hi all,
i have a huge database and i am using Cursor to retrieve data and with each fatched data i m doing some operation....as my database is increasing the time duration to execute the cycle is also increation hugely....how to solve it??
thanks,
Happy new year to all! Now a question...
I added a new column to StagePayments table - Activity - which is supposed to end up being the same as the JobActivityID from the JobActivities table. Basically, I need to get JobActivities (JA) info and put it in the StagePayment (SP) column. Problem is there are duplicate JA/Descriptions and SP/Activities, so what I need is to take the first sequence SP/Activity and grab the first JA/JobActivityID that matches for a particular JobID. Then get the next one of each and so on and so on...
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Tables...
CREATE TABLE [dbo].[StagePayment] (
[PaymentID] [uniqueidentifier] NOT NULL ,
[JobID] [uniqueidentifier] NOT NULL ,
[Paid] [bit] NOT NULL ,
[Sequence] [smallint] NOT NULL ,
[Amount] [decimal](10, 2) NOT NULL ,
[Comment] [varchar] (2000) COLLATE SQL_Latin1_General_CP437_BIN NULL ,
[Activity] [varchar] (30) COLLATE SQL_Latin1_General_CP437_BIN NULL ,
[ActivityID] [uniqueidentifier] NULL
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[StagePayment] WITH NOCHECK ADD
CONSTRAINT [PK__StagePayment__457442E6] PRIMARY KEY CLUSTERED
(
[PaymentID]
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[StagePayment] WITH NOCHECK ADD
CONSTRAINT [DF__StagePayme__Paid__4668671F] DEFAULT (0) FOR [Paid]
GO
CREATE INDEX [IX_StagePayment] ON [dbo].[StagePayment]([JobID], [Sequence]) ON [PRIMARY]
GO
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
CREATE TABLE [dbo].[JobActivities] (
[JobActivityID] [uniqueidentifier] NOT NULL ,
[JobID] [uniqueidentifier] NOT NULL ,
[Sequence] [smallint] NOT NULL ,
[Activity_Status] [char] (1) COLLATE SQL_Latin1_General_CP437_BIN NOT NULL ,
[Description] [char] (30) COLLATE SQL_Latin1_General_CP437_BIN NOT NULL ,
[PlanStartDate] [datetime] NULL ,
[PlanEndDate] [datetime] NULL ,
[ActEndDate] [datetime] NULL ,
[AmountDue] [decimal](10, 2) NOT NULL ,
[CanDelete] [bit] NOT NULL ,
[Comments] [varchar] (2000) COLLATE SQL_Latin1_General_CP437_BIN NULL
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[JobActivities] WITH NOCHECK ADD
CONSTRAINT [PK_JobActivity] PRIMARY KEY CLUSTERED
(
[JobActivityID]
) WITH FILLFACTOR = 90 ON [PRIMARY]
GO
ALTER TABLE [dbo].[JobActivities] WITH NOCHECK ADD
CONSTRAINT [DF_JobActivities_JobActivityID] DEFAULT (newid()) FOR [JobActivityID]
GO
CREATE INDEX [IX_JobActivity] ON [dbo].[JobActivities]([JobID]) WITH FILLFACTOR = 90 ON [PRIMARY]
GO
CREATE INDEX [IX_JobActivity_1] ON [dbo].[JobActivities]([JobID], [Activity_Status]) WITH FILLFACTOR = 90 ON [PRIMARY]
GO
CREATE INDEX [IX_JobActivity_2] ON [dbo].[JobActivities]([JobID], [ActEndDate]) WITH FILLFACTOR = 90 ON [PRIMARY]
GO
CREATE INDEX [IX_JobActivities] ON [dbo].[JobActivities]([JobID], [PlanEndDate]) WITH FILLFACTOR = 90 ON [PRIMARY]
GO
CREATE INDEX [JobActivities53] ON [dbo].[JobActivities]([JobID], [Description], [ActEndDate]) WITH FILLFACTOR = 90 ON [PRIMARY]
GO
CREATE INDEX [JobActivities50] ON [dbo].[JobActivities]([JobID], [Description], [PlanEndDate], [ActEndDate]) WITH FILLFACTOR = 90 ON [PRIMARY]
GO
CREATE INDEX [IX_JobActivities_6] ON [dbo].[JobActivities]([JobActivityID], [Activity_Status], [Description]) WITH FILLFACTOR = 90 ON [PRIMARY]
GO
CREATE INDEX [IX_JobActivities_1] ON [dbo].[JobActivities]([JobID], [Sequence], [Description], [JobActivityID]) ON [PRIMARY]
GO
CREATE INDEX [IX_JobActivities_2] ON [dbo].[JobActivities]([JobID], [Sequence], [ActEndDate]) ON [PRIMARY]
GO
ALTER TABLE [dbo].[JobActivities] ADD
CONSTRAINT [FK_JobActivity_Job] FOREIGN KEY
(
[JobID]
) REFERENCES [dbo].[Jobs] (
[JobID]
) ON DELETE CASCADE
GO
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
My example for one single JobID...
In JA -
JobActivityID Seq Description
34969C69-FF70-4313-91CC-43921DB3D74D 18 FOLLOWUP
48ACFEEE-3349-4F16-83E0-58F9B19E28E5 16 INSTALL
22507D44-6D0D-42DE-A211-9C23FDFCD19D 5 PLOTPLAN
BA88D04E-EBAE-40DB-A2C9-F909463D7F22 1 THANKU
83C48207-895B-4775-A62D-07059D8DEB62 10 NOTCUST
DBB8DF00-E26B-4E6F-9482-08E8CFE1588D 11 ROOMORD
BF621E91-E819-4F84-B507-0AA644D5C3F6 0 DWNPAY
6F595880-59D9-4E55-845D-19B477E8B179 2 THANKU
86D0A650-3B72-47E1-BDC2-2CA177DC3D53 12 NOTCSTRM
B0ABCC4C-A626-41C2-890C-3B9580326774 13 ROOMREC
F131C6FF-A86C-4527-A580-60FF7D3F0164 19 1YRFLWUP
7132625C-8E8B-4748-9176-6F06E8D0F20F 17 ARCMNT
AE06A938-323B-46EA-BA11-7D17B0985ACC 15 24HRCALL
DBEF21DF-35DA-48DE-8BF5-7F4A0EC0FA7A 14 24HRCALL
EBC15C77-95D5-4C42-AD88-861F9DD7688B 9 RECPERMT
97D3D755-4B6F-4564-842B-A06945AA8890 8 SUBPERMT
CAACAACA-3B97-41D5-9A4A-A4E3E963D0BF 6 SUBCAD
0C3CB2E0-F4E9-43CD-81E4-ACE9F4022033 3 PHONCALL
42D498BE-308A-413E-965D-ADE7A7A21B97 4 MEASURE
7654C5E3-BED5-4F78-ADC8-DD4E283ADDEE 7 RECCAD
In SP -
Seq Activity ActivityID
1 NULL
2 24HRCALL
3 24HRCALL
4 INSTALL
I need to get SP to end up looking like this -
Seq Activity ActivityID
1 NULL NULL
2 24HRCALL DBEF21DF-35DA-48DE-8BF5-7F4A0EC0FA7A
3 24HRCALL AE06A938-323B-46EA-BA11-7D17B0985ACC
4 INSTALL 48ACFEEE-3349-4F16-83E0-58F9B19E28E5
I have tried various versions of this...
begin transaction
update StagePayment
set Activity = (Select J.JobActivityID
from JobActivities J (nolock)
inner join StagePayment SP (nolock) on J.JobID = SP.JobID and J.Description = SP.Activity)
where Activity is not NULL
way too basic as I get this error...
Server: Msg 512, Level 16, State 1, Line 2
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
The statement has been terminated.
I know somehow I have to get the duplicate Activities in the same sequence as the Descriptions, but that's where I'm stuck?!?
If anyone is able to offer suggestions on how to get this to update correctly, I'd be very happy to hear about it!
Thanks in advance!
Tiffanie
Hi,
I need to query a database for a recordset and insert this into another database row-by-row.
For each record I want to provide a time of insert, but for each insert this time has to be incremented by 1, the time format is HH:MM:SS.0000 so for each inserted record the last decimal point would increment by 1.
Can I do this without a cursor ?
Any additional info I will provide gladly.
Thanks!
Application is a Work Tracking/Timesheet database.The increments of work are stored in the TimesheetItem table. Thiscontains, inter alia, the Work Code, the Start and the Duration thatthe employee spent that day on a particular project.Some employees in the Network Support Department don't complete astandard 7.5 hour day for various reasons, so for every Network Supportperson I need to update these particular days with an amount to bringthe total day's hours to 7.5.This SQL will get me a list of all TimesheetItem records for thepersonnel concerned.SELECTTimesheetItem.TypeID,[Work].WorkCode,TimesheetItem.Start AS Start,SUM(CAST(TimesheetItem.DurationMins AS float) / 60) AS HoursFROMTimesheetItem LEFT OUTER JOIN[Work] ON TimesheetItem.WorkID = [Work].WorkIDWHERE(TimesheetItem.EmployeeID IN(SELECT EmployeeID FROM Employee WHERE DepartmentID = 2))GROUP BYTimesheetItem.TypeID, TimesheetItem.Start, [Work].WorkCodeHAVING(TimesheetItem.Start >= @FromDate) AND (TimesheetItem.Start <= @ToDate)ORDER BYTimesheetItem.StartWhat I need is to group these records by EmployeeID where theaccumulated hours per day are < 7.5, so that I can then insert anincrement to make up the difference.I'm writing this from home and I don't have access to the tables toprovide a script, but there's nothing untoward there.Hope someone can help!ThanksEdward
View 10 Replies View RelatedI defined a stored procedure with a cursor inside for updating data.
When I call it from an MSAccess client, it fails.
When I execute it directly in a ISQL/w windows, it doesn`t fail but it displays me the data (wich is the reason for failing from MSAccess).
Do somebody know if I could do it without displaying data in the screen ??
I need to use WHILE to avoid Cursor under certains conditions.
My SELECT statement is:
SELECT ref, ano, numberofyears ,nreint, naoreint,degress,
tabela, tax, taxamaxima,[evactual],
[evaldepact],[ereintact],nrregbt,[taxAmtAno]
FROM deprec
ORDER BY [ref] ASC
numberofyears= 100 /tax for exemple for a good where lifecycle is 4 years ,ex:
Tax = 25% Then 100/25 = 4 years
I see this WHILE script, but i need to run :
1. for each REF + Until years < 4 in this exemple, because i have goods years depend on Percent.
the WHILE script i see is:
DECLARE @table1 TABLE (Id int not null primary key identity(1,1), col1 int )
INSERT into @table1 (col1) SELECT col1 FROM table2
SET @num_rows=@@ROWCOUNT
SET @cnt=0
WHILE @cnt<@num_rows
[Code] .....
My doubt is how to make the LOOP for each REF until Year < 4 (like my example)
I am trying to think of a way to read a control table, build the SQL statement for each line, and then execute them all, without using a cursor.
To make it simple... control table would look like this:
CREATE TABLE [dbo].[Control_Table](
[Server_Name] [varchar](50) NOT NULL,
[Database_Name] [varchar](255) NOT NULL,
CONSTRAINT [PK_Control_Table] PRIMARY KEY CLUSTERED
[Code] ....
So if we then load:
insert into zt_Planning_Models_Plant_Include_Control_Table
values ('r2d2','planing1'), ('r2d2','planing7'), ('deathstar','planing3')
Then you would build a SQL script that would end up looking like the following (note all the columns are the same):
insert into master_models
Select * from r2d2.planning1.dbo.models
insert into master_models
select * from r2d2.planning7.dbo.models
insert into master_models
Select * from deathstar.planning3.dbo.models
In MSDN file I read about static cursor
STATIC
Defines a cursor that makes a temporary copy of the data to be used by the cursor. All requests to the cursor are answered from this temporary table in
tempdb; therefore, modifications made to base tables are not reflected in the data returned by fetches made to this cursor, and this cursor does not allow modifications
It say's that modifications is not allowed in the static cursor. I have a questions regarding that
Static Cursor
declare ll cursor global static
for select name, salary from ag
open ll
fetch from ll
while @@FETCH_STATUS=0
fetch from ll
update ag set salary=200 where 1=1
close ll
deallocate ll
In "AG" table, "SALARY" was 100 for all the entries. When I run the Cursor, it showed the salary value as "100" correctly.After the cursor was closed, I run the query select * from AG.But the result had updated to salary 200 as given in the cursor. file says modifications is not allowed in the static cursor.But I am able to update the data using static cursor.
Hello,I have a test database with table A containing 10,000 rows and a tableB containing 100,000 rows. Rows in B are "children" of rows in A -each row in A has 10 related rows in B (ie. B has a foreign key to A).Using ODBC I am executing the following loop 10,000 times, expressedbelow in pseudo-code:"select * from A order by a_pk option (fast 1)""fetch from A result set""select * from B where where fk_to_a = 'xxx' order by b_pk option(fast 1)""fetch from B result set" repeated 10 timesIn the above psueod-code 'xxx' is the primary key of the current Arow. NOTE: it is not a mistake that we are repeatedly doing the Aquery and retrieving only the first row.When the queries use fast-forward-only cursors this takes about 2.5minutes. When the queries use dynamic cursors this takes about 1 hour.Does anyone know why the dynamic cursor is killing performance?Because of the SQL Server ODBC driver it is not possible to havenested/multiple fast-forward-only cursors, hence I need to exploreother alternatives.I can only assume that a different query plan is getting constructedfor the dynamic cursor case versus the fast forward only cursor, but Ihave no way of finding out what that query plan is.All help appreciated.Kevin
View 1 Replies View RelatedI'm trying to implement a sp_MSforeachsp howvever when I call sp_MSforeach_worker
I get the following error can you please explain this problem to me so I can over come the issue.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 31
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 32
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16917, Level 16, State 1, Procedure sp_MSforeach_worker, Line 153
Cursor is not open.
here is the stored procedure:
Alter PROCEDURE [dbo].[sp_MSforeachsp]
@command1 nvarchar(2000)
, @replacechar nchar(1) = N'?'
, @command2 nvarchar(2000) = null
, @command3 nvarchar(2000) = null
, @whereand nvarchar(2000) = null
, @precommand nvarchar(2000) = null
, @postcommand nvarchar(2000) = null
AS
/* This procedure belongs in the "master" database so it is acessible to all databases */
/* This proc returns one or more rows for each stored procedure */
/* @precommand and @postcommand may be used to force a single result set via a temp table. */
declare @retval int
if (@precommand is not null) EXECUTE(@precommand)
/* Create the select */
EXECUTE(N'declare hCForEachTable cursor global for
SELECT QUOTENAME(SPECIFIC_SCHEMA)+''.''+QUOTENAME(ROUTINE_NAME)
FROM INFORMATION_SCHEMA.ROUTINES
WHERE ROUTINE_TYPE = ''PROCEDURE''
AND OBJECTPROPERTY(OBJECT_ID(QUOTENAME(SPECIFIC_SCHEMA)+''.''+QUOTENAME(ROUTINE_NAME)), ''IsMSShipped'') = 0 '
+ @whereand)
select @retval = @@error
if (@retval = 0)
EXECUTE @retval = [dbo].sp_MSforeach_worker @command1, @replacechar, @command2, @command3, 0
if (@retval = 0 and @postcommand is not null)
EXECUTE(@postcommand)
RETURN @retval
GO
example useage:
EXEC sp_MSforeachsp @command1="PRINT '?' GRANT EXECUTE ON ? TO [superuser]"
GO
part 1
Declare @SQLCMD varchar(5000)
DECLARE @DBNAME VARCHAR (5000)
DECLARE DBCur CURSOR FOR
SELECT U_OB_DB FROM [@OB_TB04_COMPDATA]
OPEN DBCur
FETCH NEXT FROM DBCur INTO @DBNAME
WHILE @@FETCH_STATUS = 0
BEGIN
SELECT @SQLCMD = 'SELECT T0.CARDCODE, T0.U_OB_TID AS TRANSID, T0.DOCNUM AS INV_NO, ' +
+ 'T0.DOCDATE AS INV_DATE, T0.DOCTOTAL AS INV_AMT, T0.U_OB_DONO AS DONO ' +
+ 'FROM ' + @DBNAME + '.dbo.OINV T0 WHERE T0.U_OB_TID IS NOT NULL'
EXEC(@SQLCMD)
PRINT @SQLCMD
FETCH NEXT FROM DBCur INTO @DBNAME
END
CLOSE DBCur
DEALLOCATE DBCur
Part 2
SELECT
T4.U_OB_PCOMP AS PARENTCOMP, T0.CARDCODE, T0.CARDNAME, ISNULL(T0.U_OB_TID,'') AS TRANSID, T0.DOCNUM AS SONO, T0.DOCDATE AS SODATE,
SUM(T1.QUANTITY) AS SOQTY, T0.DOCTOTAL - T0.TOTALEXPNS AS SO_AMT, T3.DOCNUM AS DONO, T3.DOCDATE AS DO_DATE,
SUM(T2.QUANTITY) AS DOQTY, T3.DOCTOTAL - T3.TOTALEXPNS AS DO_AMT
INTO #MAIN
FROM
ORDR T0
JOIN RDR1 T1 ON T0.DOCENTRY = T1.DOCENTRY
LEFT JOIN DLN1 T2 ON T1.DOCENTRY = T2.BASEENTRY AND T1.LINENUM = T2.BASELINE AND T2.BASETYPE = T0.OBJTYPE
LEFT JOIN ODLN T3 ON T2.DOCENTRY = T3.DOCENTRY
LEFT JOIN OCRD T4 ON T0.CARDCODE = T4.CARDCODE
WHERE ISNULL(T0.U_OB_TID,0) <> 0
GROUP BY T4.U_OB_PCOMP, T0.CARDCODE,T0.CARDNAME, T0.U_OB_TID, T0.DOCNUM, T0.DOCDATE, T3.DOCNUM, T3.DOCDATE, T0.DOCTOTAL, T3.DOCTOTAL, T3.TOTALEXPNS, T0.TOTALEXPNS
my question is,
how to join the part 1 n part 2?
is there posibility?
I'm new to cursors, and I'm not sure what's wrong with this code, it run for ever and when I stop it I get cursor open errors
declare Q cursor for
select systudentid from satrans
declare @id int
open Q
fetch next from Q into @id
while @@fetch_status = 0
begin
declare c cursor for
Select
b.ssn,
SaTrans.SyStudentID,
satrans.date,
satrans.type,
SaTrans.SyCampusID,
Amount = Case SaTrans.Type
When 'P' Then SaTrans.Amount * -1
When 'C' Then SaTrans.Amount * -1
Else SaTrans.Amount END
From SaTrans , systudent b where satrans.systudentid = b.systudentid
and satrans.systudentid = @id
declare @arbalance money, @type varchar, @ssn varchar, @amount money, @systudentid int, @transdate datetime, @sycampusid int, @before money
set @arbalance = 0
open c
fetch next from c into @ssn, @systudentid, @transdate, @type, @sycampusid, @amount
while @@fetch_status = 0
begin
set @arbalance = @arbalance + @amount
set @before = @arbalance -@amount
insert c2000_utility1..tempbalhistory1
select @systudentid systudentid, @sycampusid sycampusid, @transdate transdate, @amount amount, @type type, @arbalance Arbalance, @before BeforeBalance
where( convert (int,@amount) <= -50
or @amount * -1 > @before * .02)
and @type = 'P'
fetch next from c into @ssn, @systudentid, @transdate, @type, @sycampusid, @amount
end
close c
deallocate c
fetch next from Q into @id
end
close Q
deallocate Q
select * from c2000_utility1..tempbalhistory1
truncate table c2000_utility1..tempbalhistory1
Hi All,I am working on Web Application which deals with history data forreports and keeping track of changes.Current Solution :1) For each Entity I am having a column TID (Tracking ID) whichkeep on increasing for an instance of Entity. (so history and presentdata in the same table) . It makes querying the data difficult.2) I am also using month year table for Managing data i.e<TableNameMMYYYY> for a given month and yearPurposed Soluion :1) Using a seperate table so that history and present data isplaced seperately .2) Store All data in one table <TableName>Please guide me on advantages and disadvantages you pin point in thetwo approaches.With warm regardsJatinder
View 5 Replies View RelatedI having a difficult time here trying to figure out what to do here.I need a way to scroll through a recordset and display the resultswith both forward and backward movement on a web page(PHP usingADO/COM)..I know that if I use a client side cursor all the records get shovedto the client everytime that stored procedure is executed..if thisdatabase grows big wont that be an issue?..I know that I can set up a server side cursor that will only send therecord I need to the front end but..Ive been reading around and a lot of people have been saying never touse a server side cursor because of peformance issues.So i guess im weighing network performance needs with the client sidecursor vs server performance with the server side cursor..I am reallyconfused..which one should I use?-Jim
View 1 Replies View RelatedHello,
I have the following query,
SELECT GroupInfo.GroupID, GroupInfo.GroupName
FROM GroupInfo INNER Join DeviceGroup ON(DeviceGroup.GroupID=Groupinfo.GroupID)
INNER Join Deviceinfo ON (Deviceinfo.SerialNumber=DeviceGroup.SerialNumber )
It's out put is as follow:
Group ID GroupName
0 Abc
1 Beta
0 Abc
0 Abc
0 Abc
1 Beta
2 Alpha
Now, I want to make such query which will give me result as a Group ID and Group Name but not in repeating manner, Like,
Group ID GroupName
0 Abc
1 Beta
2 Alpha
Hope I explained what I need to see in result pane.
Thanks,
Junior
In out web application it happens very rarely that same query gets executed more than once meaning that sp_executesql is degrading performance. Does anyone know a way to tell ADO.NET to stop encapsulating queries in sp_executesql? Thank you.
View 1 Replies View RelatedI found some fragmented data pages in my database tables.
I have found out using DBCC Showcontig commands.
I want to remove data fragmentation.
My tables are replicated. Is it possible to remove fragmentation
without using export and import. Please help me in fixing this problem.
Is there any way to fix replication failure with out recreating it.
My replication has failed saying is timout error.error is could not connect
subscriber. But I can able to ping the subscriber and if I create a new publisher and subscriber it is working fine. But existing one is not working.
What might be the possible reason. We have recreated the replication. We droped the existing one and recreated it. It took around 14 hours to sync.
Is there any way to resync with out recreate publication. We are using transaction replication and merge replication.
Vani
Hi All,
Very Ad-hoc requirement I am having.
I've got one table with two columns.
Column Name Data Type
1) Id Integer Identity
2) RemDate DateTime
I've to write one SP/JOB in that there will be an integer input parameter @numofday.
Say value of @numofday is 5 then.... in SP/Job I need to insert 31 - 5 = 26 records to above-mentioned table where date starting from 1st of current month.
This logic can be achieve through looping but if anyone can suggest some better way to achieve this functionality without use of looping.
Thanks in advance,
Jai
I am conducting stress testing for my website and keep getting deadlocks with the following message when one process is adding about 100 records per second and another process is trying to access the data:
Transaction (Process ID 499) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
What do I need to do in my stored procedures to avoid this? I only have ONE stored prcoedure that locks a row while incrementing an ID value. I am not doing any other locks, so is this a SQL Server system lock?
Any advise would be much appreciated. Thanks!
Hi All,I want to avoid using cursors and loops in stored procedures.Please suggest alternate solutions with example (if possible).Any suggestion in these regards will be appreciated.Thanks in advance,T.S.Negi
View 22 Replies View Relatedi'm trying to write a batch that will perform a complex task usingset-based selects instead of a row-based cursor. let me know if you canhelp me figure out how.description of what i'm trying to do:there is TABLE1, TABLE2, and TABLE3i want to select each row from TABLE1, do some analysis on the data ofthat row, and then perform an insert of some data into TABLE2, and somedata into TABLE3how do i do this in a T-SQL batch?
View 9 Replies View RelatedI have a long sql batch that does this:1. Gets a list of all tables in user database that start with name COREdeclare@tablenamevarchar(30),@commandvarchar(2000),@cntintegerdeclare GetCOREOids cursor forselect sysobjects.namefrom sysobjectswhere ( OBJECTPROPERTY(sysobjects.id,N'IsUserTable')=1 ) and( sysobjects.name like 'CORE%' or sysobjects.name ='CMNSTRStructGeomBasicPort') and( sysobjects.name not like 'CORESpatialIndex%') and (sysobjects.namenot like 'COREDeletedObjects%') and( sysobjects.name not in('CORERelationOrigin','CORERelationDestination') ) and( sysobjects.id in ( select id from syscolumns where name = 'oid') )for read only2. Populates a temporary table with distinct oids from the list.create table [#tSP3DCoreOid] (oid UNIQUEIDENTIFIER)open GetCOREOidsfetch GetCOREOids into @tablenamewhile ( @@fetch_status = 0)beginselect @command = 'insert into [#tSP3DCoreOid] select distinct oid from' + @tablenameexecute(@command)--print @tablename + ' rows: ' + convert(char,@@rowcount)fetch GetCOREOids into @tablenameend /* while */--Clean upclose GetCOREOidsdeallocate GetCOREOids3. Creates a cursor to get "invalid" oids from 2 other tablesdeclare DanglingRelation cursor forselect oid from [dbo].[CORERelationOrigin] RO where not exists( select oid from [#tSP3DCoreOid] where oid = RO.oid )unionselect oid from [dbo].[CORERelationDestination] RD where not exists( select oid from [#tSP3DCoreOid] where oid = RD.oid )4. Loops thru. the cursor examining each oid and then calls aStoredProc to update another tabledeclare @objectOid uniqueidentifierdeclare @tempOid uniqueidentifieropen DanglingRelationfetch DanglingRelation into @ObjectOidwhile ( @@fetch_status = 0)beginset @tempOid='00000000-0000-0000-0000-000000000000'if left(@ObjectOid,8)='00000002'select @tempOid=oid from COREToDoList where Oid=@ObjectOidelse if left(@ObjectOid,8)='00000003'select @tempOid=oid from COREToDoRecord where Oid=@ObjectOidelse if left(@ObjectOid,8)='00000004'elseselect @tempOid=oid from COREBaseClass where Oid=@ObjectOidif @tempOid = '00000000-0000-0000-0000-000000000000'BEGINexec CORESetObjectIntegrity @ObjectOid, 2ENDfetch DanglingRelation into @ObjectOidendclose DanglingRelationdeallocate DanglingRelationdrop table [#tSP3DCoreOid]Now the #tSP3DCoreOid temp table can sometimes get as many as 7.5million rows and this is making the batch fail on SQLServer as it runsout of memory.I think the problem is the cursor here and would like somefeedback/tips on how to best optimise it.thanks a lotSunit
View 4 Replies View RelatedHi, all!
Having a table with a varchar(10) column, I try to insert a row where the data for that column is more than 10 characters long. No surprise, I get a MSG 8152 error.
What I want is to get the overlong data clipped to the maximum column width, and no error. Is that possible?
Hi everyone,
As first task I've got Data Flow which loads a set of data into a .NET recordset.
After that, inmediately flow execution goes to For..Each Loop. I'd like to avoid go in that direction when Data Flow returns zero rows.
How can I do such thing?
I've tried this on Precedence Constraint Editor but it doesn't work..It doesn't recognize EOF keyword..
@[User::ResulSet] == EOF
Thanks in advance for your input,
Enric
Hi All,
I use a report expression something like this.
= SUM(Fields!MTD_TotNetCOAmt.Value)/SUM(Fields!TotBalance.Value)* 12
When Both fields have 0 vlaues, it gives a error massege. How do I avoid this?
Thanks
Hi all,
I have 10 tables with unique values such as mobile no: and message in each table.But now the problem is that this same mobile no: may be there in other tables.How can i eliminate the records from other tables.Can anyone tel me a suggestion.
Thank U.
Hi,
I'd really appreciate advice on now to avoid displaying duplicates in a resultset like the one below, only displaying the first field once and all the rows that correspond to that field all listed listed below. Distinct doesn't work. Thanks
Customer Name Address
============= =======
Big Bob's Books 123 Stone Lane
456 Seaside Drive
789 Waterhouse Square
1234 Mystery Drive
5678 Simple St
Tiny Tim's Tools
Tiny Tim's Tools
I have to admit, I'm usually using the MySql database, but in this particular case I have to use MSSQL 2000.
Over to my problem.
I'm building a web-based system (who isn't these days) in which the user types arbitrary information that is published when the user pushes the save button. Nothing new about that.
Here comes the tricky part, when the user wants to edit an existing item I copy all information in the database and sets the id of the 'edit-copy' to the negative value ( id 45 becomes id -45 for the edit-copy). This is also done on all items in other tables that is connected to the main item.
This way I get a copy that the user may edit without messing up the published information. When the user is done I either delete all the negative items (cancel) or delete the positive items and update the negative to become positive (save).
So far so good, allmost... my problem is that the transaction log grows tremendously.
Is there any other way to accomplish a safe edit that doesn't affect the transaction log as much as my current solution?
Could I be doing something wrong when updateing or deleteing my items?
hate to gripe, but this was bad. I have taken several sql server classes over the years, and have always been happy with the class, but avoid the 2733a (upgrading you database administration skills to sql 2005). Class is poorly devloped and incomplete. Half of the examples were to do things such as mirroring and replication from a command prompt. I thought I was in an Oracle 8 class. It was clear much of this functionality is not complete. In fact most of the class was command prompt based. They had absolutley nothing about the upgrade process from SQL 2000 to SQL 2005. I hope MS is not taking a step backwards, I always thought the strong suite for MS was the enterprise manager tool suite. The instructor did tell me there was an upgrade to the class that just came out, but it has a long way to go.
View 1 Replies View RelatedHow do you avoid phantom inserts? Can you recommend a strategy (or other posts, articles) to avoid "phantom inserts" with the default SQL Server isolation level ("Read Committed").
Thanks!
Hello All,
I have faced a network problem during some days, what forced one of our replications to be stopped.
The Publisher database is a high volume database.
After I re-started the replication, the Subscirber database has its transacting log size increased quickly, because of the high volume of information to be inserted.
My concern is the way it is working, there will be no enough space for the log or for its backup files.
So, I have created a TSQL job within the following commands:
BACKUP LOG database_name
WITH TRUNCATE_ONLY
DBCC SHRINKDATABASE (database_name,TRUNCATEONLY)
It's running every 20 minutes, however the transaction log remains increasing.
I have also changed the db_option "SELECT INTO/BULKCOPY" to TRUE, in order to avoid logging bulk copies, but I believe, it didn't work because it didn't apply to replication process.
Does Anybody know if I can disable the transaction log or avoid this incresing of size during the replication?
Thanks a lot!
Regards,
Felicia Schimidt
felicia.schimidt@br.flextronics.com
I have some SQL scripts for SQL Views and getting divide by zero error. I am using
COALESCE(Field1,Field2,1)/COALESCE(Field3,Field4,1)
This function can avoid NULL but how I can avoid 0 ?
Is there any function in SQL that can take care both NULL and 0 and replace it with 1.
I have a query that maps all products to some customer levels. In this case levels 0,5,7 and 8
DELETE FROM ProductCustomerLevel
WHERE CustomerLevelID IN (0, 5, 7, 8)
INSERT ProductCustomerLevel
(
ProductID,
CustomerLevelID
[Code] ....
Basically this maps all products in a database to these customer levels so that they get a discount.
I know need to create a new customer level, example number 9. These will only have 1 or 2 products applied to it.
How can I change the SQL above so that it does not map those products already in Customer Level 9 to levels 0,5,7 and 8