Hi,
we have job that execute SSIS (s) using dtexec and save output(s) to file
Output of SSIS is 4 page long full of entries like
Validating: 0% ..ProgressProgress: .. Prepare for Execute: 100%
1. Can I limit output to show only success or failure ?
2. Can I redirect output of dtexec to be saved in msdb insted of showing after execution.
Thank you
Alex
Hi All !Is it possible to get rid of these dash symbols which are underliningthe column name when recordset is returned after query execution ?For example, using isql.exe:SELECT 'blah'goproduces the following results:----blahWhat I want to achieve is justblahI know that SET NOCOUNT ON switches the "X row affected" thing. Buthow about column headers ?Thanks for your time,Seeker
View 5 Replies View RelatedI have a very simple stored procedure that returns a list of employees. The procedure works fine. However, sometimes there is no records returned. In that case, I'd like to like the procedure to return a single record with predetermined values. I've added the YELLOW portion of the code to my existing proc to reflects the logic of what I am trying to accomplish.
CREATE PROC proc_Emp
@Sel_Country
AS
BEGIN
SELECT DISTINCT employee, hrid
FROM emp_table
WHERE country = @Sel_Country
@SEND_RESULTS =
CASE WHEN row_count = 0 THEN
SELECT 'No Country', 4444444444
ELSE
(send original results)
END
END
I need to:
Query for the employee list
If the row count is zero/null then return fixed values
Else return the orginal data from Step 1.
I'm guessing I need to use the OUTPUT command and configure some variables. But I'm not having much luck decoding BOL and I've not found any similar submissions to the forum.
Rob
Hi all,
I have a several stored procedures that they are designed to do Update and Insert tasks and all of them after finishing the task will return the Inserted or Updated row.
The problem is sometime I would need to call the stored procedure inside other ones and somehow i need to stop the inner stored procedures from producing resultsets. I don't find any SET options in SQL documentation which could control this behavior and block resultsets from being sent to the client.
Is there any way i could do this?
Exmaple:
In following example as a result of dbo.AddressInsert being called within dbo.CustomerInsert, two resultsets are returned to the client!
Procedure dbo.AddressInsert(....)
as
BEGIN
Insert INTO Adress ....
SELECT * FROM AdressView WHERE AddressID = @@identity
END
Procedure dbo.CustomerInsert(...)
as
begin
-- transcation begin...
EXEC dbo.AddressInsert
INSERT INTO Customer....
-- end transcation
SELECT * FROM Customer WHERE CustomerID = @@identity
end
I have been testing our SQL Mail setup in SQL Server 2000 (sp3a) andhave found that when I attach results as a file, every other characteris a control character which causes each real character output on aseparate line. I have no idea why this is happenening, I've never seenit before.The code looks like this;EXEC master.dbo.xp_sendmail@recipients = '<email address>',@dbuse = 'TestDB',@query = 'select top 50 descr from AdTable',@message = 'nathan email test',@subject='SQL Mail test',@attach_results = 'true',@width = 100,@separator = ','The results look like this! -descr-----etc.When I view the result text file with an advanced text editor I cansee that every other character is a control - these characters are notin the data, I have already checked this, so it looks like its theyare being created by SQL Server or the mail system? Any advice muchappreciated.Nathan
View 6 Replies View RelatedI'm trying to take the output of the Render method and bind it to the ReportViewer control. First of all, is this possible? If so, what is the best way to render the report (format: XML,CSV, NULL, etc), and then how to I 'bind' the result to the control?
I'm proving some code to demonstrate how I'm rendering the report:
...
string format = "XML";
string devInfo = @"<DeviceInfo><Toolbar>False</Toolbar></DeviceInfo>";
ReportExecutionService rs = new ReportExecutionService();
ExecutionInfo execInfo = new ExecutionInfo();
ExecutionHeader execHeader = new ExecutionHeader();
byte[] result= null;
rs.ExecutionHeaderValue = execHeader;
execInfo = rs.LoadReport(path, null);
string SessionId = rs.ExecutionHeaderValue.ExecutionID;
result = rs.Render(format, devInfo, out extension, out encoding, out mimeType, out warnings, out streamIDs);
Thanks, any help would be greatly appreciated.
Peter
We are experiencing a problem where a server report is rendered in the
ReportViewer control successfully but when the user chooses to print the
content, the print output is incomplete (ex. only 18 of 23 pages are printed,
etc.).
This is happening consistently and has been reproduced for multiple
different reports. It does not happen if the same report is printed via the
Report Manager web interface.
I have also found that if I switch to Print Layout mode and then initiate
the print from the ReportViewer that the problem does not occur. This is our
current workaround, but it would be nice to know what is causing this and
have it fixed.
Has anybody else seen this? Is this a known issue with my current version
(SQLRS 2005 with SP1 applied).
Thanx in advance.
Hi all,
I have a serious problem with my SSIS Package while executing using 32-bit DTExec and 64-bit DTExec.
Here are the details:
Environment:
Windows Server 2003 64-bit (Build 3790: Service Pack 2)
SSIS 32-bit & 64-bit installed
SQL Server 2005 (Microsoft SQL Server 2005 - 9.00.1399.06 (X64) - RTM)
SSIS Package details (compiled in 64 bit)
Script tasks only
Microsoft Visual Basic .NET (using TRY...CATCH block)
PreCompileScriptIntoBinaryCode = TRUE
Run64BitRunTime = TRUE
Execution
Batch file that uses DTExec to execute the Package.
SCENARIO
I am trying to exeucte the above SSIS package using both 32-bit and 64-bit DTExec to make it failure by providing invalid connection string. Here are the details,
Wrong connection String using 32-bit Execution
While establishing the connection the error message has been nicely captured in to my Exception block and writes into the log file.
Wrong connection String using 64-bit Execution
While establishing the connection the error has not been catpured anywhere (although I have TRY CATCH block) and it haults there itself with the message "Process is terminated due to StackOverflowException". Later I found that the error is due to the connection string along with the unhandled exception.
Please suggest any one of the following my findings, also if you have any other advice would be very much appreciated.
1. Shall I go ahead and fix the issue by handling those unhandled errors? (e.g Appdomain, application). I tried several but still not working using 64-bit DTExec.
2. Shall I go ahead and use 32-bit DTExec to execute the package? If so, is there any other major issue...like performance or anyother bug?
P.S: We cannot apply any service pack for SQL Server 2005 at the moment. Sorry abt it. If you have any specific hotfix for DTExec (without affecting SQL Server) then we can decide.
Sorry for the lengthy one and Thanks very much for you help in advance .
Thanks again!
Suresh
Hi All,
I am placing a Matrix inside the table control for grouping requirements,but when we export the report to the Excel, the contents inside the table cell are ignored. Is there any way to get the full report exported, as per the Requirement.Please help me with this issue.
With Thanks
M.Mahendra
does any one have and example of how to embedd a flash swf file onto a report.??? Is it possable? any examples would be helpful.
View 1 Replies View RelatedUPDATE #2: When it said "Do you want to install Microsoft SQL Server" I said "yes" and that caused it to work. I exited and re-ran and now the print runs w/o the "install SQL Server" (If the prompt had said "Do you want to install the print dialog" we wouldn't be having this discussion...)
UPDATE: After posting this i discovered that the same thing occurs when attempting to print the report direct from IE6: First a dialog pops up "Do you want to install this software?" Name: Microsoft SQL Server. When I click "Don't Install" I get the dialog "unable to load client print control." Since this happens direct from IE6 I suspect it's browser settings. I'll resume tomorrow and post a followup.
My WinForm C# app integrates Reporting Services by calling them from WebBrowser controls. The problem is attempts to print cause a dialog: "unable to load client print control."
I've read prior posts that say "enable Active-X in your browser" - I don't know how to do that from a WebBrowser control.
Any ideas how to support Reporting Services "Print" from within a WebBrowser control?
RELATED THREADS
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=332145&SiteID=1
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=264478&SiteID=1
While using Aggregate Transformation to group one column,the rows of output sometimes larger than the rows returned by a T-SQL statement via SSMS.
For example,the output of the Aggregate Transformation may be 960216 ,but the
'Select Count(Orderid) From ... Group By ***' T-SQL Statement returns 96018*.
I'm sure the Group By of the Aggregate Transformation is right!
But ,when I set the "keyscale" property of the transformation,the results match!
In my opinion,the "keyscale" property will jsut affects the performance of the transformaiton,but not the result of the transformation.
Thanks for your advice.
Inside some TSQL programmable object (a SP/or a query in Management Studio)I have a parameter containing the name of a StoreProcedure+The required Argument for these SP. (for example it's between the brackets [])
EX1 :Â @SPToCall : [sp_ChooseTypeOfResult 'Water type']
EX2 :Â @SPToCall : [sp_ChooseTypeOfXMLResult 'TABLE type', 'NODE XML']
EX3 :Â @SPToCall : [sp_GetSomeResult]
I can't change thoses SP, (and i don't have a nice output param to cach, as i would need to change the SP Definition)All these SP 'return' a 'select' of 1 record the same datatype ie: NVARCHAR. Unfortunately there is no output param (it would have been so easy otherwise. So I am working on something like this but I 'can't find anything working
DECLARE @myFinalVarFilledWithCachedOutputÂ
NVARCHAR(MAX);
DECLARE @SPToCall NVARCHAR(MAX) = N'sp_ChooseTypeOfXMLResult
''TABLE type'', ''NODE XML'';'
DECLARE @paramsDefintion = N'@CatchedOutput NVARCHAR(MAX) OUTPUT'
[code]...
Hi
I have Lookup task to determine if source data should be updated to or insert to the customer table. After Lookup task, the Error Output pipeline will redirect to insert new data to the table and the Output pipeline will update customer table. But these two tasks will be processing at the same time which causes stall on the process. Never end.....
The job is similiart to what Slow Changing Dimention does but it won't update the table at the same time.
What can I do to avoid such situation?
Thanks in advance,
JD
I am working on an OLAP modeled database.
I have a Lookup Transformation that matches the natural key of a dimension member and returns the dimension key for that member (surrogate key pipeline stuff).
I am using an OLE DB Command as the Error flow of the Lookup Transformation to insert an "Inferred Member" (new row) into a dimension table if the Lookup fails.
The OLE DB Command calls a stored procedure (dbo.InsertNewDimensionMember) that inserts the new member and returns the key of the new member (using scope_identity) as an output.
What is the syntax in the SQL Command line of the OLE DB Command Transformation to set the output of the stored procedure as an Output Column?
I know that I can 1) add a second Lookup with "Enable memory restriction" on (no caching) in the Success data flow after the OLE DB Command, 2) find the newly inserted member, and 3) Union both Lookup results together, but this is a large dimension table (several million rows) and searching for the newly inserted dimension member seems excessive, especially since I have the ID I want returned as output from the stored procedure that inserted it.
Thanks in advance for any assistance you can provide.
Hello,
I have a command line as following, with DTEXEC to launch the execution of a package and to set a value (13335) of an user variable called CIB (string type):
dtexec /f c: empPackageInsert.dtsx
/set PackageDataFlowTask.Variables[Utilisateur::CIB].Properties[Value];13335
But I have got an error message saying that the object is not known in the package. My variable does exist in the variable window of the dataflow part.
Thank you for telling me what to set so that the variable can be set by the command line.
Regards,
Marie-Thérèse
i am using dtexec in command prompt
it always prompt the path is not valid and error is 0x80070057
below is what i input
dtexec /dts c:ssis******.dtsx
what's wrong? thanks
I understand to schedule an SSIS package to run, I need to use the dtexec utility. I want to schedule the job right within SQL. I walked through how to set up the job, but I really could not decipher the proper syntax to use as a Step.
I have the following:
dtexec /File "C:...file.dtsx"
Is the the proper way to schedule and execute an SSIS package or is there some other way I should be doing this. The pacakge will run unattended nightly. I am using SQL Server 2005.
Thanks for the information
Hi!Server info -Win2K3 Server +SP1 with 1 GB Memory and 1.5 GB Virtual MemorySQL Server 2000 Enterprise Edition + SP3 running on this.Required result -Create a SQL Script that will contain a set of create, update, insert& delete statements (about 17500 lines including blank lines) thatcan be run on different databases seperatelyHow we do this -We have a SP - that creates a temporary table and then calls anotherSP that actually populates the temporary table created by the first SP*Samples of both SPs are below -PROBLEMThe result is directed to a file -However when the query is run it runs through the entire script but'Jumbles' the outputRunning the same scripts on a copy of the database on other machineswork fine and the size of the outfiles is exactly the sameI have increased the page size to 2.5 GB and restarted the server.Running the sp now generated the correct output a few times but gotjumbled as before after a few more users logged in and activity on theserver increased.Another interesting point is that the output is jumbled exactly thesame way each time. It seems the sql executes correctly and writesthe output in chunks only writting the chunks out of sequence - butin the same sequence each time.e.g. of expected resultInsert into Table1Values x, y, z, 1, 2Insert into Table1Values q, s, g, 3, 4Insert into Table1Values c, d, e, 21, 12....Insert into Table2Values ...Insert into Table3Values ................Update RefGenSet Last = 1234Where RefGenRef = 1JUMBLED OUTPUTInsert into Table1Values x, y, z, 1, 2Insert into Table1Values q, s, g, 3, 4Insert into Table1Values c, d, e, 21, 12....Insert into Table2Values ...Insert into Table2Values ...Values ...Update RefGenSet Last = 1234Where RefGenRef = 1Insert into Table3Values ................Insert into Table1Values c, d, e, 21, 12....Insert into Table2----------------------------------------Sample of First Script - STATDATA_RSLT**************************************SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOSET NOCOUNT ONGOCREATE PROCEDURE StatData_rsltASCREATE TABLE #tbl_Script(ScriptText varchar(4000))EXEC TestStatData_intSELECT t.ScriptTextFROM #tbl_Script tGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO*******************************************Sample of CALLED SP - TestStatData_int*******************************************SET QUOTED_IDENTIFIER ONGOSET ANSI_NULLS ONGOCREATE PROCEDURE TestStatData_intASDECLARE @AttrRef int,@TestID int,@PrtTestRef int,@AttrType tinyint,@EdtblSw tinyint,@NmValRef int,@SrtTypeRef int,@AttrStr varchar(20),@TestStr varchar(20),@PrtTestStr varchar(20),@AttrTypeStr varchar(20),@EdtblStr varchar(20),@NmValStr varchar(20),@SrtTypeStr varchar(20),@TestRef int,@Seq int,@PrtRef int,@Value varchar(255),@TermDate datetime,@AttrID int,@DefSw tinyint,@WantSw tinyint,@TestRefStr varchar(20),@SeqStr varchar(20),@PrtStr varchar(20),@TermDateStr varchar(255),@AttrIDStr varchar(20),@DefStr varchar(20),@WantStr varchar(20),@LanRef int,@LanStr varchar(20),@Code varchar(20),@Desc varchar(255),@MultiCode varchar(20),@MultiDesc varchar(255),@InhSw tinyint,@InhStr varchar(20),@InhFrom int,@InhFromStr varchar(20),@Lan_TestRef int,@ActSw tinyint,@ActSwStr varchar(20)SELECT @Lan_TestRef = dbo.fn_GetTestRef('Lan')INSERT INTO #tbl_ScriptVALUES('')-- Create tablesINSERT INTO #tbl_ScriptVALUES ('CREATE TABLE #tbl_Test (AttrRef int, TestID int , PrtTestRefint, AttrType tinyint, EdtblSw tinyint, NmValRef int, SrtTypeRefint)')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES('CREATE TABLE #tbl_TestAttr(AttrRef int, TestRef int, Seq int,PrtRef int, AttrType tinyint, Value varchar(255), TermDate datetime,AttrID int, DefSw tinyint, WantSw tinyint, ActSw tinyint)')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('CREATE TABLE #tbl_AttrName(AttrRef int, LanRef int, Codevarchar(20), [Desc] varchar(255), MultiCode varchar(20), MultiDescvarchar(255), InhSw tinyint, InhFrom int)')INSERT INTO #tbl_ScriptVALUES ('')-- insert Test valuesDECLARE Test_cursor CURSOR FORSELECT l.AttrRef, l.TestID, l.PrtTestRef, l.AttrType, l.EdtblSw,l.NmValRef, l.SrtTypeRefFROM Test lOPEN Test_cursorFETCH NEXT FROM Test_cursorINTO @AttrRef, @TestID, @PrtTestRef, @AttrType, @EdtblSw, @NmValRef,@SrtTypeRefWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@TestStr = ISNULL(CAST(@TestID as varchar), 'NULL'),@PrtTestStr = ISNULL(CAST(@PrtTestRef as varchar), 'NULL'),@AttrTypeStr = ISNULL(CAST(@AttrType as varchar), 'NULL'),@EdtblStr = ISNULL(CAST(@EdtblSw as varchar), 'NULL'),@NmValStr = ISNULL(CAST(@NmValRef as varchar), 'NULL'),@SrtTypeStr = ISNULL(CAST(@SrtTypeRef as varchar), 'NULL')INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_Test(AttrRef, TestID, PrtTestRef,AttrType,EdtblSw, NmValRef, SrtTypeRef)')INSERT INTO #tbl_ScriptVALUES ('VALUES ( ' + @AttrStr + ', ' + @TestStr + ', ' +@PrtTestStr+ ', ' + @AttrTypeStr + ', ' + @EdtblStr + ', ' + @NmValStr + ', ' +@SrtTypeStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM Test_cursorINTO @AttrRef, @TestID, @PrtTestRef, @AttrType, @EdtblSw, @NmValRef,@SrtTypeRefENDCLOSE Test_cursorDEALLOCATE Test_cursorDECLARE TestAttr_cursor CURSOR FORSELECT le.AttrRef, le.TestRef, le.Seq, le.PrtRef, le.AttrType,le.Value,le.TermDate, le.AttrID, le.DefSw, le.WantSw, le.ActSwFROM TestAttr leWHERE le.WantSw = 1AND le.ActSw = 1OPEN TestAttr_cursorFETCH NEXT FROM TestAttr_cursorINTO @AttrRef, @TestRef, @Seq, @PrtRef, @AttrType, @Value,@TermDate, @AttrID, @DefSw, @WantSw, @ActSwWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@TestRefStr = ISNULL(CAST(@TestRef as varchar), 'NULL'),@SeqStr = ISNULL(CAST(@Seq as varchar), 'NULL'),@PrtStr = ISNULL(CAST(@PrtRef as varchar), 'NULL'),@AttrTypeStr = ISNULL(CAST(@AttrType as varchar), 'NULL'),@Value = ISNULL(@Value, 'NULL'),@TermDateStr = ISNULL(CAST(@TermDate as varchar), 'NULL'),@AttrIDStr = ISNULL(CAST(@AttrID as varchar), 'NULL'),@DefStr = ISNULL(CAST(@DefSw as varchar), 'NULL'),@WantStr = ISNULL(CAST(@WantSw as varchar), 'NULL'),@ActSwStr = ISNULL(CAST(@ActSw as varchar), '1')SELECT @Value = '''' + @Value + ''''WHERE @Value <> 'NULL'INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_TestAttr(AttrRef, TestRef, Seq, PrtRef,AttrType, Value, TermDate, AttrID, DefSw, WantSw, ActSw)')INSERT INTO #tbl_ScriptVALUES ('VALUES (' + @AttrStr + ', ' + @TestRefStr + ', ' +@SeqStr+ ', ' + @PrtStr + ', ' + @AttrTypeStr + ', ' + @Value + ', ' +@TermDateStr + ', ' + @AttrIDStr + ', ' + @DefStr + ', ' + @WantStr+', '+ @ActSwStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM TestAttr_cursorINTO @AttrRef, @TestRef, @Seq, @PrtRef, @AttrType, @Value,@TermDate, @AttrID, @DefSw, @WantSw, @ActSwENDCLOSE TestAttr_cursorDEALLOCATE TestAttr_cursorDECLARE AttrName_cursor CURSOR FORSELECT e.AttrRef, e.LanRef, e.Code, e.[Desc], e.MultiCode,e.MultiDesc, e.InhSw, e.InhFromFROM AttrName e, TestAttr leWHERE e.LanRef = 0AND e.AttrRef = le.AttrRefAND le.WantSw = 1AND le.ActSw = 1OPEN AttrName_cursorFETCH NEXT FROM AttrName_cursorINTO @AttrRef, @LanRef, @Code, @Desc, @MultiCode,@MultiDesc, @InhSw, @InhFromWHILE @@FETCH_STATUS = 0BEGINSELECT @AttrStr = ISNULL(CAST(@AttrRef as varchar), 'NULL'),@LanStr = ISNULL(CAST(@LanRef as varchar), 'NULL'),@Code = ISNULL(@Code, 'NULL'),@Desc = ISNULL(@Desc, 'NULL'),@MultiCode = ISNULL(@MultiCode, 'NULL'),@MultiDesc = ISNULL(@MultiDesc, 'NULL'),@InhStr = ISNULL(CAST(@InhSw as varchar), 'NULL'),@InhFromStr = ISNULL(CAST(@InhFrom as varchar), 'NULL')SELECT @Code = REPLACE(@Code, '''',''''''),@Desc = REPLACE(@Desc, '''','''''') ,@MultiCode = REPLACE(@MultiCode, '''','''''') ,@MultiDesc = REPLACE(@MultiDesc, '''','''''')INSERT INTO #tbl_ScriptVALUES ('INSERT INTO #tbl_AttrName(AttrRef, LanRef, Code, [Desc],MultiCode, MultiDesc, InhSw, InhFrom)')INSERT INTO #tbl_ScriptVALUES ('VALUES (' + @AttrStr + ', ' + @LanStr + ', ''' + @Code +''', ''' + @Desc + ''', ''' + @MultiCode + ''', ''' + @MultiDesc +''',' + @InhStr + ', ' + @InhFromStr + ')')INSERT INTO #tbl_ScriptVALUES ('')FETCH NEXT FROM AttrName_cursorINTO @AttrRef, @LanRef, @Code, @Desc, @MultiCode,@MultiDesc, @InhSw, @InhFromENDCLOSE AttrName_cursorDEALLOCATE AttrName_cursor-- Do update TestAttr dataINSERT INTO #tbl_ScriptVALUES ('UPDATE le')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' le.TestRef = t.TestRef,')INSERT INTO #tbl_ScriptVALUES (' le.PrtRef = t.PrtRef,')INSERT INTO #tbl_ScriptVALUES (' le.AttrType = t.AttrType,')INSERT INTO #tbl_ScriptVALUES (' le.Value = t.Value,')INSERT INTO #tbl_ScriptVALUES (' le.TermDate = t.TermDate,')INSERT INTO #tbl_ScriptVALUES (' le.AttrID = t.AttrID,')INSERT INTO #tbl_ScriptVALUES (' le.DefSw = t.DefSw,')INSERT INTO #tbl_ScriptVALUES (' le.WantSw = t.WantSw,')INSERT INTO #tbl_ScriptVALUES (' le.ActSw = t.ActSw')INSERT INTO #tbl_ScriptVALUES ('FROM TestAttr le, #tbl_TestAttr t')INSERT INTO #tbl_ScriptVALUES ('WHERE le.AttrRef = t.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')-- Update AttrNameINSERT INTO #tbl_ScriptVALUES ('UPDATE en')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' en.Code = te.Code,')INSERT INTO #tbl_ScriptVALUES (' en.[Desc] = te.[Desc],')INSERT INTO #tbl_ScriptVALUES (' en.MultiCode = te.MultiCode,')INSERT INTO #tbl_ScriptVALUES (' en.MultiDesc = te.MultiDesc,')INSERT INTO #tbl_ScriptVALUES (' en.InhSw = te.InhSw,')INSERT INTO #tbl_ScriptVALUES (' en.InhFrom = te.InhFrom')INSERT INTO #tbl_ScriptVALUES ('FROM AttrName en, #tbl_AttrName te')INSERT INTO #tbl_ScriptVALUES ('WHERE en.AttrRef = te.AttrRef')INSERT INTO #tbl_ScriptVALUES (' AND en.LanRef = te.LanRef')INSERT INTO #tbl_ScriptVALUES (' AND te.LanRef = 0')-- Do update Test the dataINSERT INTO #tbl_ScriptVALUES ('UPDATE l')INSERT INTO #tbl_ScriptVALUES ('SET')INSERT INTO #tbl_ScriptVALUES (' l.TestID = t.TestID,')INSERT INTO #tbl_ScriptVALUES (' l.PrtTestRef = t.PrtTestRef,')INSERT INTO #tbl_ScriptVALUES (' l.AttrType = t.AttrType,')INSERT INTO #tbl_ScriptVALUES (' l.EdtblSw = t.EdtblSw,')INSERT INTO #tbl_ScriptVALUES (' l.NmValRef = t.NmValRef')INSERT INTO #tbl_ScriptVALUES ('FROM Test l, #tbl_Test t')INSERT INTO #tbl_ScriptVALUES ('WHERE l.AttrRef = t.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')--DELETE where just updatedINSERT INTO #tbl_ScriptVALUES ('DELETE FROM t')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_Test t, Test l')INSERT INTO #tbl_ScriptVALUES ('WHERE t.AttrRef = l.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DELETE FROM t')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_TestAttr t, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE t.AttrRef = le.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DELETE FROM te')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_AttrName te, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE te.AttrRef = le.AttrRef')INSERT INTO #tbl_ScriptVALUES ('')-- Insert TestAttrINSERT INTO #tbl_ScriptVALUES ('INSERT INTO TestAttr (AttrRef, TestRef, Seq, PrtRef,AttrType,Value, TermDate, AttrID, DefSw, WantSw, ActSw)')INSERT INTO #tbl_ScriptVALUES ('SELECT t.AttrRef, t.TestRef, t.Seq, t.PrtRef, t.AttrType,t.Value, t.TermDate, t.AttrID, t.DefSw, t.WantSw, t.ActSw')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_TestAttr t')INSERT INTO #tbl_ScriptVALUES ('')-- AttrNameINSERT INTO #tbl_ScriptVALUES ('INSERT INTO AttrName(AttrRef, LanRef, Code, [Desc],MultiCode,MultiDesc, InhSw, InhFrom)')INSERT INTO #tbl_ScriptVALUES ('SELECT te.AttrRef, le.AttrRef, te.Code, te.[Desc],te.MultiCode, te.MultiDesc, ')INSERT INTO #tbl_ScriptVALUES (' CASE le.AttrRef ')INSERT INTO #tbl_ScriptVALUES (' WHEN 0 THEN 0')INSERT INTO #tbl_ScriptVALUES (' ELSE 1 END,')INSERT INTO #tbl_ScriptVALUES (' CASE le.AttrRef ')INSERT INTO #tbl_ScriptVALUES (' WHEN 0 THEN NULL')INSERT INTO #tbl_ScriptVALUES (' ELSE 0 END')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_AttrName te, TestAttr le')INSERT INTO #tbl_ScriptVALUES ('WHERE le.TestRef = ' + CAST(@Lan_TestRef as varchar))INSERT INTO #tbl_ScriptVALUES ('')-- Insert new rowsINSERT INTO #tbl_ScriptVALUES ('INSERT INTO Test(AttrRef, TestID, PrtTestRef, AttrType,EdtblSw, NmValRef, SrtTypeRef)')INSERT INTO #tbl_ScriptVALUES ('SELECT t.AttrRef, t.TestID, t.PrtTestRef, t.AttrType,t.EdtblSw, t.NmValRef, t.SrtTypeRef')INSERT INTO #tbl_ScriptVALUES ('FROM #tbl_Test t')INSERT INTO #tbl_ScriptVALUES ('')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_Test')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_TestAttr')INSERT INTO #tbl_ScriptVALUES ('DROP TABLE #tbl_AttrName')-- Update RefGenDECLARE @RefGenReflast int,@RefGenRefStr varchar(10)SELECT @RefGenReflast = lastFROM RefGenWHERE RefGenRef = 1SELECT @RefGenRefStr = ISNULL(CAST(@RefGenReflast as varchar), 'NULL')INSERT INTO #tbl_ScriptVALUES('')INSERT INTO #tbl_ScriptVALUES('UPDATE RefGen')INSERT INTO #tbl_ScriptVALUES ('SET Last = ' + @RefGenRefStr)INSERT INTO #tbl_ScriptVALUES ('WHERE RefGenRef = 1')INSERT INTO #tbl_ScriptVALUES ('')GOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGO*******************************RegardsGlenn
View 5 Replies View RelatedFolks:
I have lots of Stored procedures in which we use 'dtsrun' to run DTS Packages. Now, after I upgrade the server to SQL 2005 will I have to change all the Stored procedure's to reflect 'dtexec' instead of 'dtsrun'?
Thanks !
Hi
I have a SSIS package which pulls files from a network share and loads data into SQLServer Database. When I execute the application using DTExecUI , It runs fine without any issues , but where as when I run it using the command line arguments, It seems to go in sleep mode and nothing happens. I need to kill the package from Task manager.
Following is the command I use to run my application
Dtexec /FILE "N:TempLoadFirewallData.dtsx" /CONFIGFILE "N:TempLoadFirewallData.dtsConfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EWCDI /SET "Package.Variables[User::RunID]";41
Regards
Meghana
This was directly from BOL.
/Conf[igFile] filespec
(Optional). Specifies a configuration file to extract values from. Using this option, you can set a run-time configuration that differs from the configuration that was specified at design time for the package. You can store different configuration settings in an XML configuration file and then load the settings before package execution by using the /ConfigFile option.
Does this mean that I can specify which configuration file to use during runtime?
Or is just because I'm too desperate for that, I understood that way
Thanks
Hi,
The DTEXEC Utility has the capability of returning ReturnCodes which have specific meanings e.g.
ReturnCode=3 means: The package was canceled by the user.
Is it possible to set my own ReturnCode values?
For example, my Package contains a Script Task which contains code to search a folder for a file. If the file cannot be found then I make the Script Task fail and hence the Package fails. But, when the Package is invoked by the DTEXEC utility, then the ReturnCode is always set to 1. Is it posssible to set the ReturnCode from within the Package (in, say, a Script Task in the Event Handler) to a different value?
It is necessary to be able to set custom application-specific return codes because these return codes are passed to the Batch Scheduler which alerts Operations (Support) staff in the event of failure. Meaningful (custom) ReturnCodes expedite problem solving and are (usually) mandatory in large production environments.
If it is not possible to make a Package return my own returncodes via DTEXEC then can you suggest alternative solutions, please?
Thanks.
Hi!
When i excute in the sql server this works fine
xp_cmdshell 'dtexec /f "D:SSISProjectIntegration Services Project1ArchiveTicket.dtsx "'
but when i excute throught the C# code
jobCommand = new SqlCommand(@"xp_cmdshell 'dtexec /f "D:SSISProjectIntegration Services Project1ArchiveTicket.dtsx"'", cconn);
It shows up red lines near the " and ' qoutes. I know that quotation marks are wrong but don't know how to solve it.
some help please
Thanks
jas
Hi All,
I'm trying to execute DTExec from a workstation and I got some help from a different group without luck maybe someone here can help me.
This is what I try so far.
1. My package run in command line from my sql box using dtexec with
parameters.
2. Set the package with DontSaveSensitive and import into IS under MSDB with
the same option setup.
3. Set package role to public.
4. Share DTS folder with everyone permission just for testing.
5. Execute the package from a workstation using
//sqlServerbox/DTS/BINN/dtexec /dts "msdb/mypackage" /SER "MySQLServer" /set
package.variables[myvariable].Value;"myvalue1,myvalue2"
(myvariable is string and I can pass multiple values separate by commas)
6. Still getting error:
Error: 2007-02-09 10:31:34.31
Code: 0xC0010018
Source: Execute DTS 2000 Package Task
Description: Error loading a task. The contact information for the task
is "E
xecute DTS 2000 Package Task;Microsoft Corporation; Microsoft SQL Server v9;
? 2
004 Microsoft Corporation; All Rights
Reserved;http://www.microsoft.com/sql/supp
ort/default.asp;1". This happens when loading a task fails.
End Error
Anyone has any ideas?
Any help will be appreciate it. Tks in advance...
Rgds
Johnny
I can't crack this problem and my Google-Fu is failing me. I am using DTEXEC from a stored procedure to set a global variable in an SSIS package and execute the SSIS package, but I am getting an error. I will include the SQL code and the error that I am getting:
Code:
exec xp_cmdshell 'dtexec /SQL "Maintenance PlansSynchronizeWithProduction" /SERVER servernameinstance /USER user /PASSWORD password /SET Package.Variables[User:electMail].Properties[Value];1'
Error:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
NULL
Started: 3:17:02 PM
Warning: 2008-03-13 15:17:02.76
Code: 0x80012017
Source: ProductionToDevelopment
Description: The package path referenced an object that cannot be found: "Package.Variables[User:electMail].Properties[Value]". This occurs when an attempt is made to resolve a package path to an object that cannot be found.
End Warning
DTExec: Could not set Package.Variables[User:electMail].Properties[Value] value to 1.
Started: 3:17:02 PM
Finished: 3:17:02 PM
Elapsed: 0.375 seconds
NULL
All the examples I find over DTEXEC seem to follow what I am doing in the code and making variables in an SSIS package isn't rocket science, so I don't understand where I am going wrong.
I have seen people suggest indirect configuration as a solution, but when I set it up (using the environmental variable TEMP from the dropdown) it doesn't seem to help anything. I have used the exact path from the configuration wizard, though, so I'm pretty sure I have the path right.
Can anybody spare a clue?
HI, with a dataflow that has delay validation property = true, DTExec will not try to validate it when I call it with /validate option. Is there a way to see if the dataflow validate even though the delay validation property is set to true?
Thanks,
It was quite strange with dtexec....
The problem started with my package being scheduled under the SQL Agent.
I have two packages... one with simple SQL tasks and another with complex loop,sql tasks and activex scripts. Both using the XML configuration files for those DB Connection strings, user names and passwords.
First I tried to schedule the two packages under Sql agent using SSIS steps.
Both failed and I found out that I should set the ProtectionLevel to non-default.
So I set the protection level to 'DontSaveSensitive' and it works fine with the first package but the second package failed. After I tried many way (changing configuration files, setting and reinstalling the packages inside SQL DB etc..) I found a blog that I should try with CmdExe step in Sql agent scheduler rather than SSIS step. So I tried but still failing. the message said dtexec could not find the configuration xml file. Even I tried in the command prompt with the same command, it couldn't find the configuration. If I went into the directory where the configuration files are stored and run the command, it run fine. Seem like dtexec could not read the configuration from other directory. but still the sqlagent is failing...
Somebody have a clue?
rgds,
KyawAM
In my previous post here: https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1044739&SiteID=1 Michael Entin provides a number of responses to my questions regarding programatic execution of remote SSIS packages.
Having experienced some significant reliability problems with the Microsoft.SqlServer.Dts.Runtime components from an ASP.NET process (the page either times out, or inevitably just stops responding), I have been prototyping the DTExec command option which Michael suggests as being a better approach to remote programability.
So, off I've been prototyping this all day today...
I have a stored procedure that wraps a call to xp_cmdshell which takes the DTS (DTEXEC) params as a big long argument. This scenario would hopefully allow me to call the sproc from an ASP.NET application.
The proc is deployed to a SQL 2005 machine running SSIS (which I now understand is a REQUIREMENT for targetting SSIS "remotely"). The package targets a seperate SQL 2000 machine and includes two connection managers which are set to use SSPI. I use configuration option files to allow for configurable connection manager target/sources.
In this scenario, it does not seem that the DTEXEC command runs in the same context as the caller. and as a result, a peculiar account called MACHINENAME$ is used (where MachineName is literally the name of the SQL 2005 machine). The account authentication fails (obviously) when the package tries to establish a connection to any of the connection managers because MACHINENAME$ does not exist on the connection manager servers.
Based on the following excerpt from the MSDN doc on xp_cmdshell, it would seem that MACHINENAME$ is probably the LOCAL SYSTEM, which is the process tha the SQL Server Service is running under:
When xp_cmdshell is invoked by a user who is a member of the sysadmin fixed server role, xp_cmdshell will be executed under the security context in which the SQL Server service is running. When the user is not a member of the sysadmin group, xp_cmdshell will impersonate the SQL Server Agent proxy account, which is specified using xp_sqlagent_proxy_account. If the proxy account is not available, xp_cmdshell will fail. This is true only for Microsoft® Windows NT® 4.0 and Windows 2000. On Windows 9.x, there is no impersonation and xp_cmdshell is always executed under the security context of the Windows 9.x user who started SQL Server.
Obviously, settting the ENTIRE SQL Server service to run as a fixed account or even a domain account is probably not appropriate for client sites. Any opinion to the contrary is welcome.
In reading Kirk Haselden's walkthrough for setting up a SQL Agent Proxy, this seems incredibly involved. Before I go through this exercise, can anyone validate that this is the way to go for doing SSPI?
A work-around is to use SQL Server Auth for the connection managers and use configuration files to try to obfuscate these details, but my preference would be SSPI/Windows Integrated.
Thanks.
Hi,
I have a package which has 2 file system tasks and 2 data flow tasks all in a for each loop container. if i execute the package from the development studio its executes fine but when i try to run it from the command prompt using the dtexec utility..it just runs upto the first data flow task and then it hangs unexpectedly.
Any help on this would be really appreciated.
Thanks
Aashna
I have a legacy extraction ("E") .NET 1.1 application that is still going to be the driving force for our ETL process. We are going to be utilizing SSIS for "T" and "L". Now, the "E" phase is running on an application server where we have .NET 1.1 framework installed and working. The SSIS packages are running on a separate SQL Server. The problem here is - how do we call the SSIS package and be able to pass in the right parameters from this .NET app that runs on a separate box? We would like to use DTEXEC to call the remote SSIS packages through Integrated Security. The SSIS packages are stored as File System packages.
View 3 Replies View RelatedWhen I try to execute a package (in sql server) using DTEXEC I get the following error. The creator of the package is different from the executing user of the package. But I have also set EncryptionLevel FROM EncryptWithUserKey TO DontSaveSensitive (Which I assume should resolve this issue), re-imported the package to sql server, but the error remains the same. Any pointers?
The utility was unable to load the requested package. The package could not be loaded.
Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 3:18:56 PM
Could not load package " est1" because of error 0xC0014062.
Description: The LoadFromSQLServer method has encountered OLE DB error code 0x80040E14 (Only the owner of DTS Package 'test1' or a member of the sysadmin role may create new versions of it.). The SQL statement that was issued has failed.
Source:
Started: 3:18:56 PM
Finished: 3:18:56 PM
Elapsed: 0.328 seconds
A colleague of mine is having problems when trying to schedule package execution via a .bat file that executes a .dtsx on a sql server (not file system). The scheduling system that is employed by the company requires a .bat file to execute the package. The packages themselves move data from AS400 servers to SQL Servers. Occasionally (very randomly) when the scheduling system runs the statement in the bat files, the package prompts for password information (for connectivity).
We've tried a number of solutions to this, mostly on the "ProtectionLevel" property of the package itself. We did some research and it seems as though there are a few options.What is the best solution to eliminate this from happening? We certainly don't want to have people checking to make sure the packages don't prompt for passwords.
Thanks.