authentication code goes here
36
37 }

View 1 Replies View Related

Insufficient Memory To Continue

Nov 27, 2001

I am running a .sql file containing a large number of delete and insert statements, using isql from the command line. After 2 minutes I get a message "Insufficient memory to continue", same statements if I cut and paste in SQL server query analyzer I do not get this message. On looking at the
task manager, it shows a lot of available memory.

Any clues

Thanks in advance

View 1 Replies View Related

Continue On If Certain Error Message

Jan 14, 2002

I have a sql statement which runs through a reference table to drop columns no longer needed. It works, however if it tries to delete a column that does not exist, it errors out. Is there a way to continue if this error appears(I have the set error routine set up) The question is can I tell it if it is this error to go on, and is "continue" the
right syntax? Below is statement

open dbcursor
fetch next from dbcursor into @tbname,@fldname,@recid
while (@@FETCH_STATUS <> -1)
begin
--set @tbname = 'IMMUNIZATION_MAST_'
--set @fldname = 'cb_other'
set @sql = 'alter table ' + ltrim(@tbname)
set @sql3= ' drop column ' + ltrim(@fldname)
exec(@sql + @sql3)
select @error = @@error
if @error = 5924
begin
CONTINUE?
end
print @error

View 1 Replies View Related

Error In Replication How To Continue

Jan 28, 2004

I have transactional Replication from A to B.

My distribution agent failed becos of a primary key violation error in a table.[i have not included the skip error option].

Then the replication stopped.
The transactions on other tables are also not replicated to B.

IF an error is encountered in one of the tables will the replication stop entirely??.Is there no way for the replication to continue for the rest of the tables..
Pls clarify

View 2 Replies View Related

Continue Option In For Loop

Jun 1, 2007

I have a for loop I have several tasks inside. I would like to "continue" with a new iteration if any of the tasks in the loop error or fail. Is this possible and if so -- how?

View 5 Replies View Related

Continue On INSERT Error.

May 10, 2007

Hi!



Imagine this SQL statement:






Code SnippetINSERT INTO B SELECT * FROM A






If one of the insert fails ... don't continue, the statement fail. For example if any field in A violate a constraint in B, the statement fails.



I want that the statement continue if errors occurs, if i lost a number of rows don't matter ... but if i can save or log this row will be great too !!



Is posible? Any way to do it?



Regards.

View 5 Replies View Related

Unable To Load Bcp Resource DLL. BCP Cannot Continue

Nov 30, 2006

I get the message when loading the bcp. I check the path variable and the sqlserver BINN directory is there, but twice. If I try opening the command window and write bcp, I get the error, if I enter the whole path c:...80 oolinncp there is no problem. I wonder what could it be?

I've manually reinstalled many times but still having trouble.

Thanx in advance

SQL SERVER 2000 or SQL SERVER 7 (I've tried with both)
WINDOWS XP

View 2 Replies View Related

Continue The Query If An Error Occured

Jan 12, 2004

I have a looped query querying linked servers. When it cannot connect to a server, it errors out.

Error Message;
Server: Msg 6, Level 16, State 1, Line 2
Specified SQL server not found.

How can I handle this error message and continue the query?

View 6 Replies View Related

Insufficient Memory To Continue The Execution

Nov 24, 2007

I have scheduled a SSIS package to run repeatedly by creating a scheduled SQL job that runs every minute . After every hour the packgae fails with the following error

Description: System.OutOfMemoryException: Insufficient memory to continue the execution of the program. at Microsoft.SqlServer.Dts.Pipeline.Wrapper.IDTSCustomProperty90.get_Value() at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.CreateUserComponent() End Erro

The strange thing is that if i right click on SQL JOb and run it...it works fine.


Did anyone encounter similar problem or know the solution of the above problem ?

Thanks....

View 1 Replies View Related

Stop Growth In .mdf And Continue On .ndf File?

Jan 4, 2008



I have 50GB datafile (.mdf) and have 650 mb lift on the hard drive. I have another drive (on the same box) which has about 30 GB left.
My question is can i create a .ndf file in that 30GB drive and continue the database growth on the new .ndf file with out any furthur growth on the .mdf file? please help!

Thanks in advance!


THE LADDERS (The Most $100k+ Jobs.)
www.TheLadders.com

View 3 Replies View Related

How To Continue Package Execution During Error?

Jun 5, 2006

We have a package that loads the data from several excel files into database in a forloop.

Everything works files until the package hits the bad file.

My goal is to continue the loop to process the rest of the files by skipping the bad file and error. In each task OnError I am creating custom error message to send an error/ sucess summary email out at end of the process.

How can force the for loop to continue when there is an error?

Is there any way to reset the errors?

Thanks

R

View 1 Replies View Related

Log Errors, But Continue Processing Data

Jun 26, 2007

Do you have to set the Error Output on DF components to "Fail Component" in order to get the errors?



What I would LIKE to do is a combination of "Ignore Failure" and "Fail Component". You see, I am using the Logging feature in my package that creates the sysdtslog90 table in the SQL database. The errors that I am logging make sense and have enough information for my purposes.



The problem is that I would like to continue processing the data and not have it stop when a data error occurs. I REALLY do not want to Redirect Rows unless it is necessary for me to do what I am asking.



Using Ignore Failure on both the source text file and destination SQL table allows the "good" data to be inserted, but I cannot get any info on the columns in error. Conversely, if I choose to Fail component, I get the info on the columns in error, but only the data that was inserted before the error was encountered is inserted into the table.



Suggestions?

View 14 Replies View Related

FOREACH Loop Container: Continue ?

May 26, 2006

With a ForEach container, configured to loop through files in a
directory, if I have a problem with a file.. can I direct the loop to
skip on to the next file?



I'm processing structured files, first record of each is some
header info, body records are in the middle, and then the last record
is a trailer containg a checksum



So, for each file in the directory, I split the records into three raw
files, one for header rec(s) , one for body recs and one for trailer
recs. (based on line numbers and using a conditional split to direct
the records)



Then I start by processing the header recs in a dataflow.. if all goes
well there I move on to the next dataflow to process the body recs from
the DataRecs raw file.. etc...



I would like to do some validation at each processing step.. if a
header rec fails validation say... then I'd like to just stop
processing that file and move onto the next file...



Now, I don't see my validation throwing an exception... so its more
that I'd decide (maybe using an Audit ) that the header doesn't pass
validation.. then I'd like to put a record in an error table (with info
about filename, source etc, not just content of the current data row)



But not sure what approach to take on this...



If there is an appropriate section in BOL please point me at it...



Thanks

PJ

View 13 Replies View Related

Continue Transaction If Trigger Fails

Nov 6, 2007

Hi guys,

I have some triggers that insert data in a table located in a remote server. If the remote server happens to be down I want to continue with the original transaction anyway. Can I use a BENGIN TRY BEGIN CATCH block to continue with the transaction in the trigger and also insert the data into a temporal local table if the remote insert fails?

Regards

View 3 Replies View Related

Log Errors But Continue To Load Data?

May 4, 2006

Hello,

In my SSIS package I am trying to import a .csv flat file with about 170,000 rows of data with 75 columns (I know this is rather large). I would like to create a SSIS package that loads ALL of the rows of data into a table. This table has it's fields defined (such as money, float, varchar, datetime, etc). I want the data to load to this table even if there is a conversion error converting any field. When the data is loaded to this table, any fields that couldn't be converted should be set to null. Of the 75 columns of data, there are MANY columns that could be invalid.

For example, if the flat file contains the value "00/00/00" for my "PaidDate" field, I would want all of the other fields to be populated and the value for this particular record's "PaidDate" field to be null.

It would also be nice if I could trap any of the fields that caused a problem and log them along with the row.

I know that SSIS supports the "Redirect Row" method for handling data, but in my case, I don't want to redirect it. I want to continue to load it, just with a null value.

Is there an easy way of doing this (i.e. perhaps by using the Advanced Editor for the Flat File Source and setting something in the Input/Output columns)? I really don't want to create a Derived Column or Data Conversion transformation for every field that needs to be converted (b/c there are 75 columns to maintain this for).

I know if I import this file to an Access 2003 database, it imports the data fine and logs any conversion errors to an "_ConversionErrors" table. I am basically looking for this same behavior in SSIS, without having to maintain 75 columns.

TIA

View 3 Replies View Related

Continue ForEach After An Error Was Handled

Mar 13, 2008

How can we continue with the rest of the iterations in ForEach Loop after handle an error.

I Have a dataflow task inside a for-each loop and processing a set of flat files in that. When error occurs in the dataflow task, i moved that particular flat file to another location. But, If an error occurs at first falt file, It moves that flat file to the location i specified and not continue with the next file (The Execution finished at that stage itself afetr the first flat file).

I Set the FailParentonFailue of Dataflow task to TRUE (Since its inside the for loop).

Any thing i have to change ? Or Where i miss the thing.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved